Satellite P200-RT9 - info necessary motherboard

Similar Questions

• Advice on which necessary to a Satellite P200-1JV driver

  Hello

  I have a Satellite P200-1jv (PSPB6E) and miss a driver after a format for a mass storage controller.

  If someone can advise which driver should I install?

  THX vinnygreg

  XP or Vista?

  Did you install a copy of Windows Street?

• Upgrade GPU on Satellite P200-13N

  Hello everyone

  I just got a caled "new" machine Toshiba Satellite P200 13-N with the following specifications:

  Windows Vista Edition home premium
  2 GB Ram 667 MHZ
  Processor Intel core 2 duo 1.73 ghz
  NVIDIA Geforce 7600 go with 578 MB of ram

  Now I just read the info that he comes out of the new nvidia Geforce 8700 GT graphics card. Can I put my card graphic to the GPU or not because it's a PciE card

  Thanks for any advice :)

  No, certainly not possible. The graphics chip is more often soldered to the motherboard and it of not possible to delete or replace it!
  Especially the whole motherboard must be replaced!

  You should know that the CPU or GPU upgrades or replacements are virtually impossible on laptops!
  Therefore, I use my desktop PC for games because it is very easy to upgrade the hardware. And I only use my laptop for my work!

• Satellite P200 Vista Ultimate - boot configuration data read error

  I have a Toshiba Satellite P200 running Vista Ultimate.

  Recently I started having a problem after restarting after the installation of vista updates. In fact, it will not start at all and gives me the following message on a black screen.

  Windows could not start. A recent change in hardware or software can cause of bethe. To solve the problem:

  1. Insert your windows installation disc, and then restart your computer
  2. choose your language settings, and then click Next.
  3. click on "repair your computer".

  If you do not have this disc contact your manufacturer aministrator or the computer of the help system.

  File: \Boot\BCD

  Status: 0xc00014c

  Info: An error occurred trying to read the boot configuration data.

  The only way I can fix it to insert the recovery dvd and click on repair. This levonorgestrol only when the computer restarts after an update. If I manually turn off the computer, then on start up fine.

  I don't want to put automatic offf to update more because I think they are important from the safety point of view, however, this situation is not acceptable.

  Can someone please help.
  I have a screenshot of the error, but have reproduced the information above.

  Hello

  In my opinion, there is something wrong with your mater boot (MBR) of the drive and therefore the bootloader causes an error.

  Usually, you might be able to fix it using the original disk of Vista but it s really strange that this problem still occurs after the update to vista.

  In my eyes, you should really check if the same problem would happen using the Toshiba factory settings and configuration.

  Good luck

• Is a 3rd party compatible with Satellite P200-1EE cooling module

  Hi all

  The fan started making noise, a week after the warranty has ended, which means the replacement is necessary.

  Almost impossible to find the fan in the United Kingdom, however noticed that the fan Sunon GB0507PGV1-A my P200 is identical to that in the Acer Aspire 9300, with an identical configuration of heat sink. The differences are the slopes of Acer of 1.6 and P200 at 1.2W. I found the fan Sunon - available at the United Kingdom Acer but wanted to ask experts if it would work.

  So, what do you think?

  Thank you guys

  Hello

  The fan is not compatible with the Satellite P200.

  You must use a Toshiba fan. An ASP (authorized service provider) can help you to get a new.
  Here you will find an ASP:

  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an ASP.

  Good luck

  Good bye

• Satellite P200 - need CPU fan replacement

  I have a Satellite P200-16V and my problem is on the cpu fan.

  I tried to open it, but after the keyboard, hard drive, Rams, OVOCHECK and 40-50 screws and some cables, I realized I have to get out the motherboard and screen mabe and I close it again after 3-4 hours. The cpu fan has been breaking and I don't know what to do.

  I am from Greece. If I go to the toshiba in Greece, I can find a cpu fan or any system cpu radiator? Can you help me?

  Hey Buddy,

  Looks like the fan needs to be replaced and therefore, you should contact the closest service provider authorized in your country. Guys can order a replacement part and swap it out.

  On the Toshiba site, you can find a list of them:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Sorry, but everything that s what I can say. Here it s only a user forum so I think no one knows the exact number of part or a manual how to take apart the laptop but the ASP can do for you. :)

• Looking for DVD recover my Satellite P200

  Hello

  I am looking for a DVD reinstall my Satellite P200 - 12 K (preferably in french)
  Thank you for your help.

  Philippe

  Hello Philip

  It might be problematic for you to find the original Vista recovery disc for this older model laptop.
  I'm also sure that you will not be able to order it too so my advice to you is to install the clean version of Win7 32-bit by using the original installation disc for Microsoft.

  I had long ago P200D and I used it with Win7. I found all the necessary drivers, tools and utilities on Toshiba download page - http://www.toshiba.eu/innovation/dow...ivers_bios.jsp

• Recovery for Satellite P200 DVDs

  Hello, I have a Satellite P200 12W computer and for some reason he couldn't start Windows correctly yesterday, I got a black screen. I decided to launch the recovery DVDs, he formatted the hard drive and then... could not copy all the files. It stops about 7 or 8% everytime I try, the DVD seems illegible.

  I tried to buy a new one from the store, but he told me that the computer is too old or that I chose the wrong place.

  Any idea to restart the computer?

  Thank you.

  Satellite P200 is old model of laptop, and I imagine that you can not control the original Vista recovery disk.
  As far as I know, and you can check, Satellite P200 is fully compatible to Win7 32-bit so I recommend you to install on your machine.

  Last year, I sold my former P200D I used with Win7 32 bit and I can say that I was very pleased with the performance.
  Get the Microsoft installation disc and install Win7. All the necessary drivers, tools and utilities that you can download from the Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

  If you have any questions or advice on installing Win7 you are welcome.

• Satellite P200 screen is eventually died - now very dark

  Hello

  My laptop screen (Satellite P200) is eventually died.
  He had been much flicker when opening the laptop but settle.

  The screen is very dark and you can see just the windows etc. I can't connect a second monitor and run from that.

  -Is the screen, backlight went?
  -I'm out of warranty, how long does it take for an extended warranty through? The site has offered me one for relief.

  Any information would be great.
  Thank you
  Simon.

  Hello

  First you will not get an extended warranty, if you haven't bought it.
  If you warranty is no longer valid, then you will have to pay for the repair.

  Now a few words about your question;
  I think that your FL inverter is dead. The problem described in job ads seems to be a fault of inverter FL. This small part controls the backlight of the screen and causes this problem.

  I recommend contacting the technician of laptop (certified partner) and I will ask the Fl inverter assessment and if necessary I would work out a replacement.

  Good bye

• Satellite P200 - 1 K 9 and performance issue

  I hope IM this ad in the right area...

  Hello

  I have a Satellite P200 - 1 K 9 with the following specifications:

  Intel Core 2 Duo T7700 @ 2.40 GHz CPU
  3 GB RAM
  32 bit
  Note Windows experience 4.8

  ATI Mobility Radeon HD 2600 map graphic and one
  HD sound card...

  My problem is that since I bought my laptop about 7-8 months ago slowed down the performance. Of course, since then I had filled my hard drive (partition) with the media and understand that this is at the expense of the performance of the system. However, since this grateful I released a lot of disk space. I have 40 GB free on my C: and 90 GB free on my D:. Total, shared capacity is 250 GB (125/125).

  Basically, while being largely ignorant of the technical questions, laptops and technology altogether, the way I noticed the inability of systems to "return" to its original factory running (which, I might add, I was very impressed by) is when it comes to games. Football Manager 2009, for example running very slowly. I had a peek in the Task Manager, because I play the game in a window, and the CPU usage works 100%, although I'm sure the culmination of the individual tasks and Applications is not equivalent to that (maybe there is a program hidden Hogging my CPU speed?). Call of Duty 4, which took place on medium-high graphics settings when the laptop was new, now struggles on the lower graph and the sound settings, without that there is a problem with internet connectivity. In addition, (for reference, I m not not the game breath) Battlefield 2, which is about 3-4 years of age very slowly also works. He ran too extremely fast, on the highest graphics settings when the laptop was brand new.

  Basically, what I want to do, is to return the system to its original performance. It is always too slow when two hard drives were full of games and media. Now, despite the withdrawal of many of them, the system works like a sloth.

  Means I ve done to solve performance problems are: disk defrag, disk clean up, error checking, virus scan (with Kaspersky), scanning of spyware (with PC tools Spyware Doctor), deleted the old files with CCleaner and erased files not deleted with a program called eraser... As well as the release of about 50% of the disk space.

  Add to that, I ve noticed performance was much more when I first turn on the laptop and the sides of it n t had the chance to become hot. I understand what is normal, and he did before when the laptop was new and was operating at optimum performance, but perhaps I have an overheating problem? I'll let you know what is the temperature, but I put just t know.

  I hesitate to return the system to its factory settings and if necessary I'll take to a computer store, if there is something they can do. But in the meantime I d like to listen to any advice on general issues that I face, and possible solutions to my problem.

  Thank you very much.

  The problem with Windows is that it becomes slower and slower that you operate.

  When the devices and programs are installed, they increase the size of the registry, activate the Services, add resident DLLS and drivers, slow down the file system by adding thousands of files. As well, the operating system can get damaged after some time due to the loss of power and software poorly written.
  Even if you use CCleaner and other utilities and uninstall several programs, it is never as fast as a fresh installation of windows. Uninstalling programs rarely remove the program completely 100%.

  The antivirus can have a huge effect on performance, that's why the system runs great when the image of the plant is installed (which has usually no anti-virus).

  So basically if you want the system making a lot once again, you must back up your data and perform the recovery. I myself do it once a year to restore performance.

• Graphic problem on Satellite P200-13Z

  Hello

  Satellite P200-13z running 32-bit vista - intel graphics software displays + does not work because of insufficient resources + other checks indicate that the chip has no allocated memory.
  Machine runs Ok'ish on the LCD screen in mode VGA base but of course, for many programs, it is no good.

  Version 1.7, nothing in there to allocate memory for the graphics chip - as in other systems with built-in BIOS system memory for graphics.

  System has 1 GB of ram - updated 2GB with no difference.

  When I bought the laptop H/d has been deleted for reasons of safety, replaced by the new HD & reinstalled vista from a recovery P200D disk then download specific files for this machine from the Download Center, am I missing a file important?

  How do I allocate memory of the chip or do I have a defective chip / / cpu / / mb or other?

  You can not install image of P200D on P200. Both models have completely different hardware platforms. Images of recovery are individual and model specific images.
  If you want to play a little bit and test if you get it working it's Ok, but you also expect that some problems will occur.
  All with images is not so simply as you think.
  Toshiba has designed images for the use of certain models only. It will be too easy to buy a laptop and use some images on different specifications.
  I mean you pay a license and install on 10 laptops. You understand what I mean?

  If you do not have original disk recovery facilities use bare BONES Setup with disk Microsoft facilities and subsequently install all necessary drivers, tools and utilities download page following the link you have posted here. You will see that everything will work well.

• Installation of Satellite P200-144 recovery disk problem

  Model Satellite P200-144 PSPBGE

  Hi all

  Today I received a 2nd recovery disk mail via UPS directly at Arvato distribution GmbH

  Yet once there not in the exact same place as the 1st disk that I received but returned and they replaced.

  My original recovery disk was lost around the House 3 months back, which I am now myself kicking on.
  Reason for restoring factory default settings was that I wanted my pc to be clean like a cell phone factory default as it was full of registry errors.

  In any case on the problem, after that 67% of image recovery happens with the corrupted file, here is the installation proc.

  Try to rename all the letters of potential left to HDD0
  Try to rename all the letters of potential left on HDD1

  Microsoft DiskPart version 6.0.6000

  Copyright (C) 1997-2007 Microsoft Corporation.

  On computer: MINWINPC

  Disk 0 is now the selected disk

  DiskPart succeeded in erasing the disc

  DiskPart succeeded in creating the specified partition

  Partition 1 is now the selected partition

  DiskPart successfully assigned the letter of the drive on the mountpoint.

  100 percent complete

  DiskPart successfully formatted ther volume

  DiskPart succeeded in creating the specified partition

  Partition 2 is now the selected partition

  DiskPart successfully assigned the drive letter or mount point

  100 percent complete

  DiskPart successfully formatted ther volume

  DiskPart marked the current partition as active.

  Define RECO-info-guid = 4D2AE583-8FD5-4D7D-AE07-B098C1CBA1B5
  RECO-info-imagecount value = 2
  define the RECO-info-partnumber = 1
  RECO-info-numsplit value = 5
  RECO-info-bootindex value = 0

  L ' ImageX for Windows tool

  Copyright (C) Microsoft Corp. 1981-2005 all rights reserved.

  Progress: 67% 06:44 minutes

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [ERROR: 1392] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  ResourceExtractToFileByStruct: (seq. 50)-> Uncompress or WimCopyFileEx failed

  [ERROR: 1392] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  Error image restoration.

  The file or directory is corrupted and unreadable.

  Error: ImageX could not apply E:\05021XSP.swm Index 2 Weird Vista in C:!

  Is there a reverse this problem?
  My thoughs is that the image is corrupt.

  The error that you declare, is a fault with the Vista disk image cannot be applied to the hard drive.

  Which you used 2 recovery discs of different product, which would indicate that there is not support for product recovery but a defective hard drive, possibly bad sectors on the hard disk.

  If the laptop is in it duration of warranty, then give Toshiba a call for the book on deposit for a repair of the equipment.

  0844 847 8944

• Re: Satellite P200 - installation of XP and SATA driver

  Hi guys

  I'm new to the forum.

  I know there are already 100 topics on installing XP on a Toshiba Satellite P200 and believe me I have lived all of them, but I'm still fighting trying to install XP.

  I will describe the steps I've been through so if someone could tell me where I'm wrong or try something other way out then let me know:

  I went to the following site to download Intel Matrix Storage Manager:
  http://Downloadcenter.Intel.com/Filter_Results.aspx?strTypes=all&ProductID=2101&OS FullName = Windows * + XP + Professional & lang = eng & strOSs = 44 & submit = Go %21

  First of all, I downloaded
  32-bit floppy Configuration utility
  (F6flpy3287)

  Now the first download did not contain an exe file, so I've been to unzip and copy the files on my floppy drive. I inserted my XP SP3 CD and rebooted the laptop, when XP installs the Setup files, I pressed F6 (that she mentions at the bottom of the screen) after installation of the files, that it says something like that couldn't detect the drivers and press S to select one of the pilots in total there are 4 riders, I chose all alone (so did 4 facilities in total) , but it keeps giving the same error.

  The error itself says something like the hard drive is not detected and to be honest its make me lose the will to live because I spent hours trying to figure this out.

  As there are two managers matrix downloads I tried the other as well:

  32-bit floppy Configuration Utility for Intel Matrix Storage Manager version 5.5.0.1035
  (F6flpy32)

  This one was an exe file, I have attached my USB floppy drive ran the exe file that has copied the files and I tried to choose once again each of the 4 drivers the entire installation, but it says the same thing no hard drive detected.

  Someone help me please, I would really appreciate it.

  Thank you

  To be honest, here are really quite subject to this subject and enough descriptions how to do this please, read it.

  I think the simplest is that you download the storage on the Toshiba site manager.
  Then, you can use nLite to integrate the driver on the CD.
  After that, you must also start the CD and then the HARD drive is detected (you don't need to press F6 to load the driver.

  And here's all the necessary links:
  http://EU.computers.Toshiba-Europe.com
  http://www.nliteos.com

• Graphics went on my Satellite P200-144

  Hi guys

  ran cod modern warfare 3 on xp64, and it crashed. Rebooted but graphics were gone, I get a vertical striped screen, looks like that iv, e fried the chip.
  Tried to reinstall drivers, also in safe mode. Tried to format and reinstall but no go.

  I can't the graphic chip (nvidia 7600 go) replaced?
  Also tried via TV, same striped screen.

  In this case, entire motherboard must be replaced. Satellite P200 is old laptop model and, in my opinion, you should check out eBay to see if you can buy it already used mainboard or the same model with faulty display or something similar, so you can use the motherboard.

• Satellite P200-1JR doesn't do nothing - all the lights are off

  My toshiba Satellite P200-1jr someday is dead and it is like new.
  All the lights are off with battery or without or with only of food.

  Please help me. I don't know what to do.

  Thank you!

  Hello

  Don t think someone could help here in your case.
  No lights (power led, led battery nor ac DC plug-in led) means there could be a problem of serious material maybe the motherboard is missing.

  If the AC adapter is defective, then the laptop must always turn on using battery power ok, this is not possible if the battery would be too empty.

  So usually a technician first test adapter and should try to plug an AC adapter right in order to test this.

  But to me it looks like something wrong with a motherboard :(
  Of course, this is only my personal opinion...