Satellite Pro U400: How to remove folder HDD Recovery Vista running Win 8

Similar Questions

• Satellite Pro U400 - How can I get the native screen resolution for external monitor?

  I have a samsung syncmaster external screen connected to a Satellite Pro U400.

  The resolution of the screen goes up to 1280 etc. but the minimum samsung is 1440 x 920 (ish I forgot).
  How can I get the samsung to display full screen expanded to save my eyes of the realativively small screen internal?

  Hello!

  Have you tried to update the display on your laptop driver? Check the Toshiba site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, it would be interesting to know if you are running the factory settings or you have installed your own version of Windows?
  And what operating system are you using? Have you installed all Windows updates?

  For external LCD, monitors, you must set the screen refresh rate of 60 Hz.
  And if you want to change the resolution of the screen, you must select the second monitor in the graphics options on Windows.

  Good bye

• Satellite Pro U400 - how your last long battery time

  Hello everyone!

  I bought a toshiba laptop (satellite pro u400), but I think he has a very short range, about 1 h.
  Someone like that have a computer toshiba laptop?

  How long your battery last time?

  Thank you!!!

  GLO :-)

  Hello

  I have a U400 and I also use it with the battery.

  I use it for surfing the internet and writing
  Execution of the laptop with battery I always set the brightness to the minimum, and in this case I can use it for about two hours.

  If the screen light is set to max and the HARD drive and the CD/DVD drive works then your battery time will likely decline at a time.

  So, as you can see the battery time work depands defintialy on the use of the laptop...

  Welcome them

• Satellite Pro M30 - how to remove dust from fan

  I have a model satellite Pro M30 about 5 years.
  It seems to run hot and the fan seems to work a lot in the background.

  I was told to clean the dust around the fan, it's a big job.
  According to me, that there are a lot of screws on the bottom.

  Can help a whole based on do it myself

  Hello

  You do not need to disassemble the laptop.

  You can remove the dust and debris using a jet of compressed air.
  These aerosols can be purchased from the local computer or online dealers.

  I do from time to time to make sure that my laptop would not overheat and guess what; It is useful!

  Check it out.

  Welcome them

• Satellite Pro U400: How to configure the VLAN for the Marvell Yukon LAN control.

  Hi all
  I need to access the 2 VLANS with the controller LAN Marvell Yukon 88E8072 for my Satellite Pro U400. I installed the necessary Configuration utility network Marvell tell me after installation, VIRTUAL local network settings must be mounted in the Device Manager (Windows 7, right click on computer, properties, click device/network management adapters/double on Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller), I can't find a thing to configure here but wake-on-LAN.

  Any suggestion? Thank you!

  Michael

  Hello

  I think that in this case, you can use a network switch.

• Satellite Pro A300 - how to access the installation of Vista hidden partition?

  AHOY!

  I have a Satellite Pro A300 PSAGDA 2000R

  It had Windows Vista installed when I got it, but after a while, had to reformat, so I did, (I want to reformat my computer every 6-12 months on average), it came only with XP disks even if he got a serial number for Vista on the underside of the laptop so I installed XP. That was about 2-3 reformats there now.

  However, so that finding drivers I've seen mention of a hidden partition to reinstall Vista (which I hope it is 64-bit) and tried to do this several times but unfortunately it does not work, I guess that maybe what XP installation I can accidentally deleted or something? (Thought they had in fact on some solid state memory which could not be written more or something.)

  * Is there a way I can access it, take another that won't cost a ridiculous amount (for example download) or a nice person enough to create an image to download on a site or something that I can download file sharing? *

  I have also a spare copy of Vista (and a bit of XP) on the drive, none of them will work?

  + Another thing which I am interested in is can I get any of the preview of Windows 8 OS that will run on this laptop? Apparently it improved performance on Vista and W7 would be convenient for running on a laptop, and I have also heard say it is possible to upgrade to the full version of the preview or W7 for a minimal cost and would probably be much cheaper than other methods if possible. +

  And I'm actually quite handy with computers, so don't be afraid to throw big words at me,

  (Tried the methods found on the manual on page 3-8 ([link: http://www.mytoshiba.com.au/support/computers/satellite/pro/a300/psagda-02000r/download?os=22]).)

  I have European A300 and I believe that the principle on the rest of the same models.
  A300 was offered with Vista preinstalled but without recovery disc Vista. Image that contains the operating system, drivers, tools and utilities for recovery has been saved on the HARD drive and with book factory owner was able to begin the installation of HARD drive recovery. It works with the factory only settings.

  With preinstalled Toshiba laptop recovery disk creator owners have been able to create the recovery disk that can be used if the disk HARD recovery doesn't work anymore.
  If you don t have access to this image saved on HARD drive recovery, you must use the recovery disc. If you don t have the disc that you have a problem. Recovery image can not be downloaded. All you can download are the unique rivers, tools and utilities that you can use if you install a clean version of the OS (operating system).
  On the European models, recovery image was recorded on the second partition of HARD drive in the folder called HDDrecovery.

  Anyway, A300 works with Win7 32 bit. I installed it on my machine and I m very happy with it.
  > Another thing which I am interested in is can I get any of the preview of Windows 8 OS that will run on this laptop?
  I put t know who should give you this overview, but the fact is that you get it from Toshiba. You should check if you can get it in another way.

• Satellite Pro U400 - 13 k - can not connect on Vista - SOLUTION

  Setting of the Romanian regional components at installation time makes you unable to log into vista: Runtime LogonUI.exe error

  Model: Satellite Pro u400 - 13 k.

  No problem:

  Installation of vista start preinstalled, idir a u400 - 13 k,.
  When prompt change to Romanian locale

  Result: after completing the installation of vista program, LogonUI.exe crashes with Microsoft C++ Runtime exception dialog box.

  _Solution: _

  * Restart in mode safe then burn collection amovible.*
  * Restrat configuration then do not change the regional settings *.

  Hope this helps other customers until it is resolved.

  * For Toshiba QA Team *: I spent almost 4 hours to work around your untested product. Please at least fix this bug for other clients, as the time is important to everyone. I guess this can be linked to the logon request is not properly located or crush fingerprints.

  Kind regards.
  sandi_ro.

  US Forum: http://laptopforums.toshiba.com/tshb/board/message?board.id=brd_SatPro&message.id=180

  Hi Sandi

  Thanks for this solution.
  This could be useful for all users who are looking for such a solution here in the forum.

  Greetings

• Satellite Pro 4260: How to remove the DVD drive?

  I have a 4260 Pro Satellite and it seems that the DVD drive is broken and I want to replace it. I can't figure out how to remove the old.
  Does anyone know how? Is there a manual with available how?

  Thank you

  Hello

  This notebook is not know for me but has checked some sites on the net and it seems that the top cover must be removed.
  Then lift the CD-ROM/DVD-ROM drive to disconnect PJ700 on the CD-ROM/DVD-ROM of PJ15 card on the system board.
  Remove the two screws that fix the Board Connector CD-ROM/DVD-ROM.
  Separate the brace connector connector Office CD-ROM/DVD-ROM and CD-ROM/DVD-ROM CD/DVD-ROM drive

  Well, I think that it of not easy for a person without experience.
  So if you n t know how to do and you have without much experience you should ask someone how knows what to do ;)

• Satellite Pro L10: How to remove the user password

  Hello

  I work for a school and we have a bunch of laptops Satellite Pro L10. I put a supervisor on all laptops password think this problem would be solved (I didn't enter a password each time the machines are enabled), but one of our students seems to have found its way to the HWSetup utility in Control Panel and could save a user password on one of the laptops.

  Alarmingly there seems to be no way to clear the password of the user, even though I have the supervisor password. I can get the BIOS as a supervisor, but the definition of a user password option is grayed out. Can anyone provide a solution for my problem?

  Thank you

  Hello

  Well, I think that this problem could be solved by updating the BIOS to the version 2.60 or greater.
  But the problem is that the password has already been fixed.

  I read in the paper of Toshiba that all passwords must be removed before starting the BIOS updates.
  That's why I think it would be advisable to contact Toshiba service partner to remove first the user password, and then update the BIOS.

  You know it's very risky to update the BIOS of the device when the user or any password has been set.
  It of possible that the BIOS update procedure will be interrupted if the password exists.

• Satellite Pro L100 - how to remove the keyboard

  I have a L100 which has been "sprayed"... don't ask...

  How to remove the keyboard... ideas please

  see you soon

  Bob

  Hello Bob

  The keyboard replacement procedure is almost on all Toshiba laptops. At, first of all it must remove the cover above the keyboard (where the buttons are placed).

  After doing this to remove the keyboard is very easy.

  BTW: is your laptop under warranty? Please be careful about this.

• Satellite Pro 2100: How do I order the recovery CD

  Hi all...

  I tried to use the search function to find the answer to this, but so far, I've been unable to.
  I just had my laptop Toshiba Satellite Pro 2100 old friends, but the HARD drive is full of stuff I would never like games and old family photos that he told me to just delete.

  Unfortunately he hasn't his recovery disk and I tried to enter the serial number in the disk drive service replacing and he says he's too old...

  Anyone know where I can get one from?

  Hello

  Hmm... the Satellite Pro 2100 is the old series of laptop and I doubt it could be possible to order the CD from recovery for this unit. But to achieve this, I recommend contacting the local Toshiba ASP for some details.

  Another possibility to install the O on this old could be the use of the original CD of Microsoft Windows. After the installation of the own XP operating system you could visit the page of European disc of Toshiba and could download the necessary drivers.

  You can find the drivers in the ARCHHIVE region.

  Check it out

• Satellite Pro A10 - how to remove the optical drive?

  Can anyone give me some advice here please. I am trying to remove the DVD drive existing my A10. I removed the screws of restraint, but the Player cannot slide out. I checked for other screws but have found nothing.
  Any help or advice would be greatly appreciated.

  Hello

  As far that know that a single screw fix the drive.
  Turn the face of the computer down and remove the two screws fixing the CD-ROM
  Drive.
  Turn on the computer to face and open the display. Press towards the Group of CD-ROM drive and disconnect all of CD-ROM drive in the PJ1800 on the system board. Remove the two screws which support CD-ROM of the entire disc CD-ROM. Remove fixing two screws fixing the support side and remove the lateral support.

  All that s

• I lost Windows Vista on Satellite Pro U400 - how to get the original configuration

  All;

  I missed upwards at the start of my new laptop... I fail to use Vista.
  So I used the system recovery DVD. a version of Xp installation crashed the Vista partition!

  How can I get the original installation of this machine...?

  Any help is welcome...

  Kind regards...

  Hello

  Try with https://backupmedia.toshiba.eu/landing.aspx

  Good bye

• Satellite Pro U400 - how to upgrade the BIOS from 17/07/08

  I downloaded the update to the bios - the following file: bios - 20080717104036.zip
  I unzipped. But the way I did it twice and then I can not find the file to install this update.

  The first file of the sip consists of another zip file and in the second, there are 3 foulders: BOOT, EFI and SOURCES and 1 file BOOTMGR that is not a program.

  Can someone tell me what should I do with this update in order to install?

  Hello, Olga

  Updated the BIOS, you can use 3, 00 - WIN version. Extract all the files listed on the desktop, run WinPhlash.exe. Update BIOS version WIN can be done under operating system running.

• Satellite Pro S300 - how to install XP next to Vista?

  Hello world
  could you please tell me if there is a standard way to install a new copy of "WIN XP" next to the pre-installed "Vista Business", recovery usig disks included in the packaging of product or using a standalone installation CD?

  Thanks in advance

  Hello

  As far as I know the XP disc that comes with the laptop you can t make a system dual-boot. It s only one disk to downgrade from Vista to XP.
  You can try to post your score, but it s on your own risk.

  In the worst case, you will need to use a Windows XP that you can buy in a computer store or somewhere else. Then it s definitely not a problem to make a dual system boot between XP and Vista.
  I have my laptop Toshiba system dual boot with XP and Vista and it works well! :)