Satellite Pro L750 running Windows 8 pro - error STOP devices & Printers.

Similar Questions

• need drivers pci for toshiba satellite M45-S2653 running windows xp pro 2002 SP2

  need drivers pci for toshiba satellite M45-S2653 running windows xp pro 2002 SP2

  Find it here:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=product%20Support

  Good luck.

• Satellite Pro L500 - stops when the power cord removed

  Toshiba Satellite Pro L500 stops when the power cord is removed even with the battery to 100%. I removed the battery and all the indications associated with battery answer correctly. For example turns off, Toshiba Health Monitor also indicates when the battery is removed. If installed Health monitor indicates that the battery is at 100%.

  Someone please help. I have not installed anything new.

  Hey,.

  For me, the matter is clear: the battery can't hold a charge so the laptop will be shut down because it has no power.

  I think you need to replace the battery with a new one and you can get a provider of service authorized in your country. Simply contact the guy and ask that they can tell you how much it would cost.

  You can find a list of all FSA here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• Satellite Pro A10 stops during the installation of Windows

  I have a satellite Pro A10, which stops during the installation of Windows. The installation gets to the part where I need to select the HARD drive to install, then the system off just. I can restart it immediately, and the sdame happens.

  If I enter the BIOS, everything is detected OK, and I've updated to the latest version (V1.4). Also when in the BIOS, the system will remain under tension for ever and a day! and no downtime. I have a couple of diagnostic CD, then run the tests is the same thing, but I ran the seagate diagnostic tool and the HDD OK passes, as does the main map, but cannot perform detailed testing that the system shuts down during the tests.

  I suspect an overheating issue but would like advice.

  Hmmm it s very strange. I thought that the HARD drive could malfunctions but it of very impossible if the HARD drive has passed the Seagate diagnostic test.

  However, it would be very interesting to know if the installation of the OS would end with another HARD drive.
  You know, it of always difficult to provide an exact solution without any diagnostic tests.

  For me, it really looks like a hardware malfunction. So perhaps it would be advisable to contact the authorized Toshiba maintainer for a control of the laptop.
  Guys could run tests and would situate the fault quickly.

• Satellite Pro A10 stops on specific opportunities

  Hello!

  I am owner of a satellite Pro A10 (PSA15E). It's hard drive stop working, the pc could not find. So I bought a new, a samsung with 160 GB, IDE, of course.

  Now when I was installing windows, in the part file copy, it just stopped. When I boot it says initialization file fails, then I guess it stops when it was to transfer this important part.

  If I run the cd again, it does not format or reinstall/repair request, it loads only some files and try to start windows and then stops.

  Now, this is where the tricky part comes in: the power led in turn, then again very fast when it stops. I do not use the battery (it is already dead too), and I use an universal AC, a give, 70W adapter. I tried formatting via a LiveCD Ubuntu, with no luck, because when I choose "Try Ubuntu" or "Install Ubuntu" it stops a little as he thought, and then when he is about to leave the menu and do something, it stops in place.

  My only guess, is that this laptop doesn't want me more :(

  I could really use some help, I just spent some 50 on a HARD drive for him and he is the only laptop that I have. I don't think that it is a question of temperature because it stops just at specific times, on some specific choices. If I just let it hang there in the menu (the Ubuntu live CD one) it is not closed. Only when I want him to go further.

  Any help/response is greatly appreciated, and if I take a little too much time to respond is because I don't have access to internet at work now.

  Thank you very much
  Ricardo Rebelo

  Hello

  Theoretically, this could be an overheating problem as Akuma wrote. Therefore, you must clean your laptop using a jet of compressed air. This could blow the dust from the cooling fans and can improve the cooling of the laptop.

  In addition, it would be interesting to know what happens if you run Toshiba Recovery disk recovery facility this work?

• Satellite Pro 4600 - stops during installation of operating system

  Hi all
  I have a Satellite pro 4600 that my son bought his first Fixer of computer.

  The laptop comes with the hard drive erased. The problem he is trying to install Windows 2000, the laptop comes with OEM.

  The computer starts up to the windows disk and loads all the files, but when the Windows installation starts the computer stops.

  We are trying to install the power adapter plugged in, and it seems that all the lights are either now or at least works.
  This laptop was announced as work, but with no OS installed. As this is the first that he bought, we have no spare parts to swap around.

  Guidance on what would be the most likely problem, or a good place to start looking would be greatly appreciated!

  First, I would try to clean the laptop with a jet of compressed air. This could blow out the dust from the cooling fans. You can get in at a computer retailer.

  As Akuma said, check the RAM with Memtest86 and also on your disk with the Drive Fitness Test: http://www.hitachigst.com/hdd/support/download.htm#DFT

• Satellite Pro 480CDT: Wave Device for Voice Modem

  I reinstalled Windows 98SE on Satellite Pro 480CDT and it seems to work ok. But when I go into the Device Manager there is a yellow exclamation point in front of > Wave Device for Voice Modem<>

  Do I need to install a driver for it? Could you describe or point me to it?

  Thank you.

  Hello

  Perhaps this explanation can help you http://www.modemsite.com/56k/wave.asp

  Good bye

• Satellite Pro M70 - stopped screen lights

  Hello

  My Toshiba Satellite PRO M70 screen lights.
  I don't know why, but sometimes when the screen is broken and I put it up it turns on, but after a few seconds it stops.

  It started a few days without something strange in my pc like hitting or something like that.
  I tried to connect an external display and it works weell.

  Anyone know why it cant pass or how fix it?

  Thank you

  Greetings

  Toni.

  Hello

  The Fn keys work?
  You can increase the display button narrowly by using the FN + F7 combination?

  Please also check the energy saving profile.
  Maybe the display brightness is set to a lower value in the power saver profile.

  But if you will not find anything unusual in the settings of the software, so I guess that the brightness display problem is related to the failure of inverter FL.
  The FL inverter controls the brightness of the screen, and this part needs to be replaced.

• This external modem will work with Satellite L500-1XL, running Windows 7

  Hello

  When in Spain, I need to use the dialing up to the internet through Telefónica.
  I guess that the L500-1XL is not an internal modem?

  This external modem will work with the L500-1XL running Windows 7?

  Thank you very much in advance for your help.

  A

  Hello

  You re right Satellite L500 doesn t have an internal modem, so you need an external.

  I think you can buy every modem that is compatible with Vista. Alternative ask your favorite computer dealer or authorized service provider

  A friend got good experience with USRobotics 56K modem like this:
  [USRobotics 56K USB Faxmodem USR5637 | http://www.amazon.co.uk/USRobotics-56K-USB-Faxmodem-USR5637/dp/B0019LZCEI/ref=sr_1_1?ie=UTF8&s=electronics&qid=1269253039&sr = 8-1]

• Satellite L300 yourself running Windows 10?

  I own a Satellite L300-1AQ. This laptop yourself running Windows 10. It is currently under Vista Home Premium

  Yes, you can. Im running Windows on my L300-145 10.

• Satellite Pro A100 - unknown device TOS1900

  I have a toshiba satellite pro a100. It came with XP installed.

  I recently installed a bigger hard drive and updated to Vista Ultimate (32 bit) operating system. I downloaded and installed all the drivers on the toshiba site but I still have a 'unknown' device in the device with a yellow exclamation point Manager, it details tab it says:
  'ACPI\TOS1900 '.
  * TOS1900»

  Can someone please tell me what this device is, and where can I find the right drivers?

  Hello

  Have you installed the Toshiba value added Package?

  Isn't it? To do this, and this unknown device should disappear

  Welcome them

• Satellite Pro A120 and device modem on high definition audio bus drivers

  I did e clean install, but I have no sound.
  It takes the bus drivers modem device high definition audio. Anyone know where I can find them?

  Hello

  Have you tried to find on Toshiba support and download page under http://eu.computers.toshiba-europe.com?
  Satellite pro A120 is the old model of laptop and must be fully supported for WXP and Vista.

• Satellite Pro 6100 stops after 15-30 minutes

  My satellite Pro 6100 Cup after 15 to 30 minutes of operation on power outlet. There is a noise and all the lights go out except orange slow flashing (power problem). I have restore by removing the power cable and wait a while.

  It will then start again. I used two different adapters and two different batteries. It also happens if work on AC with no battery in the. My suspicion is an overheat cut-out. The Sat Pro has a? Could it be clogged with dust inside (it is 5 years old)? If yes how I clean. I don't think it's a fan failure because I can hear the fan cut in. Advice much appreciated. Thank you.

  > Could it be clogged with dust inside (it is 5 years old)? If yes how I clean. I don't think it's a fan failure because I can hear the fan cut in
  I agree with you and the user SambadeAmigo. It seems like a simple problem of overheating and so the laptop automatically stops to prevent the equipment from damage

  I assume that your laptop can be enabled again after being allowed to cool. It is a common question if the cooling modules may not work properly because of the dust and debris.
  As suggested, it would be possible to remove dust using the can of compressed air.
  It should work.

  See you soon

• Satellite Pro 6000 stop reboot

  Hi, can anyone help? I installed sp2 on satellite pro 6000. Now, it will not be stopped, just restarts. Did not it before sp2. Any ideas?

  HI Martin,

  I myself remember when I installed SP2, it needs to stop and restart the laptop in order to complete the installation process. It would seem that there problems on your system. I suggest you remove SP2 and re - apply to see if that remedies the situation.

  HTH

• I'm not able to run windows update. [Error number: 0 x 80244019]

  I'm not able to run windows update. I get an error: [error number: 0 x 80244019] I took and I tried all the suggestions on the support for windows Xp article because that's what I'm running [error number: 0x8DDD0010] "When you click on a link, you see the error HTTP 500 - internal server, error 0x8ddd0010 error" but none of these solutions work.  I tried the ' Fix It program this car works but askes me to install Windows XP Service pack 3 or later and .NET Framework 2.0 or later version of windows update but as you can see I can't get windows update to work if it does not really help. "  Any ideas... Help, please!

  What XP SP level are you at?

  For your error: http://support.microsoft.com/kb/883820

  But that will not help you if you are not at the level of SP3.

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28
  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure
  http://support.Microsoft.com/kb/875364

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now