Satellite L755 - sound stops on the speakers (helmets of work)

Similar Questions

• Satellite A50 no sound on the speakers but headphones work fine

  Hello

  Satellite A50, Win Xp, its installed driver, the speakers are not silent, but when I use the headphones the sound is ok.
  Speakers do not work!
  There are two of them, I opened the laptop there are two sheets separated
  Are the speakers are down?

  But how it comes together at the same time are down?
  Is there any other configuration I need to do?

  Help, please
  Thank you

  Hello

  Maybe the speakers are not defective but the small switch located in the dysfunctions of helmet?  :|
  The little switch turns Mute speakers when headphones are connected.
  Try to move the headset jack a little bit maybe you will notice a few differences

  But just a question; you see yellow exclamation marks in Device Manager? Have you tried reinstalling the audio driver?
  If this isn't the case, then I recommend to reinstall!

• Sound comes only the hollow helmet on Satellite A200

  Hello
  recently, I used the headset on my laptop for the first time and after that the speakers no longer working, the sound is routed through the helmet all the time, even if the realtek software correctly tells whether or not the headphones are connected.

  In addition, noise in the headphones is very poor quality, there is an instant buzz and noise level can be saturated very easy.
  Y at - it a hope that there is a software problem, or do I have to contact Toshiba?

  Hi mate,

  the troubleshooting procedure is as follows:

  -set all the default BIOS settings
  -remove recently installed software that could cause such an error
  -Download the audio driver, remove the old driver and reinstall the audio driver with the downloaded version
  -shouldn´t This helps then recover your machine (backup of your important data first)

  The last resort would be to contact a local authorized toshiba service partner and ask them for help. :)

  If you need a link to find the one closest to the check the following link:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Welcome them

• Sound appear through the speakers connection adapter to Satellite P300

  I have a Satellite P300 and every time that I conect the connector AC/DC for power I hear a sound in the headphones or the speakers.

  This sounds like a terrible sound and I use the p300 to work with sound and I need help to lose this sound.

  Can anyone help me?

  Hello

  It's very strange. Are you sure that the sound comes from the speakers and not AC/DC adapter?

  For me, it sounds like a hardware problem, but before moving on to an authorized service provider be sure that the latest version of the BIOS is installed. You can download it on the Toshiba site.

  If it doesn't work you should contact an ASP. The technician can check this.

• SATELLINE Pro A200: When headphones are plugged in sound comes through the speakers + headphones

  I have problems when I plug my headphones in the headphone, sound comes through the headphones and speakers.

  He has not always done that, only for a few months and I have tried know how to solve this problem for a long time.

  Any help would be greatly appreciated,

  Thank you.

  Your helmet is possibly defective.
  Usually, the small switch located in the headphone must turn off speaker s if the headphone is plugged.
  If this switch doesn't work properly, so could the sound comes through the speakers too

  I think that it is a case of ASP and the laptop technicians need to check this

  Good luck

• Satellite A60 - sound stopped working

  Satellite A60 - sound stopped working. Download driver toshiba web site - click on the sound icon's new sound update and it worked, but disappeared whenever I restarted.

  Clicked the icon of installshield and starts to install, but then an error message saying 0 x 80040303, unknown error, the Setup program ends - this happens every time.

  Tried to download any other updates, but he says that I register my cell phone, I'm sure I did and doesn't let me do once again because it is more than 6 months.

  Help!

  Hello

  Try to restore the operating system to an earlier time when everything works well. On this path, it is not easy to say why this is happening. Try also to remove sound card since the Device Manager, and then restart the device.

  All the drivers for your device, you can find on Toshiba download page under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• Always sound coming from the speakers when headphones are connected

  When I plug my headphones, the continuous sound coming out the speakers with no sound at all through the headset. When I go on manage audio devices, the helmet will appear, but it says that they're disconnected even if they are connected. I know the headset works very well because they work with my phone. I have Windows 8. What can I do?

  Hello. This is usually a driver problem, especially on models having Realtek audio.

  If you need more help please give the complete model name of the laptop.

• Satellite Pro L500 - stops when the power cord removed

  Toshiba Satellite Pro L500 stops when the power cord is removed even with the battery to 100%. I removed the battery and all the indications associated with battery answer correctly. For example turns off, Toshiba Health Monitor also indicates when the battery is removed. If installed Health monitor indicates that the battery is at 100%.

  Someone please help. I have not installed anything new.

  Hey,.

  For me, the matter is clear: the battery can't hold a charge so the laptop will be shut down because it has no power.

  I think you need to replace the battery with a new one and you can get a provider of service authorized in your country. Simply contact the guy and ask that they can tell you how much it would cost.

  You can find a list of all FSA here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• Windows 7 - audio system sometimes works and sometimes doesn't. Soundcard Question. Issue of the audio recording. Poor sound quality from the speakers.

  I connect on - the work of sound system very well.  Media player works fine.  The next time I log on - no sound system.  Everything is plugged, convenience store finds no problems, Media player goes through all the steps and looks that don't worry, still no sound.  I have download a fix for the VIA recommended by Dell Driver.  I did, and it still has the same problem.  I can close, reconnect, and then the sound will work.  Sometimes I have to close and log on twice in a row so he can launch.

  Can someone point me in the right direction to solve this problem?  I am working on a Dell Inspiron 546 AMD Athlon II x 2 215 2.70 GHz and 64-bit with 400 GB of RAM.  I installed Windows 7 but when I dug deeper into the service code for this machine which found at some point in time he had installed Vista.  This could be the same Vista to Windows 7 problem audio, everyone seems to have?  I bought this Staples announced new with Windows 7 as operating system.

  I did research on all forums and responses and am unable to check if I have a "sound card".  I'm not used with the terminology so even if I follow the Microsoft instructions to find the right place to check and see, I do not understand what I see when I'm there.  It is said: ATI high definition Audio Device and VIA High Definition Audio.  Is this to say that I have a sound card or I should get it a?  If I buy a sound card will it fix my audio problem?

  Even though I had my audio problem fixed, I was disappointed by the sound quality of the speakers on this new system up to date.  My speakers on my old computer (which lasted from Windows 98) were by far superior in sound quality.  I don't understand why they sound so crappy and barely louder, and when you show the to they have a rattle for them.  I tried plugging my old speakers on my new computer, but nothing happens.  My new speakers have a Plug and a USB port.  I don't know what is... why goal can not use my 'old'?

  Finally, I want to record my vinyl on discs and need a great sound system.  Any advice?

  I removed all the ATI Audio as suggested.  The result in the short term is that the audio quality is improved.  I no longer hear the "crackling" when the sound is turned on.  I'll answer more if the issue of audio (works) continues to be a problem because the fix.  If you don't hear from me, then please consider the problem solved and my thanks to you.

• Speakers; The speakers do not work. I tried to change the sound to make it stronger and now I can't hear anything.

  The speakers do not work. I tried to change the sound to make it stronger and now I can't hear anything. How can I fix it?

  Hello

  Did you of recent changes to the computer?

  Method 1:

  Check if your headphones are configured to be used as a Communication device by default instead of the default device, or if the two devices are configured by default. If so, that the fault of headphones, so that Windows will only use when they are connected.

  Check volume settings.

  (a) right click on the speaker icon in the taskbar, then select volume control options.

  (b) click a checkbox on "all devices evolving sound.

  (c) make sure that you have "Default uncontrolled communication device".

  (d) place a check on the speakers and headphones.

  Method 2:

  I suggest you to return the item and check.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Method 3:

  I also suggest you to see the links and check.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• MacBook Pro sound stops once the connection when plugged headphones

  On my MacBook Pro, when I connected my jack 3.5 mm (headphones or speakers) and I switched off, the sound stops once I have connection, once again. The speaker icon is gray and I have to remove and reinsert the connector to get her back. Can you help me, please? Thank you.

  Check your settings in the Audio Midi application located in the Utilities folder.

  http://support.Apple.com/kb/TS1574 Troubleshooting for any audio speakers on Macs

  
  

  Trick/Tip: Open GarageBand if installed then, open a program (optional).

  Quit out of the app from GarageBand.

  =====================

  Repair Mac mysteriously mute

  The background on the issue, is that there is a switch small sensor inside the plug headphones. When you insert a headphone jack, the sensor includes what is what and changes the setting of audio output for headphones. If you insert a jack for digital audio output, the unit switches to digital output. When you completely remove the plug, it should read the internal speakers.

  The spirits tell me that there is a very good chance that you recently had something hostage in this port, a set of headphones or a cable leading to powered speakers, for example. When you remove the plug, something in the port have prevented triggering sensor properly. That's why you see Digital Out instead of the internal speakers.

  The solution is to force the sensor to do its job. The safest way to do this is to simply run a plug in and out of the port, a few times. A large part of the time, this takes care of the problem by triggering sensor correctly. If this does not work, there may be dirt in the port. Before moving on to more invasive techniques, get a can of compressed air, plug the small tube which corresponds to the nozzle and the breath to air a few shots in the lane. With a little luck, should dislodge dirt and the port will operate as it should.

  If this does not work, find a swab to foam tip that fits (electronics stores generally carry), dip it in rubbing alcohol and insert gently into the helmet in an attempt to wipe any tenacious dirt. I recommend foam rather than cotton fleece because the variety of cotton could leave the son behind. (This same technique works well with the bad conduct of ports from headphone output on devices such as iOS devices).

  It is possible that dirt has nothing to do with it. On the contrary, it may be that the switch should just a subtle help. If a socket or a buffer does not work, I have heard people resetting successfully with a deft poke with a toothpick.

  http://www.Macworld.com/article/2031146/repairing-the-mysteriously-muted-Mac.htm l

  

• By Satellite L755-17r spec meet the requirements for farming simulator game?

  Could anone look at this and advise please?
  My son bought the game for him and it worked fine far at the beginning but suddenly refused to start properly and if it isn't the game screen is empty, even if the screen moves when the controls are in a hurry.

  I don't know about the spec on graphics card so looking for some advice
  My graphics card is the Intel HD 3000, the game conditions are

  256 MB of vram
  nVidia Geforce 6800 series
  ATI radeon x 850
  S3 chrome43o gt

  My laptop model is toshiba Satellite L755-17r 4 mb ram, 620 gig and 2.1 ghz.

  I thank in advance

  Hello

  It seems that you play an online game that runs in the Internet browser window. Right?

  First of all these games have not need of high performance computers.

  Therefore the specifications of the laptop should be ok.

  I recommend the first graphics card driver update. Visit the Toshiba driver European page download the compatible driver and install the graphics card driver.

  Also I recommend that you check the different Internet browsers like Firefox, Chrome, Opera or the latest IE 9

  Welcome them

• Satellite Pro A10 stops during the installation of Windows

  I have a satellite Pro A10, which stops during the installation of Windows. The installation gets to the part where I need to select the HARD drive to install, then the system off just. I can restart it immediately, and the sdame happens.

  If I enter the BIOS, everything is detected OK, and I've updated to the latest version (V1.4). Also when in the BIOS, the system will remain under tension for ever and a day! and no downtime. I have a couple of diagnostic CD, then run the tests is the same thing, but I ran the seagate diagnostic tool and the HDD OK passes, as does the main map, but cannot perform detailed testing that the system shuts down during the tests.

  I suspect an overheating issue but would like advice.

  Hmmm it s very strange. I thought that the HARD drive could malfunctions but it of very impossible if the HARD drive has passed the Seagate diagnostic test.

  However, it would be very interesting to know if the installation of the OS would end with another HARD drive.
  You know, it of always difficult to provide an exact solution without any diagnostic tests.

  For me, it really looks like a hardware malfunction. So perhaps it would be advisable to contact the authorized Toshiba maintainer for a control of the laptop.
  Guys could run tests and would situate the fault quickly.

• Satellite L755 - how to remove the Bios password

  I have a Toshiba Satellite L755, asking me a password MESSAGE.
  I didn't put a password and I can't access the BIOS to restore.

  How can I reset the computer to boot?
  Thanks in advance.

  BIOS password is stored in the special zone of the ROM in the BIOS and cannot be removed if you n t know the password.

  If you don t know this password, only the service partner chartered Toshiba in your country can help you remove.

• My helmet is bright red, and the speakers does not work, when I try to adjust the volume when there is no headset/speakers in, there is a sign of the cross as the symbol of the volume where the places are supposed to be, macbook pro retina display

  My helmet is for some time, as the eye of the terminator, glowing and speakers have not worked since. I need to plug headphones or external speakers. Whenever I try to adjust the volume when it shows just a cross symbol under the sign of the volume, where small squares usually are (see below)

  

  Is there a way to fix this? Some other similar forums tell me to try to manually move a switch in the audio jack, but I can't seem to find such a change and the thing that seems most like a light switch, does not move.

  Can someone please help?

  Thank you

  Your audio output is stuck in optical mode, this is the red light.

  The solution is to try to insert and remove the plug a dozen times or more in the hopes of convincing making fall out of optical mode and in electric mode.