Satellite L450-ez1541 - 4 GB of ram but 2.84 usable

Similar Questions

• running windows 7 64 bit sp1 have 6 GB of ram, but windows says usable only 3.29 concerts

  running windows 7 64 bit sp1 have 6 GB of ram, but windows says usable only 3.29 concerts

  JAC

  Where are you seeing the 3.29 "usable"?  It would be fair that the rest is in fast cache.

• Satellite A200-1hv - 4 GB of RAM but system see only 3.1 GB

  Hello

  I have the problem. recently, I bought 4 GB of RAM for my Satellite A200-1hv but system see only 3.1 GB.
  And yes I have tested also on 64-bit vista 64 and Linux 64 systems. In both cases, it shows only 3.1 GB.

  Also when I boot my laptop on the BIOS POST screen it test only 3.1 GB of RAM memory not 4 GB.
  The funny is that when I enter in the BIOS setup, and then in the main settings tab, it shows 4GB.

  Why?
  In the specification, it is written that this laptop supports 4 GB of RAM, but it is NOT!

  BR
  LMAN

  Have you tried to update the BIOS?
  Please do!

  Check if you are using the latest version, and if not then update the BIOS to the State.

• Upgraded Satellite Pro A200 - 4 GB of Ram, but I have only 3 GB

  I have a satellite Pro A200 and I uppgraded from 2 to 4 GB of Ram.
  It was not a problem as long as I have didn't ' tt start Windows Vista.

  In the back when the memory is counting upp there are 4 GB (40XX something) but when I loggen into victory. There is only 3 GB left.

  Whence my A200 Sat stuck the other 1 GB?
  I have now that the graphics card takes upp to 250 MB, but there are still some 750 GB is not there?

  Is there anyone who can help me and solve this problem, I'm just 100% satisfied with my A200 but it buggs me that is missing 750MO I SEAP for.

  Hey Buddy

  For several years he s already known that the Windows 32 bit doesn t recognize all of the 4 GB due to the limitation of the 32 bit OS.
  I think you should visit the Microsoft good, old for details ;)

  For example this one:
  http://support.Microsoft.com/?kbid&ID=929605

  Best regards

• Satellite L850-D2S - 8 GB of RAM but only 2.72 GB available

  D2S-L850 satellite PSKG8R-03S003RU. Windows 8. It's a 4 GB of RAM. In the 'system information' was written 4 (2.72 available) RAM. Set the bar for another 4 GB. He was 8 (2.72 available) RAM. Why only 2.72 available?

  How do you ensure to use more RAM? Sorry for bad translation.
  I am from Russia

  The laptop supports max 16 GB of RAM. So you should be able to use max RAM 2x8GB
  I think you should try this:

  1. press Windows + R key.
  2. then type MSCONFIG
  2. System Configuration window appears on the screen.
  3. click on the tab named "boot".
  4. click on "Advanced Options" and uncheck the box 'memory Maximum.
  5 reset

  I hope this helps, your comments would be appreciated

• Satellite A500 - 1 GR - upgrade memory RAM but 3 GB of usable system memory

  I have upgraded my laptop to 8 GB (2 * 4 GB) ram. A 64 bit version of Windows 7 shows that I have 8 GB of memory, but there are only 3 GB of usable system memory. How do I use the 8GB. My Bios version is 2.00. In the Bios, I have not found the option 'enable the memory remapping feature '.

  This option doesn't exist in the BIOS and everything is controlled automatically. The BIOS update will not change.
  As much as I know about laptops Toshiba you cannot force for laptop to use a set amount of RAM.

• Satellite L20: Installed 1 GB of RAM, but OS see 894MB RAM

  Hello

  I have 2x512mb ram installed in my Sat L20 but system says I only have 894 MB of ram, this means that there is some kind of problem? Thanks for your help.

  If the video card uses system RAM to increase the VRAM, then it is normal.

  Run dxdiag and look in the graphics section.

• I have a Toshiba Satellite C660-212, I need more RAM

  I have a Toshiba Satellite C660-212 I need more RAM but can't find this C660-212 number, can I use the closest number.

  Go here and use their memory scanner and it will tell you what you need.

  http://www.crucial.com/

• Satellite A200 PSAFCA-01H00J upgraded to 4 GB of RAM but can see only 3 GB

  Hello

  * UPGRADE RAM PROBLEMS *.

  I just upgraded my laptop from 2 GB to 4 GB of RAM, * but cannot access the 3 GB *.
  I checked all the documents, and he indicates that the laptop should be expandable to 4 GB of RAM.

  Oddly enough, the site of [mytoshiba.com.au | http://mytoshiba.com.au] does not list my exact model under "abandoned" (as if it never existed!). Although there are a number of similar models according to [http://www.mytoshiba.com.au/web/resource/pdf/discontinued-models/notebooks/satellite/satellite_a200_psafca-01k00j.pdf]

  _OTHER WINDOWS7 64 BIT PROBLEMS_

  I also added a larger HARD drive (the original HARD drive wasn't @ ~ 19 months-) as well as a fresh install of Win7 Ultimate (64-bit).

  I have the Toshiba site and updated 64-bit drivers as much as possible, including the BIOS to Mw10M520.ROM using winphlash64 downloaded on the net, the included winphlash (32 bit) of toshiba did not work as I have already installed Win7 (64).

  Incidentally, I always have problems with "Toshiba Password Utility monitoring" and the software "Driver Bluetooth software" provided by Toshiba to [http://www.mytoshiba.com.au/support/notebooks/satellite/a200/psafca-01h00j/download] - in the absence of "* Win7 64 * ' drivers I used the ' * Vista 64 *" drivers. Is this a problem?

  According to my system info:
  My Chipset is * chipsets Intel® 945 Express Chipset Family *.
  My CPU is * Intel(R) Core (TM) 2 CPU T7400 @ 2.16 GHz 2.16Ghz*
  Installed memory is * 4.00 GB (3.00 GB usable) *.
  System type is * 64-bit OS *.

  What Miss me here people? Help please :|

  Hi mate

  Please check this page of specification Intel chipsets Intel® 945 Express Chipset Support function
  http://www.Intel.com/assets/PDF/datasheet/309219.PDF

  + _1.4.2 system memory account Support_
  + Takes in charge single-channel DDR2 SDRAM only.
  + Memory maximum support 2 GB +.
  + Channel memory Topologies taken in charge: +.
  + Single channel with 1 single SO-DIMM (up to 1 GB) +.
  + Single channel with 1 SO-DIMM (up to 1 GB) and down (up to 1 GB) of memory.
  + Support for DDR2 400 MHz and 533 MHz +.

  As you can see, the Chipset Mobile Intel 945 Express charge max 2 GB of RAM. This means that 4 GB of RAM would not be taken in charge and this is perhaps the reason why only 3 GB of RAM are visible

• Satellite A100 - 750 PSAAR, 4 GB of installed RAM, 3 GB of usable RAM

  I just upgraded my Satellite A100-750 of 2x2gb 2x1GB RAM.
  The BIOS recognizes 4 GB RAM
  but the output of said BIOS then "spent 3 GB RAM system".

  My Windows 7 Pro 64 bit OS said it has 4 GB of RAM, but only 3 GB are used.

  How can I use all my 4 GB of RAM?

  It should not be an OS problem but maybe a one BIOS.
  I tried to update my BIOS (now system BIOS version 6.0).
  but without success.

  Any suggestion?
  Thank you very much in advance,
  Carlo

  Hello

  In order to use 4 GB RAM three different factors are important.

  (1) BIOS
  (2) chipset
  (3) OS

  You will be able to use 4 GB of RAM if these 3 parts provide support for 4 GB RAM.

  Win 7 64 bit is 4 GB of RAM, so you should check first the capable chipset.
  Check chipset in your laptop computer and research on the Intel page for details if 4 GB of RAM are supported.
  If 4 GB of RAM are supported by the chipset then the BIOS does not appear to provide support for 4 GB.

  Welcome them

• Satellite L450 - white screen, Fan Spin, the Green and red lights

  Hello

  I got this Toshiba L450 for a few years now but suddenly will not display anything on the screen. The hard drive does not sound like its spinning, but the fans turn on and then off the coast from time to time. There is green a light orange, but nothing shows it. I tired it on a monitor vga, and nothing shows on the screen. I tried to take the battery and nothing. I opened to check the connections are correct and that they are. I suspect the motherboard that went on the laptop but I was wondering if it was possible to do something else?

  I also took the RAM modules one by one and still nothing. I also used another battery and still nothing. As the dust has been removed fans as there was a lot of dust. The warranty expired a long time ago.

  All the tips, but be very much appreciated.

  Kind regards

  Hello

  To be honest, I don't think you can do something other than control of the RAM and the laptop for external monitor connection.
  RAM failure can cause issues as described in your ad, but it seems that you have already checked the modules of RAM and obviously, this isn't the reason for the question.

  So I think it may be the CPU or motherboard failure
  Motherboards are laptop parts more expensive, and if the laptop is not covered by the warranty, I wouldn't try fix this problem in this case, its value to buy a new laptop of course, that would be the only problem of CPU then maybe you should get in contact with a technician laptop that could test the hardware to get over details on the issue.

• Satellite Pro M50: 896 MB of RAM available instead of 1536 MB

  I recently bought a 1 GB RAM module for my laptop Toshiba Satellite Pro M50. The laptop has already had a 512 MB card installed. I used the scanner memory from crucial.com to ensure what I bought compatible memory.

  I installed the 1 GB module, and now all of my system will show is that I have 896 MB of RAM available. It is of course the module 1024Mo less 128 MB for the execution of the shared video card. My BIOS shows also only 896 MB of available RAM, but if I run a program of analysis such as CPU - Z it shows 2 modules of RAM installed with a total of 1536 MB of RAM available.

  I tried the two RAM modules individually in both slots and the two modules together in both slots. Both work individually and both work in two locations in memory, but combined the module of 512 MB is not displayed. 1 024 MB module seems to be fine. I am running Win XP SP2.

  Do you have any ideas I can do to fix this?

  A second question, I used to play DVDs on my laptop, but recently, when I try, the sound crackles & pop & the DVD skips a little every two seconds... any ideas?

  See you soon!

  Nick

  Hello

  I found similar issues here in this forum and especially he was bound for the bar of memory is not compatible.

  According to the information on the Toshiba Web page module the 1024 MB PC2700 (PA3313U-2M1G) is supported and can be used.

  I put t know what the manufacture of your new memory is, but I wouldn't recommend mix parts. Try to use both modules of the same provider and use both with exactly the same specifications.

  Hope this helps a little

  Good day...

• Satellite L450 - cannot install flash player for IE9

  satellite L450, win7,

  Hi guys

  I have a problem with flash player,
  I uninstalled f/p, then the latest version 11, but always trying to use youtube it tells me that I have to upgrade.
  I did most of the suggestions on different forums IE: I made that IE was set to 32 bits, in fact I tried both 32/64, uninstall each time, without success.

  Any ideas guys,

  Hello

  Are you sure that adds flash drive is not blocked by some security set in IE or security tools?

  What about the use of other internet browsers such as Firefox or Google Chrome?
  Are you able to watch flash videos using these browsers?

• Satellite L450-181 - how to fix alarm HDD/CSD?

  I have a new Toshiba Satellite L450-181.

  Every time I now online, "Toshiba HDD/CSD Alert" message bubble appears.
  If I click on it, a window with the word "dwRet = 12" appears with a button marked "debug". Click on this to find the message "unable to get disk information. Cannot use the alert function. »

  Can someone help me with this please? What it means and how to fix?

  Thank you.

  Hello

  Strange what s... I also use that HDD/SSD Alert good tool, but I never noticed any problems with it. It seems really well run.

  In any case, you should try to reinstall this tool from Web of Toshiba site like Akuma wrote.

  If you have any other questions, please let us know! :)

• Boot with Win7 32 bit and Satellite L450-36 problems

  A friend has a laptop Toshiba Satellite L450-36 Windows 7 32-bit which he thinks has been hit by a Virus. He went to use the laptop a few weeks 3 + ago and concluded that it would not initialize. Now, he has 3 daughters who, before this problem, much used YouTube and say that they were able to see updates Adobe Flash Player appear on the screen at regular intervals, but they have deleted the. When he came to talk about the problem for me, I offered to watch the machine that I have some disks that can cure or at least let me save records Paragon Rescue Kit, Avira Anti Virus Rescue Disk, AVG Rescue Disk & others.

  When I turn on the machine I get a screen with boot Toshiba Leading Innovation one
  Press [F2] for INSTALLATION, press [F12] to the lower boot device selection menu. I leave the machine in operation and a window pops up let me the choice of {HD1}, , , but nothing happens when I select one, then I stop the machine and start again, this time by pressing F2 which takes me into the BIOS. I put in a cd, Paragon Rescue Kit 11, arrived on the BIOS and the CD starts. I did the same thing with the Avira Anti Virus system and it found 4 infections. He then lets me copy all my friend (s) files on an external hard drive, which allows me to complete objectives.

  I started the Recovery CD/DVD Toshiba product and I get a Windows loading files message followed by a bar of Microsoft Corporation loading under him and then there is a black screen with a cursor on it. I did the same thing with a system Windows 7 32-bit repair disc and get the same result black screen empty.

  I am retired and to my knowledge has been gained since the Commodore 64 days, then Amiga and PC now, but it isn't enough for me to fix this problem. I found very frustrating to be able to use a Linux program and see all the programs on the PC, but not actually being able to restart it, and start them! I could probably Boot & Nuke the hard drive, but my friend wasn't t provided with a disc of Windows 7 o/s system couldn t so re-installed without buying again.

  I would be very grateful for any advice on how to get rid of the HD1/FLOPPY/NEXT HD window and a solution for the portable computer so that it starts properly. I took pictures of different screens on the laptop that I could pass if they would help.

  In my opinion, you should remove the HARD drive and connect it to another computer and perform low level set in shape and just delete everything. You can use a tool like this and after doing this put back and try to install the original recovery image using the recovery disk.

  In the past I ve never had these problems, but I think it's the best way to remove all the viruses or malicious applications.
  Test it and thanks for posting comments.