WINDOWS 8.1 NO DRIVER AVAILABLE.

Similar Questions

• My camera SonyDSC-S85 will not connect to windows 7 said no driver available, why go to this if it does not support my equipment

  My Sony DSC - S85 will not connect to windows 7. He said no driver is available I can't believe what is happening simply because do upgrades of windows I yo buy all new appliances and video equipment.

  You're right - the site of Sony says that your camera is not supported under Windows 32 or 64-Bit 7. However there is a simple solution - take the memory stick in and out of the camera and a card reader allows you to transfer your photos to your PC.

  If your PC does not have a card reader, you can buy USB very cheap ones. Just make sure it's one that can read the memory stick into your camera.

• HP1280 driver for windows 7 - is a printer available or compatible?

  HP1280 driver for windows 7 - is a printer available or compatible?

  I have had no luck with 1220 series.

  Hi Cchriso,

  You should be able to use the Windows Vista drivers for the 1280. I don't know if you have 32 bit or 64 bit, then here is a link to both:

  Drivers Vista 32 bits for the HP Deskjet 1280

  Drivers Vista 64 bit for the HP Deskjet 1280

  For more information, see this thread:

  http://h30434.www3.HP.com/T5/other-printing-questions/Windows-7-64bit-driver-for-HP-1280-DeskJet/TD-p/567129/page/2

• Installation scanner/printer HP Photosmart 5510d series has no driver available for Windows 7

  I have a new HP photosmart 5510d scanner/printer (wireless). I installed it via the CD, but cannot send anything from the PC to the printer. Nor the radio available, I have it on my devices, but it is said that he needs help desk, when I do this it tells me that I need a driver, when I check for a driver, told me that there is not one for the 5510d. I can scan/printing without PC but hold the hooked up wireless and PC. What can I do?

  Hello

  I'm sorry to hear that the problem with the installation of HP printer driver. It seems to be a compatibility issue with Windows 7.

  Let us try the following methods; I'm sure this will help you to solve the problem.

  Method 1:

  Try the steps in the following Microsoft article.

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  Try to uninstall then reinstall the printer drivers.

  Find and install printer drivers in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Method 3:

  Try installing the printer in Windows Vista compatibility mode driver

  Make older programs run in this version of Windows:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  For more information, see the following Microsoft support article.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Please reply with the status of the issue, so that we can better help you.

• DeskJet 8000 wireless A809n: 10 Windows based printer deskjet driver 8000 wireless A809n

  Is there a Windows basic 10 for the deskjet printer print driver 8000 wireless A809n?

  Receive this private message after posting on the HP Facebook site (but maybe it's a coincidence...?)

  > > > > > > > > > > > > > > > > >

  Hi @stephen_ford,.

  Thanks for joining the Forums of HP Support with your pilot's request.

  I understand that you were wndering if there is a basic print driver available for the printer HP Officejet Pro 8000 - compatible with Windows 10 A809 series. I would like to help.

  I don't see the basis for this model drivers. The only software and driver available for download is the software HP Officejet full feature and the driver. You can go to the software and the drivers download page by clicking here.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

  ====================================================

  What I have not said in my question, it is that I welcomed the HP Support Assistant help with installing the driver. The installation has started and then fell in a heap. He seemed to gather a set of diagnosics and send it's out of HP and that was the last I heard. I don't know what caused what. HPSA maybe even helped to reduce collateral damage, I don't know, but what I know is that between HP and Microsoft...

  NOBODY TOLD ME THAT INSTALLING WINDOWS 10 COULD STOP MY PRINTER WORKS...!

  And installation has been fairly stable at best. At worst, it was a traumatic experience because of my PC to my work...

  So this morning I decided to try again and began the installation of the printer driver entirely embodied by choosing down, load the file only without the help of HPSA.

  When the installation began, I discovered that apps in fully embodied installation could be deselected (I did with joy... ).

  From there the wireless installation proceeded easily according to the driver installation only Win7...

  Ahhhh... happiness... :-)

• Windows 8 X220T video driver

  Is there a reason why the Win 8 beta graphics driver intel is available for almost all models except X 220 series?

  I realize that there are drivers available through Windows update, but I'm not sure that they have the full range of features such as the Lenovo one. Some programs such as the State of Karl as the newest driver available via Windows update do not meet requirements (possibly Open GL associated).

  Thank you

  -bb

  Sorry to bump my post, but I solved my problem with alternative measures.

  Intel has dropped the ball on this one by pushing insufficient drivers to Windows update, you must disable self-install at will and manually select drivers that work better. People are hacking drivers Lenovo beta for all kinds of manufacturer who use chart of Sandy Bridge, but I found that they have problems as well.

  Fortunately Microsoft has been kind enough to include working for us, as long as you dig through and find them in the list.

• Link-5 dongle no driver available for Win 7 Pro 64-bit

  Bought an Elite v2 Wireless keyboard that comes with a dongle to Link-5.

  The keyboard is listed as compatible with Win XP, 7, Vista, 8. But when the link-5 dongle is connected to my EliteBook 8470w windows reports that could not be not installed, no driver available. It appears in the device under 'Other devices' Manager with a warning icon.

  The product help said that no driver is necessary. The laptop is fully patched and running Windows 7 Pro and clearly needs a driver. I have confirmed that all the elements in the keyboard and HID a current drivers Device Manager, but still the dongle is not installed.

  Finally reinstalled all Drivers USB Intel and the keyboard has been recognized.

• Canon CanoScan 8400F. No driver available.

  No driver available. Is there an updated driver for this device?

  Moved from feedback

  Original title: Canon CanoScan 8400F

  Hi Barbara Donaldson,.

  1. Which is exactly the problem that you are facing with CanoScan 8400F?
  2. What operating system is installed on the computer?

  CanoScan 8400F drivers are available for Windows go to this link.

  After the back if you have any questions.

• Windows 7 SATA storage driver hp pavilion dv6

  Hello

  I recently bought a new drive hard and continuously an error message when I try to install the software for it. This is the exact number, I have: http://wdc.custhelp.com/app/answers/detail/a_id/11713

  I confirmed that the BIOS is locked in AHCI on my laptop model, so the solution is to upgrade the storage SATA driver to the latest Microsoft native driver, but I don't know how to do this. The only driver available on my system is "Intel(r) ICH8M-E/ICH9M-E SATA RAID Controller '.

  Help, please!

  ~ Gorkycreator

  Operating system: Windows 7 Home Premium 64-bit (installation costs)

  Laptop model: HP Pavilion dv6t-7000 CTO Entertainment Notebook PC

  Hard disk: Western Digital Black2 Dual Drive

  Error: Unsupported storage SATA driver / Incompatible

  Driver update: Intel(r) ICH8M-E/ICH9M-E SATA RAID Controller

  Hello:

  Dv6t-7000 has Intel & chipset series and uses the Intel (r) 7 Series Chipset Family SATA AHCI Controller.

  If in RAID mode, it uses the controller Intel (r) Mobile Express Chipset SATA RAID.

  If you try to install W7, please try this...

  Download the drivers from this link below (first or second file listed - 32 or 64 bit depending on the case).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=23060&keyword=Intel+RAPI...

  Extract the files on a usb flash drive.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and hopefully, W7 should install.

• Audio loss. UAA Bus Driver reads Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39). All the patches?

  Audio loss.  Device Manager indicates Microsoft UAA Bus Driver as: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ».  Tried to update driver and restore without success.  Tried the program of "Fix - It", which has identified an error with the sound system, but said that he could not fix it.  Restored to an earlier date but still what system did not go.  Tried to uninstall and reinstall the driver.  Uninstall was successful but reinstall it read that the hdaubus file does not exist.  I'm a computer dunce.  Any help out there?

  Hi BarbaraWolfe,
   

  There are many causes of Code 39 errors:

  • A required device driver is missing.
  • A required binary file is corrupted.
  • There is a problem with the file I/O process.
  • A driver that refers to an entry point in another binary file cannot load.
  Re-install the driver by downloading it from the link given:
   
  Universal Audio Architecture (UAA) High Definition Audio class driver version 1. 0a available for Windows XP, Windows Server 2003, and Windows 2000
  Additional reference on:

  Explanation of error codes generated by Device Manager in Windows XP Professional

  Check if that helps.

• Linksys USB200m Windows 7 64 bit driver?

  Hi all

  Does anyone have information on a 64-bit of Windows 7 for the Linksys USB200M USB network card driver? I have three of them that I use between different systems and had no luck at all making it work with the new OS.

  I would also gladly replace the adapters with the USB300M, but I'm worried about the same question; News on Windows 7 as well supported on that?

  Any help would be appreciated!

  Jason

  Skanny,

  Thank you very much! I looked at market for months, but never found the chipset the USB200M using actually. This reference driver works perfectly. Too bad the manufacturer of the chipset have this driver available for almost a year and Linksys has not yet published a.

  Good for everyone: the chipset is a 6 AX88772A. You will need to manually, choose from a list the installation and choose this chipset. Download Driver:

  http://www.asix.com.tw/products.php?op=pItemdetail&PItemID=97;71;101&PLine=71

  Thank you once again Skanny,

  twillux

• SE error message: "Windows cannot load the driver for this hardware device. The unit may be damaged or missing. "When you try to install new drivers for DVD players

  Original title: CD/DVD drives do not work after upgrade from XP to Vista

  I upgraded my dell E521 to Vista dimension, but now finds that none of the CD/DVD drives work.  I also tried two external drives, same thing.  I downloaded the new drivers for the internal disks and when I tried to install the windows said they already had the best drivers.  Both drives are TSST - I get device status "windows cannot load the driver for this hardware device. The unit may be damaged or missing. "I want to upgrade to 7, but can not run the dvd, and apparently MS has no download available if you purchase cd!  Am tearing my hair!

  Hi krt2,

  In general, the error can be caused by a missing required device driver, a required binary file is damaged, if there is a problem with the process I/O file, or if a pilot that makes reference to an entry point in another binary file which can not load

  You can try to uninstall and reinstall the driver for the device to solve this problem.

  Step 1: Uninstall the CD/DVD driver. Follow this step to do the same thing:

  a. click the Start button, select Control Panel, click System and Maintenance and then click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. expand CD-ROM/DVD-Rom drives-> right click on the device, and then click Properties.

  c. on the device properties dialog box, click the driver tab, and then click on uninstall.

  d. restart your computer.

  Step 2: Reinstall the CD/DVD driver by visiting the manufacturer's Web site.

  See the links below for more details on the update of drivers:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Also, read the following article and check if that helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• H8 - 1520t: how to do a clean install of windows 10 on another drive?

  Hi all.

  Today, I decided to make the transition to windows 10. I want to do a clean install, however, because I recently had an SSD and install the OS on it instead of on my hard drive. First of all, I even need my product key to do a clean install on a new drive? I made a clone of my C: dirve just in case something goes wrong, cordially. My SSD is 100% empty and has 110GB available on this subject, but my main hard drive has about 400 GB of stuff on it, so cloning my drive for the SSD drive is out of the picture.

  So basically what I want to know is this: 1. do I need to have my windows key to do a clean install of windows 10 8.1 of windows on a different drive.

  2 if not, how to do a clean install on a new drive

  3. If I need, how can I get it?

  Thank you all

  The simplest solution would be to save the data that you want to keep on an external hard drive, then remove this data and programs from the old hard drive so that only the BONE remains.  From there use migration software from your manufacturer SSD to clone the old drive to the new SSD using a USB to SATA.

  The Windows key is embedded in the BIOS and will be recognized by the computer on any installs.  It would be desirable to collect your key, just in case, using Belarc Advisor, which gives you all kinds of info on your computer.  Do this before doing anything.

  http://www.Belarc.com/free_download.html

  Share your drive and be sure that it is operational.  Now you can perform a new installation of the upgrade of Windows 10 using an ISO bootable.  See step 5 or 6 of this tutorial:

  http://www.tenforums.com/tutorials/2267-Windows-10-upgrade-installation.html#step3

• Relocation of 7 home 64 bit by usb. Windows Setup needs a driver. message reads (a required CD/DVD drive device driver is missing).

  54i have a computer laptop m18x by Mei alineware reinstall 7 home 64 bit by usb. Windows Setup needs a driver. message reads (a required CD/DVD drive device driver is missing.) funny iam not to use a cd or a dvd. IAM using a USB flash drive. weird. If anyone can help.  Thank you wberlin

  Probably the installation media itself is corrupt. If your Alienware is preinstalled with Windows 7, then you should be able to reinstall using the recovery partition:

  New computers that come pre-installed with Windows often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  To restore the image while preserving the data files:
  Turn off your computer.1.
  Disconnect all devices connected to the computer (such as USB key, 2 printer and so forth) and remove any recently added hardware in-house. NOTE: Do not unplug the AC adapter cable.
  Turn on your ordinateur.3.
  When the Alienware logo appears, press several times to access the 4. Advanced Boot Options window. NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop; then, shut down your computer and try again.
  Select 5. Repair your computer.
  Select 6. AlienRespawn and backup emergency in the System Recovery Options menu and follow the instructions on the screen. NOTE: The restore process may take an hour or more depending on the size of the data to be restored. NOTE: For more information on AlienRespawn, see article 353560 at support.Dell.com knowledge base.

  Source:

  http://support.Dell.com/support/eDOCS/systems/M18x/en/mm/MM_en.PDF

  If the recovery partition does not work:

  Step 1: Download a copy of Windows 7:

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  Step 2: Perform a custom installation, see Windows 7 section of the following article how to perform a custom installation:

  How to: perform a customized Windows installation

  Step 3:

  http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

• Mad Catz Pro game controller, no driver available

  There is no driver available. When connected it simply says that it cannot find a driver i Windows 7 Pro 64-bit

  If this is the Xbox 360 compatible controller, unplug it, download the driver MS here (choose your OS before download):
   http://www.Microsoft.com/hardware/en-us/p/Xbox-360-controller-for-Windows#support

  Install this driver, then plug your Mad Catz. Windows will then detect as a compatible controller Xbox 360 (or at least it did on both Win7 and a Vista machines I have).

  SC Tom