Satellite Pro L360-14F - which is the sleep-touch external keyboard?

Similar Questions

• Satellite Pro L360-14F - cannot play videos on the external monitor

  Toshiba Satellite Pro L360-14F
  Video files as avi, flv, mp4 are played with SM-player etc on the screen of the laptop, but not on the external monitor attached.
  A newspaper there is the error message: MPlayer crashed by the bath OF CPU/FPU/RAM usage.

  Which may mean that?

  You already go to the external display by using the FN + F5 keys?
  To do this.

  In addition, you must go first to the external screen and then you need to start the windows media player or other video player.

  I advise to use the VLC Player. It s free fro and plays most of the files

• Satellite Pro L300: How to get the sleep settings

  Before you have to play with the Satellite Pro L300 laptop recently (on the instructions of the Tech) when I close the lid of the laptop that he went to sleep BUT when I opened the lid eventually, I had to press the power button to restart the laptop.

  But now, he's just on stand by.
  How can I get this back to how it was (having to press the button to exit stnd - in)-help!

  I tried to turn off Toshiba power saver and using the windows settings but nothing
  I have treid working :(

  Can anyone help?

  I get at the end of my home with this computer laptop blinkin :(

• Satellite Pro 6100 does not recognize the single battery external power

  Whenever I have start Satellite Pro 6100 Win XP Pro with standard battery mounted and connected to the power supply computer laptop does not recognize the ext battery supply single supply and during 'start-up' goes into hibernation.

  By pressing the power on button laptops "wake up" and indicate that the battery is empty or may not even decide when completely loaded, then says connect the station even if still connected, looking under Toshiba console when it runs shows running on battery when still in the power of the ext?

  I have two batteries and both give the above symptoms even when I remove ext of laptop power always runs with power supply by battery but no light orange or green for battery.
  Any ideas?
  Concerning
  Phil

  Hello

  Is your AC adapter malfunctions or there is something wrong with the power supply to electronic s laptop.
  In the first case you could purchase a new compatible AC adapter and could check if the laptop can run successfully.
  The second possibility is a serious hardware problem, but in this case, the laptop must be checked by an authorized technician.

• Satellite Pro A100 - can I exchange the CPU?

  Hello world

  I have a Satellite Pro A100-198 with a core duo processor. I would like to replace the processor of a Satellite Pro A100 830, which is Core2Duo in the Pro A100-198. They both have the same chipset-expected-they be any problem with that? This would increase the clock speed of 1.66 GHz to 2.0 GHz. They all have two Intel 945 PM Express chipset.

  I just upgraded from XP to Windows 7 32 bit and the performance score is 3.4. My BIOS version is 1.9 and I see there is an upgrade to win all the version 6, but I can't find the BIOS version history - it is better to upgrade. For the moment, I'll see if there are problems.

  Thanks in advance Mick

  Post edited by: mdfcv

  Hi Mick,

  As far as I know the two books belongs to the PSAACE series. Can you confirm this? You can find this information on the underside of the laptop.

  Normally if the books belong to the same series, it should be possible to exchange the CPU. They use the same hardware, so you can exchange.

  But don t forget this isn't supported CPU upgrade. If you have the warranty you will lose it. Other s CPU are pre-tested not on your laptop.

• Re: Satellite Pro A200 - black screen after the BIOS screen

  Hello
  I'm new to the forum and have a big problem. So, any help is welcome and appreciated.

  My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor. Also just as the screen goes black a beep can be heard which shows windows boot.
  I can access the toshiba Setup screen but not the installation of security mode.

  Kind regards

  Hello

  You wrote that you can access the BIOS, but have you checked if the HARD drive is recognized properly? Perhaps because the computer cannot start HDD isn't recognized then you should check this.

  If the HARD drive is recognized, I would try a Toshiba Recovery disk recovery facility. It seems that Windows isn't able to start and if you reinstall the whole system should help get rid me of this. Go to the start menu and select the CD/DVD drive as a boot device.

  Check this box!

• Satellite Pro L40 - how to enable the WLan using ConfigFree

  Can you help me?

  My English is bad I do not end.

  The question is:
  My computer is a Toshiba Satellite Pro L40 and I use the ConfigFree for the wireless, but it seems that the WiFi network is disabled.

  Help please!
  I want to know what's wrong

  Thank you!!

  Hello!

  Your wireless network card is recognized correctly in the Device Manager, or you may notice a yellow exclamation?
  Her check first because otherwise, you can get the WLAN to work.

  In addition, you can activate WLAN with the material on the laptop switch which must be set on and the FN + F8 key combination.
  Check it!

  After this Free Config should find your WLAN router if you are in the range of that.

  Good bye

• Satellite Pro A300 - upgrade RAM of the former model A200

  Hello

  I need an advice. I just took a memory (Samsung) 1 GB of more old model Satellite A200 module and put it on my new model Satellite Pro A300. Here is the information about the SPD:

  _Original (which has been installed in the factory): _

  DIMM1: Kingston (2 GB DDR2-667 DDR2 SDRAM)
  Manufacture Date week 20 / 2009
  @ 333 MHz 5-5-5-15 (CL-RCD-RP-RAS) / 20-43-3-5-3-3 (RC-RFC-RRD-WR-WTR-RTP)
  @ 266 MHz 4-4-4-12 (CL-RCD-RP-RAS) / 16-34-2-4-2-2 (RC-RFC-RRD-WR-WTR-RTP)
  @ 200 MHz 3-3-3-9 (CL-RCD-RP-RAS) / 12-26-2-3-2-2 (RC-RFC-RRD-WR-WTR-RTP)

  _From old Toshiba Satellite A200: _

  DIMM3: Samsung M4 70T2953EZ3-CE6
  Manufacture Date week 42 / 2007
  @ 333 MHz 5-5-5-15 (CL-RCD-RP-RAS) / 20-35-3-5-3-3 (RC-RFC-RRD-WR-WTR-RTP)
  @ 266 MHz 4-4-4-12 (CL-RCD-RP-RAS) / 16-28-2-4-2-2 (RC-RFC-RRD-WR-WTR-RTP)
  @ 200 MHz 3-3-3-9 (CL-RCD-RP-RAS) / 12-21-2-3-2-2 (RC-RFC-RRD-WR-WTR-RTP)

  According to the information provided was it a good or bad idea? I mean differences in the SPD and will this performance, stability, etc. ?

  Thanks a lot for your time!

  Hi xosman,

  According to the information that you have posted it seems that the other Satellite A200 module has the same specifications, so if your laptop works with this module it s no problem I think.

  Satellite A200 A300 using the same memory modules DDR2 so change the RAM is no problem.

• Satellite Pro A300 freezes when on the internet

  Satellite Pro A300 freezes when on the internet & the only way to turn it off is to take out the battery. Bought new Dec 2010 & is under warranty - suggestions?

  Hello

  have you tried to update drivers Lan (wlan)? What browser do you use? I guess, the Internet explorer, try firefox or opera. Also, your computer may be infected with the virus, or blocked by the firewall. Have you installed software before it starts? Is this ok when you bought it? I ask you too, because you do not have a lot of information.
  It is especially the driver, software problem.

• Satellite Pro 4200 how to avoid the mistakes of the ACPI

  Satellite Pro 4200 how to avoid the ACPI errors after installing SP2 for windows XP Prof
  The problem is that my computer after installation service Pack 2 need about 15 minutes from time of shoutdown - what should I do to avoid this problem.
  Piotr Plecke

  Hello
  in this case it would be interesting what Type of laptop it is exactly.

  You will find this model on the bottom of your laptop. There is a review of it.

  Some models have a Bios update available, others not, for example.

  Please send additional information!

  Good bye

• Satellite Pro 4600: where to find the drivers

  Where to find drivers for Toshiba Satellite Pro 4600 drivers?
  We cannot choose this model in the support page...

  The drivers for this laptop Satellite Pro 4600 series are on the European driver Toshiba page.

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  The laptop seems to be an oldie and therefore you should take a look in the _ * Archives * _ folder!

  Best regards

• Satellite Pro U400: How to configure the VLAN for the Marvell Yukon LAN control.

  Hi all
  I need to access the 2 VLANS with the controller LAN Marvell Yukon 88E8072 for my Satellite Pro U400. I installed the necessary Configuration utility network Marvell tell me after installation, VIRTUAL local network settings must be mounted in the Device Manager (Windows 7, right click on computer, properties, click device/network management adapters/double on Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller), I can't find a thing to configure here but wake-on-LAN.

  Any suggestion? Thank you!

  Michael

  Hello

  I think that in this case, you can use a network switch.

• Satellite Pro A200 - how to activate the new device LAN card?

  Hello.

  I have a Satellite Pro A200 and I replaced the card with an Intel 5100 (512AN_MMW) wireless and it detects OK and installs the drivers etc, but it does not work because he says that the switch is turned off on the front of the laptop. The switch is on I also tried pressing fn + f8, but it still does not work.

  The laptop is running Windows 7 64 bit

  Kind regards.

  Hi evo8.

  What card WLAN have you had before and do the work of a former?
  I think that it of difficult to say why it doesn t work but maybe this card is not compatible.

  By the way: do other FN keys FN + F8 work or simply not?

• Satellite Pro L670 - 16Z BSOD after start and an external monitor

  Hello!

  I have a strange problem with two Satellite Pro L670-16Z. I connected to an external monitor. After changing the settings to extend the windows desktop, I rebooted the system.
  Then I gott a blue screen. I disconnected the screen external, nut, this is not enough. The system does not start. I always get a blue screen.
  Systems running Windows XP. I have this with both of them with different external monitors.
  I can boot a BartPe. I did correct the systems yet. The systems are very cool, works only for 14 days.

  Any suggestions?

  Concerning

  Stephan

  Are you using the original recovery image Toshiba WXP?
  Can you start Windows XP Home edition in safe mode?

  The port on which you are using to connect the external monitor?

• Satellite Pro A300 PSAJ1E wake up to sleep properly

  I have a new Toshiba Satellite Pro A300 / PSAJ1E - 018006EN problems similar too.
  When the mine goes into sleep mode it re - will not start unless the power button "many" times, finally it lights, but in safe mode and everything which was being developed is lost.

  Hello

  I've read about similar problems, especially the screen remained empty after entry into standby or hibernation mode

  This could be resolved by updating the BIOS with the latest version available and by updating the operating system.

  Please do this first