Satellite C665D - the second time the same problem HARD drive.

Similar Questions

• Can I install CS6 on the SSD and the same computer HARD drive without losing the license?

  I just upgraded my Macbook Pro, Mac OS X 10.6.8 with a new SSD.

  I'm not sure how smooth my original OS X HARD drive worked without error, then rather than using Set Up Assistant and the Migration Wizard, I made a new installation of Mac OS X on the SSD. Now I want to either individually to bring all the apps to the SDS or more favorably, to put a new installation on the SSD.

  If I try to install just the CS6 my uploaded install software, I suppose that he will ask the serial number. As far as I know I can install the CS6 on two separate personal computers. I want to save my second option for the iMac I want to buy later. So, how can I make this installation on the SSD drive?

  And, as soon as I did the installation, I will continue to work for the SSD, but who still want to keep the backup HARD drive version until I don't know that the new SSD works flawlessly for a few months.

  Same question goes for LR4.

  the disk hard you, cs6 programs open, and then click Help > deactivate.

  you are ok for two more facilities/activations.

• How to connect two external HARD drive satellite and the same printer?

  Hello

  I have now two laptop Toshiba Equium.
  What is the best way to connect them so that they can access the same external hard drive and the same printer?

  Thank you

  Hello

  I guess the two laptops are in the same network; Home LAN or WLan. Right?
  I this case I recommend you connect HARD drive and printer to one of the portable satellite.

  Then you can share the HARD drive and the printer with other cell phones on the LAN.

  You could add the network permission to others, and in this case the other participants of the network would be able to share the printer and HARD drive.

• The fan runs all the time because xinetd running more than 80% all the time.  Someone else has the same problem?

  xinetd is running at 83% or more 24 x 7 devours battery in 2 hours or less and making the fan run all the time.  I am connected to a bug report, and it turns out that it was a duplicate because someone else had the same problem.  However, I have no access to the other bug report or find anything either in the discussion forums or online.  Anyone experience this problem?

  Hello gorgonzola1111,

  I doubt that someone else has this problem because xinetd does not part of macOS. Have you installed it from a package of "ports" 3rd party?

• I have the same problem. whenever I start windows it tells me it is install and configure updates, after 20 minutes he finally - but next time I start exactly the same thing happens - that is every day and im tired of it.

  I have the same problem. whenever I boot windows vista it tells me it is install and configure updates, after 20 minutes he finally - but next time I start exactly the same thing happens - that is every day and im tired of it.

  Hi MartinWithWindowsIssues,

  Welcome to the Microsoft Vista answers Forum!

  I have some steps that may help you.

  Step 1

  Try resetting the component of windows update.

  To do this, click resolve this present in the link below. Click run in the file download dialog box and follow the steps described in the fix it Wizard.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Step 2

  Perform a scan of the file system [SFC] checker on the computer that will replace missing or corrupt files.

  To do this, follow the steps below:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11. once the scan is finished, close the command prompt window, restart the computer and check.

  For more information, see the link below:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  Hope the helps of information. Please post back and we do know.

  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Clock on windows 8 is wrong time, I tried to set the time of the internet but its still not working, think theres a bug in the clock time, anyone have the same problem for windows 8 and know how to fix?

  Clock on windows 8 is wrong time, I tried to set the time of the internet but its still not working, think theres a bug in the clock time, anyone have the same problem for windows 8 and know how to fix?

  It sets obtained :-) Sorry for the delay

  Thank you very much! has worked perfectly!

• S271HL - demand guarantee, she needed no repair - I'm back with the same problem

  Earlier, I sent a S271HL monitor for repair under warranty.  The issue was that the screen would not activate and the only thing that happened was an orange power flashing instead of a constant blue button button.  The problem is that I got, with the same problem that I sent him.

  I am the home monitor today.  The first two pages of order of service, under the description of the problem, I see:

  said c:CX dsnt unit turn on, only a power light flashes

  a: do you have a self test, no go, so informed the cs repair, cx agreed

  r: at the request of the unit for repair

  On the second page, I see this:

  Computer data. Accessories
  No accessories (No. Box)

  Software & other remarks:
  surface scratches, no power

  (Note to this poster: surface scratches?)  Where?  I treated this monitor as it was made of Crystal.)

  Diagnosis / repair:

  Reported problem not noted.  Monitor power towards the top with good screen, stable.  Monitor adopted system intensive burnin test over the weekend, more than 63 hours, without any problem.  At the end of the extensive, intensive, powered burnin test monitor then turn it several times; always under tension with a display of good and stable, no problems noted.  In the course of trials, powered monitor then turn it several times; always constantly lit with a good and stable display.

  ===============

  So, my friend has a supply for his Acer monitor (a smaller one) that has 19v and 2. 1 has, just like mine.  So I borrowed her power to test my monitor and I had the same problem: an orange power button flashing.

  So the question is: has anyone ever encountered this with Acer?  I'll call them, but I wanted to see if there was any opinions here at the same time.

  It seems that this has not worked for the first tester and launched up to more away for another tech fix, but when that tech he walks, it worked fine. I have been a mechanic my whole life, in many areas, and I saw this scenario several times. There is also the possibility that someone got lazy, but you can not prove it so just contact warranty service again and tell them that they must resume and attach it.

• TV LCD W2607C with the same problem of power W2600

  My Dell W2607C LCD TV has even no power problem. I had less than 3 years and have had very good care of it. I stop it after watching some tv to go with dinner. Two hours later I tried to turn it on and I have nothing. Not even a blink on the LCD. Power LED turned blue, then blinked orange.

  A week ago, I finally called Dell customer service. Of course, I've been waiting for about 20 minutes. After giving all pertinent information about my Dell 26 '' LCD/TV, the operator (in English very hilly, I might add) guided me through all the troubleshooting steps I had done. None worked troubleshooting.

  She tried pulling the line 'contact your cable operator' old, but I told her that the cable is fine cause it is also plugged into a second TV. She then tried to explain since it was out of warranty he could not replace. I did not stay in there and started to explain how Dell sold me a defective product and that I have LCD screens and televisions last more than 2 years and how it was unfair for a loyal customer to treat them that way. She then tried to send me to another service of technical support, but the only difference is they were going to charge me. I said 'No' and then asked his supervisor.

  He tried to give the same line on 'out of warranty' and I told him that this is not an uncommon problem and if you google "Dell 26 '' TV does not turn on", he would see that there are a large number of consumers out there with the same problem as me.

  He then said, "Oh but the problem you have raised is the 2600 series model not yours, yours is the 2607C.» I answered, without hesitation, "but it is still part of the same series, is - not? And it seems that the same problem was overlooked when they made the one I bought. »

  I was told someone to a "higher authority" would contact me, but their calls have been rather erratic and I can't return their calls only leave voicemails. I get emails telling me how they just tried to call and when they say they would call between some time next, I end up wasting time to wait for a call that never comes.

  As a last resort, I post here in the hope that I get response and are not facing customers by service script.

  I ordered from Dell recently, his good faith. If I'm stuck with a very expensive paperweight, I might as well made my recent purchases and cut all ties with Dell completely.

  
  

• noticed the same problem, my friend had 2 months in hardware of the iphone 6!

  Hello

  I use the iphone 6, which is out of the now (india) warranty period. I noticed a problem on the screen detaches from the main frame around one of the edges. It's the same problem happened to one of my friends who ultimately involving more areas progresed and encrypted him a good amount of money to repair! I searched online on the issue and learned that this has happened to many! I'm pretty sure that's not due to mishandling (which can easily be checked during the inspection) atleast in my case!

  I called apple in India care a couple of hours. Care agent told me that they can't do anything on this issue since his release from the warranty period (even if it's a manufacturing defect). I have a strong feeling that my question has not been properly processed there. Is not a manufacturer, selling a defective product ensuring there will be no problem in the first 6 months and declaring that they are not rsponsible for what past of the next day. It should not be considered on the side of manufacturers, it should rather be on the side of the average consumer, who spent a good amount of money to purchase!

  Kindly understand that I don't have time to run in the stores of stores and calls calls! I need a solution to the authorities of apple before moving on to the Court in India on behalf of fellow sufferers!

  Thank you

  Hello

  You don't talk to Apple here - it is a community of used-based technical support.

  If you are unhappy with the decision that is provided by Apple, you will need to discuss the issue with them.

• RE: Installed detachment "access denied." I have the same problem and none of the above worked. The property is empty, but demand will not accept me.

  RE: "access denied" following the installation of Firefox question. I have the same problem. Details below: I tried opening in Mode safe that has not worked. I have administrative access. When I click on the general tab in properties, I get a message that there is no such thing as "firefox.exe". This file, or any other type 'install' file appears in the directory Mozilla Firefox with the exception of 'uninstall '. I downloaded and tried to install seven times from six different sources, including Mozilla, all with the same results. I also tried a number of solutions on the web for this error without great success. I tried, first of all, to make an upgrade, then remove the old version of Firefox and have been 'install' since then. Avast, Malwarebytes and Threatfire found no malware.

  I've never had a similar problem with Firefox before and I used it for years. Anyone has any ideas that I have not already tried? I'm tired of using Internet Explorer! RE: Troubleshooting below - information Windown will not open the downloaded file.

  arwade said

  I downloaded Firefox on seven different sites

  Please download the full installer ONLY of Mozilla.org.
  Download Firefox full installation for all systems and languages {web link}

• My touch screen has a problem after downloading the IOS 9.0.2. Already try apple advises the steps. But the problem still occur. Already done restart of strength. Factory setting Reset also possible. But still the same problem. Can only be used at one min

  Hello!!!

  IM Apple Fan.

  Purchased IM Ipad2, Ipad4, Iphone6

  Last month I already buy s Iphone6 +.

  Today I feel unhappy

  MY IPHONE 6 'history '.

  My touch screen has a problem after downloading the IOS 9.0.2.

  Already called and try apple advises the steps. But the problem still occur.

  Already done restart of strength. Factory setting Reset also possible. But still the same problem.

  Only can be used for a minute. After that... The problem comes in again & again & again...

  APPLE.COM

  Can U help me

  Only products of Apple of love before updating the version 9.0.2

  iOS 9.0.2 happened some time. The last iOS is iOS 9.2. If you have not updated, updated. If you restored to the factory, it must have downloaded iOS 9.2. Also, if you restore to the factory and the problem is still there, then you must make an appointment at the Genius Bar to the nearest Apple store or Apple authorized service provider or call the Apple Support to have the device examined by Apple. There seems to be something wrong with the screen.

• E3000 with the same problems on & more here, but no expert solution for the 2 main problems

  

  1 - with regard to support USB connected hard drives that will not transfer data & like to come & go quite often of the view.

  Everything seems like a joke to me, when I read that a lot of people have hard drives USB who worked for a year, & when it stops working or acts upward, we all have a test to see if it connects & works very well on our other connections PC/Laptop & the only advice given, this firmware is upgraded or a list of hard drives that have been tested and work on the E3000.

  2nd - my other problem is that my E3000 now decides of its own to disconnect wireless & cable Communication and then reconnect alone, whenever you feel.

  What makes angry of this problem is that it is abundant in the Forums & I tried all the fixes, but I still have the same problem & sound as good as this device of 2 year, Max is grilled.  As is the case when there is a loose connection that overheated, in what thread or welded metal move when heat is added & move at the time where the heat is removed.

  PROBLEM:

  My touch 1 Maxtor (from the approved list) is connected and playing now you see me & now you don't game.  If I ever try to import or to export any image file or music, the Communication goes & then sometimes will return its own. Working with Game Consoles, when something begins to work intermittently, then it is a hardware problem or software with the device.  It is not a user error, when it worked fine before.

  SOLUTION?:  This is why we are all here. Thanks to a landmark of expert for the same problem that many of us have?

  How about this solution. Why not let all E3000 owners send there wireless routers is not working towards a credit for a new operating model nice. I think that we would all save a lot of headaches & get rid of 25% of all calls for help on this forum.

  Thank you for your attention,

  BigdogTim7

  PS. Please give us/me expert advice on how to solve the problem.  If nobody knows the answer, then Cisco/Linksys looks really bad for selling a router high of $$$, being touted for the games and files sharing multimedia home & it only at this stage.  If it should be recalled, will bring up by all means, or come up with a fully functional firmware.

  Thanks again & hope to hear news good & productive, cause I am so tired of playing with this E3000 & will more than likely stay away from your product for any & all future purchases, no matter where you are ranked (E3000 was 3rd & best prices of the top 3 when I bought it).

  Well, I'm here, not having heard an assumption about my problem, but to get an opinion of experts & solution to my problem, but also all other users of the same or very similar problems.

  I am now a HAPPY 'Belkin N600 DB' owner for only $79.99 @ Wal-Mart/Radio Shack. This new does much more than the Cisco E3000 wireless router & even changed my Modem 100 MB (green) flow out of 1000 GB (Amber Light).

  So, so HAPPY now!

  Bigdogtim7

• Cannot "turn on media streaming" - another user of Windows 7 with the same problem and the "suggested correction '' does not.

  This windows bug has been reported and 'responded' before by several people, but the "answers" do not work for me - and they do seem to work for a lot of people in this area and other forums.  I hope you can provide me with a real estate diagnosis, a reason for why this happens and a real solution that works for everyone.

  I'm trying to 'Turn on media streaming' in Windows Media Player so I can listen to my xbox and other home theater equipment.  The problem I have is the same problem as [of] other people have reported: in Windows Media Player, I press the turn on the 'link', the button greys streamin media shortly, but then nothing, and streaming is not enabled.

  I don't have a network problem.  I was able to extend Microsoft Media Center on my xbox.  (simply not enable streaming in WMP).  With media center extended is a large (better) workaround for the xbox, but this isn't a solution for my other home theater devices. I need to be able to listen to my receiver and blu - ray player, as I have done on my old PC running Windows XP.

  I have a fresh install of Windows 7 Pro, x-64 on a new machine of self-building.  Everything else works, it is not the machine.  I installed all the latest drivers for my machine.  I have all the updates for Windows 7.  I run the Windows Firewall and Kaspersky Anti Virus 2010.  I installed Microsoft Office 2007, Outlook 2007, Visio 2010 and many other applications 'standard '.  I'm not under any program of low-level "weird."

  As other people "suggested", already tried the action of the outgoing WMP, stop the Windows Media Player Network Sharing Service using service.msc, then by removing the .wmdb (and other files but not directories) by my dirctory users/xxx/AppData/Local/Microsoft/Media Player, restart the Service of network share WMP using services.msc and then restarting WMP.  This had no effect.  (I tried several times with and without having to restart WMP network sharing service manually.)  I tried to change the Windows Media Player Network Sharing Service, tab log (the default on my system) Network Service to Local System with "allow service to interact with desktop" chosen as someone another "suggested".  This does not seem to do anything.  I also tried to uninstall WMP and WMC player (using "turn Windows has or disable"), restart, then adding them and reboot.  This time this icon "turn media sharing on" returned in WMP (the icon is usually party WMP Stream/turn on media sharing window).  This time Windows 7 Pro thought a little longer before doing nothing.  (However, now I get a message error "an error has occurred. Not all features have been changed successfully. "in an attempt to"Reinstall"Windows Media Center after you have reinstalled WMP.)  The resettlement of WMC has returned an error.  I can no longer start Windows Media Center on my PC.

  So, by all posts on this topic, its obvious this is a real bug in Windows 7 (maybe?), (perhaps only on x - 64?).

  Just two more things on my setup... I did not initially set up homegroup (because I have no other Windows 7 machines), but I tried that implemented to see if it had an effect (it didn't).  The part only 'weird' of my installation, I mounted my D: drive (2nd hard drive) in C:\Users (because I use a Solid State Drive for the operating system on C: and don't want the user data on this subject).  This has not caused other problems, but I wanted to throw it out there in case Windows Media Player sharing is something weird here.  (And no, I'm not going to 'try to change' that, unless it is a known fact that that's the problem - and then I would need a different solution to move my user data off the coast of the SSD.)

  So please, let me know what is the real problem why it happened to me (I'm sure some people can turn on streaming in WMP), and what is the real solution.  (There seems to be a multitude of suggestions on the web for all kinds of different 'fixed', but which, if any, is the right one?)  Please do not just suggest things to try.  What is the right benchmark?

  Go to network and sharing center open view full map, right click on your PC and click on manage.

  then open services and applications, and then serivces and find Upnp device host, right click and click on reboot and make sure that it is set to automatic.

  Now scroll down to Windows Media Player Network Sharing service, do a right click and click on reboot and make sure that it is set to automatic also.

  It should work, it worked for me and everyone I know but... The only problem I have is when I restart my PC, the drive share Windows Media network service changes from automatic to automatic (delayed start) and I have to restart again the Upnp device host and Windows Media Player network sharing service.

  Other than having to do every time I restart my PC, it works perfectly.

  Also, if anyone has an idea of why it changes (delayed start) let me know thanks...

• I'm not on IE, I have Mozilla Firefox and have the same problem. I can only make temporary fix and it goes backward.

  We have Windows 7 with Windows Live Mail and Mozilla Firefox.  We are not receive mail and when I click on send and receive and window appears and says I am offline and asks if I want to go to the line, YES/NO, I select Yes the box back again and I select YES once more, then I get a dialog box that has a yellow triangle with our 2 addresses with a canceled address. When I click on the globe to go to the line, then click on send and reception, I recover the small box, I click Yes and back again and I click Yes once more and the great dialog box returns with only an address with a green check mark next to it.
  I'm went to the file in Mozilla and tried to change the button Off Line several times, as recommended.  It did not help.

  I'm not on IE, I have Mozilla Firefox and have the same problem

  Same thing as what? We cannot see what question you are referring.

  However, he is indifferent to any browser that you normally use. A third-party program interferes with the Windows Internet connection. The only way to fix this problem before the registry change is to deselect the work offline option in the file menu of Internet Explorer. (Internet Explorer is much more than a browser. Among other things, it offers connectivity Internet for Windows, used for example by all browsers and e-mail programs.

• Acrobat 8 Professional can not repair acrobat for El Capitan on mac. If I click Cancel the program repairs her self and work. Once I turned off the computer and restart the same problem persists.

  Acrobat 8 Professional does not work when trying to open .pdf documents. Repair instructions does not work. I use OS X El Captain on my mac. However, if I click on the tab to cancel the program request to make changes to the my computer and when I give permission to the program corrections and to open documents (also the work of program OK after the corrections are installed). However, when the computer is turned off, the corrections are not preserved and I have the same problems whenever I start. How can I get a download to make permanent fixes?

  Post edited by: Alvin Strickland - Acrobat 8 Pro initiates changes automatically once I give permission for changes to the computer and does so in a few seconds, the document opens.

  Hi alvins52918593 ,

  Would like to inform that Acrobat 8 Pro is not compatible with this version of MAC OS.

  Please see this KB article for version requirement older:- Tech specs | Adobe Acrobat Pro XI

  Kind regards

  Christian