Satellite P35 - compatibility card mother/cpu?

Similar Questions

• I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

  I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

  Hi KevinRy,

  Welcome to the Microsoft Answers site!

  Unplug all external devices.

  Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

  Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

  1.	Right-click my computerand then click Properties.
  2.	Click the Advanced tab.
  3.	Under Startup and recovery, click settings to open the Startup and recovery dialog box.
  4.	Clear the automatically restart check box, and then click OK many times necessary.
  5.	Restart your computer so that the settings take effect.

  Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

  Please reply back with the error message you get because it helps us to resolve the error.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Compatibility card mother HP/Phenom 960 t

  I have a HP P7 1054, Alvorix H-RS880-card mother Μatx, rated at 95W max (oops on the purchase of a Phenom 965BE).  The motherboard is compatible "9xx" and Phenom 4 x 3.0 ghz 960 t is assessed to 95W.  Will this motherboard support unblock this CPU to present itself as a 6-core, it is strong?  I heard some motherboards do, some don't.  Moreover, the fact that this CPU is 3.4 ghz "turbo" (T) affect compatibility it is, as it technically isn't just a 9xx, this is a 9xxT.  I am currently very literal, it should work if I buy it. Add cache L3 of the Phenom my Anthlon 3.1 stock vs ghz 4 x 645 is primary, without renouncing a clock speed.  Looks like a good 95W replacing the 965BE, also 3.4 ghz but 125W

  I decided to just give up the illegitimate child of 970T and get a Phenom X 6 1045T, I know works, 95W, has 6 hearts, of course, has the L3 I want, 50% L2 more than my 4 X and will run at 3.2 Ghz Turbo when 3 or more cores is closed. For $99 at my local Microcenter, it's worth on my Athlon X 4 645 3.1 Ghz.  Without risk, HP even built desktop computers with this CPU on my exact Board.  The computer is much faster than me in any case using Solidworks.  Now if I can just sell my 125W Phenom X 4 965BE with zero minute on it...

  Thanks for me direction away from what would have been a dead end...

• Satellite A100-192 card mother Question

  Hi, I need your help to indciate what is the motherboard model number for the below:

  Satellite A100-192
  Part number: PSAA9E-01Y01QAR
  Series # 56817119 G

  Appreciate your feeback.

  Kind regards
  HMI

  Hello

  It s a card mother Toshiba ;)

  But unfortunately, I didn't find useful reference numbers, but don t worry PAL advocate you the ASP in your country and could ask the compatible motherboard.

  You can ask only the part number or you can order these parts directly from the ASP.

  I think that this should t be a problem.

  Good bye

• Pavilion A4316F Desktop with M2N78-(Violet6) card mother CPU Upgrade

  I looked at the HP Site before making the CPU to upgrade to purchase (http://support.hp.com/us-en/document/c01925562) my office.  I bought an AMD Phenom II x 4 processor clocked at 3.4 Ghz.  When I installed the CPU and try to start, I have a unknown, computer processor stop error.  From what I can tell on the HP site, this processor should work with this motherboard.  Any suggestions?

  Please provide the role other than whole or number of the plateau of the AMD processor for our review. Only 3.4 Ghz AMD Phenom II x 4 processors I know are the 125 watts Note: AMD Phenom II x 4 965 Black Edition and the140 watts Note: AMD Phenom II x 4 965 Black Edition. None of these processors are compatible with the Violet6 motherboard in your system. The card mother Violet6 is intended to be used with processors up to 95 watts. In addition, "Black Edition" CPUs have discovered clock multipliers to be used in overclocking, but does not support the Violet6 overclocking motherboard.

  Please consider these 95 watt AMD AM3 processors except CPU 'Phenom II X 6' and processors ' B #

• Satellite L300D - graphics card and CPU change

  Hi is possible to upgrade CPU speed and graphics card without having to buy the new phone, but just to buy a graphics card and a new processor and replace the one I have in my laptop? If it's possible there's guide on how to do it right? Thank you.

  Also my laptop overheats much faster, and I have even a portable cooler, what should I do? There is no dust and it's ran clean.

  Hello

  Regarding the hardware upgrades, you must check similar topics. It s is not possible you can also read here:
  [Is it possible to upgrade the CPU or GPU of a Toshiba laptop computer? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=13]

  If your laptop is overheating, you should try to clean using compressed air stream:
  [How to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

  As you can see, all your questions are already answered in other threads, so you should do a forum search before starting a new thread. ;)

• Question about compatibility card mother Satelite P500

  Hello

  I have a Toshiba Satellite P500-14N (only part no PSPGSE-00600FGE) with a problem on the motherboard.

  SPS: A000052610

  P/N: 31TZ1MB0100

  PCB: DATZ1GMB8D0 REV:D

  I find a motherboard

  SPS:A000052120

  P/N: 31TZ1MB0190

  PCBS: DATZ1CMB8F0

  2 motherboard is 100% compatible with each other

  Toshiba offers two different models of P500 with different hardware platform.
  It is with the PSPGSE and PSPG8E part number.
  They are not compatible or identical and have different chipset, processor and graphics card.

  I recommend you get your PSPGSE of the same motherboard.

• Beep card mother/CPU Dell Inspiron 530 problem

  Hi all!

  I recently acquired an Inspiron 530 G33M02 motherboard with a Dual-Core of E7300 processor.  It worked for a few hours while I was updating windows (my brother had not used for 2 years before), but then all of a sudden the screen empties and computer was turned off.

  To try to restart, the powerbutton lit amber, fans would move for a fraction of a second, and the green light would go on feeding.  I tried the power supply in another computer and it worked while I also installed an another working power known in the Inspiron 530 with the same results.  In research, this lead me to believe the motherboard was bad.

  I have order a new traction (taken before using it on a new computer) on ebay and installed.  Now, I'm getting 7 beeps at the station.  It would point to a faulty processor?  I would limit until I have spend more money on a new processor.

  Thanks for any help/insight!

  smwilli

  7 beeps does not indicate a processor problem,

  http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_inspiron_desktop/Inspiron-530_owner%27s%20manual_en-us.PDF

  To know if it is the processor, you will need to install in a "known" compatible work computer, or replace it with a compatible CPU "Known", as it is difficult to distinguish a faulty processor of a faulty motherboard.

  While you can make an informed diagnosis, troubleshooting, the complexity of the components, it is sometimes diagnosis by substitution.

  Bev.

   

• Compatibility card mother Benicia with connector power button on the new case

  IM wanting to upgrade my computer case but he should know if the power button connector will work with the motherboard of benicia.

  Thank you

  Richard

  Depending on the configuration of the connector of power button, HDD connectors and light power connector on the new case, you may need the connectors changes.

• Want to update card mother/CPU to Vista Ultimate Installation

  I run a retail Installation of Vista 32.  Can I do the following to get my (other than the drivers/HAL) installation to work with new material as follows?

  1 insert my Vista 32 then produces DVD for Windows on my current hardware

  2. choose the upgrade option.

  3. when restarting the computer turn it off.

  4. put in the new material and current readers, turn on the computer

  5. let the 'upgrade' installation continues.

  6. Add all updates since I first installed Vista.

  Note: My install DVD has already integrated SP1.

  Thank you much for the help on this issue.

  When you change the motherboards you should be able to do a clean install to load the required drivers.

  See you soon.

  Mick Murphy - Microsoft partner

• I get a Toshiba satellite 1900-102 with a default card mother work

  Does anyone have a default Toshiba satellite 1900-102 with a card mother work and is willing to sell?

  Or does anyone know where to find that?

  Hi Erdl,

  I think this is the wrong forum to ask questions about buying used and portable defects! I understand toshiba as well as this forum is only for technical user to help!

  In my opinion, you will have more luck at ebay or used equipment selling home pages!

  Sorry
  Campino

• SR1600AN with ms-7184 mother CPU upgrade card

  Desktop PC is a HP Compaq Presario SR1600AN, he has a card mother MS-7184 (socket 939) who came equipped with a Sempron processor. This motherboard will be a CPU Athlon 64 4000 + (number ADA3700DAA5BN)?

  Yes and again above:

  • Supports AMD Athlon 64 X 2 (up to 4800 +) and Sempron processors (up to 3200 +)

  From there:

  http://support.HP.com/us-en/document/c00378480

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Error 0X0000007E Stop after installing the new card mother and CPU.

  Original title: Stop error after installing the new card mother and CPU.

  After I installed a new motherboard and CPU I got a stop error 0X0000007E (0XC0000005, 0XB77EA756, 0XB84C742C, 0xB84C7128) and it restarted immediately. It always starts in safe mode, but I can't understand what is wrong. The old processor is a pentium 4 3 ghz, not sure what the motherboard was, new processor is AMD Athlon 64 X 2 Dual core 4200 + and I only know that the motherboard is an ASUS socket AM2. Device Manager does not recognize the CPU correctly, it shows just two entries called processor. As far as I can tell, it's almost certainly a driver issue, but I don't know how to diagnose or fix this. I am running windows XP home, I removed my video card, running 2 hard drives at 120 g (M) and 200 g (S), a DVD drive (M) and a reader of CD (S), and a stick of RAM to 1 GB.

  If you have made the change without having to reinstall XP, you will be taking and Pray H@ll. the best thing to do would be to reinstall XP and make sure you have the drivers available for your motherboard available so that you can update the installed chipset. In addition, be aware that if you have an OEM of Windows version, the license is dead when you changed the mother/CPU card.

  I hope this helps.

• If I have to buy a new license for Windows if I replace the mother/CPU card

  Original title:Win 7 OEM + new motherboard

  I have a prégénérée with Windows preinstalled machine and the mother/cpu card must be replaced.  If I replace them should I buy a new Windows license?

  Thank you

  There are provisions for the replacement of defective motherboards without the need to buy another license OEM, this isn't really a problem for major pc manufacturers that replace motherboards warranty.  Small manufacturers have a leeway as long as the motherboard is designed as a replacement for a defective.  If the motherboard is replaced as an 'upgrade' then the terms of this EULA do not allow this.

  John

• I want to improve my card mother and CPU on my PC. Can I use transfer windows settings for it?

  I want to improve my card mother and CPU on my PC. I like to keep all my settings from my games, etc, so I don't have to buy/purchase new and purchase/buy a new OS Win. I am running Win 7 Pro. What is the best way to address the issue? I keep my OS on a SSD and all the other stuff is on a separate HARD disk. Basically, I need to install the new chipset and other pilots MB.

  You can save files and settings and restore to the new installation of Windows, but the games cannot be guaranteed. Just give a try. If it works, it's fine. If this isn't the case, you must reinstall the games.