Satellite L300 - wouldn't connect to the router

Similar Questions

• Satellite L300 - unable to connect to the wireless network

  I have a NETGEAR router and a Toshiba Satellite L300 laptop HP DV2000.

  The HP can connect to my wireless network and also my neighbors network next door (which is not secure)
  However, the L300 can only connect to the network of my nextdoor neighbour even if it can 'see' the NETGEAR network.

  I changed the security from WPA to WEP up to now no security at all, and it seems not to matter.
  The strange thing is that my L300 CAN connect to a wireless network, but not mine!

  And my wireless network works as I can connect from my HP laptop.
  On the L300 it shows 5 bars on the NETGEAR is not a problem of weak signal.

  Any help would be appreciated.

  Try changing the WLAN settings on your router. Compare the WLAN settings on the settings of your laptop and the router.

  Test it with standard B on both devices.
  I mean if your laptop can see neighbours WLAN card wireless network in the laptop must be OK.
  I really thing all is due to wrong WLAN settings.

  Play around with that sort of thing.

• Satellite L300 - unable to connect to my router

  Hi guys,.

  I got this laptop a few days ago, everything works as it is supposed to be except for one thing, I try to connect to my wireless internet signal and it picks up the signal itself as a strong signal, but when I go to enter my WEP it never connects. I can't actually connect to the signal.

  I have another laptop which I can easily connect to my wireless signal.

  I have a wireless cable modem so it Wouldnat be my internet service,.

  Someone at - it ideas? Purchase of an additional Wi - fi adapter would work instead of using the built in Wi - fi? Also, the laptop came with Vista Home Basic installed.

  Any help would be greatly appreciated.

  Thank you guys.

  Hello

  Can you connect to the router, if you disable WEP encryption?
  In addition, WEP encryption is not safe and can be cracked in a few minutes, then you should choose another encryption WPA or WPA2.

  In addition, I would recommend updating the driver WLAN. On the Toshiba site, you can find the most recent version.

  What OS do you have? If you have Vista try disabling the WLAN card feature in Vista Power Management for energy savings.

  Good luck!

• Satellite L500D: WiFi remove connections to the router

  My bars of Toshi Saturday 1,2,3,5 equates to dropped the WiFi but when WiFi is at 4 bars, it's the best thing since the fire.

  Recently, my laptop started to remove connections to the router and the router is that a step of 4-5 come out in the kitchen of my house. And another problem is that my room seems to be a dead zone.

  If I turn on my laptop, I am required to get out of the kitchen and stand near the router until it connected, but if I'm sitting in my room, 3 bars, and said "(the WiFi name) cannot be detected/connected."

  Any who want to enlighten me on what's going on?

  Mr.Delta

  Simply said, the Wlan router signal is too weak and this causes disconnection
  I have some advice for you;

  -Update the WLan driver
  -Card Wlan definition of control; You should go to Device Manager-> properties-> Advanced tab WLan card. You will find some options that allows you to change the standard WLan (802.11 A, B, G, etc.) and you can also check the WLan channel and improve the signal
  -Disable the Wlan Card saving

  Good luck

• Satellite L350 - is not connect to the router

  I had a problem with the radio on my Satellite L350. Even if the router is right next to the computer, it is not for her. It can see if I do a search but only says: connection not available. I have 2 other computers works great on the router. The router is a Netgear.

  Any body can help?

  Hello

  What should I say now? First attempt to update the WLAN driver that you find on the Toshiba WLAN Portal:
  http://APS2.toshiba-tro.de/WLAN/

  Also, check the TCP/IP settings of the wireless network card. If your router supports DHCP, check if this option is enabled. Also make sure that the DHCP client and DNS work properly.

  You use a firewall? If so try turning it off. Maybe it s blocking of the Internet connection.

  By the way: what OS do you have?

• Satellite A300D - unable to connect to the router

  I can't connect to my wireless modem that works correctly for other laptops at home.

  I bought this phone 2 weeks ago and when I discovered that it can not connect, I took it to the shop, I bought it. Here, surprisingly it connected to wireless internet so they told me that there must be sth wrong with my modem. I reinstalled my modem but still not good. I can connect with other laptops that have vista as well.

  I can view the connections. Sometimes, he tells me that the password is wrong that I'm sure I get right! I even tried to completely disable password security, then it seemed like it was connected, but I could not access Web sites, including google.com. Sometimes it is said that id verification timeout. I reinstalled the wireless driver that did not work. He has no problem with the connection to the local network. I almost tried everything but still can't connect.

  Help, please!

  Hello

  Why you try to reinstall the modem driver if you have a problem with your wireless network card?

  Anyway, if you can plug it into the router in the shop everything should set up and installed correctly on your laptop and the reason must be the router.

  So in your case, I would try to update the firmware on your router.
  If you use DHCP, try static IP addresses. Try to also disable filtering of MAC addresses and try another encryption, e. g. WPA2.

• Satellite L300 - does not connect to the grid

  my daughter ran in front of me yesterday and ripped the power cable from the plug, and now the laptop does not connect to the grid. Is there a how to on how to disassemble the laptop so I can try to reattech the plug to the motherboard?

  Thank you

  Hi the horse stable,

  In general there is no technical manual which can be downloaded. These user manuals are not for the public, and I saw manual user on the official website of Toshiba.

  Which means you have to disassemble the laptop yourself or ask a maintainer approved assistance. You can also get new spare parts from these guys there, and they can help you address all of the issues of material. :)

• Unable to connect to the router WLan - Satellite L300D

  Please help me so that I have still a few hairs left!

  I installed WLAN driver on my laptop Satellite L300D with Vista Home installed.

  I see my network in the available connections, but when I go to connect, it will not connect.

  My other two desktop computers can connect to the router without a problem.

  Any suggestions?

  Thank you
  Neil

  Hello

  I think that you didn t try updates. Right?
  Therefore, my first recommendation would be an update of the BIOS and driver WLan.

  Check the current version of the BIOS that is available on your laptop. If the latest version has been released then update the BIOS.
  In addition, to download the latest WLan driver from the Toshiba WLan portal and to update:
  http://APS2.toshiba-tro.de/WLAN/

  On this Wlan site, you will find three different WLan drivers for three types of WLan cards. First check your wireless network card, and then use the right driver!

  See you soon

• Satellite A500 - unable to connect to the WLan

  I'd like someone to help me.

  Have recently bought a satellite A500.
  I'm new in the world of laptops so I'm wrong.
  I connected to a router via a modem, the two netgear, the news.

  Had the two config for my network. Works well as long as ethernet is connected to the router of computer.

  My wireless icon on the front of the laptop is orange.
  If this should be green as the router?

  Pressing FN f8 it tell me wireless is connected.
  When I remove the ethernet cable it tell me to fix the problem, I need to plug in the ethernet cable.
  But I want to go wireless, I'm sure I'm missing something.

  Rang netgear but after that my router and it is not connected to wireless technology they could help me more.
  I use windows7.

  Thanks to anyone who can help me.

  > My wireless icon on the front of the laptop is orange.
  > Should it be green as the router?

  The WLan led can only be ON or OFF. If the light comes on (any color) then it means that the Wlan switch is on!

  It seems that the WiFi is enabled. In this case, you will need to properly configure the WiFi network.
  You can use the own WLan settings in Windows or a Wlan configuration tool like Intel ProSet utility.

  First need choose the right SSID (wireless network name), right of encryption (WEP, WPA, etc.) and password encryption.
  Please note that all of these parameters should be the same on the router WLan and WLan configuration software!

  Please check if the firewall does not affect the connection to the internet as well!

  PS: make sure you use the latest version of the WLan driver
  Here you can find the drivers:
  http://APS2.toshiba-tro.de/WLAN/

  In addition, search and read comments here on the forum!

• Unable to connect to the router

  -Please ignore this message: I did not wait enough to do the factory reset. It seems that launch a factory reset without waiting for 10 seconds only restarts the router.

  Hello

  Today I tried to connect to my router (I do not use it for a few years) and it didn't work at all.

  Initially, I plugged it in just 2 RJ45 cables: one for internet, one for the PC. The computer could not connect to the router (DHCP failed).

  I then restored the factory settings and tried again: same thing, the computer could not find the router via DHCP.

  I tried to force an IP address (IP: 192.168.1.5, mask: 255.255.255.0 Gateway: 192.168.1.1).

  By forcing the INVESTIGATION period, I was able to connect to the router, but when I tried connect to 192.168.1.1 with admin/password, it wouldn't let me (bad password - don't forget I restored it to factory settings, several times actually). The address http://routeurlogin.net/ is not found (404) and I was unable to go on websites (404). A curious thing is, using this connection, I was able to connect to Skype (and send/receive messages), although the sites Web could not be reached from a browser.

  I'm running out of ideas to solve the problem, but I suspect a hardware problem, so any help would be welcome.

  Yes he did.

  I couldn't find an option to delete my message, otherwise I would have done it.

• Re: Satellite L770 - unable to connect to the WiFi N project

  I can connect when I set my router "mixed b/g/n" but only 54 Mbps but if I change the router 'one n' while I can find the network but cannot connect. My most old laptop, Satellite L500D can connect mode "n" without any problem. These are the only devices connected wirelessly and the problem persists if old pc is turned off. In the interface of the routers, I see my connection has / g, older Satellite mode shows n mode as it should.

  Drivers are updated, router D - link DIR - 615 with the latest firmware.

  Hi JP75,.

  What exactly happens if you try to connect to the router N project? You get an error message or what happens?

  It is not easy to say why the works of N doesn't correctly project but first of all, I would try a driver WLAN official Portal of Toshiba:
  http://APS2.toshiba-tro.de/WLAN/

  Is it in eco mode / normal too?

• iPad can't connect to the router

  Hello

  I have a WRT320N router with firmware version 1.0.01 build 008.  I just got an iPad and so that it can find my router, I can't access the WiFi when I enter my password.  I can use the router with my laptop so I know the login and the password are correct.

  I saw two directors here suggest the same thing.  And one person said it worked.  The same directions were:

  Try changing some wireless settings on the router.

  Connect the computer to the router with the Ethernet cable. Open the router configuration page.

  Click on the wireless tab and put in manual configuration. Change the channel to 11 wireless. Save the settings.

  Go to the wireless tab and click the settings advanced wireless.

  Change the tag to 75 interval, RTS threshold to 2307 and 2306 fragmentation threshold. Save the settings.

  Try to connect to the wireless network again and see if it works.

  My problems are:

  1. I think that my computer is already connected to the router with the Ethernet cable - I want to say that it is an Ethernet cable attached to my computer and my router - in slot 1 on the router

  2 - the only thing I know how to access is the Linksys EasyLink Advisor.  What and where is the router configuration page?

  Thanks - I wouldn't think that if I can't get my router to work, I just lost money on an iPad only WiFi and will instead get one of these devices to attach to the iPad that allows you to connect to wireless internet - like device "clear."

  Read the user guide. The web interface is at http://192.168.1.1/ unless you changed the address LAN IP of the WRT.

• 9.3.4 disabled wifi on an Ipad, but it connects to the router. Just don't download at all

  IPad was working fine, but I've updated to 9.3.4. Now Wireless does not work. Shows connected to the router, but nothing happens, but say unable to connect to the server, error trying to access the internet or by mail. Also turn continuous flashing VPN gray to green, then again, but we have never set up a virtual private network. Don't know if it is connected. Have you tried

  1 disconnection / reconnection to 2 routers that work very well for other devices

  2 reset wireless via settings > general > reset > reset network settings and then hang up again

  3 airplane mode on, wait a few minutes, then shut off again

  Overall, the router will connect to any time, we put the password, but there is no transfer of data. 3 other devices work fine with the router. Don't know where to go from here, or if it is possible to back out from the upgrade. Anyone else having this problem? A research increase the same problem.

  Thank you

  Anything that causes the problem is not specifically 9.3.4, which fixes just a security breach. Have you tried to restart routers?

• Firefox prevents the connection from the router

  WRT120N router Linksys-Cisco, Firefox 22.0

  I discovered that my router rejects all attempts at connection (192.168.0.1, 401 authentication failure "browser can not perform authentication or authentication failed") when you browse to it from Firefox. It allows the connection when the attempt is made of Chrome.

  I remember having long ago something similar with Firefox, but resolved by disabling the option "say it me not to follow the sites", following what connections made; just looked and it is still not verified - if this isn't it.

  I looked a the packet capture and the password IS sent to the router, but it rejects the connection.

  Any ideas?

  "BUT IT WORKS CORRECTLY BOOTED IN SAFE MODE."
  Which prompted me to check the extensions.
  I called, guess what... TAKE STEPS TO TRACK ME.

  (Why is there such an extension if it is built in function?)

  Disabling, allowing the router to connect! I don't know why twice now, try to activate Do not not track eliminated the possibility to connect to the router... but this is the solution.

• HP Envy 4500: Printer connected to the router, but will not print wireless Macbook

  I want my wireless printer to work on my macbook, but I can't. I tried setting up on the HP utility to connect with the router as the mac and printer on but it does not work! It indicates that the download was successful, but the device was not reachable. I don't really know where to go from here and any help would be really appreciated. Thank you.

  Hey @miriamnimmo,

  Welcome to the Forums of HP, I would be happy to help you! I understand that you have the printer set up on your network, but the software says that the device is not accessible. Sometimes the IPv6 may interfere with the connection, and I suggest we disable that before anything else. On the fornt of the printer Panel, scroll down to and then select Wireless. In the wireless Menu, select Advanced settings, then IPv6 and.

  Now we are going to let the router and unplug the power cable (NOTE: do not reset the router), then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  Please let me know if this solves the problem by marking your post as solved (click on Accept as Solution button below). If the problem persists, let me know, I'll watch for your reply.

  See you soon!