Satellite Pro L300-1DI - has Bluetooth?

Similar Questions

• Satellite Pro L300 - where to get the recovery DVDs

  Hello

  Can someone help me please.

  My satellite pro L300 laptop has crashed I have repaired.
  Unfortunately, I have no operating system such as Windows Vista recovery disk.

  I can't find how to get these discs on Toshibe website or to be honest, that these disks are correctly as.

  Any help would be appreciated...

  Hello

  The laptop supports recovery of HARD drive option. This means that you can reinstall the image of Toshiba without using the recovery DVD. You must boot up the laptop and press the F8 key. The advanced boot menu is displayed and there you choose the first option to fix my computer. Then choose recovery Toshiba (last option) and start the installation.

  After this installation, you can use the Toshiba pre-installed called TOSHIBA Recovery Disc Creator to create an own recovery DVDs software of engraving

  But if you have formatted the HARD drive, the repair option won't work because the recovery folder has also been removed. In this case, you will not be abele to create clean restore DVD.

  But you can order it here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Satellite Pro L300 - WiFi feature has been removed

  Hi, I'm not a technique very girlie, so bear with me please :_)

  Yesterday, I received Virginmedia modem & wireless router connected. The guy on the left until I'm online but when I tried, I found that my Satellite Pro L300 wireless function has been deleted. I tried to use the rescue disk, but I get an error message saying "ACPI ATK0100 Kernel Mode Driver' absent." I can't even connect to the internet with an ethernet cable & when I checked the Windows my laptop's side went from 3.1 to 1.0!

  Is that what I can do to correct this situation myself or should I leave in a repair shop?

  It is indeed very frustrating.
  All responses are warmly appreciated .x

  Boarder's right. At first check if the LAN and WLAN cards are installed properly.
  Go to control panel > system > on the left side, click on Device Manager and check the entries under network adapters.

  Please report the status.

• Satellite Pro L300 - USB card reader does not support the 64 GB

  HI I have a Satellite Pro L300 under Win XP that I want to attach a USB card reader. I find that I can not read the 64 GB cards. The error is that the card is not formatted. All other cards read correctly. I can place this card reader in my desktop running Win 10 and it works correctly and reads the 64 GB cards. This seems to indicate that the USB card reader works properly, and perhaps that the problem lies in the USB on the Toshiba drivers. Has anyone else had this problem and found a fix for this. I've just updated the BIOS but no improvement. Thank you

  Posted by Trees
  

  HI I have a Satellite Pro L300 under Win XP that I want to attach a USB card reader. I find that I can not read the 64 GB cards. The error is that the card is not formatted. All other cards read correctly. I can place this card reader in my desktop running Win 10 and it works correctly and reads the 64 GB cards. This seems to indicate that the USB card reader works properly, and perhaps that the problem lies in the USB on the Toshiba drivers. Has anyone else had this problem and found a fix for this. I've just updated the BIOS but no improvement. Thank you

  Hi, here is a link to not detected by the PC card reader:
  http://KB.SanDisk.com/app/answers/de...CTED-by-the-PC
  You can take a look, hope it will be useful to you.

• Satellite Pro L300 - cursor black screen flashing

  Hi all

  I have a Toshiba laptop Satellite Pro L300 Vista.

  The customer earned him in because when it starts it goes to home Toshiba screen then goes to a black screen with cursor flashing at the top left. I connected external monitor with the same result. Swapped RAM as well.

  Have run Memtest (spent), Seagate HDD long test (past), Ultimate boot CD and Winternals without success.
  * F8 does not work * and no more than the resumption of the plant.

  Can enter the BIOS F2 and F12 no problems and the HARD drive is listed.

  I reinstalled Vista on CD and on reboot it goes back to blinking cursor. I tried booting from the Vista CD repair and system restore. FixBoot commands and FixMbr prompt as well as with the same result.
  I feel that it may be a corrupt CMOS sensor? It's like the OS installs correctly, but the computer loses his memory on reboot where the operating system?

  Is the battery CMOS easily accessible and removable on this model?

  Has anyone experienced these symptoms? Is - fixable at lower cost?

  Hello

  If you have clients, I guess you're a technician and hope you have a few pieces of equipment in your store.
  Have you tried to set the BIOS to default settings and check again?
  If possible try to exchange the HARD drive and test the functionality again.
  You can use laptop with Linux live CD (HARD drive not required)?

  To be honest that I think n problem t is ORGANIC and, in my opinion, the exchange of the CMOS battery is not necessary.

  Please test it with the new HARD drive and post comments.

• Satellite Pro L300 - required external power supply (power car)

  Hi all

  I have a Toshiba Satellite Pro L300 and want to plug it into my car supply.
  The battery is 10.7 volts and the charger is 19 volts. I do not think that plug into the car is causing a problem, but there is no mention of this in the manual.

  Has anyone tried this and it worked great.
  I didn't wan't to recharge the battery just to be able to run the laptop for more than the battery allows.

  Hello

  You need a car adapter to connect the laptop to the 12V car

  Looking in google for adapter cigarette lighter for Satellite Pro L300?
  To do this, and you'll get some hits

  Otherwise, you can order this part of the Toshiba authorized service partner in your country.

• Satellite Pro L300 shows ACPI ATK0100 Kernel Mode Driver error

  I have a Satellite Pro L300 with Windows Vista and it has been fickle to say the least, making me restart the system several times.
  The last two times she since continued to come up with an error message saying "cannot open ACPI ATK0100 Kernel Mode Driver", and I understand that it is perhaps what is originally that there problems later.

  I tried updating the BIOS, reinstall the drivers and, seeking answers and, of course, reinstall the whole system, but I still get this message every time I turn on my laptop and I really don't want that it gives me the blue screen of death again - please help me!

  Thank you.

  Stand by.

  You ve done clean install of Vista with initial recovery DVDs and you get this error in any case (no additional software is installed)?

• Satellite Pro L300 - network adapter failure

  I was running my Satellite Pro L300 on a Belkin router connected to my DELL desktopsuccessfully wireless, except that sometimes the adapter on the Satellite failed and I had to restart the portable computer to restart.

  The other day I decided to reinstall windows XP on my desktop, because he soon grindingly.
  All worlks OK and I can access the internet from the desktop and my laptop is picking up the signal from the router but will not let me connect.

  The network shows under available networks, but when I try to connect it says "windows could nto connect to the WLAN.
  The network icon has a red line through it. I updated the driver and according to copntrol Panel operation.

  Am posting this from my office

  Hello

  Try this;
  -Start the console (in run, type CMD)
  -In the DOS window type; ipconfig / renew

  This should renew all your network cards and must assign the IP again.

  Using the ipconfig command, check if the wireless adapter is listed in the list.

• Satellite Pro L300-1AF fails to start

  I have a Toshiba Satellite Pro L300-1AF that won't start, it stopped working a few weeks ago and I tried startup repair and things, and nothing seemed to work just kept loading a black screen with a cursor but nothing else. After a little more research, I found out how to restore to factory settings holding the 0 key etc. when I tried this he got 54% then the screen everything went black and now it used to boot. It happens with just:

  -Unable to start windows. a recent hardware or software change might be the cause.

  file:\Windows\system32\winload.exe
  status: 0xc000000e
  Info: the selected entry could not be loaded because the application is missing or damaged.

  He also says to insert your installation disc, but I have not one when I bought it.

  -What this means and how can I solve this problem? I tried the factory restore and just make it even worse.

  Any help or advice would be much appreciated

  Hello
  > He also says to insert your installation disc, but I have not one when I bought it.
  That's your first problem. This model laptop was delivered without disc recovery but the preinstalled software that allows you to create a recovery media. All this is clearly described in the document s user manuals.
  Now, your original Vista operating system has disappeared. On this path virtual I can't say with certainty what the problem is, but somehow, I think the HARD drive's troublemaker.

  What to do now? First you need the Windows installation for the installation of the OS disc. Original Vista may not be used more so my advice to you is to get the Win7 32 bit install disc and try to install it on your machine. Win7 is entirely compatible, so there is no problem to install all the necessary drivers, tools and utilities.

  By default the BIOS settings and try to install Win7. If the same problem recurs and Setup will stop I m afraid HARD drive is defective. If possible, try to get another HDD for testing purposes.

  You know you have to play a bit with your machine now and find out what the problem is.

• Satellite Pro L300 - commissioned only in safe mode

  Hay, my Satellite Pro L300 computer can be started in SafeMode only because if I start it normally it access to the desktop and then freezers.

  Can someone help with this problem?

  Hey Buddy,

  If the computer starts only in safe mode, this means that something has confused the OS

  Since when have you noticed the problem?
  No doubt it can help you to restore the system to a previous point. If it doesn t help your only option seems to be to reinstall Windows I think. Therefore, you can use the Toshiba Recovery drivers with tools disk :)

• Satellite Pro L300 does not illuminate

  Hi all, I'm new to this forum.

  I have a Toshiba Satellite Pro L300 and I've had it for about 2 years.
  But yesterday I closed the laptop as usual. But later I went back to it and tried to turn it on. But it does not work. Instead, when I press the power button the LED next to the battery symbol flashes orange/orange 6 times and then turns off.

  Can someone tell me what it is? I tried to let it load, but that has not worked. The amber light is the only light that flashes. It does not recognize that I plugged in the charger and I don't think that the battery was flat. So I'm angry and helpless right now.

  Can someone help me please?

  See you soon.

  Hello

  There are several indicators;
  DC, while running, the main battery, LED HDD/ODD.
  So I guess the power LED flashes in orange. Right?
  This means that something was wrong on the motherboard.
  Maybe power supply electronic malfunctions

  In this case, there is no much to do only mobo replacement could help to...

• BSOD on Satellite Pro L300

  Hello world

  I've been using my * 28W Satellite Pro L300 * since 2 years now, and since the last summer he ain't no fun.

  The laptop suffers * BSOD * one after one, making the job impossible. BlueScreenView, it is especially halmacpi.dll who is responsible, and the error code is * 0 x 124 *, which is for material that I know.

  I've tried everything described on various forums, including virus and rootkit search, updated all drivers and BIOS, checked the base with SpeedFan temperature - everything seems OK, but always reappears the BSOD. I have nothing overclocked, running Windows 7 32 bit with all latest updates.

  There is no BSOD when booting in safe mode. If anyone has some thoughts on this, I'll be happy to see them!

  Hello

  Have you tested the mobile functionality with clean operating system preinstalled (original toshiba recovery image)?

• Satellite Pro L300: x 3100 and updated updated driver chipset Intel 965 graphics

  Has anyone installed the Intel 7.15.10.1666 driver, dated 02/26/2009 for the Mobile 965 chipset? Here is their web page to download:

  http://www.Intel.com/support/graphics/intelgm965/

  Toshiba Satellite Pro L300 doesn't work for some reason unknown to me, with the automatic update driver Intel (download containing the executable file). Therefore, I followed the instructions for manual installation (the download with the zip file).

  My laptop works fine with this new driver, and there is a clear improvement in the transitions between images when you use the option to Windows presentation (slideshow).

  This new driver installs also 3 Intel graphics programs:
  For the management of the display function keys
  Access to the system tray
  Wizard TV

  I used Windows Defender to remove these 3 programs that load automatically at startup of the system to maintain a fast startup time and not loading unnecessary programs in memory. There is no me no problem.

  Why Toshiba has added that this to the driver download page?

  Hello

  Thanks for this second info...

  > Why Toshiba has added that this to the driver download page?
  Who knows maybe it has not been verified, approved and tested by Toshiba?

  As far as I know every phone manufacturers test and approve drivers before they will be released in the pages of pilot
  Perhaps, it has not been approved...

  However, it s good new that this driver works correctly.
  I'll check it too on my laptop.

  See you soon

• Satellite Pro L300 - touchpad does not work

  Hi all that I need help urgent because it drives me crazy. First of all, I use XP PRO. My laptop is fairly new, only around the age of 4 months, I had no problem with it at all. I formatted my laptop yesterday and reinstalled all the drivers that I downloaded here:

  http://www.ISD.Toshiba.com.au

  and everything works fine except the touchpad. I have already installed shared, utilitarian toggle the touchpad Module and I have the latest BIOS installed and reset all default settings and I made sure that the touchpad is enabled in the BIOS, but also pressing FN + F9 to enable during Windows.

  I installed the latest touchpad driver Synpatics I downloaded from the homepage of Synaptics. But for some reason any, that it does not work, I don't know what is the problem here. My touchpad worked before I formatted my laptop, it worked fine and has never had any problems. Will you please tell me what is wrong because I need to use my touchpad sometimes as well, so I can't use a mouse all the time.

  Hello

  > I installed the latest Synaptics touchpad driver that I downloaded from the home page of Synaptics
  I think that you question refers simply to the driver for the touchpad that is missing or incorrect.
  I put t know how it works on Toshiba notebook Australian, but the Toshiba European Satellite Pro L300 units needs touchpad different drivers. some use the Toshiba touchpad driver and some units need a driver for the Synaptics touchpad.

  In your case, I recommend this controlled again.

  By the way; My touchpad is always disabled so that en external mouse is connected.
  It is parameters that control it. Please check in your touchpad properties too!

• Need driver SATA XP for Satellite Pro L300

  Hello

  I have a Satellite Pro L300 Vista.
  If I have problems of major incompatibility with Vista I can swap the readers so I want to set up a second hard drive running on XP Pro.

  When I try to set up the XP he sees not the SATA hard drive. I know that it's because XP does not contain the SATA drivers. Couple of questions

  (1) I saw a comment that recommendsto change the BIOS for SATA setting to "Compatibility" and this should work. I tried this but did not find it worked - everyone find it works?

  (2) where can I find the XP SATA driver? I crossed the XP drivers for Satellite Pro L300 Toshiba's web site, but could not see any SATA driver.

  Thank you

  Hello

  As to the question;

  (1) some notebook models containing this function in the BIOS and some don t BIOS that SATA option. If the BIOS has this option, you should be able to put AHCI Compatible mode. Then a SATA driver won't be necessary but also your SATA function would be disabled and HARD drive might work more slowly. So I recommend to set to AHCI, and then reinstall the SATA driver.

  (2) the SATA driver is part of the Intel Matrix Storage Manger. You can include the SATA drivers using nLite software. The necessary files of the SATA driver can be downloaded from Intel here page:
  [32-bit (201ko) floppy Configuration utility 8.6.0.1007 | http://downloadcenter.intel.com/download.aspx?url=/17061/eng/f6flpy3286.zip&DwnldId=17061&ProductID=2101&lang=e ng]