Satellite Pro A200-1JV memory expansion

Similar Questions

• Satellite Pro A200 PSAE4E memory upgrade:

  Satellite Pro A200-PSAE4E: comes with sticks of memory 2 x 0.5 GB installed.
  I think that these are some DDR2?
  Please can anyone confirm this and advise the maximum memory I can install as I appreciate different for
  models... but I can't find any information for this Satellite Pro A200-PSAE4E:
  Dave was soon

  Yes. Your portable computer is DDR2 RAM module. I don't know about you but I think you can improve it up to 4 GB. You can for example use a 2 GB RAM and level to 2.5 GB.
  Compatible RAM 2 GB module is with the PA3513U-1M2G part number.

  Good bye

• Satellite Pro A200 - hard drive has lost half it's memory

  I have a toshiba Satellite Pro A200 on Vista. Vista came preloaded and I not all disks for it. I got it from the new (Sept 2007). The hard disk is divided into units. Recently my C drive has filled competely and I now no space left (went 55gigs) I store some data in this drive. All my multimedia elements (music, photos, and other files) is in my E drive. I have to run C Cleaner whenever I start in order to have enough space for the operation of the computer. I also remove all but the last restore point in order to function.

  I am at my wits end and think I must have a virus or something. Is there a way to restore the computer to the 'new '? I have all my files backed up on an external hard drive, so I don't mind from scratch. Not keeping in mind I have no install discs as Vista came preloaded.

  Can anyone help? Please, I beg you!

  Hello

  If you don't have a recovery disk, you can order from Toshiba for the money. Otherwise, you can get copy of Windows and installed with the drivers of Toshiba (http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp)
  Then, you mentioned that hard drive has lost half it's memory, tell you if it was ok before but not available? Please check disk management, utility of the Panel. What is shown here?

• Satellite Pro A200 - 1 MI - need driver for PCI memory controller

  I have the Toshiba Satellite Pro A200-1 MI (PSAE7E) having a problem with the PCI memory controller on my laptop.
  When I go to Device Manager it shows the question mark in the tab other devices and when I go, it is yellow? (question mark) and! (typical brand) to the PCI memory controller. I took and downloaded all the drivers of your site:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EU

  for XP, but I'm not sure what kind of driver do I need to install for PCI controller memory, it is driver bios or something else? I just need to know what to install to overcome this problem with my device manager and the PCI memory controller.
  Thanks in advance!

  Hello akibono

  I imagine that you have installed Windows XP Home clean on your laptop and now you want to install all the drivers, tools and utilities. Am I right about that?

  In any case, after the installation of Windows XP Home edition you install all the drivers, tools and utilities in the order of the specific facilities. After doing this, everything should be OK and every hardware component will be correctly configured.
  Please install all the stuff as follows:
  WINDOWS XP HOME EDITION
  Driver Chipset
  Display driver
  Audio driver
  Driver modem
  Storage Manager
  LAN driver
  Touchpad driver
  WLAN driver
  Toshiba Assist
  Flash Media driver
  Driver webcam
  Hardware configuration
  Controls
  And so on

  I hope that everything will be OK.

• Upgrade memory on the Satellite Pro A200

  Have two cell phones of #PSAE1E - 00T002EN Satellite Pro A200 and wanted to know if I can pass the 2 x 1 GB memory 2 x 2 GB?

  If I understand correctly what ask you, you want to upgrade memory of 4 GB laptops.

  Well, I think that it s is not possible.
  The Satellite Pro A200 supports maximum 2 GB of RAM (2 x 1 GB), then you will not be able to use 2 x 2 GB modules.

  Best regards dude

• Satellite Pro A200 - shows only 3 GB instead of 4 GB of RAM

  Hello

  2 years ago I had a Satellite Pro A200 as a professional laptop and it works with XP SP2, later with SP3. With 2 GB, it shows 2 GB memory in Windows - and I know it's a Radeon 7500 with 256 MB memory graphics individual, and there is no shared memory.

  I upgraded to 4 GB, but Windows shows exactly 3 GB. BIOS shows 4 GB and ATI system monitor shows 4 GB. I know that 4 GB is not possible under XP 32-bit, only on Windows 2003 R2 32 bit or Vista - but on desktop systems, I've seen values between 3.3 and 3.7 GB.

  So, where's the memory? It looks like a bug - the chips of memory have two 2 GB I checked this. Because it's a company laptop I can not just switch to 64-bit XP :-(

  There's no option in the BIOS - first I thought that it is the graphics card, but mine has independent graphics with own memory so that the computer comes up with MB 2048 or 4096 after the upgrade.

  Shared memory would show about 1900 MB of RAM for the operating system as my private EEEpc.

  Hi shadowmaster_1,

  > I know that 4 GB is not possible under XP 32 bit
  Then why do you ask this question here if you already know? Moreover, it s not a limitation in XP, it s a material limitation on all 32-bit systems

  > only on Windows 2003 R2 32 bit or Vista
  And who says that Windows 2003 or Vista can use 4 GB? Okay, there's an update for Vista where 4 GB correct displayed in system properties, but that doesn't make no difference. Vista 32 bit peut t use all of 4GB, it s only cosmetic improvements! ;)

  > So where is memory?
  Memory is installed on your computer, but can t be used complelty with a 32 bit OS.

  At the end of the story: If you want to use 4 GB, you need to install a 64 bit OS. On all the 32 bit OS, you can use only upward to ~3.2GB RAM!

• Cannot ping localhost - error code 2 on Satellite Pro A200

  Dear COMPUTER gurus,

  I have a portable Satellite Pro A200.
  When I ping the local host, it says could not contact the pilot of intellectual property, error code 2.
  I tried to fix the winsock using articles from microsoft without success.

  Now I want to reapair the operating system using the recovery DVD.

  The recovery DVD has a repair option?
  If this isn't the case, anyone how to solve this problem?

  Help please!
  This is the result, I was using the pc diagnostic tool.

  Date 2008-08-30 01:47:12

  [Information on PC]
  Model name Satellite Pro A200
  Part number PSAF4U - 004 00D
  Serial number Y7312740Q
  Version of the OS Microsoft Windows XP Professional 5.1.2600 Service Pack 2
  BIOS Version 1.70
  Processor Intel (r) Core (TM) 2 Duo processor T7250 @ 2.00 GHz
  RAM 1024MB of physical memory
  Disk capacity hard 120,031,511,040 [bytes] 111.788 [GB]
  Capacity of the hard drive space free 92,245,069,824 [bytes] 85.910 [GB]
  Version Mobile Intel (r) 965 Express Chipset Family video = 6.14.10.4833
  Screen resolution 1280 x 768 Pixels
  Color quality, true color (32 bit)
  Audio version of Realtek High Definition Audio = 5.10.0.5440
  Network Marvell Yukon 88E8039 PCI-E Fast Ethernet Controller = 10.14.6.3 version = MAC address
  Intel (r) PRO/Wireless 3945ABG Network Connection version = 11.1.0.100 references MAC address =
  TOSHIBA Software Modem Modem version = 2.1.77.0
  Version of the IDE Device 1 TSSTcorp CDDVDW TS-L632H FW = TO01
  Interface IDE 2 no
  Interface IDE 3 no
  Interface IDE 4 no
  IDE Device 5 Hitachi HTS542512K9SA00
  Interface IDE 6 no
  Internet Explorer 7.0.5730.11

  Hello

  > I tried to fix the Winsock by using the Microsoft s articles with no luck
  I guess you're meaning to this MS article knowledge base:
  [How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP, and in Windows Vista: http://support.microsoft.com/kb/811259]

  Well, I searched a bit around and discovered that the solution described in article 811259 doesn t help in all cases

  So searched the Web of the 3rd party site and someone has suggested to try these tips.
  It s also from Microsoft:
  * [How to reset the Protocol Internet (TCP/IP) in Windows XP | http://support.microsoft.com/kb/299357] *.

  So check it out maybe it helps

  If not, then you may be forced to reinstall your operating system, because the repair option is not included in the Toshiba Recovery CD ;(

  Concerning

• Satellite Pro A200 - does not start with 4 GB of RAM

  Hello

  I installed 2 x 2 GB, but it seems that it does not work. The funniest is that when current to run just a bunch of memory (2 GB so) it works, when you run both, it does not work and it freezes. This is the Samsung 2 GB 2Rx8 PC2 - 6400 s - 666 - 12 - E3

  Ive' installed the BIOS (64 bit v2.60) was last updated for the Satellite Pro A200 and I am running Windows 7 64 bit

  Hi caribman

  What Satellite Pro A200 you have exactly?

  I ask this question because some A200 models were equipped with chipsets 943GML and these models support 2 GB only!

• Satellite Pro A200 hangs completely, I have to close by switch

  Hello

  I got the Satellite Pro A200 (PSAE4E) for 19 months with absolutely no problem. Recently, I noticed that it crashes all of a sudden without any warning whatsoever. I have to resort to the closure of the power switch, which I hate to do. It opens normally again without giving any other major error msg that the first unexpected shutdown has occurred.

  What worries me is that it continues to be again and again. I did the built-in diagnostic test and it showed the FAILURE on the NETWORK. Rest of the things passed including HARD DRIVE, memory, cpu, etc. In the Device Manager section, there is a yellow triangle card 6TO4 and isatap. {....}. I wonder if this is the problem or is it more sinister problem with my pc.

  Any help on this would be sincerely appreciated.

  Thank you

  Hello

  AFAIK the 6to4 adapter has something to do with the TCP/IP version 6 protocol.
  You can check network properties if TCP/IP v6 is enabled (checked).
  If it s not checked then check it in.

  Otherwise, you can try to uninstall this card in the Device Manager and disable the TCP/IP v6 in network properties.

  But to be honest I put t know if this 6 TCP/IP issues has something to do with the breaking of low BONE
  In the worst case, you could recover the unit to check if the same thing would happen with a clean operating system.

• Satellite Pro A200 - new RAM work together

  Laptop Toshiba Satellite Pro A200-PSAF1A-003002, I bought the year last with RAM 2x512MB that I try to update my 3 GB RAM and I bought 2 RAM KTT667D2 / 1 G & KTT667D2 / 2G Kingston memory.

  I added that the 2 strips of RAM in the laptop, but it does not start. The power and the drive lights and flash for 3 times everything off. No boot. But I remove one of the sticks of RAM and it starts very well and the RAM has been upgraded in the system.

  I tried with the sticks and the two slots to remove 'bad slot' ideas and a stick of RAM works in a thin slot. Paste works in slot 1 or slot 2 and stick b works in slot 1 or 2, but not both at the same time. Is it simply a setting I'm missing somewhere? I checked the BIOS version is 1.7, I need to update my BIOS? Help, please

  Thank you
  Yana

  I think that the modules are not compatible together and that is the reason why each module works in each slot.

  Did you buy KTT667D2/1 and KTT667D2 / 2G. Different modules of s and are not working together.
  You should buy only the modules with the same specifications and capacity (for example, 2x1GB and 2x2gb).

• Problems of the product on the Satellite Pro A200 recovery

  Hello

  I have a Satellite Pro A200. She runs very slowly and sometimes it crashes when I connect.
  Also the homepage was hacked and I tried several anti-spyware and they did not work.

  I have the product recovery disc, but the problem the DVD rom drive stopped working.
  The light is on, but it will not open unless you use the manual unlocking.
  I removed and checked the connections, but it seems okay.

  The CD-ROM/DVD-rom has disappeared from the Device Manager and does not come under the material.
  I tried the system restore, but it won't work.

  Is there anyway that you can use the product recovery software if you start from a USB?

  I tried to restart the computer and choose boot from CD, but it won't give me this option.
  I looked in the bios and only boot options it gives are hard disk, CD rom, land and FDD

  > Is there anyway that you can use the product recovery software if you start from a USB?

  No, this Toshiba recovery disc cannot be copied to USB flash memory and used for installing the OS. I'm afraid that it would work not m.

  But if you have a Microsoft Windows CD, you should be able to create a USB bootable flash stick. In internet, you will find lots of useful instructions step by step how create this bootable USB key.

  But boot from USB flash memory stick must be definitely possible since the BIOS supports bootable devices on:
  Drive floppy USB, HDD, ODD, Network (LAN), USB memory

• Upgraded Satellite Pro A200 - 4 GB of Ram, but I have only 3 GB

  I have a satellite Pro A200 and I uppgraded from 2 to 4 GB of Ram.
  It was not a problem as long as I have didn't ' tt start Windows Vista.

  In the back when the memory is counting upp there are 4 GB (40XX something) but when I loggen into victory. There is only 3 GB left.

  Whence my A200 Sat stuck the other 1 GB?
  I have now that the graphics card takes upp to 250 MB, but there are still some 750 GB is not there?

  Is there anyone who can help me and solve this problem, I'm just 100% satisfied with my A200 but it buggs me that is missing 750MO I SEAP for.

  Hey Buddy

  For several years he s already known that the Windows 32 bit doesn t recognize all of the 4 GB due to the limitation of the 32 bit OS.
  I think you should visit the Microsoft good, old for details ;)

  For example this one:
  http://support.Microsoft.com/?kbid&ID=929605

  Best regards

• Satellite Pro A200 - 26 minutes of normal time remaining?

  Hi all

  My laptop Satellite Pro A200 is a little over 1.5 years (or young: P) and I have a huge problem with the battery - it only lasts for a total of _26 minutes_ under "high performace" mode in Vista - other modes the power increase time to 5-7 minutes.

  I've tweated the system configuration for:
  -too few programs running at startup;
  d ' use as little memory in what concerns the graphics (as in the disabled vista themes and operations "fantasies" show window contents while dragging).
  -stay on the low light.

  The programs that run at startup are my anti virus (F-Secure) and ATI catalyst control.

  I also cleaned the registry conflicts and scan for viruses regularly.

  I used Ubuntu on this laptop as well and the battery life is not that much better, which leads me to the conclusion that the battery comes to an end.

  I was wondering if this duration of battery life (26 minutes max on high performace) is normal for a laptop after only 1.5 years? * (I don't remember how long it has lasted when I first bought).

  Also, I have a laptop from other manufacturer of 2 years and its battery lasts a minimum of 4 hours (on Windows XP).
  The two laptop batteries are 6 cells.

  Any suggestions on how to improve my battery life?

  Thanks in advance.

  > Satellite Pro A200 laptop computer is a little over 1.5 years and I have a huge problem with the battery - it only lasts for a total of 26 minutes in "high performace" mode in Vista

  Battery working time depends on different factors:

  If parts of different hardware such as CPU, GPU, HDD, ODD, display perform better performance then dramatically decreases your battery work time
  In addition, if you lose a stronger battery (9 or 12 cells cell) then you should be abele run Notepad a lot more time using the battery power.
  In addition, the battery loses the own performance systematically and after a long period of use, you will need to replace the battery.

  However, if you wish, you can check the Vista Power Options to increase the working time of battery:
  Here's a nice article:

  How to manage Windows Vista power management features
  http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

  But in the worst case you will need a new, stronger battery

• Satellite Pro A200: Card reader does not work after installing XP

  Hello...

  I deleted Windows Vista from my Satellite Pro A200 for XP Home.
  I'm much happier with the machine now, but I am unable to get any response from the card reader. There is no mention in the manual supplied with the machine.
  I cannot find any reference to it in the Control Panel hardware Manager and nothing changes here in it when I insert a SD memory card.

  I had no cause to try the drive before removing Vista, so I don't know if it never worked... Although I guess he did.
  A search of a pilot running in the download section had no success, and this forum has no direct answers.

  Does anyone have an idea what I have to do to make this work?

  Mintin Popa.

  Hello

  I put t see serious reasons why your card reader shouldn't run with installed Windows XP t/function.
  What you need is the right driver.

  The Toshiba driver page provides all the drivers Win XP and there is also an XP driver for the multi card reader.

  You need a Texas Instruments Flash Media Driver. He is a driver for your bridge Media Slot.
  This slot allows you to insert an SD card, Memory Stick (Pro) or xD picture cards.

  See you soon

• Satellite Pro A200 (GE) - 1F9 DDR2 or DDR3?

  Hello

  I phoned every retailer and make contact there, but no body seems to know;

  What type is the GPU in the A200-1F9, GDDR2 or GDDR3?

  I think the hardware is the al even over Europe, isn t it? With C2D T7300, 2 GB Ram, 250 Gb HD AND ATI Radeon HD 2600 w / 256 MB of VRAM.

  But the thing that no Forum and 'professional' staff is able to answer is whether it's DDR2 or DDR3.

  So please, make my day and help me. Because I m getting pretty aggravated?
  And send a copy to ATI, Toshiba Sweden and every retailer who have this model.

  Cincearly

  Johan Oeberg

  Hello

  The Satellite Pro A200-1F9 belongs to the series of PSAE7E and it s a part number: PSAE7E-007004N5. Am I wrong?

  The laptop comes with the graphics card from ATI Mobility Radeon X 2600 (sometimes called the Radeon HD 2600).
  The code name is M76.

  So I searched for + ATI Radeon X 2600 code M76 name + and found these GPU specifications:

  Video memory-> external with TurboCache

  _Video memory Capacity_
  Local cache 256MB / 512MB
  _HyperMemory Capacity_
  0MB@sys RAM 512 MB
  256MB@sys RAM 1024MB

  Please note that the * total * video memory is * sum * of _locale cache_ and _Hyper Memory_!

  _Bus Width_
  128bit@256MB (GDDR2) Local Cache
  128bit@512MB (GDDR2) Local Cache
  128bit@256MB (GDDR3) Local Cache
  256bit@256MB (GDDR3) Local Cache

  http://ATI.AMD.com/products/MobilityRadeonhd2600/index.html

  It seems that this card is compatible with both of them; GDDR2 & GDDR3
  This is what I found.