Satellite Pro L500 - how to turn on hardware virtualization?

Hello

Please can someone tell me how to activate it? I have updated the BIOS to 1.9 and still can not see as an option? Secureable tells me that this cell phone it will work, but it's off!

Thank you very much

Hi nickcrush,

Hardware virtualization isn't according to the version of the BIOS, the question is if your CPU support this feature.

Satellite Pro L500 are equipped with different s CPU, so I recommend the Intel page. Check the details of your CPU if it takes support this feature or not.

Tags: Toshiba

Similar Questions

  • How to turn on hardware virtualization on my computer?

    Hello community VMware,

    I have a question quite simple and intuitive. At the moment the computer I use is an Acer Aspire 7736-6080 running Windows 7 Ultimate 64 bit and I'm using VMware Workstation 7.0

    I get an error in VMware saying that I need to enable hardware virtualization, but I have no idea on how to do it eventually. I discovered on the internet that I need to do it via the BIOS and it must be called virtualization technology (VT).  I have a BIOS from Phoenix Technologies and I went through the BIOS configuration utility and there it says nothing on VT or hardware virtualization. So I don't know how to solve the problem. I need someone to show me how to turn on VT or hardware for virtualization. If it's any help the CPU I used is Intel (r) Core 2 Duo T6600 CPU 2.20 GHz and Intel Centrino inside.

    Any help will be much appreciated.

    Thanks in advance,

    Patrick Goralski

    your previous thread has been locked because of what you're trying to reach, so be careful

    How to turn on hardware virtualization?

    In addition, for what it's worth sytem does not support you the VT anyway, then you will not be able to run 64-bit guests.

  • Satellite Pro A40 - how to turn on wireless?

    Hello

    I recently formatted and installed Windows XP Professional on a Toshiba Satellite Pro A40.
    But I can't understand how to activate Wifi on the computer.

    When I press FN + F8, nothing happens. All the drivers are installed properly, no errors appear in the Device Manager in Windows. Do I have to install specific drivers, like I used to use the other FN keys (I needed to install common Modules)?

    I also have a (Linksys Wireless - G WPC54G) PCMCIA card. When I put the card in the laptop, the power led flashes once, but also nothing happens. This card is not compatible with this laptop?

    Please can you give me some advice?

    Thanks in advance.

    Kind regards

    Nothing

    Hey,.

    What is the card listed WLAN correctly in Device Manager? Or you see yellow exclamation points or unknown devices?

    Maybe you should try to update the WLAN driver. On the Toshiba site, you can find the most recent version.

    You should also tell us what happens if you search for your WLAN router. The WIFI connection is displayed in network connections?

  • Satellite Pro L300 - how to turn on wireless?

    Hello

    my daughter got a new old laptop Satellite Pro L300 for 2 months. No questions then this week a wi - fi connection will not connect. Computer asks me to swich on the wireless card. When studied the wireless card does not appear on my devices and the button on the front does nothing. It worked fine for 2 months.

    Any advice?

    Concerning
    Steve

    Hello Steve

    Please check device manager again and let us know what the exact status of the WLAN card is it?
    Card WLAN registered properly or maybe with yellow question mark?

  • Pavilion DV2 1030ea - how to turn on hardware virtualization?

    Hi, the processor in my new laptop (that I've recently updated win7 for free through the free upgrade offer from HP!), but some software that I use for work only runs under XP so after installing the software "windows XP mode" from microsoft, it tells me that my hardware virtualization is disabled and must be enabled in the bios Unfortunately HP totally paralyze the phoenix bios removing all semblance of configurability and there is no option to turn it on, is what someone found out how?

    any info is much appreciated

    TIA

    OK I worked on how to do it myself, for anyone who is interested to do this first download a tool called symcmos.exe, starting back with a diskette of win98 or a freedos prepared the USB (to do and not just a windows command prompt) with symcmos.exe on the same diskette/usbstick and operating the prompt back ,

    symcmos-V2 - Lcmos - output.txt

    When it's finished restart in windows and then edit cmos - output.txt and find the line that reads

    (017D) [0000]

    and change it to show

    (017D) [0001]

    then save it as cmos - output1.txt on the disk/usbstick

    Now restart in dos with the diskette/usbstick drive and run

    symcmos-V2 - Ucmos - output1.txt

    Once it's initialization complete in windows and you will find that your hardware virtualization is now activated. Why HP in their wisdom decided to disable parts of the processors capabilities is beyond me! but there is always a way to turn these things lol.

    This mode is for a HP DV2-1030ea with F27 bios version. I may be able to help others with different laptop/bios versions so if you want your on virt material just after here

  • Qosmio G50-136 - how to turn on hardware virtualization

    Hello

    I have a Qosmio G50-136 with an Intel Core 2 Duo P8600, which is supposed to be YES to virtualization technology (intel VT - x) by intel itself ([intel | http://ark.intel.com/products/35568/Intel-Core2-Duo-Processor-P8600-3M-Cache-2_40-GHz-1066-MHz-FSB]).

    My problem is that no available through HWSetup bios settings refer to the hardware virtualization.
    So is it possible to activate it? I run mac os x 64 bit in vmware workstation.

    > My problem is that no available through HWSetup bios settings refer to the hardware virtualization.

    .and did you check the BIOS settings?
    To my knowledge, the VT can be enabled and disabled only in the BIOS.
    If these parameters is missing or not supported, you will not be able to turn the VT

  • Z230: How to turn on hardware virtualization on HP Z230

    The Hyper-V platform will not install because I have to first enable hardware virtualization. I've done it before on multiple computers. But on the new Z230 HP I just unpacked it, I can't find the setting in the BIOS.

    BIOS version v01.42 L51

    ME Version 9.1.20.1035 firmware

    He is a really strong machine. I really hope, really it has support of virtualization or I will probably have to return it.

    Hello:

    It should be within the Security menu.

    See Chapter 2, page 29 of the the service manual on the link below...

    http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=5367825&docid=emr_na-c04181341&docLocale=en_US

  • Satellite Pro L500 - How can I prevent the boxes menu popping up randomly

    How can I prevent boxes menu popping up randomly and the cursor randomly fault as well?

    It settles after a certain time, but can occur at any time.

    Hi mate

    What menu boxes do you mean exactly?
    What exactly happens with your laptop or OS?

    Please provide details.

  • Satellite Pro L500 - how to get back my internet connection

    My Wi - Fi light is off... and I can't find the switch to turn on my Wi - Fi.

    Hello

    Perhaps you need to press Fn + F8 to enable

  • Satellite Pro L500-1 t 8 - How to install Win 7 if the recovery partition is damaged

    Hello

    I have a laptop Toshiba Satellite Pro L500-1 t 8 and his hard drive was damaged, so I can't recover the special partition (I tried also with the start of 0 - key).

    I have not create a windows restore disc 7 because no one told me to do!

    I would like to reinstall my copy of windows 7 licensed slot (for now I installed ubuntu linux).
    How can I do?

    Thank you
    Fabrizio

    No way to recover a real PC Toshiba laptop? Is this true?

  • Satellite Pro A300 - How can I turn on my webcam?

    Satellite Pro A300 - How can I turn on my webcam? Operating windows 7. The computer is clean.

    Hello

    The webcam can be used with programs like Skype communication where you can make a video call. Of course, there are other messengers or programs they use the webcam.

    But you must install the software/driver webcam that you can use. This software can be downloaded from the official website of Toshiba (Camera Assistant Software):
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  • Satellite Pro L500 - stops when the power cord removed

    Toshiba Satellite Pro L500 stops when the power cord is removed even with the battery to 100%. I removed the battery and all the indications associated with battery answer correctly. For example turns off, Toshiba Health Monitor also indicates when the battery is removed. If installed Health monitor indicates that the battery is at 100%.

    Someone please help. I have not installed anything new.

    Hey,.

    For me, the matter is clear: the battery can't hold a charge so the laptop will be shut down because it has no power.

    I think you need to replace the battery with a new one and you can get a provider of service authorized in your country. Simply contact the guy and ask that they can tell you how much it would cost.

    You can find a list of all FSA here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

    Good luck! :)

  • Satellite Pro L500 - F3 - F200 - 0002 ERROR at STARTUP

    Hello

    Last night I went to reformat my laptop, to halfway through I thought no I won't do this more then I clicked Cancel. Now whenever I try to turn on my laptop, it just gives me the ERROR saying F3-F200-0002 and won't start. I tried pressing F8 at startup, but there is no option for recovery or repair in the menu mode just safe mode debugging etc.

    I was looking at forums and discovered I should press 0 constantly while the laptop boot and it will bring up recovery Wizard. Anyway, when I do this it says HARD drive recovery mode, then said Windows is loading files, then it goes to a page saying ERROR F3-FF00-0006.

    I was told to download this file (http://209.167.114.38/support/techsupport/tsbs/all/-TSB001522.htm) but I don't know how to run it on my laptop which is broken (I'm on my computer of nans for the moment). I tried to put it on a USB key and mortising the USB in, but it won't work.

    I need urgent assistance that I use my laptop for my work (I work from home, using laptop computer). We have a lot to say if you could help me fix it at home, I have no money at the moment to be able to get a recovery disk or send the computer for professionals to fix store.

    P.S. I'm on Windows7 and my laptop is a Toshiba Satellite Pro L500.

    As I know the installation of recovery should not be interrupted. If you do you not have access to the wizard of recovery more. Now, all you can do is install image recovery using recovery DVDs.

    If you have created a? Otherwise you can order under https://backupmedia.toshiba.eu/landing.aspx

    Otherwise that you can try to install the version of the OS if you have the original installation disc for Microsoft.
    You know, now the situation is quite complicated.

    By the way: in another ad with the description of the similar problem some people wrote that this error message can be caused by damaged HARD drive. I can't confirm this, but anything is possible.

  • Satellite Pro L500 keyboard does not

    My Satellite Pro L500 keyboard has sudenly stopped working, how to run other than a remote keyboard?

    > keyboard has suddenly stopped working

    You didn t post lots of details about the keyboard, but I think there could be a simple hardware malfunction that can be solved only by the replacement of internal keyboard.

  • Satellite Pro L500-1 t 5 - does not recognize battery

    My new Ii received only today) computer laptop Satellite Pro L500 does not recognize the battery. I can't turn it on without AC. When the AC is turned on, the battery LED lights up orange for 20-30 seconds and then turns off, and Windows 7 says, that there is no battery.

    I read on this forum, that I can put my battery in, while the windows is already happening and I tried, he founded the battery for 20-30 seconds and starts to load, but that she doesn't even once is not the battery. I checked the BIOS version, 1.90. It's a more later, as I understand it, isn't?

    What can I do with it? It's hardware problems and I should post in the service or can I fix it somehow?

    Hi Ponny,

    What happens if you leave the AC adapter plugged in for 24 hours or overnight and then you start the laptop without an AC/DC adapter? On the first charge, it takes a little longer until the battery is fully charged.

    If that doesn t work, you need to contact the store where you bought it or authorized service provider. In this case, you should get a new battery free.

Maybe you are looking for