Satellite U920t: Win update - impossible to restart even when power off / on

Similar Questions

• Portege R700 - releases of the battery even when power off

  Hi all

  I had a search on the forum but not found all the messages related to a question, I do experience where the battery will run out at night even when the R700 is powered off.

  I recently disabled the option of USB charge but this has not resolved the problem (even if I never used it actually load anything, it seemed to me a good starting point).

  I was wondering if this issue has been seen a resolved elsewhere before asking Toshiba to replace battery?

  Thank you
  SystemShock.

  Have you also tried this - http://aps2.toshiba-tro.de/kb0/FAQ9C015N0001R01.htm?

• voice on does NOT even when her off in settings and return to factory reset

  voice on isn't turned off, even when its off in settings and I did a btw the last Apple tv a factory reset update

  For the VoiceOver:

  Settings > general > accessibility > voiceover

  For a description of the Audio:

  There are two parameters that can affect the audio descriptions; the first is a universal framework and can be found at settings > general > accessibility > Audio Descriptions and the second is a parameter that affects the movie playing, it is sliding down while the movie is playing and change the language setting on the audio tab.

• Satellite A300-PSAG8E - drive HARD light flashes even when I do nothing

  These are my problems

  1. my HARD drive indicator flashes even when I do nothing (flashes every half second or more)

  2. when I go somewhere my screen turns off and when I move my screen mouse lights up but nothing happens. Everything stands still (sometimes 20 seconds, sometimes 2 or 3 minutes) and it is ready to operate.

  BIOS upgrade to the version 2.20

  OS: Windows 7 Ultimate
  Laptop: Toshiba Satellite A300-PSAG8E

  Someone knows the solution?

  Need help please! Thank you

  > 1. My drive HARD light flashes even when I do nothing (flashes every half second or more)
  Even if you n touch cell phone t, the disk is running and different applications, access data. Applications and processes that are running in the background cause this blinking. Notes; This isn't a problem!

  > 2. When I go somewhere, my screen turns off and when I move my screen mouse lights up but nothing happens. Everything stands still (sometimes 20 seconds, sometimes 2 or 3 minutes) and it is ready to operate.
  Disable the support by modem and disable the settings turn off the screen while the laptop is not in use. This is possible in the Windows 7 power management.

• Re: Satellite A100-638 has a stuck key even when I unplug the keyboard.

  I have a Satellite A100-638 with a stuck tab button, up to now, I got around the problem by using a USB keyboard and keytweaking program.

  Unfortunately recently I got problems of coherence on the disk. I installed Win XP on and I can't do a consistency check due to the cancellation scans if no key is pressed. I tried to unplug the keyboard of the laptop motherboard, I think I made the success, but the Tab key always records as being pressed.

  The USB keyboard is fine and has no problem whatsoever.

  If someone could help, I'd appreciate it.

  Looks like the keyboard on the motherboard controller may be defective.

  Are you sure this isn't a driver/software problem? Have you recently installed a USB mouse?

• Laptop frequently is off and does not restart even when the Start button / stop is held in

  I have a notebook dv7-3060us running Windows 7, some mornings (every few days or weeks), I find, powered out and does not.  In press and hold the power button for 5-10 seconds has no effect.  I have to unplug and remove the battery to restart.  What happened several times.  I tried it with the battery removed, and it fails again, then.

  A software problem can cause this?  I thought that holding the power button causes a material interruption and the BIOS takes over.

  Is there a known hardware problem which can cause this?

  Thank you

  Adam

  Hi Sean,.

  Thanks for the suggestion.  Unfortunately, the steps listed for a hard reset was precisely what was needed to market every day.  So, we did about 50 times.  The real issue was whether a software problem could cause the phone to require a hard reset every time.

  After not getting no response for a few weeks, I have restored your computer from a backup, I made after the update in the first place and then re-set everything.  So far, it has remained stable, which brings me to the conclusion that it is, in fact, a software issue.

  Kind regards

  Adam

• Satellite L355 not trun on at all even with power

  Hello

  My Satellite L355 will not turn. She lights up indicating that it is powered both the battery and the power cord, but the actual commissioning light won't-is not in mode 'sleep', it's just next door. I took out the battery and re-installed several times also took out the hard drive and reinstalled.

  Could this be the motherboard?
  Any idea is appreciated - thank you!

  Hello

  Is your laptop under warranty?
  If so, an authorized service repair is free and will cost you nothing. :)

• Satellite A500 - 14 c: fan RPM changing even when idle

  I noticed that my fan is almost always above the silent mode.
  Even to just look at Web sites, send emails... the fan continues to go from top to bottom... and usually stay in rpm higher for a while.

  Air coming through the vents isn't hot, so I wonder if it's a problem of overheating or any drivers/BIOS problem.
  Anyone?

  Hello

  The fan doesn't always work with maximum performance because is not necessary if the temperature does not increase to a higher level.
  The module cooling fan works sometimes more fast and sometimes slower and it always depends on the temperature level.

  If the module of cooling turns faster then that would mean that the internal temperature has increased. The fan would remain at this level, if the temperature would not go down.
  But if the temperature drops then the fan might turn a little but slower and the laptop would be quieter.

  This is common behavior of laptop and nothing unusual and not the problem

• Windows Vista business is update, download and installation; even when the update is set to manual.

  I put the manual update manually. But despite this it keeps update, download and installation. Sometimes I turn off a few updates and suddenly, after a few hours, these unwanted updates begin to update! This is a joke, very annoying and the invasion of privacy!

  Could be group policy... .getting applied on your system... Best regards, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

• A satellite - new battery is flat when power off

  Hi all

  I have a new battery that the other was under warranty.

  When I stop and turn off the power to the computer, the battery seems to be running in the back ground as when I turn on the pc there are only about 3 percent of power in the battery.

  What are the correct settings, so I can stop and the battery does not get used?

  Thank you
  Jacquie

  Hey,.

  Really shut down you the computer, or it is in standby mode? No battery power is necessary if you turn off the computer or switch to hibernation mode. Standby battery power is required.

  In addition, you wrote that you have a new battery. How many times you load the already? A new battery must be charged at least 5 times to reach full capacity.

  If you have loaded the battery is battery LED color change?

• Why anti-aliasing Illustrator CC exported files in Photoshop, even when turned off anti-aliasing?

  Hi all

  I just changed to CC of CS5. My Illustration workflow involves export from Illustrator to Photoshop. I disable anti-aliasing in the export options in Photoshop to make net angles. For example,.25 black line exports ch as a wide black line of a pixel.

  When exporting CC of Illustrator, I select 'none' to the anti-aliasing when exporting, but art is anti-aliasing in Photoshop. For example, exports of line noire.25 to PS as a line blurred grayscale.

  Have I missed something or that I can't export a line of true crenellated Illustrator to Photoshop more?

  Thanks for any help!

  This problem has been FIXED in the version of Illustrator CC 2014.

  Now I can use it!

• Impossible to restart the computer

  original title: restart

  Vista 64 will not restart without turing power off for 60 seconds

  It is almost certainly a hardware problem any.  It's a laptop?  If so, it may have something to do with the battery or the AC adapter.  It can also be a problem with the power supply.  It could be quite a few other things as well as those who would be my prime suspects.  I recommend that you take it to a repair shop of computer with a good reputation for service.  Or you can return it to the manufacturer for repair (and certainly do it if it is still under warranty).  Check out the price, guarantees, calendar, availability of parts, reputation and any other factor that you consider important and decide who to choose.  I suggest you do a complete backup before that you take or send as likely (or minimum) that they erase everything from the hard drive during the troubleshooting process.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• iPad Pro think Smart Keyboard is still connected, even when it is not

  Hello. I have an iPad 9 "Pro that I've just updated to iOS 10. I had a Smart keyboard because I bought the iPad 6 months ago.

  Since I updated the operating system, even when I disconnect the iPad since its Smart keyboard, iPad think he is always connected, and I can not access the on-screen keyboard. It happened not in iOS 9. Suggestions/help?

  Thank you.

  Hello NerdyMomBriggs,

  Thank you for this info and choose Apple Support communities. I know how it is important for you to have your Smart keyboard and iPad Pro work properly again! If I understand correctly, you cannot have your Smart keyboard automatically cuts your iPad Pro when you pull the Smart keyboard physically the Smart Connector. To start, make sure your iPad Pro and Smart Keyboard are in a position to Type. Remove the Smart keyboard for your iPad Pro. Restart your device, like closing down and starting process is important to keep the iOS software works correctly. Once your iPad Pro is restarted and return to the home screen, reconnect the Smart keyboard and test the question.

  Use your Smart keyboard with iPad Pro
  Restart your iPhone, iPad or iPod touch

  See you soon!

• printer has a paper jam, but no paper is in it, even when checking from the inside.

  so my B209a Photosmart has a paper jam but there is no book anywhere, even when take off the rear. I can't even print. so idk what to do. Help?

  A real paper jam and a false paper jam are troubleshoot-carried out in the same way. Please check the steps in the document located here.

  I hope this helps.

• Satellite U920T - function keys does not work after update to Win 10

  Hello, good morning / evening...

  I use (U920T satellite) and recently updated my Windows 10 Tablet
  but after that, the function keys, volume, brightness, key FN and even the backlight does not work anymore!

  I tried to restore the system and update the driver software but nothing has worked...

  I use these keyboard shortcuts all the time and now it's really hard without them!

  What is the problem? What should I do?

  The problem is that U920T satellite is not listed as Win 10 support unit and, therefore, drivers earn 10 Toshiba and software that controls the FN keys is not released.
  But as far as I know using the FN keys, system of Toshiba and the Support of Flash Card Utility driver must be installed.

  For all Toshiba units win 10 supported, the drivers can be downloaded from this page:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  Maybe you can try the drivers released for other models of portable Win 10 supported...
  I'm not sure if the software will be compatible with your model of U920T, but its certainly worth a try...