Satellite U400 - note to Windows 7

Similar Questions

• Satellite U400 - need drivers Windows XP

  I want to buy a Toshiba u400 and I know it comes with Vista, but I like XP and I want XP.

  Then I'll install XP over Vista and format the Vista and my question is when I joined the toshiba site on important FACTORS for XP for Toshiba u400, that I could find DRIVERS for Vista and NOT XP, why :(? and what do I do? where can I find all the DRIVERS which was under Vista when I buy Toshiba u400 but all DRIVERS for XP instead?

  Here's a picture I want to say: [http://i39.tinypic.com/1zl62jt.jpg]

  Thank you.

  I can understand your problem, because if I look on the Toshiba site I founded all the drivers for Windows XP.
  Try again. On what website you are looking for?

  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers
  Laptop-online Satellite-online Satellite U series-online Satellite U400-online Windows XP

• Satellite U400 not reconnect to WLAN after coming out of hibernation

  I have a Satellite U400, and I connect to my office wireless network. It works great until my laptop goes into hibernation mode.

  When I bring it from hibernation, it do not reconnect to my wireless network and I have to restart.
  Once restarted, it connect fine.

  Does anyone has an idea why this is happening and what I can do to fix this?

  Thank you

  David

  Hello David

  Usually these problems are resolved with BIOS and WLAN driver update. Have you tried to solve this problem with any of these updates?

• Satellite U400 - 13K PSU45E Windows XP & 4 GB RAM

  Hello!

  I have a Satellite Pro U400 - 13K (model: PSU45E-00800DGE), with 4 GB of installed RAM (800 MHz). I used to work with Windows Vista Business SP1 32-bit, which was the pre-installed operating system, and I could see all the 4 GB of RAM in the properties of "My Computer".

  Last a few days and aftert 2 years of work with Windows Vista, I decided to downgrade in Windows XP Professional 32-bit, as I faced incredible problems with performance. Even though I had very low temperature on my proceccor carrots and only 4-5 open applications (Ms Outlook, IE, Adobe Creative Suite CS3 and a little more), I looked at my phone to freeze for about half a minute and still to come! I have spent many months trying to figure out what's wrong, I changed the machine, I reinstalled the system several times, but when there was a big load, that happened more and more often. So after reading a few posts on several forums, I realized that Windows XP need fewer physical resources for the same things and I decided to downgrade. It is only a few decades in time, but if I can work faster, that's OK.

  Thus, we come to the question! After a successful installation of Windows XP Professional 32-bit, using the official, given restore disc with the laptop (it came with two operating systems of two bilingual English & Greek), I realized how fast he could be with Windows XP Professional 32-bit! I could ' t believe that...! Why I was using my laptop with Vista, all these years, I have no idea! The problem is with the memory, like that cannot recognize the 4 GB of RAM, even if they have installed SP3 and all updates provided Microsoft Windows. I'm sure that Windows XP Pro 32 bit can 'see' the 4 GB of RAM, as I had 4 GB of RAM with Windows XP on a desktop computer, I have no more.

  I also tried the/3 GB and the/PAE boot.ini spends some time, but nothing else. The problem is that I do not remember what I have on my desk, or how that has memory, but I don't know that I had 4 GB of RAM in the 'Properties' window I searched on the net also to find a solution, but I couldn't find the boot.ini file switches and parameters of the BIOS, which is not based in the settings of the BIOS of TOSHIBA laptops.

  Is a solution provided by some user/technician exprerienced, about this Windows bug?

  Thank you very much in advance for your kind cooperation.

  Angelos Pitsos

  I've never tried XP with up to 4 GB of RAM to be honest, anything over 2 GB should be more than enough.
  32-bit operating systems can only address a total of 4 GB of RAM, why you can't access all this RAM is because the address space is also used for the system resources such as network cards, scsi controllers and graphics cards etc.

  Richard S.

• C55-A-1N1-Sound Card/micro satellite does not work Windows 10

  Hello

  Since the execution of the upgrade to Windows 10, my sound card or the microphone is recognized, so my system is completely silent. According to the information on this site, this model should benefit from the launch day (today) - where can I get drivers for my laptop? I can't use it without the sound.

  My computer is the Satellite C55-A-1N1

  Thank you

  Maybe this thread could be useful:
  http://forums.Toshiba.com/T5/Windows...UE/TD-p/644836

• Re: C855-1EL Satellite will not start Windows system

  I have had trouble with my Satellite C855 1EL lately and now cannot even start Windows.
  The black screen reads the following:

  Intel UNDI, PXE - 2.1 (build 083) Copyright (C) 1997-2000 Intel CorporationThis product is covered by one or more of the following patents: US5, 307, 459, US5, 434, 872, US5, 732, 094, US6, 570, 884, U.S. 6 115 776 andUS6, 327, 625
  Series of Realtek PCIe FE Family Controller v1.24 (07/10/10)
  Press the buttons on the unit...

  and when I formatted I find no hard drive

  Hello

  As I understood the message: the HDD doesn't appear when you try to install the system. Right?
  HARD drive is listed in the BIOS?
  It should appear on the first page of the BIOS, providing details on the size of the HARD drive and name (part number)

  If this isn't the case, the HARD drive may be defective and that's why the system cannot be started.

• Satellite U400 PSU40E on Windows 2000 SP4

  Is this possible?

  Can anyone direct me where to get a full download of the drivers?
  Please email me [email protected]
  Thank you

  As far as I know, this is not possible and this newer model cell phone is certainly not possible that old operating system such as Windows 2000.

  Toshiba doesn't offer these drivers.

• Satellite U400 - not reading DVD

  I have problems with my DVD-rom. It reads all CDs, but when I insert a dvd in there, it gives a bit of sound, but do not read. Help, please.

  Above all, try to remove the down/up filters in the registry:

  http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

  Have you tried high quality media such as Word to Word?

• Re: Satellite U400-112 - BIOS update error

  Hello

  I have a Satellite U400-112 with Windows 7-64 bit OS. I can't upgrade my system v4.00 to v4.70 since windows or DOS.

  Specifically, when the upgrade starts according to the file and then check it stucks without any progress. This error means the two versions (DOS & Windows).
  I have a strong feeling that is a corrupted bios file. If someone can justify my feeling or a good file BIOS it is asked to answer.

  Thank you in advance,

  Ioannis

  Hey Buddy,

  Update the BIOS of BACK is not possible because the updates are only based on the Windows.
  In any case, what update BIOS error that you get exactly?

  If you try to update, make sure that the value added package is installed. That s necessary for the program to update the BIOS.

  But why do you want to update? Normally it of not necessary if your system works ok.

• Re: Satellite U400 - failed to start the system recovery

  I have a Satellite U400-PSU44E and Windows Vista Home Premium 32-bit preinstalled and having some problems with my computer, had decided to use the hidden partition on the hard drive to fix the system.
  I chose 'Repair your computer' (or something similar to this), but having done, a message tells me that,

  "The installed program cannot start. Click OK to turn off the computer. »

  I don't know why that is. Can anyone help? It would be greatly appreciated.

  The Partition Recovery seems to be defective. You can order the replacement of Toshiba recovery disks. Which country are you?

  Another possibility could be that the HARD drive has failed. in this case, you will need to send the system to an ASP for repair.

• Re: On Satellite U400 Bluetooth does not work with windows 7

  Hello

  I have no model of Toshiba laptop U serious (satellite U400 - 10 L): PSU40E-00F00WAR) is XP OS. but I change to windows 7
  Since bluetooth does not I tried all the driver but not of their work

  can someone help me?

  Thank you
  Best regards

  Post edited by: DKNY2000

  Hello

  I think that you have to install [bluetooth software | http://aps2.toshiba-tro.de/bluetooth/index.php?page=download]

• Satellite U400-17Y - Bluetooth does not work after upgrade to win 10

  Hello

  I have improved my Windows7 laptop at 10 now. While upgrading to windows 10 he messaged device RFCOMM Bluetooth may not work with Windows 10. So now, my laptop Bluetooth not working do not. Opening of Bluetooth, it shows "Error-ECCentre-1.exe - Application Error (Oxc000007b)". Currently installed Bluetooth Stack is - v8.00.12 (T).
  My Toshiba laptop is Satellite U400-17Y.
  Kindly help please as soon as possible.

  Concerning

  Hello

  I have improved my Windows7 laptop at 10 now. While upgrading to windows 10 he messaged device RFCOMM Bluetooth may not work with Windows 10. So now, my laptop Bluetooth not working do not. Opening of Bluetooth, it shows "error-ECCentre-1.exe - Application Error (Oxc000007b)". Currently installed Bluetooth Stack is - v8.00.12 (T).
  My Toshiba laptop is Satellite U400-17Y.
  Kindly help please as soon as possible.

  Concerning

• TPSMain.exe does not start on Satellite U400 - 14 p PSU44E running Win XP

  Hello

  I installed Windows XP Pro SP3 on my U400 PSU44E - 14 p.
  I found all the drivers on the official website of Toshiba (thank you) but one in the origin of the problems: TPSMain.exe does not start when I start the computer.

  Once I type my password and login, I hear a typical Windows error sound, but no message is displayed. I noticed that when you try to start the Toshiba Power Saver utility from the Control Panel, I got an error message telling me that I have enough privileges to run this utility...

  I am the administrator!

  If you guys encountered the same problem and got a hint of trouble, feel free to post here. THX.

  I have a Toshiba Satellite U400 and I installed Win XP too.
  I have a user account administrator and Toshiba Power Saver works properly!
  No problem don't like on your system!

  However, in the Toshiba Power Saver Settings (installation options), you can find the option called limited allows the user to change the settings and allow different actions for each profile.

  Check that both are enabled!

  If this doesn't help then reinstalling again this tool.

• Satellite U400 will not usually start upward

  Hi all

  I have a Toshiba Satellite U400-217 (PSU44E) running Windows 8.

  Worked fine until a week ago. Now, when I turn it on, the lights are, there is a memory hard drive spin (1 second) - and then nothing. Above the keyboard lights stay on, but the screen remains black.

  I read a use Reset where you take the battery and the power cable on and press and hold power for 30 seconds, then plug the power cable in, starting at the top, stop, reinsert the battery and start again.

  However, the machine still primer not after 30 seconds the hold button. I always get just the lights and nothing else.

  However, the machine will start usually fine on an attempt to out all 30 or more.

  It's boring - ideas or suggestions very welcome.

  Thank you very much

  KaiBosh

  > However, the machine will start usually fine on an attempt to out every 30 or more.

  In my opinion, you should first check the HARD drive
  A friend of mine installed Win 8 on the new computer laptop from another manufacturer
  After a while that the laptop will not start I thought its something wrong with the card mother, but in the end it was just a HARD drive failure

  To be honest I n don't know if his only problem disk HARD but in my opinion, the HARD drive is one of the first pieces that need to be checked
  OK, in the worst case, it could be possible that dysfunction of this mobo.

• Command buttons and lights not working not properly - Satellite U400

  I am currently facing a problem with my Satellite U400, which runs under Windows Vista / Bios v3.00.
  First, the control buttons no longer work, as when I press on them, nothing more. It was that when you press on, the LED lights for a while and then come back to life.

  Now, LEDS are constantly lit. Even when the laptop is turned off and the cable is removed.

  So far, I tried to turn on and turn off the LED option in the Bios (that is turned on and off the LED on the touchpad and the logo of Satellite, but not on the control buttons). I uninstalled and reinstalled the Value Pack from recovery CD - no change. I deleted and reinstalled the Windows called devices: ACPI fixed feature button (thought this might help).

  Is there anything else I could do?

  Once the problem is resolved, I wonder if the command buttons can be customized. For some reason I do not seem to find the appropriate program to set those.

  Thanks for any input.

  Hello

  Someone suggested this work around:
  You must install the utility to control on the one hand, and where to install the value Pack, choose Advanced Options and uncheck the Support Button TOSHIBA.

  Welcome them