Satellite L650 - Webcam always shows the same picture

Similar Questions

• Webcam always shows the same image

  I was wondering if anyone would be able to help me.

  I recently bought a laptop with a built in camera. However, one of the photos I uploaded to my laptop has frozen, so whenever I try to take a photo or video of the camera, the image appears instead and I can't remove it. Whenever I take a picture, it takes a picture of the image, and there was also a video of the image.

  Please can someone help me

  Hi Emily,.

  Sorry, but I've never heard of this problem. This really does not for me so I can only give you a few tips that you should try.

  First I remove the webcam driver and install the latest version. While you have to restart the laptop. The latest drivers, you can download it here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Also make sure all Windows updates are installed.
  In the worst cases, you must do a fresh install of Windows :(

  By the way: which laptop computer and the operating system you have?

• Satellite A350 - webcam always shows black screen

  Hi folks - I know there were a lot of messages on the web cam works do not.

  I reinstalled the driver several times, I've adjusted and readjust the settings but the webcam still shows a black screen. If I try to record video - I get a failure to render the message.

  Can anyone suggest what I need to do to get the job of web cam?

  Thank you

  DCP

  Hey Buddy,

  Have you tried to activate the night Mode?
  Therefore, to access the properties of the webcam software, and in the next window, click on the night Mode check box.

  I think that this could be also interesting for you:
  http://APS2.toshiba-tro.de/KB0/HTD9402LC0000R01.htm

  To be honest after reading this document, I have problems with my webcam. :)

• ATV4 shows the same picture all the time during the slide show

  I have a few 1000 streaming photo to my ATV4; When you make a slideshow on ATV4 it will be only shuffle through a random selection of about 50 photos. This selection changes but every time I start a new slide show. The option to turn off "repeat photo" is not to make a difference. The problem is both and runs a slide show showing pictures as screen saver. Need some help here... showing the photo is one of the main reasons I bought the ATV. Never had this problem with ATV 1st gen.

  Apple TV uses only a small amount of space to temporarily cache the photos, it is mainly a streaming device. The 1st generation had a hard drive accessible and synchronization capabilities.

• Adobe CC always showing the same updates. Updates do not apply?

  Hey guys,.

  I am a fresh new user of Adobe CC and I met CC gives me the same updates on a daily basis. I click Update all, everything is updated and the next day every single update is here to download again.

  Could you help me?

  Concerning

  Marcel

  Hi benkiesler,

  Uninstall the creative cloud desktop application, steps mention below: -.

  1. Double-click the hard drive > Applications > utility > Adobe Installers.
  2. Double-click the Adobe Creative cloud.
  3. Follow the instructions on the screen.
  4. Follow the instructions after clicking the link Adobe cleanup tool to remove the creative office of cloud.
  5. To download and install, click on the link creative Cloud desktop application.

  Sarika

• Satellite A100-332 always displays the same message at startup

  HI - get the message "press F2 for system utilities or press F12 for the boot' at the start of my Satellite A100-332. I can press F2 but it'll constantly 'Please wait '.
  F12 does nothing. So I'm stuck!

  I read the various threads suggesting place, remove the battery, reinstall the battery, but which does nothing no more. To be fair that the battery had fallen about 20 min charge now before this problem appeared, but there is definitely power with the power supply connected.

  Anyone able to help me with this?

  Thank you very much

  Richard

  Can press you F8 at start up just to see if you can enter advanced startup options?

• Win 7: always show the same user on logon screen

  We have a laptop the meeting, which will serve as a different internal and external users.

  Internal users to connect with the own domain Login.

  External users take a local user named "external."

  How can I set, as each start-up, as 'external' user watch when quick connecting?

  And last Shows no connected user?

  Thank you

  You can get the empty username box to the start using this registry value:

  • http://TechNet.Microsoft.com/en-us/library/cc957392.aspx

  The 'previous' user is stored in the following registry value.  Although not recommended, you might also be able to define this "external", then remove the permissions of the system update this value so that it can never be changed.  But keep in mind, that it is generally not a good idea to start blocking the system out of the registry.
  • http://TechNet.Microsoft.com/en-us/library/cc939710.aspx

• I use the windows photo gallery and wonder why my photos show the same icon and I can't get the image to show up as a thumbnail.

  Can Hello someone tell me why I can't see my photos, unless I saw. I use windows vista with photo gallery as my program. All my photos show the same icon blue landscape.

  Miniatures,

  Open your my pictures location, click on organize in the upper left corner, click folder and search options, click the view tab and uncheck the top option, always display icons and never thumbnails, select apply and save.

  Return to your location of my pictures, change the display of the page on the top of the right side next to the question mark symbol, there is another symbol with a menu drop-down symbol, click it and select the medium or large icons options specified.

  I don't remember if there is a setting in wlpg, separated

  Click the blue file dark in wlpg, then click on the options in the list, go to the display section and examine the options for thumbnails.

• Equium A300D: Software of the camera shows the last picture I took 6 months ago

  Hello

  Just started to use the built in camera on my Equium A300D after a long break (6 months). The software seems to work very well I see that it is in front of the camera in preview and everything seems good. However, when I press the snapshot button it shows the last picture I took 6 months ago. The video feature works very well!

  I uninstalled the software and installed the latest version but the problem remains.

  Any ideas?

  Ron

  Hello

  Sorry, but I really don't understand your problem.
  The last picture shows the cam that Vos took several months ago. And?
  It's a problem?

  I mean the image has been saved in the folder somewhere on the HARD drive and so you can see the photos, I guess that the images have not been removed and that's why they are still available.

  Is not a friend of the problem. Take a look in the webcam folder and delete the photos easy. Isn t it?

• Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  A message on the RAID 0 volume failed is a recognizable error message, but the news is not good.

  RAID, by its nature, requires 2 or more drives.  RAID = redundant Bay of independent (or inexpensive) disks

  RAID 0 is the worst of the different RAID choices.  It increases the performance of hard disk by spreading or striping, data on two disks so that he can read and write more quickly. Unfortunately, such a picture offers no protection of data - in fact, it increases the chances of loss of data since the failure of a disk in the array results in the loss of all data on both drives. RAID 0 configurations are standard on high-end and PCs graphics games and provide a performance gain measurable, albeit modest for games, graphics applications and other programs intense from the hard drive.

  In view of the foregoing, the best course of action for you and your parents is to take the computer to a local computer professional - not a type of place BigBoxStoreUSA or GeekSquad.

• Kodak camera - Win 7 always shows the battery in 10%

  A few weeks ago, I bought a camera Kodak Z990. I noticed some weird behaviors with the 'Z990 Digital Camera' windows that open when I connect the camera to my laptop to Windows 7 via USB.

  • The taskbar displays two instances of the Z990 digital camera window - icon pop up for one is a peak of the camera, the other is a thumbnail of the current window. By selecting either to start from the taskbar displays the same window, and close the window causes the two tiles of the closing taskbar.
  • By clicking on the link to import the photos and the video is ineffective. It is necessary to double-click on the link. The interface would lead me to believe that a single click should work.
  • The most important for me - the descriptive text at the top of the window ALWAYS shows the status of 10% battery, regardless of the actual condition of the battery.

  I've already updated the camera the latest firmware available.

  Is there something that can be done on the side Windows of the things to address these questions, or all them are the result of driver from Kodak, and a solution can only come from Kodak?

  Thank you

  Steve

  In my opinion, you should contact Kodak regarding this issue.

• PS do not show the same colors and LR

  LR and PS now showing the same colors

  I do most of my work in LR and then edit in PS. When the image is displayed in PS it appears same as LR - I can show both applications side by side and the images are the same... As it should be.

  If I then save the image in PS (under a new name) then refresh LR, I see different colors in the new image in LR. It is more obvious (for the moment) in the pictures with a lot of red wines. It seems that the saved image of the PS appears a bit lighter in LR than the original.

  I sRGB in use everywhere - in the camera, LR, PS-I tried with GPU acceleration on and outside.

  I'm now getting annoyed that I can't find the cause.

  I edited as PSD and TIFF and problems remain.

  I don't remember having this problem before, so I saw my recent updates.  LR and PS have been updated. My video drivers have been updated so I their income with no improvement.

  I even saved JPG from LR and PS: the outputs are different, even if I do any changes.

  Clues?

  I solved my problem (the following tips on another thread)...

  I had defined LR in order to apply the auto tone when new images are added.

  It is fine when I load the original of the camera... but also to apply the auto tone to the acquired images of Psalm

  So, I edit in PS, save it... then, when imported LR / synchronize the image, automatic tone applied Informatics and it changed. This explains how LR and PS display different images.

  It is a setting that I recently activated and not a problem with the LR or PS

• Now, all the applications on my Mac air show the same icon and doesn't open, please help!

  I did a quick cleaning on my Mac and now all my applications show the same icon and does not open! TIA :-)

  "quick clean up"...

  It seems that you may have removed some system files, you shouldn't have.

  If your Mac is running v10.7 Lion or later, you can restore OS X using OS X Recovery.

• Why on SIM Manager is showing the same number of SIM 1 and SIM 2?

  I recently purchased Intex FX Cloud and inserted two different operator SIM cards. But the phone showing the same number (SIM 2) for both SIMS (SIM 1 and SIM 2). I have already reset the device, but that did not help. I would like to know how to fix this?

  Figured it out. It was show stored number as has number of SIM (first entry). Some device costs < 3.

• The photos in iPhoto and the same pictures? Is it possible to remove/save the photos to iPhoto?

  The photos in iPhoto and the same pictures?  Is it possible to remove/save the photos to iPhoto?

  Yes, they are literally identical. That is to say, time iPhoto Library and photo library (link) to point to the same files on your drive.

  The two libraries does NOT duplicate these files. If you delete the iPhoto library you will find very little storage space.

  My suggestion would be to leave in place iPhoto library until you have the habit of Photos and know with absolute certainty that all migrated to Photos correctly. Even in this case, you can copy, save a copy on a disk external backup and only remove them from your main drive.