Satellite Pro A300 - the LAN connection icon disappeared

Can anyone help?
My computer went funny last night and a message popped up saying LAN cable disconnected while I use it wireless.
Its happened before and I went into something where I had to check the LAN option and everything came back new.

Anyone has any suggestions please?

Thank you very much.

Hi sue030_3,

LAN card still not correctly shown in device without yellow exclamation Manager?
What operating system you are using?

Maybe it help if you reinstall the the official website of Toshiba LAN driver:
http://EU.computers.Toshiba-Europe.com

Check this box!

Tags: Toshiba

Similar Questions

  • Re: Satellite Pro A300-1EA - wireless connection, drop all the time

    Hi, I have a problem with my wireless connection fall all the time on my Satellite Pro A300 1EA.

    It happened earlier, but I've fiddled about a little with change of drivers and the removal of the connection settings for the registry and it then worked fine for months, until yesterday.

    There were several updates for Windows installed yesterday, but none of them have been updated driver for the wireless card, and they don't look like they should cause problems. The fact that the problem happened before makes me think that the updates can be anything to do with it.

    I use the * Intel PRO/Wireless 3945/4965/5100/5300 * for Vista 32 - bit version 12.2.0.11.3 drivers from the Toshiba download page.

    Other computers on the same access point have no problem, so I think it is specific to this laptop. The connection speed is normally 6 Mbps, but I cannot even check e-mail now without the abandonment of the connection.

    Laptop will be thrown against a wall soon if no one can help you.

    Thanks in advance.

    Edit: I've already made sure power settings are at maximum to the WLAN card, even if on battery, or what power management.

    Post edited by: mjbcrawf

    Hello

    Have you tried to use the Windows System Restore feature? After that your WLAN should work fine again.

    In addition, I can recommend the latest WLAN driver in the Intel page, it s version 12.4.xxxx. I installed the driver on my Qosmio laptop and don t have any problems with it: [www.intel.com].

    If you have any other questions, please let us know!

  • Satellite Pro A300 - the cursor moves continuously when connected an external mouse

    Hello

    I have a Satellite Pro A300. When I connect a mouse directly by USB the cursor moves constantly. I also have a mouse attached via a docking station, Toshiba and that works perfectly.

    It doesn't matter what USB port I use or if the laptop is connected to the docking station or not, or if it works on AC or on battery power.

    I thought it was the mouse that was the problem, so I went and bought a new one but the problem persists.

    Actually, while I wrote this post, he has stopped doing that and then started! Very frustrating.

    Can anyone help?

    Thank you

    Susib

    Hello

    How about, the touchpad is the slider moves and jumps using the touchpad?
    Try to disable the touchpad while using the USB mouse control if you can notice a difference

    What about BIOS?
    You have the latest version installed?
    Check it!

  • Satellite Pro A300 - Wi - Fi connectivity limited after sleep mod

    I just buy a Satellite Pro A300 with Vista, but when he falls asleep or I close the lid, wake him up he cannot connect to the internet (Wi - Fi) until I reboot. I get an error message that I have "limited connectivity" to my wireless network. Can anyone help?

    As a solution, I recommend updating the BIOS and then update the WLAN card driver.

  • Satellite Pro A300 - error - webcam driver open failed

    Hello

    I have the Satellite Pro A300
    The web cam stopped working after upgrading XP in Vista (webcam driver open fail.) Restart camera or computer)

    Any help

    Hello!

    I used the forum search and founded a good display of user Akuma.
    Maybe it's the s solution:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=136549

    Good luck!

    Good bye

  • Satellite Pro A300-28V - my bluescreens disappeared when the BIOS has been upgraded

    I'm curious to know about it. The machine is a Satellite Pro A300-28V with Vista32/Win7.
    Had problems with bluescreen dumps referring to 'iaStor.sys '. I was about to send the laptop in for repair when I made this last effort to resolve the problem. Upgrade 1.9 to 2 BIOS, 1 - Win.

    All of a sudden my system image succeeded! Even at an Iomega home network HDD. Without complex!
    No blue screen exports even at startup 'cold' (after a free night)!

    For now, I leave the computer in sleep mode while I am at work. Let's see if he managed a day without landfills.

    What is the technical difference between 1.9 and 2.1 BIOS? No idea if it's something with iaStor.sys to do?

    /ssstsg

    Spelling was edited by: ssstsg

    Hi mate

    This is really good news as your BSOD displeasured after the BIOS update.
    The BIOS give instructions to the test power - on self test (POST) and provide basic information on how to manage components of the laptop, as HDD, ODD memory, that are required to load the operating system.

    Who knows, what was changed in the update but the main thing is that all the work and the update solve your BSOD

    > No idea if she has something with iaStor.sys to do?
    iaStor.sys is part of the SATA driver who is required to recognize the HARD drive using AHCI mode.

  • Satellite Pro A300 - cursor is random if the power is connected

    I have a Toshiba Satellite Pro A300 running Vista Business and my synaptic touchpad cursor started becoming erratic and cannot be controlled normally.

    It is hard to move and it will open programs and the internet, etc. This happens every time power outlet is plugged but normally works on battery. I ran Malwarebytes and AVG 8 scans, but they come without any problem. I restarted mode safe (after a forced closed down) and the problem has always existed.

    Can someone throw some advice on this problem?

    Strange. I never heard a question also and now I can t say what is the reason for this, but I hope that I can help you identify the reason.

    It would be interesting to know if you have the same problem with an external mouse. You can check this please?
    You use the original from Toshiba AC adapter or another?

    Perhaps the problem can be solved if you update the BIOS. You can find it on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Good luck!

  • Satellite Pro A300 freezes when on the internet

    Satellite Pro A300 freezes when on the internet & the only way to turn it off is to take out the battery. Bought new Dec 2010 & is under warranty - suggestions?

    Hello

    have you tried to update drivers Lan (wlan)? What browser do you use? I guess, the Internet explorer, try firefox or opera. Also, your computer may be infected with the virus, or blocked by the firewall. Have you installed software before it starts? Is this ok when you bought it? I ask you too, because you do not have a lot of information.
    It is especially the driver, software problem.

  • Satellite Pro A300: No volume indicator displays on the screen

    Hello

    I have a Satellite Pro A300 with a volume knob. When you change the volume to use, it works (even if this does not work as the starting system which is really annoying, especially when you turn it on every day in a library) However there are usually no witnesses screen to show at what level the volume is at. Once, I saw a display flag which seemed to be apart Toshiba Hot Key Utility but it disappeared again after a reboot.

    It is really impossible to do not be able to see at what level the volume is such that you change. Can someone help me out here? Brands goes for anyone who can help me unravel so volume level start!

    Hi CiRi,

    try to use the "Fn + esc" key to cut your system...
    He will remain silent even for restart the computer...

    If none of the keys have a special feature of "Fn" reinstall the 'value added package' and 'hotkeys' of the toshiba download page.

  • Satellite Pro A300 - nasal sound if the WIFI is enabled

    School, I work has recently bought some A300s, but when they turn them on, all sounds are stuttering.

    This is the jingle of Windows startup, the CD and DVD, and programs installed on the computer laptop itself. The only way I can stop the sound problems is by disabling the wireless lan. I tried to uninstall and reinstall, update the driver, replace the driver, but all without success. The school network is wireless so disable the wireless LAN cards long isn't really an option.

    Anyone got any ideas?

    Hey xarkaltos,

    It would be interesting to know what OS you are using. I have too many Satellite Pro A300 and I can t t notice nasal sound if the WIFI is enabled. My A300 works pretty well and doesn't make strange sounds.

    Maybe you have installed another OS, if you restore the OS from Toshiba by using the recovery disc or HARD drive recovery option.
    Otherwise, follow the instructions posted by Al - eX.

  • Satellite Pro A300-28R - how to enable virtualization in the BIOS?

    I tried to enable the setting of virtualization in the BIOS and the setting is disabled and I was unable to change the setting to activate. I have flashed the BIOS to the new version, and now how to enable virtualization has completely disappeared.
    The laptop model is Satellite Pro A300-28R with Windows 7 Professional and BIOS version 2.10.

    How do I enable virtualization setting so I can run Windows Virtual PC mode to run compatible programs XP?

    Hello

    Did you check the specifications of your laptop first?

    The fact is that the processor must support this virtualization and according to the Web of Toshiba site, your laptop is equipped with processor Core 2 Duo T5870.
    I checked this on the page of Intel CPU and virtualization isn't supported. That means t, you can use this feature!

    Here you can see this:
    http://Ark.Intel.com/product.aspx?ID=37034

  • Need help with the installation of Windows XP Home on my Satellite Pro A300-1DZ

    Hi all.

    I have a Satellite Pro A300-1DZ system unit, model no PSAG1E-OOFOO4EN (think they are 'o' and not '0', circle with slash through it) with WXP Pro.

    I recently contracted a virus inside and as he removed, however it is not good so I want to re - install Windows XP Home edition. I backed up the computer, I have a Windows XP Home SP2 Pro edition disk and I have my product key.
    I put the CD/DVD in BIOS to run 1 drive and tells me that I can boot from the CD, I press a button and it loads the CD, select the option where to install windows.

    BUT! I can t go further than what windows does not detect the HD said he s not now, or whatever.

    My question is this: Please can someone me step by step instructions on how to reinstall XP and a link to all the drivers I need to make it work?

    PLEEASE!

    It's simple on my PC, also, please keep in mind, I am best suited for working on cars, I'm not stupid, but my calloused hands search for computers a little more difficult than Motors please not in many computer technical terms.
    I myself am the slow education in the dark arts of computers. LOL :)

    PS. the laptop has a Vista Basic sticker on it, but it is certainly the XP pro operating system. :)

    Hi jeff

    Here's your solution:
    1. go to bios with F2 when you see the toshiba start screen.
    2. Select the arrow to the left using the "Advanced".
    3 press down until you get to "SATA Controller Mode".
    4 change, using F7/F8, Chang [AHCI] setting [compatibility].
    5. make sure the CD/DVD drive is the first to start and F10 save and exit. computer restart when you are prompted to "press any key" press a button and hey presto as before windows will start the installation, but this time you won't get windows you said:

    Set up did not find Ant hard disks installed on your computer.

    Make sure any drive HARD are powered on and properly connected to your computer and any hard disk related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or Setup program.

    implementation cannot continue press f3 to goto hell... uh I mean leaving the installation

    And you can continue on your installation of Windows XP Home edition.

    Hope I helped many other jeff's in the same boat. XD

  • Satellite Pro A300 - I get the 'Windows search' if I left click on any folder

    I just bought a Satellite Pro A300 and it downgraded to Windows XP SP3.

    When I click the icon of any folder on my hard drive I got the "Windows Search" window instead of the folder. When I right click on any folder icon, the first item on the menu (in bold) is "search".

    How can I change the order of these items in menu so as 'Open' is the first element?

    Delete (Control Panel Add / Remove Programs) the installation of Windows Search without affecting any software I have loaded?

    Looking for Windows installation installed the likely cause of my problem?

    Thank you

    Murray

    Just solved my problem:

    1. the order of the items in the context menu of files can be changed by updating actions for file types specified in the Folder Options Menu. Select Folder Options + of + the + Tools + menu of any folder, select + File Types + and scroll to the bottom for * file *. Click on * advanced * then * New * and add * open * with * Explorer * as the program to use. Click on * OK * and * Close * and bingo! Appears in the order of the menu shortcut in XP is open before you search, but in XP Pro followed research of Open / Explore.

    2. the utility Windows search can be deleted without problem despite the warning launched - Microsoft Web site indicates the warning is simply a generic warning and it is highly unlikely that removal will affect all software installed since the loading search utility.

    3. the Windows Search utility is NOT the cause of this problem.

    Trust that the other could save hours of research that I had to do to find this solution...

  • Satellite Pro A300 - how to get the sound on the TV with VGA cable?

    Hello world

    I have a real problem connecting my Satellite Pro A300 to my Samsung HDTV.
    The video works fine - I used a VGA connection on the laptop and the TV.

    The problem I have is healthy.
    I want the sound either also come from the TV. I tried a jack of 3.5 m from the headphone jack of the laptop to a red and white connection RCA audio on the TV, but it doesn't seem to work.

    Does anyone have any ideas or advice?
    I need of additional drivers, etc., or do some settings need to be changed etc etc.

    Hello

    Normally, to use the 3.5 mm jack plug in the headphones, you need an adapter cable.
    At one end, it has a 3.5 mm jack and the other side to connect red and white audio RCA connections.
    Here is an example of what I mean:
    http://www.optimization-world.com/IMG/prod/3_5_mm_rca_audio.jpg

    I m using such an adapter without any problem. You n t need an additional driver, or something more. It's the same as if you were using a helmet. :)

  • Satellite Pro A100 does not connect to the internet if the power adapter is plugged

    Hello
    I have a Satellite Pro A100
    The machine will connect to internet on battery OK. However, if the power supply is connected it does not connect. Any ideas?
    See you soon
    Jim

    Hello

    How do you connect to the internet? With the WLan or cable LAN?
    It s very unusual as the intermits connection when the power adapter is connected.

    This question appears because you buy the laptop?

Maybe you are looking for

  • Satellite A100-233 against Satellite M100-164

    Hello! I am considering buying a Satellite A100-233 or M100-164. I was looking on the specifications for each, and I found that they are very similar (almost identical except for the size of the screen). However, I see that the M100-164 Toshiba Enhan

  • It shows a memory leak?

    LabView is running an example VI provided by NHR material for a battery Simulator. After about 10 minutes of runing the memory usage increases at a steady pace. In the attached picture, the black circle's use of memory at startup and the red circle i

  • Digital output to a different voltage?

    Hi all I finally finished my program of data acquisition for the laboratory, which made the acquisition of AI voltage multi-channel digital outputs with timed to control the gas valves. My post-doc asked an additional feature, however, which must be

  • V5 - 571p 8.1 touch. I can't connect my BT speakers. It is said that they are paired and working.

    I got new speakers BT wireless for my laptop but cannot get their work. I tried to reload the drivers, but that has not helped. When I go to Device Manager it says that they are installed and working, but they do not appear as an option to select spe

  • lost all the restore points after the reinstatement of windows

    Original title: have just re-recorded windows software, now Ifind I lost all the restore points. How can I get the old one back? Windows has been registered online. Checked restore points after recording and found that the only listed restore point w