Satellite Pro 4310: changes in the quality of sound several times

Similar Questions

• Satellite Pro 4310 support - looking for Northbridge/Southbridge

  I have recently spoken of an old Toshiba Satellite Pro 4310. Currently, it's obviously a little slow and I am wanting to update is usable.
  I'll buy some more RAM and a new HARD drive for it. He is running Puppy Linux (that I installed) and seems to work very well.

  My problem comes mainly at startup. More time than I would like (ok, I know, it's an old laptop...) as is currently a spare, machine project, I was hoping to try CoreBoot (previously LinuxBIOS)
  However I can't find details specific hardware (Northbridge/Southbridge) anywhere.

  I just contacted technical support Toshiba who were happy to help, but did not have the information that I needed and referred me to "Topaz", who told me that they do not hold number of component specific of any piece of Toshiba, and nor any UK company.

  Can someone please help me here? I really want to get the most out of this laptop.

  Nistur

  Post edited by: Nistur - changed topic back

  Hello

  OK; I'll try my best ;)

  Info on RAM;
  The laptop can be upgraded up to 320 MB and the modules that are supported are SODIMM 144 pin PC100

  The laptop was equipped with internal memory of 64 MB, which is not removable. So only one location is available for the upgrade of memory:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=11466&ft=m&St=3

  Disk HARD;
  The laptop supported disk interface HARD Enhanced IDE (ATA-5).
  Therefore, buy an IDE HDD.

  I'm not sure about the size of the HARD drive. The old HDD was 10 GB. Right? Then maybe a 20 GB might works too but I m not 100% sure.

  Greetings

• Need driver graphics card for my laptop Satellite Pro 4310 W2K

  Hello

  I'm looking for a graphics card driver for my laptop Satellite Pro 4310.
  I need a driver for Windows 2000.

  In the Toshiba download area that I can't find a driver for the 4300 series? There are only the names of laptops as A / S / P / series U and so on. 4300!!!
  I know that the laptop has the S3 Savage/IX card inside.

  Is someone can help me?

  THX...

  Best regards
  Thomas

  Have you checked also option ARCHIVE in type of product?

• Windows XP on Satellite Pro 4310

  Are there problems in the installation of Windows XP Pro on a Satellite Pro 4310, running Windows 2000? Download from Toshiba site has no drivers for this OS and the model (except a BIOS upgrade).

  Hello

  You are right. There is no drivers available on the Toshiba site Toshiba. This unit is very old and I guess that Xp was not available. Unfortunately, there is no other possibility. You can try to install Windows XP but everything also features Toshiba will not work.

• How to replace battery Satellite Pro 4310

  Hi all

  I would like to know how to replace the battery on my old of Satellite Pro 4310, I read it in my paper user. We're supposed to a locking system, but I have not found anything close to the battery... only a drawing with two positions lock and unlock

  So, should I need the lid?

  Thanks a lot for your help

  Roger

  If you want to remove the battery, please follow these steps:

  1. turn off the power to the computer and make sure that the power led is off.
  2. remove all cables connected to the computer
  3 turn the computer.
  4. slide the battery latch to the right, then pull the cover to battery slightly forward an outside elevator
  5. place the battery upside cover and push the latches outward and lift the battery.

  That s all ;)

• Satellite Pro L500 - stops when the power cord removed

  Toshiba Satellite Pro L500 stops when the power cord is removed even with the battery to 100%. I removed the battery and all the indications associated with battery answer correctly. For example turns off, Toshiba Health Monitor also indicates when the battery is removed. If installed Health monitor indicates that the battery is at 100%.

  Someone please help. I have not installed anything new.

  Hey,.

  For me, the matter is clear: the battery can't hold a charge so the laptop will be shut down because it has no power.

  I think you need to replace the battery with a new one and you can get a provider of service authorized in your country. Simply contact the guy and ask that they can tell you how much it would cost.

  You can find a list of all FSA here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• Satellite Pro A110 crashes during the transfer of the large data in LAN

  Hello

  My Satellite Pro A110 crashes during the transfer of the large data in LAN. The network driver is a Realtek RTL8139/810 x Family Fast Ethernet NIC I've been looking through this forum and found some wire whit exactly the same problem, saying that the solution is to update Realtek lan set up in BIOS, not the computer BIOS, but I can't find any link to download the necessary upgrade file. Can anyone tell me please where to find this upgrade file or send it to me directly?

  Thanks in advance

  Is - this transfer of data in the company where you work? Do you want to download data from the server, or how to understand this? How to understand what you mean under big data?

  Have you tried downloading data on the Internet? For example, if you try to download some trailer HD (more than 200 MB)?

• Is there a change in the quality if I burn using controlled x 10?

  Hello!

  I use Windows controlled by burning my videos as backup copies. The lowest speed is 10 x is there any change in the quality of the video on the CD or it will be just the same as copy of the video to one hard drive to another? Thank you.
  See you soon!

  The quality of the video will not be altered with writing speeds. But it is recommended to use the slowest speed available for writing of high quality. This quality is in no way related to video quality - remains the same minimum and maximum speed.

• Help! I get the same e-mail several times... my office to my blackberry?

  I get the same e-mail several times... my office to my blackberry?

  How do I rectify this?

  Try to re-sync and see if that solves the problem.  Your e-mail may be trapped and unable to move from the Outbox to the sent items - and re-synchronization can it empty.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The web page freezes several times during the operation, recovers after about 3-20 minutes, freezes again. Also, lately, the screen lights up and sparkles in a pink/purple color

  I use Internet Explorer as my search engine and internet as my default msn.ca. The web page freezes several times during the operation, recovers after about 3-20 minutes, freezes again. Also, lately, the screen lights up and flashes in a pink/purple one color recovers to normal in 30 seconds approximately. I had an attempt of technician paid for help but couldn't. Can anyone help? Thank you

  Go to start / Control Panel / Internet Options / Advanced section then check the top box rendered = software use instead of gpu rendering / apply then OK.

  Restart all open windows ie11.

  For memory, Bing is a search engine ie11 is a browser and msn... is a home page.

  Any other number symbol use Gear and manage add-ons and toolbars and extensions and disable Adobe Shockwave element

• Adobe CC 2015 bridge hangs before opening (on my iMac). Any Suggestions? I tried all the remedies and reinstalled several times. Help!

  Adobe CC 2015 bridge hangs before opening (on my iMac). Any Suggestions? I tried all the remedies and reinstalled several times. Help!

  Hi all

  We have released a new version of Adobe Bridge (CC 2015) today. This update is available via the Adobe Creative Cloud application.

  We addressed some crash bridge issues experienced on the launch of the application. Please try the new version and are looking for the crash problems you encountered.

  If you are not able to locate the bridge (CC 2015) on the creative cloud application, you must update the creative cloud application.

  Thank you

  Deepak Gupta

• Bridge CC (64-bit) is unable to start the cache even after several time of virtue. Help! So frustrated!

  Bridge CC (64-bit) is unable to start the cache even after several time of virtue. Help! So frustrated!

  Hi julesmom,

  Please reset the Bridge preferences and then try it.

  Measures

  Start Adobe Bridge, and immediately press Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS down) until the dialogue box reset settings appears.

  Select all three options - reset preferences, reset Standard Workspaces and all miniature Purge Cache - and then click OK.

  Reference: troubleshooting errors, freezes | Adobe Bridge | Windows, Mac OS

  Let us know if it works.

  Kind regards

  ~ Mohit

• I downloaded the creative Cloud app several times but it won't work... I get the following message appears when I try to open the app... "Adobe Creative Cloud is necessary to solve this problem. However, it is missing or damaged. Please download and insta

  I downloaded the creative Cloud app several times but it won't work... I get the following message appears when I try to open the app... "Adobe Creative Cloud is necessary to solve this problem. However, it is missing or damaged. Please download and install a new copy of the application of the CC of 'http://www.adobe.com/go/adobecreativecloudapp'. "I went, he did and always get the same answer. I tried to uninstall the program and even copied the program files to a computer that has a working application. What can I do?

  Joseph, here's what you can try:

  1. Delete creative cloud app - https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
  2. Install the cloud creative app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

  Please let us know if that helps.

• Satellite Pro P200: Change the size of partition in Vista?

  Is it possible to adjust the size of the partition after installing?

  I have a Satellite Pro P200 with a shared about HARD disk:

  C: Vista partiton - 17 GB of free to 56 GB
  E: partition of data of-54 GB of free to 55 GB

  I know that the data reader is used by Vista to contain information of recovery.

  However, I would like to know if its possible to reallocate some of its spare production capacity at the Vista drive without compromising the recovery feature?

  Of course, you can change the size of the partitions after Vista installation.

  You can change this in the Vista Disk Manager s

  Here, you could choose the existing partition, and then you could reduce the amount of partitions. This free volume can be added to another partition, or you can create another partition.

• Re: Satellite Pro A40 - cannot find the boot order in the BIOS

  Hi, we have a very old A40 Satellite Pro with a new hard drive.

  We are tryng to change the boot order in the BIOS to recognize the CD player ready for the windows disk. However, there seems to be no option to change the BIOS not boot order, and Yes, we tried the road from Toshiba which suggests press C during startup until and F12 to select the drive during boot, or what kind of work.

  Please can someone help?
  concerning
  Karl

  PS: The current message on the screen during startup is THAT BOOTMGR is missing

  Hi karl1966,

  Have you checked if the CD/DVD drive is recognized correctly in the BIOS?

  Maybe your drive is noisy and you should try another. I put t disc you used but try with Toshiba and Microsoft Windows disk recovery disk.