Satellite Pro P100: Lines from screen to screen

Similar Questions

• Satellite Pro P100 PSPAEE guard screen goes white/black

  I have a Satellite Pro P100-PSPAEE running Vista Ultimate. Recently, the screen started going black and white during the day. It does not seem to be asleep like nothing refreshes the screen. All I can do is hold the power button and restart the laptop. Have tried rash, the compressed air fan and have re - configure the minimum processor power management to 100%. Am still getting the problem everyone else encountered this problem and have you found a solution, I would prefer not to have to open the laptop and play with the heat sink.

  Don't you think that this problem could be related to problems of overheating?
  Eventually it s only a software problem

  So try first update the graphics driver and BIOS!

  One question; have you noticed the same issue using the preinstalled operating system from Toshiba?

• Satellite Pro A60 - lines on screen

  Dear Sir

  I got a laptop here soon, who's in trouble with the screen. The screen displays certain lines, how the resolution is lower, how less lines there. The problem started from the moment wherever the person to clean the laptop with an air compressor.

  I guess that the motherboard or Vga was 'attacked '. Can someone please give me some advice?

  Thank you very much!

  Benwake

  --------

  Toshiba Satellite Pro A60BT
  Model No.: PSA65E-01K02EBT
  Intel P4 532 3.06 Ghz

  Hello

  Your guess might be good.
  Either there is something wrong with the GPU (graphics chip) chip or the computer laptop faulty display.

  This can be checked easily. You must connect to the laptop for external monitor and should test the output of the screen.

  If the same lines will appear on the second monitor and then the graphics card should be responsible for this issue. Otherwise, the internal LCD laptop could be faulty.

  In both cases, the service provider authorized in your country should be contacted.

  Good luck and have a great week ;)

• Re: Satellite Pro L100 - lines on screen

  Hello

  I am looking at a Satellite Pro L100 and there are lines from top to bottom on the screen. These are very thin, but boring. IN some cases, the screen is totally blank.
  The lines come and go when I move the screen back. Can you advise?

  Thank you

  Hi csgwasteman,

  I think Al - eX is right. This sounds like a broken LCD cable and it must be exchanged. But for other diagnostics, you can connect an external monitor. You may notice the same problem there? If this is not the case, replace the LCD cable.

  You can order such a cable a certified maintainer:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good luck! :)

• Broke the screen on Satellite Pro P100 - 1 1/2 "vertical white line

  Hello
  I have a Satellite Pro P100 which is only 21 months old and have recently acquired a white strip to the bottom of my screen which is located near Center. I looked into the possible solutions for this and followed the instructions carefully to see if it was a software problem which he seems not to be. The only possible solution seems to be to get the screen replaced. I would like to know if there are many of you who have had this same problem because I'm disgusted that I need to get this replaced so early in his life.

  I don't even use my phone as a laptop (IE it transport etc.) it is simply sitting on my desk at home. I just checked my warranty and apparently it was submitted only for 12 months! Just my luck!

  If anyone has any suggestions on how to best to argue my case with Toshiba in get this replaced for free then the answers are welcome.

  See you soon,.
  Corrina

  > Only possible solution seems to be to get the screen replaced

  Either it's a display or the fault of the graphics card!
  You can try to connect the external monitor to test if the same would appear on the second monitor.
  If the question seems not on the external monitor then it s not a graphics card issue but possible display of the laptop problem.
  In this case, the authorized service provider should be able to provide more details and how to fix it.

  Good luck

• Behavior strange screen/video Satellite Pro P100-109

  I have a strange problem with my Satellite Pro (P100-109 model pspa3e 00n009du). I edge video card printing is letting me down, so if anyone has a solution so please help!

  Yesterday, while working properly since I bought the machine, I had a strange video behavior. Black icon arround windows not updated correctly etc.
  After a restart of the system, these problems seemed resolved, but it lasted just a view minutes.
  After awhile, I got a blue screen (BCCode: ea BCP1...) BCP4:00000001 SP: 2.0) learned Internet research that his had to do with the video driver.

  Symptoms of the display:
  -Vertical dotted lines shown on the screen of the bios toshiba (variety of colors)
  -Loading of Windows show a few vertical lines as well
  -After loading the clickable elements appear black (not titles of window - no buttons shown/rendering)
  -L' screen goes black every 4 seconds
  -System responds very slowly, but sometimes it seems that it works normally
  -mouse disappears
  -After awhile that I get a black screen, system does not answer more.
  -In windows safe mode (so do not using the nvidia drivers), the display seems to work normally

  DID the next trying to solve my problem in vain:

  -J' I uninstalled/removed the nvidia drivers and installed the last on the toshiba site.
  -Deletion of original and installed drivers drivers Guru3D site (also used the Driverutility from the same site).
  -J' I uninstalled/removed the nvidia drivers and installed the original
  -Upgrade to SP3

  Uninstalling the driver (in safe mode) and so to use a generic driver only seem to work.

  Anyone know how this can be resolved or are these signs that the nVidia GeForce Go 7900 has been roasted.

  Hello

  Long story. short answer...

  It is really possible that your GPU chip malfunctions.

  I came to this conclusion because the laptop don t symptoms occur if the graphics driver is not installed.
  If the graphics card driver is installed the graphics card would go with the best performance and possibly graph questions would appear once again.

  I think that you can't do anything to what might solve this problem outside to contact the ASP in your country and ask for help.

  Good luck

• Satellite Pro P100 - screen and sound problems after upgrade to Windows 7

  Hi all

  I got my Satellite Pro P100 (model number is PSPAEE-00C006EN and the second digit of the serial number is '7') upgraded from Vista to Windows 7, and since then, some bugs seem to have had place - can someone help me on the following:

  -L' screen DIMS increments, irrespective of the fact that I have saved my power settings to stay on FULL (battery or sector)

  -No sound. Once or twice, the sound card worked and settings to say this works correctly (and you can see the movement of the graphic equalizer).
  In terms of PC knowledge, I would be 5/10 (so not a dummy, but certainly not a pro! and we tried a lot of the more obvious things)

  Thank you all

  Hello

  1.) if the screen dim option doesn't properly work, I recommend you to reinstall Toshiba Value added Package. This package controls these functions, the keys FN and others. Visit the Toshiba page for an update!

  2.) did you check if the sound is muted if the equalizer work? In addition you can also try to update the audio driver might it work ;)

• Satellite Pro P100-327 no visual don't screen the bios startup

  Hi guys,.

  I have a problem that I think has been there since I upgraded my Satellite Pro P100-327 XP to vista Business.
  At the start, I have more no Visual on the screen until I see the windows logo. Computer works fine otherwise.

  Now a year and a half later I want to load Windows 7 and I can't see the bios screen. F12, F2 or esc. do not help me even if the computer does not stall but I do not see on the screen. I have the latest version of the bios and the nvidia drivers as far as I know.

  The only thing that I did not understand everything is the 'value added package' I think it's the small "HW" program, I downloaded the latest version and clicked on load HW in the control panel. Windows has asked if I wanted to go forward and I saw nothing else after that.

  thaks a lot if anyone can help

  Brian

  Hello

  For me, this looks like a problem of monitor settings but I don't know m.
  You are using an external monitor or have you changed the monitoring (from simple to double mode) mode?

  In your case, I could connect an external monitor and see what happens. Have you noticed the same problem on external monitor?

  In the worst case, there is something wrong with the internal display, but this should be verified by a technician of the laptop.

• Satellite Pro P100-124 starts upward, but nothing on the screen

  Hello world

  I'm a newbie here & laptop but my companion got a satellite Pro P100 (Toshiba Satellite Pro P100-124 PSPA4E-001001EN) & it is my asked for help. Here's the problem:

  Laptop starts to go through the procedure of starting with lights coming and cd player starts to work the rotation of fans, but nothing shows up on the screen

  I said it could be the graphics card but could do with a starting point, I'm PC savvy but on the desktop, it's my first attempt at a portable computer so please be nice...

  Hello

  Have you tried this thing?

  ->, remove the battery and unplug the AC adapter from the portable computer
  -> waiting for ~ 30 min 1 h
  -> connect the two parts again and try to turn on the device

  If this will not help, then it would mean that a hardware problem serious causes this problem and you will need to contact a Toshiba ASP technician to know exactly what s wrogn.

  Good luck

• Satellite Pro P100-188: screen keeps blinking on and off at random intervals tension

  If anyone can help me with my computer so please PLEASE publish it because I have no idea of what is happening to her.

  I just bought a new laptop, a Toshiba Satellite Pro P100 - 188 Dual Core and I'm having a problem with it. Sometimes (not all the time) if the computer is plugged in or not, the screen flashes and repeatedly and then will slow down and its suspicious home.

  I have no idea what's wrong with it, I sent it to the store where I bought to be fixed and they just he sent to me, but the problem persisted. They say they have done tests on the machine and can't find anything wrong with it, but if that were the case, then it only would not have messed up again.

  What is just a software problem? The screen seems to flicker on and off at intervals irregular or not I'm in the middle of using it or not. All the drivers are the latest drivers and I admit now that I'm at my wits end.
  Any thoughts, anyone?

  Hello

  This seems very odd. However, you posted that this problem happens sometimes and not all the time.
  In my opinion I n t think that the software could be responsible for this issue.
  Perhaps one loses the connection cable? But believe me; It's not easy to say what's wrong without diagnostic tests.
  You have suggested that you have sent the unit to the store.

  I recommend you contact Toshiba service partner in your country. Technicians must check the laptop.

• Downgrade from Vista to XP on Satellite Pro P100

  I have a client with a model of laptop Toshiba No. Satellite Pro P100-434.

  He had a recurring problem, DVD playback that vibrates with the image and the sound is not always in line with the image. He referred twice to Toshiba and they told me that they had replaced the DVD drive. The fault was still there so he brought for me to watch.

  I thought it is best to see if the Windows XP installation would cure the problem so installed an of my licenses. He tried for a few weeks and is now happy with our performance. Then I reinstalled Vista and checked for updated drivers. The problem is back as before.

  Now, the customer wants to downgrade to Windows XP. I understand that it is possible, but have been unable to find out where I should apply for the XP product ID. My client feels terrible about the way it has so far been Treaty by Toshiba and who also believes he paid a Microsoft Windows license. He shouldn't have to pay for another. Any help would be appreciated.

  Hello Peter

  I read your ad with a lot of attention and also hope that we can discus things.

  At first, I must say that laptop must be Satellite P100-434 with PSPADE part number. If you want to check the DVD functionality test it with original recovery image. Achieve the clean OS install and test with the original DVD movie using pre-installed software. In my view, that it must be of WinDVD. Win DVD is used by Toshiba for a year, and this software works very well.

  If there is a problem with the DVD drive, please clarify this with the authorized service partner. Please note: test the full functionality of DVD player.

  Something about WXP: Toshiba supports Windows XP Home edition for this model of laptop and all the drivers, tools and utilities that you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads. Before you start to install anything whatsoever from this page to the first a download? Instructionsa facilities? document and install all the stuff following this order of installations. It is very important.

  Now something about the COMPUTER products and treatment of Toshiba: with the new notebook, you purchase a license for the operating system preinstalled. This does not mean that you have? specific? key and can activate all that you want. The alternative operating system to pay for the license. Each copy has own product ID. And don't forget, your customer has misunderstood something.

  Treatment of customer is very interesting topic, but one thing I can say for sure: a lot of people hear things that they do not want to accept and is for the most part, the grounds for claims on a? bad treatmenta?. It is very important to clarify everything and avoid all the problems.

  Good luck!

• Satellite Pro P100 - cannot boot from external USB DVD

  My internal DVD player on my Toshiba Satellite Pro P100 failed, and my windows is broken.
  So I bought an external DVD drive to boot from, so I can recover the system using the product recovery DVD.

  Now, he actually goes ahead and starts from the DVD. But once in the setup it gives me the message: "ERROR: file Setenv.ini D:\Setenv.ini or X:\Tools\Setenv.ini not found!

  So I went ahead and checked if the file was... it was... but it is on Drive E:\ (probably because it's a USB device I'm starting from)

  -J' did some research and found that I needed to run the command: X:\tools\recogui /FE: say the recovery my files were actually on drive E:-which has helped a little... until I got a new error where it was always looking for the *. TPA file on drive D: eventhough I have via recogui had specified otherwise.

  Now what do I do to understand everything is to the recoveryprocedure on drive E: and not D:, as he seems to think?

  As I am in the middle of a period of review, quick response would be GREATLY appreciated :)

  Bad new boyfriend!
  Boot from external DVD USB drive is NOT possible!

  You can start only from the inside, ODD, HARD, LAN disk and external USB FDD (floppy)

  Greetings

• Satellite Pro P100 - 11(d) crashed and Linux does not load

  Hello.

  I have a Satellite Pro P100 - 11(d) which have worked well since 2007 both with preinstalled Windows and Ubuntu last.

  But... Yesterday, Firefox crashes, I thought, but after the restart it was not able to load Ubuntu desktop, comes from a command prompt.

  I tried to reinstall the driver and xserver with no luck.
  Tried to reinstall Ubuntu together, but it stops while loading of Ubuntu live.

  Thought maybe, a hard drive crash so I want to wipe the entire hard drive and so reinstalled Windows, which wouldn't load after installation. Changed the hard drive to a WD250GB, but always the same - stop loading live Ubuntu and Debian and Meego...

  Has a verified memory from the live USB of Ubuntu (before loading Ubuntu), no errors.
  I have an idea that maybe the graphics, but it has no errors or defects to display install screens - graphics.

  Anyone have any ideas?

  Oh, I had Ubuntu while loading, try checking the hard drive and what makes some mistakes, why I thought it might be a hard drive problem.

  Thanks in advance
  Leif

  Hello

  What about another system? Windows?
  Can you start and install Windows system using the Toshiba Recovery disk?

  Generally speaking, it is not easy to say what has caused this problem
  It may be related to no hardware, a part even if the HARD drive or memory error was not detected, one of these parties may malfunction
  Worst case its something wrong with the motherboard but it s only a hypothesis.

• Blue boxes and Bluescreens when you feed up to Satellite Pro P100-438

  Hello

  I own a Pro Satellite P-100-438 (PSPAHE - 001001GR). Yesterday, I tried to start a game, and shortly after, he froze, showed strange bluish rectangles and then a screen blue, followed by a reset.

  Then the screen was full of blue shaded boxes in the nature of a grid as a layer of perfect finish. Even the start screen "Toshiba - contact tomorrow" has this box-grid layer.
  From the login screen Vistas should appear, there is an another bluescreen: 0 x 00000050 Page Fault In Non-Paged area.

  Now, I can only start the computer in safe mode.

  I tried to restore the last configuration of windows work but that did not help. I tried to remove the display so drivers and fiddled with the parameter of startup in msconfig and at one point, I was actually able to get Vista running as usual without the blue boxes, but after awhile, I got another blue screen and since then, they have remained.

  Sometimes, there is an another screenshot as well: 0 x 00000116. nvlddmkm.sys - address 8C8149A0 base at 8 808000, DateStamp 4a9cdd24

  And he said something 'Attempt to reset display driver and recover timeout failed.' as well.

  See these screenshots:

  http://tinyurl.com/yhyopx5 0 x 00000050
  0 x 00000116 http://tinyurl.com/yhsj4co

  Any tips or suggestions?

  Best regards

  Daniel

  Hi again,

  last night I checked if the problem might be related to overheating. But now I think that's not the problem. I removed some dust, but it wasn't really much. Accidents still happen.

  Regarding the graphics bugs: this is the kind of a grid of blue boxes. But this isn't a perfect grid. Only a grid on the screen. I have a photo I will upload tomorrow. When I move the windows under the grate, it stays in place. Everything as it was somehow in the surface of the screen.

  Maybe if the graphics card is broken? It is not the RAM. I removed one at a time, and it is not related to it.

  Somehow check whether the graphics card? It's a Geforce Go 7900 GS.

  The laptop is a Satellite Pro P100-438 (PSPAHE - 001001GR).

  If I bought a replacement graphics card, might be able to buy a better? They're much cheaper than three years ago. Or which would mean too much consumption and amount of heat energy?

  What are the cards would work?

  Best regards

  Daniel

  Post edited by: GambitNC

• Satellite Pro P100 - Hibernate option disappeared

  Caused by a virus, I was recently forced to 'fix' my installation of Windows XP SP2 on my Satellite Pro P100.
  I did it with a 'standard' Windows CD (because restoring one, that comes with the laptop, was supposed to remove all the data and I don't have a recent backup.)
  All series except OK, the fact that when I want to stop the machine, I have more option 'Hibernate '.
  I checked in the options of power management and hibernation is enabled...
  My questions are:
  -How can I get this button "hibernate" in the closing window (without having to reinstall everything from scratch
  S ' it is not possible, is there a way to put the machine mode Hibernate mode in another way

  Hello

  Try it please use the FN + F4 key combination. If everything works, you should see the small window in the middle of the screen with option offered hibernation.

  By the way: is the combination of keys FN + F3 works for the sleep option?