Satellite M30x-211 - BSOD if I turn on WLAN

Similar Questions

• Re: Satellite L40 - 17U: How can I turn off WLan switch?

  Hello!

  How can I disable WiFi switcher, which at the front of the laptop in the power LED, battery, and hard drive?
  If it is possible :)

  Thank you.

  Boyfriend sorry but I do not understand why you want to do. I think that you are the first person to ask something like that. Can you please tell me why you want to do this?

  If you do not want to use the WLAN switch it off and be happy?

• BSOD 0xC4 appears on Satellite M30x

  Hello

  Since yesterday I have Blue Screen Of Death, a few minutes after the beginning of my Satellite M30x. The error code is 0xC4.

  Sometimes IRQ_NOT_LESS_OR_EQUAL. I used the CD to reset the default settings, but now the image is the same: blue screens, until Windows has finished starting.
  But if I use the F8 key to get the protected mode there is no problem. Please help me solve the problem!

  On a Switzerland Toshiba site I found information (in German) that produced M30x tend to restart:

  http://ch.computers.Toshiba-Europe.com/innovation/de/generic/PRODUCT_UPDATE_SAT_M30X_CH

  Thank you very much!

  Hello

  I think you should check if the BSOD issue could be resolved using new memory modules RAM.
  I remember my old laptop had a similar problem. The OS crashed and nothing has worked. The question was about the faulty RAM module.
  I first checked how the laptop would be using RAM that one alone. This helped to discover how faulty RAM module.
  Then I replaced the RAM and re-tested

  Since the notebook then run as it should.

• Re: Satellite M30X - battery won't charge unless the laptop is turned off!

  Hello

  I have a Satellite M30X who is about 4 years old and all of a sudden, she stopped electric network load when the laptop is turned on but strangely fees - although very slowly - when it is turned off.

  Any ideas please.

  Thanks for your help
  Amanda

  Hello

  If you want and if you can, then you could try to replace the battery to check if this problem is related to a dysfunction of the accumulator.
  I mean your battery is 4 years old and it wouldn't be nothing unusual if your battery does not work as it should.
  My battery is about 6 years old and 3 years may not be loaded correctly.

  But note that these are only suggestions and if you want to be 100% sure, you should ask a technician for a detailed notebook check.

  Concerning

• Satellite M30X-102: power question - unit suddenly turn off

  Hello!

  I have a portable Satellite M30X-102 and about a year ago and a half months he started to turn off suddenly. First of all, it looked like an overheating problem, but also disabled directly after that I pressed the power button and sometimes it worked 10 hours without any problem, also, when it is off, power LED was flashing until I have Nations United - and replugend the power cable. If the battery was, he was immediately released.

  I sent it to repairs. They only cleaned the cooler and changed the dough to thermal conductivity and for a few days, the laptop worked normally, but about half hours ago, it happened again. I am convinced now that this is a power supply problem, possibly the power cable.

  You have any suggestions of what I could do, or should I send it back with a note that it is a power supply problem?

  Thank you

  [Edited by: admin March 23 06 06:56]

  Hello

  In my opinion, you should contact the service because it can start diagnostic tests.
  For me, this looks like an electronic malfunction of power supply.
  If the laptop has been repaired it there a few days/weeks, so I guess that the guarantee is valid.

• Satellite M30X: Trojan horse - total Formate with recovery disc?

  Hello

  I had a Trojan horse on my Satellite M30X. My Antivirus deleted, but every time I've been connected to the Internet, it appeared again. Not connected to the Internet it doesn't give me any problems. As I couldn't get rid of him, I backed up all my data and do a fresh install from the recovery disc. As long as the button for LAN wireless is disabled, everything works fine, but just a little while, after I turned on it, I get a blue screen. When I restart my computer with WIFI turned on, it produces a blue screen before Windows is properly loaded, even during installation. I tried restoring 3 times, but it's always the same result.

  1 is it possible, that the Trojan horse destroyed things of the pre installation?
  2. I can't choose to make a formatting during the recovery process. All data are lost, but I feel that's not formate the hard drive correctly, when everything is destroyed. It crushes just stuff?
  3. is there a way to make a good formatting, then install completely new Windows?

  It is not a problem of my WLAN card, internet being no problem under Linux.

  Thank you for your help

  Todier

  Hello!

  If you use the whole HARD disk Toshiba Recovery disk will be formatted so if you have any virus or Trojans on your laptop, they will be also deleted.

  But what BSOD code are you have? Are you sure that's the reason why the virus?
  You have the same problem if you connect a network cable to the laptop?

  Good bye

• Satellite M30X: Screen doesn't work after sleep mode

  I own Satellite M30X (model) after I left the laptop on while awhile, the computer went on standby to fashion. When I turned it on, the screen does not work, everything else is ok. I use the external monitor to the laptop. Everything seems to be in the order outside the screen. I did a system recovery and still the same problem. I don't know if it's a hardware or software problem.

  I know the screen works, because you can see roughly. It seems to me that the screen is always on standby.

  Is there anything I can do to fix this problem?

  Hello

  @marc.andres: If you n t no contrast on the screen have so try to use the FN + F7 key

• Satellite M30X stops shortly after starting

  Hello

  I got my Satellite m30x on repairstation because the charger was broken.
  Today I get back.

  But when I boot Windows XP home, after a short time, 10s, it turns off. Non-stop, just next door.
  I used to make State delivered, but same problem recovery cd.
  This Helene I run it in safe mode and it works very well, but is not normal.

  Seems to be a hardware problem. I don't think it's a driver problem, because it happened even with recovered resh system. So I think that some hardware is broken.

  Someone know this problem, or could tell me, what to do? I try to start with throw newspaper and view the log file, maybe this will help you.
  If nothing helps, I will bring this back to maintenancer Monday :(

  thx anyway

  Hello

  If the laptop works fine in safe mode and not in normal mode, so it could be a software malfunction.
  In safe mode, the operating system uses the standard drivers and don t charge all services.
  But as you suggested the laptop has been repaired. I think that your warranty is valid and the best way is to contact the technicians again.

• Satellite A300-211 - light button has stopped working

  Hello

  How people you?
  I have an annoying problem with my Toshiba Satellite A300-211.
  I had windows vista Home premium 32-bit installed on it but then I removed and started using windows 7 ultimate 64-bit and a result of one touch media buttons used to switch the led light on and off changed its function and began to put the sound on and off.

  When I installed the value-added package because the function key wasn't the button no longer works. It does not enable or disable the led light or the sound or no more.
  It is blinking but does not.

  Can someone help?

  Hello

  Have you tried to reinstall the VAP once more?
  Check it!

  Moreover, as far as I know you can configure media buttons by using the software.
  Please check the software in all programs-> Toshiba

  By the way; lighting can be turned on and off in the BIOS settings too!

• Satellite M30x - bootsequence Windows XP with blue screen

  I have the following problem: I have 2 different Satellite M Series notebooks of performance!

  The problem, that I wonder happens 100% of the tests, but after turning on the computer laptop and after the bootsequence - at the present time, that the windows XP logo appears - the system halts with a blue screen. Turn to restart and falls into the next blue screen.

  The only thing I discovered is that XP regularly also begins long switch WLAN hardware is turned OFF as soon as I turn this switch with Windows, the blue screen occurs immediately and the system runs out of oil.

  is that what is anyone able to help? -new review of pilots or any other solution to the problem would be appreciated!

  Hansjoerg

  Hey,.

  Congratulations, you have already found the problem! :)

  From my own experience, I can tell you that the same thing happened to a friend of mine. So he replaced the WLAN card with a new one and the problem has been resolved! Windows starts with WLAN turn on () correctly!

  What WLAN card is installed on your laptop?
  In Satellite M30x of my friend a WLAN Wireless Intel 2200 card has been installed. He bought a new one for little money on eBay and replaced it yourself because it s not very delicate.

  So take a look on eBay or other places. You can also ask a maintainer approved assistance if you are not familiar with the disassembly of the laptop.

• Satellite M30X-127 does not illuminate

  Hello

  Need help!
  My satellite M30X 127 does not illuminate. When I push the power button, it is DIRECTED in turn. But nothing comes on the screen. There is no sound and the fan does not start. I took it to a repair center and they told me the motherboard is fried and it will cost me 400 pounds to fix.
  The guy there offered my 100 pounds for to buy me.
  Please a little help. What should I do?

  Hello

  Otherwise you will search in ebay for the second hand with the good motherboard unit.
  Sometimes people sell books with the failure to display or other parts of damage, but the motherboard is ok.
  You can try to use second hand motherboard in your laptop.

• Power supply with Satellite M30x problem

  When I connect my Satellite M30X in power, he sometimes shows the power light and the battery light. It can then be turned on and will start and run.
  Most of the time the power light blinks and the battery light stay out: it will not illuminate.

  When it turns on, it will work for a period of a minute or two till about 4 hours and stops randomly.
  Now the led starts flashing and continues to Flash while it is powered.

  There must be some problem with electronic control gear. Strange is that this problem occurs from time to time.
  Sorry, but if you want to get rid of it you must contact Toshiba service and let check your laptop.

  To be honest, it can happen that
  Entire motherboard must be exchanged, and it can be quite expensive. Might be time for the new laptop computer. Satellite M30 is really old.

  What do you think of all this?

• Questions about the settings of the BIOS of Satellite M30X

  Hello everyone!

  I spent several hours today trying to find a way to make my Satellite M30X start automatically every morning so that I can use it as an alarm clock.
  Generally the best way to do this is using the "wake on LAN" or a similar service that offers almost every PC and which can be activated in the BIOS menu.
  However, it seems that there is no wake-up option in the menu of the BIOS of the M30X at all, I would say that users have almost no influence on the majority of the important parameters.
  So if anyone knows how to turn any mode wake up my laptop, let me know!

  Furthermore, I just updated the BIOS to 1.90 but nothing has changed on the menu itself.

  HawkeyePierce

  Hello

  I searched a bit, but there is no possibility to do so.
  If there is no WOL option in the BIOS, you will not be able to put it in the BIOS.

  But wait; Some LAN cards contains an option in LAN card properties.
  You can access it by the Device Manager-> ECS-> Lan card (right click)-> properties

  Here, you can see the unique tabs

• Satellite M30X starting problems

  Hello!

  My Satellite M30X doesn't start normally more. When I press the power button, it turns on, the fan starts, but nothing happens. Or sometimes it takes almost 5 minutes before then the Toshiba logo appears, it begins in place.

  After that, I sometimes get a message that the Smart HD feature has detected a failure in my HD. But not all the time.

  I have Linux and Win XP on my hard drive. When I use Win XP, it starts normally, then after a few minutes, I get the BOD with message IRQL_NOT_LESS_OR_EQUAL. Or sometimes, the system just hangs. If I boot mode safe, everyting works fine.

  On Linux, the system freezes after 30 minutes of use.

  I'm tempted to think that I just need to reformat my HD (I have a 100gig HD of Fujitsu), and everything will be fine. I have to try again. And also once again, on Win XP Safe Mode, everything works very well - I can't even use WLAN, and I am writing this same post! But if it's just a software or an OS problem, why not not my laptop start normally? I mean, why is that sometimes it does not start at all (the Toshiba logo does not appear), and I have to turn off my phone and turn it back on so that it works. Sometimes it is not boot at all, no matter how many times I try it turn on and off. The power on light comes on, fan will start, then fan turns off, light is always turned on and nothing happens. Or it could be caused by a faulty hard drive? Is that why it sometimes does not start at all? But if it is the HD, why is there not a problem in Mode safe?

  It is so weird coz it wasn't a problem before, and he appeared out of the blue.

  Any help will be appreciated! Thank you in advance!

  Hello

  To me, this looks like a hardware problem. I think it works in safe mode because other such graphics card device drivers are not loaded.
  As I know the IRQL error also occurs if the blue screen of death appears on the screen. I think that it us something wrong with the graphics card or the memory modules.
  I think you should ask the AEP from Toshiba for help.

• Satellite M30X does not start

  My Satellite M30X laptop will not start.
  Power is turned on, the battery is charging, but the screen will not activate.

  Hello

  The description of your problem is not very helpful to give some useful advice, but first of all, you should try this;

  -Remove the battery and unplug the AC adapter
  -wait 30 min and then insert the battery and reconnect the AC adapter.
  -try to turn on the machine

  This short procedure helped me in the past, maybe you are a lucky man and he will help you also.

  And of course, some feedback would be appreciated.

  Concerning