Satellite Pro P300-1FQ - wifi does not work properly

Similar Questions

• Satellite Pro A200-1OM - Wifi does not work in Windows 7

  Hello

  I installed Windows 7 on my Satellite Pro A200-1OM.
  I have updated all the drivers to the latest version.

  But I can't use my WLAN adapter more.
  He always says that there are no networks available, but my access point is standing next to my laptop and on my other laptop, I can see it.

  My wifi adapter is turned on.

  Miet

  Hello

  You don't see any or another WLan in your environment?

  Are you sure that the WiFi is enabled on your laptop computer at 100%?
  Please note that you need to move the material WLan switch and the LED should be on. In addition, you will need to activate the WLan using FN key combination + F8 performs this work!

• Satellite Pro L100 (PSL15E) - WIFI does not work

  I have just reformatted my laptop, reinsalled all good original disk drivers, wireless LAN worked until I upgraded to SP3 and now it does not connect.
  It will only connect if I plug the cable, RG45

  Any ideas?

  Hello!

  After the SP3 update, have you checked the Device Manager If WLAN card is recognized correctly? If this is not the case, this!

  In addition, I would recommend updating the driver WLAN. Maybe you have an older version of the driver that isn t working properly with SP3.
  Here you can download new WLAN drivers: http://aps2.toshiba-tro.de/wlan/

  In the worst cases you must downgrade to SP2. A friend had me also some problems with SP3 and after downgrade to SP2 it worked well again.

  Good bye

• Chicony webcam on Satellite Pro P200 1.3 does not work properly

  This built-in Chicony webcam is slowly driving me insane.

  Sometimes it works (not since last week though). Usually, I get a message saying it is locked by another application - or it does not exist. Now, I can not even friends view webcams.

  The cam is displayed on my screen and seems perfect, but no one can see me! When I try to view the cam of friends, I am told that it is not connected.

  Now, I checked my device manager and it is not yet installed-just disappeared! I have recommended download driver Toshiba Europe (camsoft-2007081...), uncompressed, ran it, restarted, but apparently my laptop does not detect the webcam - even if a blue light flashes!

  Please get out me of my misery... someone!

  Thank you, thank you, gratias, go raibh mile, etc., etc.

  I read that sometimes the internal TV tuner would block the internal webcam and so this error message.
  But as far as I know this laptop was not equipped the internal TV tuner, and therefore, this possibility is not relevant.

  Always is it that any application locks the webcam software. In case you would you recommend to go the msconfig and disable first the webcam services that run in the background. Then turn it back on.

  In most cases, this helps!
  By the way; I noticed this problem only with yahoo messenger and ms. Skype works ok!

• Satellite L670 - after Win 8 upgrade WIFI does not work properly

  Afteer upgrade to Win 8, the WiFi of my Satellite L670-128 has stopped working properly.

  The connection only works some time, usually only a few seconds before the connection is lost.
  After a few seconds or minutes the connection is restored, just soon to be lost again.

  Cannot download large files or even to see larger photos on normal web pages. Is there any Win8 driver for Broadcom coming 802.11n network card, or should I throw one 2.5 year old computer in the trash?

  Buy a usb-wlan card is not an option, as wireless mice is already "permanently" reserving one of the three usb ports and wlan card it would be just to the left...

  To my knowledge this L670 series isn t Win 8 taken in charge and this means that there is no special Win 8 drivers for this device, so I put t think you will find an another Win 8 driver for this WLan card.

  But do you really want to throw this laptop in the trash just because the wifi does not work properly running Win 8?
  The device was working properly under Win 7?

  I would recommend running a few Wlan test.
  For example; Disable wireless encryption on your router and Wifi connectivity with the open network do that just for testing purposes, perhaps you will need to change the type of encryption to test.

• Satellite P25-S520 - DVD player does not work properly

  Difficulty of DVD player or buy the external drive

  My DVD player does not work properly, in fact it can never work properly. Recently, I tried to back up my PC on a DVD using Norton 360. Norton did not recognize that the DVD was present. Then I tried to write a text file on a DVD and was a failure. DVD + R and DVD-R media were found to be (Maxwell 16 X).

  I could have probably lived with this however, I received a copy of Dragon NaturallySpeaking version 10 on a CD and my Toshiba would not recognize it. I tried the CD in my laptop nearby and it was recognized.

  An attempt to update the driver has also fails.

  I was able to copy a CD of music last night so that at least works properly.

  Does anyone know how can I fix? The important part is to be able to load my new program.

  Research on some forums I found that other people have had problems with the Pioneer drive. If the drive can't be fixed, I'm not adverse to buying an external DVD drive. Unfortunately, where I live there is no brick and mortar stores selling external drives and I prefer to avoid the hassle of getting a drive online and discovering that it does not work with my Toshiba. Can someone suggest an external USB drive that will read and write CD and DVD and is certain to be compatible with my Toshiba?

  Thanks for any help,
  Humbaba3000BC

  Satellite P25-S520
  PIONEER DVD - RW DVR-K12D
  Driver provider: Microsoft
  Driver date: 01/07/2001
  Driver version: 5.1.2535.0
  Digital signer: Microsoft Windows Publisher

  Any external USB CD/DVD drive will be compatible with your laptop.

  However, you won't be able to boot from CD (run recovery for example) If you are using an external drive.

  So, your best option would be to replace the internal drive with a Toshiba drive designed for the laptop. Call an ASP and request a quote.

• Satellite Pro P300-1AY: Vista does not display computers XP network group

  On my show w Satellite Pro P300-1AY with Vista, my old XP computer is not always displayed in the list of working groups.
  On my old XP computer, I still see the new Vista computer

  Can you tell me why the Vista computer not always displays the XP computer in the network group?

  On the commputer of Vista, I traced a directory on the XP computer and it will connect even though the task force list does not show the XP computer under the list of networks

  Hello!

  Have you disabled the firewall on the XP computer?
  Maybe a 3rd party security software is blocking it.

  Check the registry and go to:
  HKEY_LOCAL_MACHINE es\lanmanserver\parameters
  In this case don't Scream no entry with the name of Hide.
  If you have such an entry, delete it.

  Good bye

• Satellite Pro L850 - keyboard / touchpad does not work

  Hi all!
  I just bought new Satellite Pro L850 with windows 7 64 bit on a recovery partition.
  I have a big problem of internal cause keybord does not work under windows. In the bios, I can do anything I want. But the first configuration of windows (I can not deal with same user name and the name of the computer), keyboard does not work. I own windows version (with programs toschiba - recovery partition).

  It seems that this is not a cause of hardware under the work of bios keybord problem.

  Extra I have updated the bios last version 6.50, but not noticed any changes.

  Please help me with this question, cause I don't have any idea what to do now.

  Good day and w8 for answers

  PCZ

  PS. external keybord on usb work!

  Post edited by: pcz

  The whole story seems incredible. Keyboard and new laptop does not work?
  Install the check and image recovery again if the situation is the same. If the problem persists contact your local dealer, explain the situation and ask for Exchange.

• Satellite Pro C650 - cooling fan does not work

  My Satellite Pro C650 overheats and stops automatically within 20 minutes of leaving upwards. I checked the CPU fan and noticed that it does not turn upward, even if the laptop would become very hot. I tested the fan with a 9 volt battery and it works perfectly.

  Can someone tell me exactly what the problem is? And how to solve it.

  Thank you.

  > Can someone tell me exactly what the problem is?
  On this virtual path, no one can say with certainty what the problem is. We can only speculate what may be the problem.
  Usually, cooling fan starts immediately after starting the laptop slows down and offers the optimum temperature of material. After reading your ad I didn t understand how it works. He turns and there is no sign of life?
  Problem can be power.
  Cooling fan will be controlled by sensors of temperature and activity depends on the temperature of the material but if your machine cooling fan does not work, I imagine that there is no electric power.

  What do you think?

• Satellite Pro 6000; sleep function does not work after upgrade W98 SE to XP

  I bought a windows XP cd and installed on W98 on my Satellite Pro 6000. The sleep function does not work now. I probably need a software of Toshiba. What do I need? Where can I find? What is the order of installation?

  Hello

  All drivers Windows XP Home edition, tools and utilities you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads. You have old laptop model and because of this type of product, you choose option ARCHIVE.

  Order of the facilities is as follows:
  -Windows XP
  -Display driver
  -Audio driver
  Toshiba - common modules
  -SD Card host driver
  -SD Card Driver
  -BlueTooth Stack
  BlueTooth - Easy Connect
  -Mouse driver
  -Modem driver
  -LAN driver included with Windows XP
  -Infrared driver
  -Toshiba Power Saver
  Utilities - Toshiba
  Toshiba - post Mobile
  -Toshiba Console worm.
  -Toshiba Hotkey for display devices

  I hope that you will be able to install Windows XP Home edition successfully.

  Good luck!

• Re: Satellite Pro S500 - brightness adjustment does not work correctly

  On my Satellite Pro S500 (preinstalled Windows 7 64-bit) change the brightness by pressing FN - F6 or FN + F7 does not work. The other NF - f... combinations seem to work correctly.

  When I press FN - F6 (or F7) a control box to change the brightness to poster (as expected), but the level is still displayed as "1" independent of the current value (for example changed from Control Panel or with the eco utility) and it is not possible to change it with FN - F6 or F7. I just reinstalled vap and restarted the computer, but nothing has changed.

  Hi asdf.

  I put t know what s wrong exactly but normally the FN keys are associated with value added Package, but you wrote that you already reinstalled

  In my opinion, you should try a system restore to an earlier point. Maybe something messed up the registry, you can start System Restore in Windows Advanced Boot menu.

• Satellite Pro L350 SSD upgrade does not work

  Hi all

  I'm trying to upgrade a Satellite pro L350 with ssd, currently I try with an ssd samsung 830. I've already updated the bios to version 2.2, but it doesn't work. Can someone help me?

  Concerning

  Mike

  and what exactly does not work?

  The SSD is recognized by the BIOS?
  Have you checked if the SSD has need of a firmware update or if a firmware update is available

• Satellite A500-17 x - wifi does not work - not found in Device Manager

  Hi people,

  I need help please.

  My wireless adapter does not work.
  It worked perfectly until I connected to a wired connection in a hotel I was staying in and since then I can not connect to my wireless router.

  I tried restoring the tosystem several times to old dates, but it has not solved the problem. When I restart the computer laptop and go into devices and printers, I thought that the computer needs to be troubleshooted.

  The program runs and try to install the driver for the Wlan but returns with errors. Namely, windows could not load the driver or can verify the digital signature.

  There is also no icon in the network for lan wlan connections only. When I use the radar in connectivity doctor tells me that the WiFi network is disabled but I can't understand how to activate it.

  When I start in safe mode and go to Device Manager I see the wireless network adapter, but when I try to install the driver I leave safe mode and restart. I did and then the WiFi network is displayed in the Device Manager but when I try to load the driver, I thought that the driver is updated and then the adapter disappears from the Device Manager.

  I'm so frustrated at this point and I'm very close to a full erase and start over.

  I also tried to reload and load the default configuration settings in the installation program, but didn't make any difference.

  My laptop is a Satellite A500-17 x with windows 7 64 bit.
  The WiFi network is Realtek RTL8192E Wireless Lan 802.11 PCI - ENIC

  Hello

  Go to BIOS (press F2) and set it to default settings.
  Save the changes and restart the device.
  Then try to reinstall the WLan driver again.

  If that does not help, download the most recent and updated BIOS to BIOS first day.
  Then, restart the device and try reinstalling the Wlan driver.

  Last but not least you could test the WLan feature on laptop running with factory settings current (after using the Toshiba Recovery)

  PS: in order to use the WiFi network you must use the FN + F8 key combination and must turn on the WLan (in front of the laptop) switch to position.

• Satellite Pro M30-701: TouchPad does not work after installation of XP Pro

  My touchPad does not work after reinstalling XP Pro OS with recovery disk. I install a driver for Toshiba M30 - 701 Synaptics TouchPad tpdrv-sp-m30-xp - 7920.zip

  Can you help me solve the my problem please?
  Excuse my bad English...
  Thank you
  Jorge Neto

  HI Jorge,.

  If you have reinstalled your system using the Toshiba recovery disks the touchpad should have the right drivers and be fully functional. I seem to remember that it is possible to disable the touch pad using one of the "keyboard shortcuts" (F9 on my SA30) in order to check that it has not been inadvertently pressed.

  Kind regards

• Satellite M70-181: the wifi does not work

  Hello

  I'm in New Zealand at the moment and a fortnight ago, I changed my bios password but forgot it. To solve this problem I send the laptop to Toshiba in Christchurch and they reset for me. But since that day my wireless does not work. When I turn it on not even the light. Is not in one of the normal places (like in the network environment or how ever you call it).
  Would it be a problem with the hardware, and it is easy to fix by cause me I didn't have the waiting time until they do it again in Christchurch.

  Thanks for all the answers

  They could have damaged antenna card wifi inside your computer. If you have technical skills, you can fix it yourself, but if you don't just send the laptop back and let check them again.