Satellite L755 - CD/DVD burner stopped burning

Similar Questions

• S good for Satellite 1400-253 DVD burner need

  Could someone give me the part number for the Toshiba dvd writer/burner
  or offer any compatible dvd burner to fit one

  Computer portable satellite 1400-253 s (ide connection)

  Thank you

  Satellite 1400 is old model of laptop and it comes with several different optical disk drives, but none of them was DVD burner. Currently, these discs were not available.
  Due to this fact, you will not be able to find info on compatibility.

  If you need the list of compatible readers let us know but none of them is DVD burner.

• Satellite M50 CD/DVD burning problems

  I recently puirchased a Satellite M50 with the CD/DVD Multi-lecteur. Toshiba literature indicates that it can write both write - once and several CD and DVD - writing.

  While I can burn on CD - RW and DVD - RW (DVD + RW) I can't burn discs CD - R or DVD-R (or DVD + R). The error message is something in the sense of ' does not support the driver (or reader) write once discs.

  Does anyone have any suggestions?

  Thank you

  Hello

  Well, it's not easy to say why you can t burn on some media. Maybe it s a malfunction of the media?
  Have you tried to burn CDs or DVDs from different manufacturers?
  I use TDK media and I m very happy. I found an interesting article on the CD/DVD burning.
  Check this: http://www.pcworld.idg.com.au/index.php/id;1400178792;fp;4;fpid;192

  Good bye

• I can build in the Satellite Pro 4600 DVD burner?

  Hiya

  Can anyone help with this? Has anyone equipped with a DVD burner (dvd - rw drive Toshiba sd-r6252)?
  Which models are compatible? I'm good fight opening and Exchange.
  Compatibility just in fact know.
  Thank you

  Hello

  I put t found any information if this drive is compatible with the Satellite Pro 4600, but you should be careful to replace the drive.
  You should check the dimensions of the car. Very important is the drive (master, slave, csel) settings because it is not possible to change this settings as on the usual desktop drive.
  I'm not sure about the settings on the Satellite Pro 4600 but the ASP Toshiba should know that.
  You can also order the caught player supported by the Toshiba service partner in your country.

• For Satellite Pro 2100 DVD burner?

  I have a Satellite Pro 2100 which has a CD-RW/DVD-ROM drive and I would like to upgrade to a DVD burner but don't want an external. Could someone tell me which drive is compatible with the model number and where I can get hold of one? Can I get a Toshiba direct? Nowhere would really suit me I need to get one, but just don't know what I can and can not use! Thank you.

  Hi Jamie

  Unfortunately, he was unable for me to find this DVD burner, but if you want to update or change some parts of your laptop the best way is to ask ASP for compatible devices and supported.

  Good bye

• Satellite P200-1ay - DVD burning is not working properly

  Hey

  last month my dvd burner works very badly.

  I tried different types of media (Platinum/sony dvd + r), but every time it has happened in the last part of the dvd.

  Sometimes, he finished a dvd but in a standalone player, it will shock.

  New firmware may work, but I'm not now, I have a Ts-Lo802a with firmware t035.

  Hello

  You should take a DVD R TDK.
  I mad a goo experience with this kind of DVD disc.

  I had a similar problem. My burned DVD didn t work in one of my DVD players.
  A player can read but the other n t.

  I tested the TDK DVD-R and it worked on both players

• Satellite L300-1BW - DVD burner is not found

  I have just updated to Windows 7, but now I can't find the DVD burner - from what I understand I need the driver, but don't know which.

  Help much appriciated x

  I had the same problem after upgrade to win 7, remove the upper/lower case filters problem solved in my case:

  http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

  or

  http://support.Microsoft.com/

  should work...

• Satellite P35-S609: DVD burner Mat * one disappeared UJ-820 s

  I bought a P35-S609 end 2004. The DVD burner was dead on arrival. I brought back to the seller, and they exchanged the laptop.

  The dvd burner worked for the first two years and then he started to disappear and reappear, leaving events in the journal system such as pasted below. A few months ago, he has disappeared and I have not seen since. Help!

  THX,
  JD

  In the system event log:

  Event type: error
  Event source: PlugPlayManager
  Event category: no
  Event ID: 12
  Date: 26/02/2007
  Time: 05:04:26
  User: n/a
  Computer: BACK2OZ
  Description:
  The device "MAT * a DVD-RAM UJ-820 s '."

  (IDE\CdRomMAT***A_DVD-RAM_UJ-820S___1.50___\5&1cd2b8a9&0&0.0.0) disappeared from the system without first be prepared for removal.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Hello

  Everything looks like a hardware malfunction.
  But what exactly do you mean by disappear? The drive is not listed in the my computer zone, or he can simply read and write media?

  However, after 2 years of work it s not unusual that the player will start malfunctioning I guess that the lens of the drive can read and write the CD or the DVD.
  So I agree with Marina4000 and it s time for a new

• Satellite L755 - CD/DVD drive does not

  I own Satellite L755 and the dvd rom does not work (do not read disks and show on the disks in the computer).

  When I go into the Device Manager in windows it displays error code: 39 which means that the driver is defective.

  It is not the first time its happening.
  It happens after a few months and I need to back up and do the system recovery each time.

  Is there a way to fix this without making the system recovery each time?

  Hello

  Try this workaround:

  Go to Device Manager and remove the CD/DVD drive entry (mark and press DELETE)

  Then start the registry and remove the filters above and below the following key:

  HKEY_LOCAL_MACHINE \SYSTEM \CurrentControlSet \Control \Class------{4D36E965-E325-11CE-BFC1-08002BE10318}

  It may be useful

• Satellite A200 PSAF6A - DVD burning issue, pixel dead, overheating

  Hello

  I bought a Toshiba A200 (model PSAF6A) of back in January, and it is riddled with problems since then:
  -Can't burn DVD (not @ around 50%, any software is used)
  -Several dead on the screen pixels
  -Overheating when playing games (I bought an external cooling block)
  -Now, all fans are dead inside the laptop! Overheating in the first 10 minutes of starting the laptop computer!

  Now, for me, it seems that the motherboard may have started to die.

  What I'd like to know is if it will be replaced with so many problems if I take service? (I reserved a pick-up for today)
  Or they'll just to try to solve every problem?

  -Can't burn DVD (not @ around 50%, any software is used)
  ... could be a defective DVD player. or could be bad upperfilters/lowerfilters. http://support.Microsoft.com/default.aspx?ID=314060

  -Several dead on the screen pixels
  ... LCD display needs to be replaced if it meets Toshiba pixel policy.

  -Overheating when playing games (I bought an external cooling block)
  ... Too much dust in the heat sink, must be blown to the compressed air, or dismantled so its really clogged. Dust accumulation is common in carpeted rooms.

  -Now, all fans are dead inside the laptop! Overheating in the first 10 minutes of starting the laptop computer!
  ... If the fans don't turn up at all, there must be a lot of dust in there. The fans need to be replaced.

• Satellite M55 - S139 DVD burn problem

  I tried 9 times to burn a DVD.
  I tried several software programs including InterVideo WinDVD came with the laptop, DVDFab Decrypter and those that I use most of the time, DVDShrink and ImgBurn.

  The log of the software indicates success, but most of the DVD will not play back - even on my laptop. Most of them won't open even - it just keeps telling me to insert a disk in the drive.

  Only once, I successfully burned a part of a DVD with InterVideo, and I could play on my external DVD player. But I was not able to duplicate my success (and only partially burned - perhaps InterVideo's just a demo). I tried to save as an ISO image and also just the files.

  I'm using Memorex DVD-R. Can someone help me please! I tried the DVD forums and nobody knows the answer. Is this a hardware problem?

  Here is the log of my last attempt:
  I 18:36:38 ImgBurn Version 1.2.0.0 started!
  I 18:36:38 Microsoft Windows XP Home Edition (5.1, Build 2600: Service Pack 2)
  I 18:36:38 initializing SPTI...
  I 18:36:38 looking for SCSI / ATAPI devices...
  I 18:36:57 found 1 DVD ± RW/RAM!
  I 18:37:33 operation started!
  I 18:37:33 Source file: C:\DVD. ISO
  I 18:37:33 file Source sectors: 1 760 786 (MODE1/2048)
  I 18:37:33 Source file size: 3,606,089,728 bytes
  I 18:37:33 Source file application identifier: DVD Shrink
  I 18:37:33 device destination: [1:0:0] MAST * a DVD-RAM UJ - 841 S 1.50 (D (ATA)
  I 18:37:33 Destination Media Type: DVD-R (disc ID: RITEKF1) (speeds: 1 x, 2 x)
  I 18:37:33 Destination media sectors: 2 297 888
  I 18:37:33 write Mode: DVD
  I 18:37:33 write Type: DAO
  I 18:37:33 write speed: MAX
  I have a link 18:37:33 size: Auto
  I 18:37:33 Test Mode: Yes
  I 18:37:33 BURN-Proof: enabled
  I 18:37:36 filling buffer...
  I 18:37:37 writing LeadIn...
  I 18:37:40 writing Image...
  I 18:59:19 Cache synchronization...
  I 18:59:25 cycling tray after Test write...
  I 18:59:29 operation successfully completed! -Duration: 00:21:55
  I 18:59:29 average write speed: 2 713 KB/s (2.0 x)-Maximum write rate: 2 800 KB/s (2.0 x)

  Hello

  This Protocol of engraving says nothing.
  These problems usually occur because of the CD/DVD media.
  I put t know if you tried, but you should check out the various media CD and DVD from different manufacturers.
  Well, try to use Nero burning Rom program.
  It s a great program and I m very happy

• Satellite Pro L875: Cannot burn DVD Recovery Media Creator and win 8

  I have a L875 Pro of the Satellite with Blu - ray burner.

  I tried to create the recovery DVD disc, the burn process stopped and error guest asked me to check if the disc is damaged or scratched. After the burning process, the DVD was not empty and some data wrote on this subject.

  I tried to burn the data disc in windows 8. the burner is not started. I'm only able to add files to the disc.

  I play Blu - ray movies and dvd movies, blu ray player was fine.

  I found information on the appropriate corresponding to the burning speed dvd disc speed.

  How do I know what speed the burner support?

  How to burn a DVD or Blu - Ray in windows 8? (I looked on the Microsoft forum, but the solution did not work.)

  It would be great if someone respond and make the drive burn discs.

  As a first step, it will be interesting to see why you cannot create recovery discs.
  Have you used vacuum on DVD-R media? Otherwise please use it and buy a product of high quality like Verbatim or TDK.

  Is there an option to create the USB stick recovery?

  Combustion under Win8? Have you tried to use some burning as NERO applications?

• Satellite 5100-201 a LG GSA 5120D external (Firewire) - DVD burner

  Material:
  Satellite 5100-201
  LG GSA5120D-connected via Firewire external DVD burner

  Software
  Windows XP SP2

  Problem:
  Windows is instability, often blue screen:
  IRQ_NOT_LESS_OR_Equal or other

  by stop Windows always shut down (Halt)

  Help me.

  Hi Victor,

  on the utility Cd & Toshiba tools is a program called «Register of IRQ routing V1.0»

  Maybe a reinstall might fix the problem!

  To bye chris

• Satellite A20-130: SD-R2412 cannot read that DVD burned in some optical drives

  Hello

  I have a laptop Satellite A20-130, running Windows XP and Ununtu Dapper in a double score. My 2nd laptop is not a Toshiba. When I burned the DVD (DVD + R) with my laptop Toshiba no and played against them in my Satellite everything has worked well.

  However, when I bought a new optical drive for my 2nd my Toshiba laptop suddenly stopped playing DVDs burned in this new optical disc (I was using exactly the same brand of disc and the same format - DVD + R). I tried the old DVD (those burned in the laptop before that material from the optical drive has been upgraded) and they can still read perfectly well.

  This problem applies to both Ubuntu and Windows XP. Computer support portable 2nd said that sounds like a problem of firmware with my Toshiba. I updated the driver for my optical drive Toshiba R2412 SD (which according to the manual of the leader, seems to fix a DVD-Ram compatibility issue). Now the reader occasionally reads some of the new DVDs burnt (after doing lots of noise and waiting for ages), but more often that not, I get an error message saying that the device cannot be read, because the format is wrong or the device needs to be formatted.

  This computer non-Toshiba laptop read DVD, it burns using the optical drive improved perfectly.

  Hello

  Satellite A20 is old enough laptop model, and after intensive use, it may be that the disc is more sensitive. If all this happens occasionally there no explanation just why this happens.

  I know it's pretty boring, but I don't see any magic solution. In the end, you should test with new disc.

• By Satellite Pro S300 uses double layer DVD burner

  Hello

  Sorry for my bad question, but I have a DVD burner double layer on my Satellite Pro S300?
  THX

  Hello

  Do you have your read the user manual?
  In manual mode, you will find information on the CD/DVD drives properties;

  Always is that the Satellite Pro S300 series was equipped with different CD/DVD drives
  TEAC DV-W28S and Panasonic UJ870 are readers of DVD super multi and support media Double layer + r.

  You can also find more information on the CD/DVD drives that are installed by using the Nero Burning Rom. There is an option that shows you all types of CD and DVD that is compatible with the internal SIDE