Satellite L450D monitor wouldn't turn on after that laptop turned on all night.

Similar Questions

• Satellite L450d-113 does not turn on

  Hello

  I wonder if someone can help me.

  All turns on my Toshiba Satellite L450d-113.
  I tried to take out the battery and hold the power button / stop for a while but nothing seem to work.

  I have some very important things about this University and I really need help.
  When I plug in the charger the power light blinks for a while then nothing.

  Any help would be really appreciated.

  Thank you...

  First of all, of all the good news:
  Your University stuff on the HARD drive does not seem to be affected because I think that HARD drive is not a malfunction. So you can remove the laptop HARD drive form and could connect to another computer using an external USB 2.5 HDD caddy.
  In this case, you will have access to personal data.

  Now back to the problem laptop.
  It looks like a malfunction of the physical environment and I guess parts like motherboard, CPU modules or RAM can prevent the unit of power.

  RAM modules can be replaced very easily, but I put t know if the RAM is really the troublemaker.
  Maybe you can visit some of downtown specialist for laptop to check the modules.

• IdeaPad Y530: windows does not start after that laptop went to sleep mode.

  Hello

  More great frustration in my life have laptop brand new, this for me.

  After that the laptop goes into mode 'sleep', I'm not able to go back to Windows. All light are there and watch as usual, but there is no Lenovo Welcome logo or any other sign of normal behavior. I can turn it off by holding the button market / stop, but when I turn back the problem is still there. Windows does not start.

  I was able to go back to Windows that day after leaving just laptop without any power and battery.

  I called Lenovo and they suggested to disable the standby modes use put into hibernation. I did it. When the screen saver started, something went wrong, computer got froze and I had to restart, but then again, black screen and no reaction.

  Anyone have any ideas?

  Thanks for the reply.

  That's what I end up doing. OnKeyrecover does not work either so what spoke on the phone with Lenovo. Then he is gone now for repair.

• Windows says not genuine after that laptop warranty repair return

  I sent my laptop to a power supply repair after it failed. He is now back and looks very good, but it says that windows is not genuine, even after that I run the audit online tool. Any thoughts? Back to toshiba (again)?

  You have recovery discs?
  Original installation Toshiba recovery using these discs and laptop image will be valid and active operating system.

• My Satellite C855-10Z wouldn't turn on

  Hello

  I came to the work and my knees don't turn upward. I had left the charger plugged into the wall, but not plugged into the laptop. The laptop ran out of battery during the day because it was not supported. As expected, it won't turn and so I plugged in the charger. A red light nothing happened - flashed temporarily on the laptop when I pressed the button. I tried different Sockets and waited a day, but it still does not work.

  What do you think that could be the problem? It's likely the charger or the laptop?

  I was looking to buy a replacement AC adapter (input voltage: AC adapter to auto-detection (100/240 V) for worldwide use integer; output voltage: 19 V, output current: 3.42 A) but could not find one online. Some of those recommended for the laptop model I (Toshiba Satellite C855-10Z) or at least that they do not have the same appearance. Those on sale do not seem to have the cable connecting the charger to the socket.

  Thank you very much

  Susan

  Hi Susan
  It is not easy to say what the problem is here. Disconnect the power and remove the battery. After doing this press the power for about 20 seconds. Leave the laptop for a while and try to start Notepad using the power supply only.

  What happens when you do this?
  By the way: is guaranteed still valid?

• Satellite A100 PSAA8K stuck in the BIOS after that the BIOS is flashed

  Hi all

  I used the utility to update the BIOS of Toshiba on this machine. It was working fine before, now it is blocked with the Toshiba Startup logo. Pressing F2 or F12 don't work. Pressing ESC. Gives the following error. No TPM or TPM has problem. Everything else seems as usual. It shows the BIOS 6.00, which is what I had in theory flashed to.

  I guess the flash gone bad. Is there a disaster for this recovery procedure?

  Hi guys

  It seems really turned something went wrong during the BIOS update process.
  Perhaps a new module ROM BIOS flashing could solve this problem.

  The point is that you need a BIOS version of special rescue and the drive to reflash the module ROM.
  But only the authorized service provider has such special rescue tool and only the ASP technician can reflash the BIOS.

  So maybe it's not a real solution but a tip how to get a solution
  I would recommend so contact the ASP in your country for the control of the laptop and a reflash BIOS.

  Best regards & good luck

• Satellite A300-15V: keyboard does not work after that Win7 has started

  Hello

  I just installed windows 7 64 bit on my A300-15V and some strange problems:

  When I boot up, the keyboard and the touchpad works until I log in, as soon as the desktop appears my keyboard and trackpad stopped working.
  If I restart the laptop everything seems again works fine.

  Sometimes in the middle of working on something, the laptop and the trackpad will stop working completely and I have to restart the laptop to operate again.

  I installed the chipset drivers listed under my OS, but that has not solved the problem.

  Can someone point me in the right direction?

  Hello

  Hmm, please set the BIOS to default settings!

  You can enter the BIOS by pressing F2 while the laptop starts.

  You also need to install the driver for the touchpad, as far as I know there are two drivers; Synaptics and Alps. The two must be installed.

  Please check also if the touchpad is not disabled by pressing FN + F9 key combination!

  Welcome them

• Windows still ask for activation after that laptop was RMA would be

  My laptop has been recently would be RMA and they replaced the motherboard, keyboard and VGA card. Shortly after receiving this return, Windows began to ask for an activation code. Unfortunately, I didn't write mine down, and the sticker is now faded and illegible. I sent my new laptop because that's what the OEM has asked that I do and they replaced my HARD drive and installed Vista fresh. It does not solve the problem at all.

  Without my original activation code, I don't think I can reactivate Windows. Is there anyway to recover my product key or how to contact Microsoft to get a new one? Because it seems that through my OEM drives me nowhere as they want me to RMA again.

  If your Vista operating system was running, and enabled, we could have helped you recover your product key.
  Unfortunately, this does not apply.

  I'm sorry, but we cannot help you, you don't have a legible label on your laptop...

  It is the responsibility of the OEM to support you.

  See you soon.

  Mick Murphy - Microsoft partner

• password not accepted after that laptop wakes from sleep

  When my laptop is on battery power and idle for a while, it goes into sleep mode. When I want to start working again, Windows does not accept my password. I need to change username, then click on my profile (which displays LOCKED) and only then Windows accept my password.

  After doing a search on the net, I see other Windows 7 users have the same problem...

  Hi Sean, the problem may be that the NumLock key is on in your profile.

  Try this.  Hit the key Windows and r and type regedit and click ok.  Go to HKEY_CURRENT_USER\Control Panel\Keyboard and locate the InitialKeyboardIndicators value.  DoubleClick on it and change the value from 2 to 0.  Click ok and restart.

  Let us know if this helped.

  MVP (Windows desktop experience)

• Impossible to open folders in thunderbird or send messages not sent after that computer (ubuntu) closed all of a sudden while using the program

  I use ubuntu. The computer ran out of battery power and closed while I was using thunderbird. Restart thunderbird later, I found that I could not open folders or send unsent messages. When I close the program, I can't restart it says that thunderbird is already open, but if I use thunderbird killall-9 I tells me there is no thunderbird running process. I checked my profile and there is no lock file or parentlock. Someone suggested the deletion of the database of messages of global reach, but this did not help at all.
  If I am slow in response to questions, please be patient, tonight is my last night with a decentinternet connection - before returning to my African country house where we get 15 KB/s download speeds on a good day.
  Thank you
  Karen

  Do you run a kind of antivirus software on the computer to Ubuntu?

  You have a backup of your profile folder? If not, now is a good time to create a.
  https://support.Mozilla.org/en-us/KB/Profiles-TB#w_backing-up-a-profile

  There could be some sort of corruption in your Inbox folder.
  Try to rebuild the index file in Thunderbird:
  Right-click on the Inbox in Thunderbird, select Properties, and then press the button of the Index to rebuild.

• After that download Modzilla updates, all VERY slow computer, bad enter some applications

  I have a problem with my email and Facebook, I can't in the games that I played, computer is very very slow.

  Hi szagorski,

  Have you looked at the Knowledge Base article, the problems with some Facebook games, chat and more? There is much good in this troubleshooting information. Please don't forget to try all the suggested steps. Each one is precious and can be the answer to your question.

  Hope this helps!

• Apple TV 4 remote stop working after 1 day, I charged all night, but it is still dead. Interestingly enough however, still control the volume on my TV.

  question summed up in the title

  If the volume works the battery is fine.  Sounds like a question of ATV:

  Get help with audio, video, or power on Apple TV - Apple Support

• How to enable the USB Support after that it disappeared from all USB keys on computer, so that the Webcam & printers no longer work?

  My Canon printer and my HewlettPackard printer-copier-Scanner, as well as my Web Cam just stopped working, and when I checked the Device Manager, I found that (IP), (PPPOE) WAN Miniports and (PPTP) had all of their disabled drivers.   I'm unable to re - activate these drivers, and my Web Cam and printers were not included.    Restoration of the system, and many re - start didn't help.  Microsoft Fixit did not help.   Can someone please help me solve these problems?

  Hi WaggaJohn,

  1. What happens when you try to activate?
  2. You receive an error message?
  3. What happens when you connect the webcam to the computer?
  4. How the printers are connected to the computer?
  5. You are able to use other USB devices on the computer?

  The WAN Miniport driver on Windows XP system allows to connect to some networks such as networks wireless large-scale.

  Method 1

  I suggest that you uninstall all the software driver for the webcam and the printer to the computer using Device Manager and Add/Remove programs and then reinstall the updated driver from the printer manufacturer website and check if it helps.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Method 2

  If no USB devices are running on the computer, then I suggest that you uninstall and reinstall all the computer USB controllers and check to see if it helps.

  (a) click Start, click run, type sysdm.cpl in the Open box, and then click OK.

  (b) click on the hardware tab.

  (c) click the Device Manager button.

  (d) expand Bus USB controllers.

  (e) right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

  (f) restart the computer to Windows reinstall all USB controllers on the computer.

  Check if the problem persists.

• How to fix my "low disk space" after that Iv'e tried all system tools?

  I continuousy get a "Low disk space" warning even if I used "Disk Clean-up, System Tools, and I deleted everything in the area of recycling. I, again, restored to July 17 this year.

  My "Operating System" is "Windows 7 - Home Premium 32-bit." If someone reads this has already had this problem and solved, please let me know how to solve. My system has a 3.00 GB Ram and less than half has been used.

  Thans in advance for your help and my email is: * address email is removed from the privacy *

  Not enough space for which drive? This is a warning most likely a not enough space on the recovery partition.

  This occurs when Windows Backup is used without a dedicated external hard drive. Is that what you did?

  If so, access the recovery partition and delete all backups that you sent to there.

  Then you get an external hard drive and backup on it.

  Disk Cleanup removes temporary junk for the most part and only works its magic on the C drive.

• The tab 'fonts' & 'file' in the creative cloud window shows only a wheel of continuous rotation. Even after leaving the window open all night, he showed nothing. I went in the OOBE folder and tried to remove the button Delete the opm.db file, but it i

  I was never able to access these features in the window of creative cloud. I tried to access the OOBE folder to remove the file from opm.db to . There is no file opm.db. I followed the advice from another thread and delete the contents of the OOBE folder. This did not solve my problem. I left the window of creative cloud open for a whole day hoping that would solve the problem. He did not. Thanks for any help you can provide this issue.

  Thomasc11484006 have you tried to run the uninstall program Adobe Creative Cloud desktop application and then put it back?  Instructions and the uninstall program can be found at code error 2 or 50: Creative Cloud desktop application update doesn't have.  You can then reinstall the application using the steps listed in download and install Adobe Creative cloud appscreative cloud.  We invite you to update this discussion if you have any questions about the steps that are listed in each document.