Satellite L750D - cannot enter the BIOS settings

Similar Questions

• Satellite Pro A300-1LG - cannot enter the BIOS settings

  For some time when I turn the notebook on the page where it appears the Toshiba logo are not displayed and I can't get into the BIOS.

  And put back two or three times and then reappear details.

  I tried to reinstall the BIOS, but the BIOS installation tells me that the version I installed is the existing one.

  Do you have any suggestions?

  + The message was edited: assignment has been translated.

  *@manona*
  Please post in English. This is a user to user community where the English language is required!

  (* 1) * my knowledge the CMOS battery is soldered to the motherboard and cannot be replaced like for example on desktop PC
  (* 2) * remove the CMOS battery would NOT reset the BIOS nor would be to remove the passwords.

  If I understand your problem, you are not able to access the BIOS, but you can start the laptop and the system. Is this correct?

  You have a kind of password (user / supervisor password?)

• Satellite L755-129 and Win8.1 - cannot access the BIOS settings

  Hello

  I have a L755-129 satellite and I have the version of windows 8.1 update in my laptop. I want to open the bios of my computer and I can't do it?

  What is going on? Also I can't find in the windows recovery Panel. Key F2 and F12 does not work, when I press it, the laptop starts beeping beep and starts in windows.
  Can someone help me? I don't want windows 7 I like windows 8.1.

  Thank you for your help

  It's really good that you posted this question. So far on this forum many people ask the same questions, but all have been at the origin of new machines of Win8.
  Now we have the situation with the old machine Win7 but with Win8 preinstalled.

  Solution for other people needed to proceed to a complete stop and after doing this, it was possible to enter the BIOS settings. Check it please http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm

  This situation does not for me so here's a question for you:
  When you start your laptop, I guess you can see the Toshiba start screen. With F2 option is shown on the bottom of the screen?

• Satellite C55 - A - 19(d) - how to enter the BIOS settings?

  Hello

  I recently bought a * laptop Satellite A-C55-19 D * with no operating system preinstalled, so I installed Windows 8.1.
  My problem is that * I can't get to the BIOS menu *.
  I turn on the computer, but I can't see any invitation to "press F2 to enter setup". I get only a screen that has just the + Toshiba Leading Innovation > + notice, then the Windows 8 points of spinning...
  I could type or hold F2, F12, ESC, DEL, but nothing is coming. I also tried to press the Fn + F2 key combination.
  What I have to enter the BIOS setup?

  Thanks in advance!

  Proceed to a complete stop as described here - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
  After that restart your laptop, and then press F12. There you should be able to enter the BIOS settings.

  Check it out.

• Satellite P50T-A01C - how to enter the BIOS settings?

  Can someone tell me please how to enter the bios on the Satellite P50T-A01C
  I tried fn f2, f10, delete, not go...

  Does anyone know how to get?

  Thanks in advance.

  If you use Win8, you must proceed to a full stop, and then after the new departure enter the BIOS settings.
  Please check - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
  Try to please and post comments.

• Satellite L310 - I can not enter the Bios settings

  Dear team,

  I have a toshiba that is always on warraty.
  Is there anyway you can help me.

  It ceased to operate effectively. It does not exceed the Bios.
  By that I mean you reach the Bios screen, but you can not enter the Bios settings.

  Details
  model: toshiba Satellite L310

  What exactly do you say: you reach the Bios screen, but you can not enter the Bios settings?
  The BIOS is secured by password or what?
  You see a splash screen of Toshiba for short time?
  Is it possible to start the Windows operating system or to recover the laptop?

  Please publish more details!

• Satellite 1900-303: changed the BIOS settings, and now I can't boot from the CD drive

  Can anyone help, I inadvertently changed the BIOS settings, and now I can't get the CD player to boot the pc back to the default settings, Windows xp seems to work ok as is the cd player.
  If someone has the original settings, I would be grateful for any help.

  Derek has soon

  Hello Derek

  Use the F2 key to enter the BIOS settings and change the order of boot devices. This option is under the STARTUP tab. Otherwise, you can insert the recovery CD when the unit is turned OFF. Turn it on and immediately press the C button. keep it down for a few seconds and unit is forced from the CD/DVD drive.

• Tecra M5 cannot enter the BIOS to change the setting too boot from cd first

  Tecra M5 cannot enter the BIOS to change the setting too boot from cd first

  I bought on ebay and the seller sold me a dubious version of xp so I want to format and install my own at the start he said:

  The Intel Boot Agent GE v1.2.31 initialization
  KE - E05: the LAN adapter's configuration is corrupted or has not been initialized. Boot agent cannot continue

  Hello

  The message looks like you tried to boot and install Windows LAN

  If you want to change the boot order, I recommend pressing the F12 key, immediately after that the laptop was turned on!

  A new start menu should appear, then you can choose the reader of CD/DVD (ODD) and a boot device.

  Also by pressing the C button should allow you to boot from the CD inserted, bootable.

  Welcome them

• Satellite R830: How do the BIOS settings password protected?

  Hi all

  I installed a software protection against theft in my Satellite R830, but he suggested that I adjust the settings in the BIOS so that it will start only from the hard drive, and to make sure that no one else can modify it (if it is stolen), the BIOS settings are protected by Word.

  Can someone tell me how to access the BIOS at startup settings upward?

  Hello

  You can set the BIOS settings by setting the BIOS password.
  If someone would like to change the BIOS settings, the password of the BIOS would be necessary.

• Dynabook: How to enter the BIOS settings?

  I have a CRC Dynabook V2/470. How can I get into the BIOS
  settings on this laptop?

  Hello

  This device is not known to me, but I guess that you can enter the BIOS setting by pressing the F2 key or ESC in combination with F1.

  Good bye

• Can not enter the BIOS settings

  Hello. I can't enter the Bios on z580 with 8.1 windows settings. I tried everything, including now shift with bios stop and accsesing under windows, nothing seems to work and windows strarts just straight up normally. Also, I can't update to solve this problem. I hope someone can help.

  Thanks for confirming.

  In your post original, you said 'change of outfit with the judgment', so I wanted to be sure that you try SHIFT-restart.

  Have you tried to stop completely and pressing the button "novo" (a recovery key). On my Win8.1 Yoga 2 Pro, that brings up a menu containing several elements, which is the BIOS Setup.

  Kind regards.

• Computer will not conduct the office and cannot enter the Bios.

  Original title: cannot get into the BIOS

  When I turn on the computer, the logon screen is shown with details of the computer.  The computer won't proceed beyond this point.  So I can't enter the BIOS when I press the DELETE key and there is no way the computer goes to the office.    What can I do?

  Hi Ivor,

  1. you receive messages or error codes when you try to start in normal mode?

  2. did you of recent changes on the system?

  Usually, you must press a key (for example, F2, F12, DEL, ESC) or a key combination whenever you turn on your computer but before Windows starts. The choice of the function key varies depending on the brand of your computer.

  For more information, you can consult the following article:

  BIOS: Frequently asked questions

  If you are unable to boot into normal mode, then check if you can boot into safe mode and let us know the results to proceed to further troubleshooting.

  You can view the following items to start in safe mode.

  Startup options (including safe mode)

  Start your computer in safe mode

  Hope this information is useful.

• Can not start my old Satelite A100-168 or enter the BIOS settings

  Hi all

  My problem and simple to explain:
  When I turn on my laptop, it's as if it was on, but nothing happens.
  The HARD drive led is not active.
  It is also impossible to go into the BIOS settings. The ESC key does not work.
  Everything is black.
  I tried to put a boot disk, but nothing happens.

  So is - anyone help me?

  Thanks in advance

  Message was edited: assignment has been translated

  From my point of view of the defective material, any party may cause the described problem.
  Even only one defective memory card could prevent the laptop to boot the system.
  Of course, also the dysfunction of the BIOS EPROM module would prevent execution of the power on self test and ultimately, it would mean that laptop may not illuminate correctly.

  I think that there is no general solution... parts must be checked; one by one.
  In the worst case, there is a motherboard problem and I think that in this case it s not worth to fix the unit because of the high cost of motherboard.

• Cannot change the BIOS settings

  Hi all, I hope someone can advise on this? I have a HP Pro X 2 612 G1that I am unable to change the BIOS settings on. I can access the BIOS, but the options are grayed out. I have updated the BIOS to the latest version without the determination of the question. Any information is appreciated.  Thank you...

  Hi, I have found the BIOS can not be change, unless an administrator password is set for the BIOS for a system used at home I have never set a BIOS password and think it should be owners choice but that I'm just a grain of sand in this big world! Thank you all

• HP G62: Cannot enter the BIOS menu, system will ask the admin password

  I just bought a HP G62.

  I add 4 GB DDR in order to get 8 GB total.

  When I try to enter the BIOS meny, prompted me the admin password.

  The seller told me he never entered a BIOS password.

  Could you please help?

  It was a keyboard problem.

  I found the solution here:

  http://dogber1.blogspot.fr/2009/05/table-of-reverse-engineered-BIOS.html

  The tool mentioned that the passphrase using a qwerty keyboard.