Satellite U940 - 12 c: Windows 8 license code?

Similar Questions

• Satellite U940 Windows 10 update, very slow start to the top

  Hello

  It looks after upgrade to win10, the SSD is not used to quickly boot up the laptop.
  How can this problem be solved?

  In tools, defragment disc, it shows all of my partitions as SSD drive so I can't defragment.
  Why are they displayed as SSD? I think that the basic motivation is a 500 gb HHD and only a 32 GB SSD is included.

  Also in the management of the computer disk SSD drive shows only 11.22 GB of capacity and is not used (all 11.22 GB free)

  Help, please. I want to get the quick start of the win8.1 and at the same time be able to defragment my HARD drive.

  Posted by some_user
  

  Hello

  It looks after upgrade to win10, the SSD is not used to quickly boot up the laptop.
  How can this problem be solved?

  In tools, defragment disc, it shows all of my partitions as SSD drive so I can't defragment.
  Why are they displayed as SSD? I think that the basic motivation is a 500 gb HHD and only a 32 GB SSD is included.

  Also in the management of the computer disk SSD drive shows only 11.22 GB of capacity and is not used (all 11.22 GB free)

  Help, please. I want to get the quick start of the win8.1 and at the same time be able to defragment my HARD drive.

  Hello

  Same problem here with a weak start after the upgrade to Windows 10 (with a Satellite U940-11 t).
  If anyone has the solution, it could be great :-)

  EDIT: I just saw this post: https://forum.toshiba.eu/showthread...-to-Windows-10
  I will try this solution.

• Windows 10 not supported for Satellite U940

  I have a U940 satellite. I've had it for over 3 years and I like it.
  Last weekend I went to the update free for WIndows 10 and updated level to her with my Windows 8.1.

  It works, but now I've discovered (maybe I should have read) that the Satellite U940 is NOT a device supported for Windows 10.

  Why is this?

  I plan to go back to 8.1, but for now the 10 Windows works for me.

  What will that mean for me long term and which leave people?

  Thank you very much!

  As you probably know that it is not possible to provide full support for all models of laptops. On some point of Toshiba, and other manufacturers must create a furrow, and decide which models will be more sustained.

• I have a valid license for Windows XP key code, so why the system tells me it is not currently active or real?

  Windows has no

  I had to spend my PC this morning. Moving it, I decided to implement a new network card. When I reconnected it all the cables, I plugged my USB mouse on another USB port where it had been plugged in before. The computer is more than 7 years old and I've never had a problem with the front Windows Validation. I have a valid license for Windows XP key code, so why the system tells me it is not currently active or real?

  When Windows checks to see if you have moved your copy of Windows to "another computer", among other things, that his focus on the identification of several strands of material in the computer to see if they are different than when Windows was first installed.  I do not remember the list for now, but I remember that the network card is one of the pieces - and IIRC it is 'valuable' higher than others to reach the conclusion.

  You probably other elements has changed over the past seven years and now Windows has decided to have a "new" computer  Assuming that you haven't changed the motherboard - if you had, you would have had this issue at the time wherever you did--your installation is still legal.  Reactivate using your original license key. It should work online, but you will need to call the number that appears in the error message from re - validate.

• Family Pack with upgrade 3 license code does not work for Windows 7 Home Premium

  I bought Windows 7 Home Premium, with upgrade license 3 Family Pack.

  Yes, it is a genuine Microsoft product, bought at best buy original and worked fine on another PC.
  I tried to update one of my HP Pavilion yesterday which came with Windows Vista. Installation works well, but at the point where he asks me the license code, he says, it's the bad code and there is nothing I can do to go.
  Help, please.

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• My computer has rolled back and I lost my license code, how can I find? I am running windows xp and Photpshope items 12

  Hoping someone can help my computer has rolled back and I lost my license code I'm running windows XP and Photoshop elements 12

  If you registered it with Adobe, you can login to your account and find:

  Quickly find your serial number

• Satellite U940 - SSD drive shows only 11.22 GB

  Hello

  I had a new Satellite U940 - B484 Ultrabook.
  The first thing I did was finishing the wizard, then I created the recovery media (using external DVD drive) on three discs 4.7 GB DVD

  We have Windows 8 Pro license, so my friend formatted the system and installed new Windows 8 Pro, it seems Miss upward with the pilots decided to return to the status of the plant to find and download the appropriate device drivers.

  Even though we got the recovery ended, we have two questions:
  Major problem: SSD drive shows the only 11.22 GB capacity!
  Minor cause: a device in Device Manager does not work properly!

  There is no logical explanation for the SSD size down from 32 GB to 11FR?

  Think only entered in my mind was the ability to have the 2x16GB and the RAID (for some reason any) changed from RAID 0, RAID 1. But even if that's true, where Devil can I change to go to?

  > Is there any logical explanation for SSD size down from 32 GB to 11FR?

  You have probably installed Win 8 on the SSD drive and this is the reason why you have only 11 GB of free space.
  The laptop seems to be equipped with a 500 GB HARD drive and a 32 GB SSD.

  I recommend you to check the available on the SSD drive partition table.
  You can check in the Disk Management to win 8

  Control Panel-> administrative tools-> computer-> disk management management

• Satellite U940-108 - Tempro does not work properly

  In my Satellite U940-108 I open Tempro but if I click anywhere to see the windows me screen TEMPRO don t work and be close

  Are you using the original version of the OS preinstalled?
  I ask this question because I'm U940 too and Tempro works perfectly.

• Satellite U940 - stuttering & audio dropouts using NI Traktor Pro

  Hello

  I am DJ & artist and recently bought a toshiba for sets dj ultrabook parade and live sets with traktor pro.
  I also do computer repairs so I know my way around the pc...

  Now, at the beginning I had an occasional stuttering or interruption, which I blamed on the system settings, so I made a few tweaks here and there, disabled some stuf, uninstalled some bloatware...
  Everything seemed ok.

  But my last show was a nightmare, suddenly all hell broke loose! Stutters major interruptions and I had to put in a cd backup which is pretty stupid when live...

  Now, before everyone says its software trakor or a material that is causing the problem... No, this is not!
  A lot of testing already before posting here

  This is a finding of latencymon:

  * CONCLUSION *.

  Your system seems to have difficulties of audio manipulation in time real and other tasks. You may experience dropouts, clicks or POPs - due to breaks. A problem may be related to power management, clear the settings in the configuration of the BIOS and CPU limit sign. Automatically search for updates to the BIOS.
  LatencyMon has scanned your system for 0:05:30 (SS) on all processors.

  * INFORMATION SYSTEM *.

  Computer name: BONAS
  OS version: Windows 8, 6.2, build: 9200 (x 64)
  Material: SATELLITE U940, TOSHIBA, VCUAA
  CPU: GenuineIntel Intel (r) Core i5-3337U CPU @ 1.80 GHz
  Logical processors: 4
  Groups of processors: 1
  RAM: 8081 MB total

  Now for 1000 new machine announced as Monster media is not how this machine should run.
  My last chance, if I don't find the sollution is format all and put on clean windows 7 without all the stuff of toshiba which could cause this...

  You mentioned the Wdf01000.sys (Kernel Mode Driver Framework) files in your message.
  As much as I know, that it is a hardware driver internal Microsoft which is placed in
  C: the folder \Windows \System32 \drivers.
  The driver gives you access to the computer or ancillary equipment.

  The reason why this file appear as a troublemaker can be connected to external devices connected to the USB ports as external mouse or other device.

  To be honest, I wouldn't recommend disable or delete this file because it s a clean Windows driver and may be important to keep the system working properly.

  In your case I recommend you check the connected 3rd party devices and also to test the combination of Traktor and Sat with connected U940 adapter mains or battery only. Also test it with WLAN enabled.

  Your comments and good luck would be appreciated

• Re: Satellite C850 - cannot start windows 8.1

  Hello

  I have reset clean my Toshiba Satellite C850 with USB windows 8.1 but now if I start the laptop on it happens has this code 0 xC0000001.
  I can not start safe mode cannot use advocatus.

  Help, please

  Hello

  Have you installed original recovery image that you created on the USB key?

  Please try to install it again. Usually after installation of the own image of recovery your laptop should boot correctly.

  By the way: have you noticed this problem right after the installation, or later after some updates to install.

  Have you tried to solve it using Windows start-up settings?

• Satellite U940 PSU6VA - Dual boot with Ubuntu based distributions

  _ * My specifications: * _
  * Model: * Toshiba Ultrabook (Satellite PSU6VA - 00S 002 U940)
  * Operating system: * Windows 8.1 x 64 (upgrade of Windows 8 x 64)

  I would like to set up my computer to dual boot with Windows 8.1 (x 64) and Zorin OS 9.1 (64-bit).

  ZORIN OS is a derivative of Ubuntu which maintains a binary compatibility with Ubuntu i.e. Ubuntu and Zorin use the same drivers and can run the same applications. John Damascene is more or less just Ubuntu with a different desktop environment and some additional preinstalled applications.

  So far, I know that I need to disable the QuickStart Windows 8.1. What I have to do something else (for example disable Secure Boot, CSM, etc.)?

  In addition, my Ultrabook comes with 2 hard drives: 500 GB HARD drive and a 30 GB SSD. Windows uses the HARD disk for storage and for implementing SSD caching, through technology Intel Rapid Storage Technology. Is it possible to set up John of Damascus to do so (preferably without disabling caching on Windows)?

  NOTE: I prefer to do things using graphical interfaces, rather than the CLI. I don't mind given CLI instructions; also just showed me the GUI equivalents if possible. I use the CLI if there is no alternative.

  Post edited by: Justinian

  Hello

  See my responses / comments among your questions (I took part of your message and inserted here):

  So far, I know that I need to disable the QuickStart Windows 8.1. What I have to do something else (for example disable Secure Boot, CSM, etc.)?

  Answer: If you want to dual-boot, do NOT select WSC as preventing Windows to start.
  You shouldn't have to disable startup secure either, but I can't promise that. I think that Ubuntu 14 has support for secure boot.

  In addition, my Ultrabook comes with 2 hard drives: 500 GB HARD drive and a 30 GB SSD. Windows uses the HARD disk for storage and for implementing SSD caching, through technology Intel Rapid Storage Technology. Is it possible to set up John of Damascus to do so (preferably without disabling caching on Windows)?

  Answer: No, I don't think that there is a way to use the SSD in Zorin without making it unusable for Windows.
  Suggestion - let it be.

  Tom BR

• Satellite U940-103 with Linux - Touchpad does not & poorly programmed FN keys

  Hello

  I bought a toshiba Satellite U940-103, and I installed ubuntu 13,10 dual boot with windows 8.1.

  The problem is that the touchpad is not working and the fn are false (fn f2 key suspend the computer instead of the brightness control).

  I tried to install linux different sistem (Mint cinnamon 15, 13.04 ubuntu, ubuntu 12.04.3) but they still have the same problem, even in the live cd.

  I tried to ask the Italian Forum of ubuntu, but they have solutions do not work...

  Thanks for the help
  Yun

  * PS.* sorry for my bad English. Is it normal that my laptop seems overheated and my battery life seems to be reduced when I use Linux?

  Hello

  Yes, you're right!
  In the direct (stable mode without having to install), the touchpad does not work.

  However, once installed, it will work.

  In regards to shortcut keys, yes they are mapped correctly.
  They are treated to the old-fashioned way (former Toshiba models had the mapping used by Linux on this model).
  If you want help, file a bug report on bugs to Ubuntu system.

  You can always change the brightness by using the GUI (Control Panel > brightness & Lock).

  Fun with Ubuntu on your device!

  Tom BR

• Satellite U940 - download Health Monitor

  Recently, I managed to updated the integrity monitor (which paradoxically the Heath monitor recommended).

  An error indicated there was "an older version installed", and I was advised to remove it all first. I did, doesn't have any path to be automatically informed of pilot and other improvements, including the health monitor.

  It seems that the health monitor has not saved the download file - it is not in the downloads. He recorded other places? He did not me, invites so the location is hardcoded, wherever she is.

  I only do that because a previous update of the bluff Health Monitor driver my touchpad driver.

  OK... you'd think I'd be able to download the new drivers manually, right? Alas not. My part number doesn't seem to be acceptable for the selector of downloads on the selector to THE Toshiba window, and even there is no model of U above U500 in the drop-down list of templates.

  So much trouble here!

  Can anyone suggest how I might have the correct setup file of Health Monitor for my Satellite U940?

  Thank you

  Hello

  Can you please post full model name and the part number of your laptop?
  I want to just check the Toshiba download page and try to find the right version to download.

• Satellite U940 - after the update of Win8.1 FN key stop working

  I have ultrabook Toshiba U940-b484, after I updated my system windows 8.1 all FN keys does not work and after more try only up/down switch soung and brightness keys is just the word, and keyboard light switch is not working too, all solutions?

  Concerning

  I by Satellite U940-103 and I did Win8.1 with success. Everything works perfectly.
  My only solution is: Win8.1 update must be performed according to the instructions of update Toshiba Win8.1 instructions for installation and http://www.toshiba.eu/innovation/generic/windows8_1-upgrade-stepbystep/ document which can be downloaded on Toshiba support and download page.

  Have you installed all the specific tools available Toshiba and utilities?

• A few questions after the downgrade of Win 7 on Satellite U940 - 11L

  Hello

  friend of mine bought the Toshiba Satellite U940 - 11L which had Windows 8 on it, due to some reasons that she wanted to have Windows 7 installed on it, which was pretty easy.

  Trouble came with the installation of the Symantec touchpad, after installing the drivers, it worked for about 10-15 minutes but then it stopped working.

  Tried to uninstall and install again but no luck, found a few discussions where it was suggested to remove all the devices, remove the battery and the power cord.

  Press the power button for 15 seconds and then power back on but still not lucky (I wasn't in the restoration of the default settings of the Bios I did not any change it outside disabling secure boot and replacing UEFI CSM that was needed to run win 7 on it).

  Tried about 4 different sources when it comes to the drivers but still does not work. I checked the Device Manager Dev but see no conflict, and it shows that the unit works fine but the problem persists. Please note that the drivers were specific to windows 7.

  Please if you have any suggestions we would greatly appriciate it.

  On another note, I'm not able to install the bluetooth it (HW ID shows as ACPI\TOS6205), I tried to install it several times but no luck because it always shows as unknown device in the dev Manager. The driver that I use is Bluetooth Filter Driver Package as info.

  Also, the computer is slower than it was with Windows 8, I suspect the reason for this is the fact that the installation of win 7 I accidentally erased part of the hybrid drive SSD (the size was 11.2 GB if I remember correctly, yes silly me...). I wasn't looking for a while on the net to see if there is a way to fix it but no luck so far.

  Thank you very much for your time and your suggestions!

  Tony

  With regard to the question of the touchpad.
  To my knowledge, the touchpad should work even if the Synaptics touchpad driver has not been installed. Windows system contains own driver that control the touchpad and provide standard settings. Of course after installing the Synapatics driver, you should get a few more options and features more touchpad.

  I recommend you to download the driver for the touchpad from Synaptics driver page and install it again: http://www.synaptics.com/resources/drivers

  With regard to the problem of BT.
  The laptop supports WLan Intel (Intel Wireless-N 2230) card that supports BT connectivity. Bt driver filter pack is ONLY necessary if you laptop would use an Atheros WLan card or Realtek WLan card. For the Intel WLan modules such package of filter is NOT necessary. To get BT to work, you must install the battery Toshiba BT!