Windows not loading programs

Similar Questions

• Windows not loading after system reboot after installation of the last security update.

  Windows not loading after system reboot after installation of the last security update. Have you tried last known good Configuration, Safe Mode, neither of her works.

  No matter which option to choose, it comes to me to the BIOS boot screen after 5 seconds in loading Windows.

  Running Windows Vista 32 - Bit with SP2 installed system. 2 GB OF RAM. Intel G31 Mobo.

  Dated this February 11, 2010.

  I managed to restore my Windows to previous restore point, using the CD of Vista to start, and then select repair Windows. I hope this helps.

• When I try to turn on my PC it reads windows not load correctly

  When I try to turn on my PC it reads windows did not load correctly.  Go ahead and load up but it will do several times before of icons appear on the desktop.  When I try to go to the internet and the fact many times.  Sometimes it can show dupping 100 files.  Do I need another computer or if I can do something that will help stop this?

  Original title: hard to load PC

  Hello

  Perform the steps from the link below and see if it helps.

  What to do if Windows does not start correctly

  Hope this information helps.

• Automatic update of Vista SP2 won't let windows not load? !! 0xC0000102! 3125/4933 (inkwatson.exe) this is where its decisions

  My Vista Home Basic which is pre installed on my Asus laptop computer did an automatic update to SP2 and then ask to reboot the computer, now I can not start vista it stops to! 0xC0000102! 3125/4933 (Inkwatson.exe). I tried to boot into safe mode (each of them listed) and cannot it stops at Loaded:\windows\system32\drivers\crcdisk.sys. I even tried to use my recovery disc but nothing comes even after pressing F9 only said memory and windows vista boot check in the Tools section... someone can tell me what to do
  I want to reformat the system but can no longer Hat
  Thnks in advance

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, , but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or repost in the Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost, are kindly Error Codes and exactly what happens when you try to update.

  In this way, you will receive the best help.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or you can try this:

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And here's the General information regarding the use of the recovery disk:

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then restart with the recovery in the drive disc.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  See you soon.

  Mick Murphy - Microsoft partner

• system recovery I tried and it's not now, windows not loading not windows

  My computer (HP G71) gave me a few problems, so I backed up my files to an external drive and tried to do a system restore.  When I ran the system recovery, I got an error message which said he couldn't do that and restart.  I clicked on the OK"" button.  When it restarts, it's just sitting at a black screen, Windows never came.

  Hello

  I think it was worth it to run some basic tests, just in case there is a problem with the hardware behind the problem of recovery.  You can do the following.

  Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the BIOS (usually f10) and under the Advanced or the Diagnostic tab, you will find the possibility to run tests on the hard drive and memory.  Post back with the details of any error message.

  If the test above all pass, but you do not know the product key on the COA label 25 characters, you can order a replacement set of recovery disks using the link below - these discs will not need to enter a product key and the activation of the operating system will be automatic. The procedure for using recovery discs to reinstall the operating system (Factory Reset) is detailed in the document of HP here.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• When I turn on my HP Pavilion dv7-1245DX Turion 64 windows vista computer does not load

  My laptop is a HP Pavillion DV7 1245 DX/Turion 64 bit running Windows Vista. When I turn on my laptop, the fans run, the lights are on, but windows only is not loading. I left on for a few hours and windows not loading always not. I would like to know if there is a way to solve this problem. My laptop is not quite 3 years old.

  Thank you
  Cori827

  Hello

  When you turn on the power, you do not get the HP Splash Screen Logo?

  The screen remains completely black?

  If so, you have a hardware problem.

  If under warranty, contact HP.

  If it is not under warranty, contact a repair shop, local.

  See you soon.

• my windows cannot load

  Hello
  I installed windows xp on my pc, but it does not work after 3.4 days
  first of all, it cannot load IE and another APP
  and after 3.4 reset my windows windows not loading not. This means that I can't see my desktop icons.
  I removed my windows and intalled it new, but in each 2, 3 time this problem occurred.
  now, how I can solve this problem.
  Thank you

  Hi mohsen pour kalhor,
   
  -You receive an error message or error code while this problem occurs? If Yes, indicate the same.
   
  Check the event viewer if there is no error message related to this issue and after returns with the State to help us help you better.
   

  Check out the links given below to do the same thing:

  Using the event viewer        

  Procedure to view and manage event logs in Event Viewer in Windows XP

• Windows allowing not to load programs

  Windows now does weird things. To start a program, I have to click on its icon. Then Windows asks what program I want to open it with. It does not allow me to do a cover or restore either. I just tried to download SP2 and he asked me what program to use, I chose the stub and then he asked what I wanted to use to run spinstall, because there are no files on the computer, I can't install SP2. I wish to address this problem. I tried to support, but the site does not recognize the pid for the operating system, even if it is the same format they require. Any help would be great.

  Thank you

  Mike

  Download and run this

  http://www.Winhelponline.com/fileasso/exefix_vista.zip

  If this post answers your question, click mark as answer .

• Safari does not load pages after sleep in the active window

  Please note: I'm French, so what you read is not perfect. Thank you.

  Hi everyone, it has been so long that I tried to solve my problem on Safari.

  Let me explain what happens: when I wake my Mac, some site not loading, including Youtube, Facebook and Google until I

  -Close the Safari window and open a new

  -Wait at least a minute or two

  -Spam the shortcut for refresh up to what a "page not found" error.

  I tried all explained in this or other forums and do these things:

  -Reinstall the operating system (but keeping my data)

  -Restore with a Time Capsule

  -Open the terminal and type these commands:

  -Fixed permissions and owner

  sudo find ~ $TMPDIR... - exec chflags h nouchg, nouappnd, noschg, nosappnd {} - exec chown () $UID h - exec chmod + rw {} + - exec chmod () n h ++ - type d - exec chmod h + x {} + 2 > & -.

  -Reset Safari

  MV ~/Library/Safari ~/Desktop/Safari-'date + %Y %hour %m %d ' %s; RM - Rf ~/Library/Caches/Apple\-\ Safari\---------Safari\ Extensions\ Gallery; RM - Rf ~/Library/Caches/Metadata/Safari; RM - Rf ~ / Library/Caches/com.apple.Safari; RM - Rf ~ / Library/Caches/com.apple.WebKit.PluginProcess; RM - Rf ~ / Library/Cookies/Cookies.binarycookies; RM - Rf ~/Library/Preferences/Apple\-\ Safari\---------Safari\ Extensions\ Gallery; RM - Rf ~ / Library/Preferences/com.apple.Safari.LSSharedFileList.plist; RM - Rf ~ / Library/Preferences/com.apple.Safari.RSS.plist; RM - Rf ~ / Library/Preferences/com.apple.Safari.plist; RM - Rf ~ / Library/Preferences/com.apple.WebFoundation.plist; RM - Rf ~ / Library/Preferences/com.apple.WebKit.PluginHost.plist; RM - Rf ~ / Library/Preferences/com.apple.WebKit.PluginProcess.plist; RM - Rf ~/Library/PubSub/Database; RM - Rf ~/Library/Saved\ Application\ State/com.apple.Safari.savedState

  -Fix permissions with the inbuilt system tool

  sudo/usr/libexec/repair_packages - repair - standard-pkgs - volume.

  -Log in as a guest

  -Start in safe mode

  -Switch to recovery mode and put something else in the window "resetpassword.

  -Remove all apple leaves me with the GUI (cookies, cache, etc.)

  -Mess with network settings, but it's obviously very well because other programs have no problem for example. Chrome, Firefox, Mail, Push notifications...

  -Uninstall all extensions safari

  -Unplug my micro sd card and reboot (which is constantly plugged into my mac)

  I am so angry with my computer because I paid 1.5 k for a computer that is not able to make the task easier for a modern computer. Even a €50 computer has embedded software that can handle a resume from sleep without having to restart the entire software... Imagine if you had to do it on your iPhone, you will eventually get a refund within a week or less because it is not normal in 2015 to have this kind of problem. I hope that I have no problem with safari on my 6s and I don't plan to spend my browser because Safari is part of the Apple ecosystem and have the perfect sync and battery management.

  So I need to get this fixed a problem and I really need your help because a lot of people had this problem on the internet, but NEVER seen someone who explained how it happened is the correction of a problem. My Mac running the latest version of the software which is 11.2 starting today.

  Here is a video of the problem:

  https://www.YouTube.com/watch?v=AjfAlkKEVsc

  And some examples of the threads on the internet, I found the same problem:

  Safari does not work after the mode 'sleep'. Apple support communities

  Safari doesn´t supported pages after waking up

  Safari does not load page after waking up

  Facebook doesn't "work" after the awakening from the sleep - MacNN Forums

  Corruption Safari       See post by Linc Davis

• Could not load the profile on Compag Presario CQ57, w/windows 7, problem.

  Please help me I have a Compag Presario CQ57 with windows7, "they say that the profile could not be loaded," then the question is how to get in my computer, open it to work on this problem or resolve or how do I over ride side comments so that I can get that side I forgot the password I have set up on this side. Can someone tell me how to get into the other side of the user that I forgot the password of connection for this side of comments that I put in place.

  Thanks for the comments,

  Compaq Presario user/owner.

  Hello

  You can try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Pick a point to restore at least 24 hours before the opening of the session the question and then perform the restore.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Another option you can try is to run through the steps in the guide on the following link.

  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-Lo...

  Kind regards

  DP - K

• I get this error "Flight Simulator could not load some program files and will now close" - does anyone know how to solve?

  I get this error "Flight Simulator could not load some program files and will now close" - does anyone know how to solve?

  Hello

  I suggest you to please follow the steps described in the following articles and check if it helps.

  "Invalid product key" error in Microsoft Games, MapPoint, or Streets & Trips

  http://support.Microsoft.com/kb/812467

  How to get a new product key for Microsoft Games for Windows, Streets & Trips, or MapPoint

  http://support.Microsoft.com/kb/973457

  Let us know if it helps!

• Pool sharks will not load in Windows 7

  Original title: pool sharks

  I downloaded this program I have windows 7 home prem, but it does not load when I login. can anyone help?

  Hi Justin,
   
  In more matter of Ken,.
   
  You get an error message / code trying to load?
   
  I suggest that you follow these steps and check if it solves the problem:
   
  Step 1:
   
  After you have downloaded and installed the game.
   
  a. right click on the .exe file and run as administrator
   
  Step 2:
   
  If the pool sharks is not compatible with Windows 7, run it in Windows compatibility mode .
   
  If none of the help of suggestion, contact the game manufacturer for a better support.
   
  Aziz Nadeem - Microsoft Support
   

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Windows 7 not loading Vivilisation 2 (32 / 64 bit error - see the software manufacturer)

  Hello

  Help, please. My favorite - game Civ 2 does not load on my computer laptop windows 7. It worked fine on XP. The game is pretty old, but it will not yet be installed on my PC. All operating requirements exceed this quite old game, but a 32 / 64 error message appears when you try to run the installation.

  I tried to change the mode of compatibility, but in vain!

  Thank you

  Simon

  Hi Simon Help,.

  According to the Center for civilization 2 compatibility is not compatible with Windows 7 64-bit and 32-bit: http://www.microsoft.com/windows/compatibility/windows-7/en-us/Search.aspx?type=Software&s=civilization%202&os=32-bit

  Uninstall the program and reinstall in compatibility mode. During the installation, the program in compatibility mode make sure you install drivers 64-bit if your 64-bit operating system or install the 32-bit drivers if your operating system is 32-bit, because 32 bits can not work well for 64-bit device.

  Link for reference below: make older programs run in this version of Windows

  http://windowshelp.Microsoft.com/Windows/en-us/help/bf416877-c83f-4476-a3da-8ec98dcf5f101033.mspx

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• my CD player repeat myself no CD not loaded but there is and it won't record from windows Media... Help

  my CD player repeat myself no CD not loaded but there is and it won't record from windows Media... Help

  Hello

  1. What is the exact error message associated with no CD loaded?

  2. do you mean to say Windows Media center?

  Perform the steps from the link below and see if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or any other programs (Fixit)

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/

  Hope this information helps.

• My TSSTcorp DVD +-RW TS - L632D does not work, error "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  And it displays the following message: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». I tried all the tricks troubleshooting to no effect. I uninstalled and reinstalled and look for the updates to install. What should I try next?

  http://support.Microsoft.com/kb/314060

  Your CD or DVD drive is missing or is not recognized by Windows or other programs