Satellitr L50D - screen remains blank after standby

Similar Questions

• Satellite P500 - screen remains blank after updating BIOS 2.90

  I installed the new WOOD update through the station of service and after restart, the screen remains blank (out of service)?

  Any suggestions?

  Hello

  And on the external monitor you see a photo or not?

  In my opinion, something goes wrong during the update of the BIOS, and so the entire computer doesn t start anymore. All updates are pre-tested by Toshiba, so I doubt that only the screen isn't working anymore.

  You should try to remove the battery and unplug the AC adapter for an hour. Then install the battery and plug in the AC adapter. Make sure the battery is fully charged and then try to start your laptop.

  It's working now?

• Satellite Pro P300 - screen remains blank after power on

  My Toshiba Satellite Pro P300 power on, the screen remains blank.

  Can someone please help?

  Looks like a FL. inverter problem
  I doubt that you could replace is it s a job to a service technician.
  The FL Inverter control the backlight of the screen and if it s faulty, you will see everything as behind a thick fog

• Qosmio G30 - screen remains blank

  Pc guru please show me the age of enlightenment:

  When I turned on the laptop, she had that familiar noise (music) for Window Vista Home Premium in the background and the screen remains blank. I pressed F8 during the newspaper but made no difference (no native mode display).

  Then I put the recovery DVDs and you press F12 by following the instructions in the menu product and still no effect.
  Is there a problem on the laptop - infection by the virus or malfunction of the graphics card?

  This is the first problem since I bought it two years ago.

  Hello

  Is that means the screen goes black all of a sudden without any reason?
  If so, it is difficult to say why this is happening. You can connect an external monitor to the identity of the problem.
  Check it!

  Normally after the installation of recovery everything should work properly. Otherwise, it seems to be a hardware problem :(

• Libretto 50ct unbootable - screen remains blank

  Hello

  I have a 50ct booklet and it no longer starts. I hear the hard drive, but the screen remains blank. But if I push the powerbutton in combination with F12, then he comes in Flash mode. And if I push the BIOS disk, then it reads, and the laptop no longer responds. I can only access this part of the laptop... Nothing else.

  I tried the boot disk in flash mode, but it does not work. And I can not come in the BIOS setup. F1, ESC, space and other important keys doesn't help either.

  The computer has a jumper to reset or something on the motherboard?

  Any help is welcome! Thank you!

  First of all, it would be nice to know what you did on the booklet.
  Have you tried to update the BIOS before the question that's happened?

  It seems that the BIOS update procedure is wrong and the computer laptop doesn t work properly.
  Have you checked the BIOS update document before starting the procedure?
  You should know that the bad BOS or / and wrong BIOS upgrade procedure may damage the motherboard. In this case there aren't there things to do and you should contact the service partner in your country.

• Satellite Pro L300-21F does not start and the screen remains blank

  L300-21F is aged 18 months, so out of warranty. When you press the power button, you can hear the fan and a "click" but the hard drive does not start and the screen remains blank. The power and the battery on the headlight LEDs, but the switch light does not work. I checked the power supply and it is 19.3V and substituted a good known. Removed the battery, tried with just the power cord and still nothing. Pressing ESC or F2 when you press the button power does not bring to the top of the screen of the bios or any other message. I have concluded there is no power the jury. A friend he had its technology take a look and he concluded Council is probably a friend.

  So my questions are:
  1. He's probably right?
  2. is it a common problem with an easy solution?
  3. what else can do before shelling out for a new Board of Directors?
  4. is there a link where I can find how to disassemble the case?

  Any help appreciated

  Hello

  > 1. He's probably right?

  Yes, it looks like motherboard failure

  > 2. Is this a common problem with an easy solution?

  If it's a motherboard problem, the whole motherboard is replaced. Quite expensive part...

  > 3. What else can do before shelling out for a new Board of Directors?

  I don't think you can do anything with fried mobo

  > 4. Is there a link where I can find how to disassemble the case?

  Take a look at the site called irisvista.com

• Qosmio X 770 turns on but the screen remains blank

  So my Qosmio X 770 turns on but the screen remains blank, it was randomly turning every so often, but now it is just blank.

  The hd works fine again, I tried to plug it into a TV to see if it works, but no signal is found. I was informed by a friend that it could be a problem with the graphics card, I wonder if it can simply be exchanged if I buy a new one or if he joined, and I have to replace the whole motherboard?

  Any help would be appreciated.

  Even if the HARD drive is faulty, the laptop should be able to IT and you should see the home Toshiba on the internal display screen.
  If its definitely NOT drive HARD problem.

  You said that you have connected the laptop to the TV. You see the start of Toshiba on the external monitor (TV) screen? Are you able to access the BIOS by pressing F2?

  If this is not the case, there is certainly a hardware problem.
  It could be a fault of memory modules, graphics card or the same motherboard malfunction could be possible.

  GPU problems or the motherboard, the whole motherboard must be replaced and that's expensive fix because mobo belongs more expensive laptop.

• I had checked "extend my desktop to this monitor". I have only 1 monitor though. Now the screen is empty. I rebooted the pc in the hope to go in safe mode but the screen remained blank.__How can I go back to single screen? __

  I had checked "extend my desktop to this monitor". I have only 1 monitor though. Now the screen is empty. I rebooted the pc in the hope to go in safe mode but the screen remains blank.
  How can I go back to single screen?

  Hi Bilipino,

  You have more than one display card? Try to connect your monitor to the another card and see if you can get the display.

  Reference: http://www.microsoft.com/windowsxp/using/setup/hwandprograms/monitors.mspx

  I hope this helps...

• HP Pavilion g7-1261nr turns on but the screen remains blank

  I turned on my HP Pavilion g7-1261nr the other day, and the fan ran hard, as well as the caps lock and number lock LED flashes once every two seconds. The screen remains blank during the process. Could someone help me with this problem please?

  PcMatic I invite you to read the links provided, because they are there to help.

  If you entered my link, you would have seen this:

  Caps Lock/Num Lock LED component tested error Condition

  LED flashes 1 time CPU CPU not functional

  2 times for BIOS BIOS corruption failure LEDs blinking

  LED flashes 3 times non-functional Memory Module error

  LED flashes 4 times Graphics Graphics controller not functional

  Map of 5 times the system board failure system general LEDs flashing

  Authentication failed for the BIOS BIOS 6 times blinking of the LEDs

  According to the times that they blink, of what I mean, it's once and then a pause. Which would indicate that the CPU is broken.

  Only a repair can fix that.

• My laptop remains blank after pressing the power button

  Hello.. Please I really need help on how to repair my laptop. a lenovo ideapad s40. The problem started out as occasional BSOD. Then he started turning it back on while it is used frequently and finally it crashed. I restored system jointly, but that did not fix it. I resorted to the refreshing it still was not the answer. Then I reset the system losing all my data but the problem persists. When the power button is depressed now, the screen remains blank, but you could still hear the rotation of the fan system. Please I really need help with this issue.  As I said, it's a Lenovo ideapad s400. operating system Windows 8, 4 GB Ram, 500 GB of hard drive capacity, Radeon graphics card. https://onedrive.live.com/redir?resid=BF0101CC285F8D47! 106 & authkey =! ACoA6t1Ih_cqx3s & ithint = the file % 2czip a link to the dump files.

  The debugging session: Mon 20 Oct 08:53:10.352 2014 (UTC - 05:00)

  Error checking 117, {fffffa80085e0010, fffff8800401f28c, 0, 0}

  WARNING: Unable to verify timestamp for atikmpag.sys
  ERROR: Module load completed but symbols can be loaded for atikmpag.sys
  Probably caused by: atikmpag.sys ( atikmpag + c 928)

  Follow-up: MachineOwner
  ---------

  Loaded symbol image file: atikmpag.sys
  Image path: atikmpag.sys
  Image name: atikmpag.sys
  Timestamp: Thu Aug 14 21:10:45 2012 (502AF715)
  CheckSum: 00061A 50

  This accident was caused by your ATI/AMD display driver.

  Update the driver from here: http://support.lenovo.com/us/en/products/laptops-and-netbooks/ideapad-s-series-netbooks/ideapad-s400-notebook/downloads/DS031962

• Satellite A100-495 - screen remains black after switching to food

  After feeding, the screen remains black, the computer no longer works.

  What can I do, why?

  > After the transition to power, the screen remains black, the computer no longer works

  It works fine on battery?

• Satellite L670 - screen remains black after sleep mode

  I recently bought a L670. When I close the laptop, it goes into sleep mode. No problem with that. But when I opened the laptop again the screen remains black.
  I see on the drive activity light that the laptop come out of sleep mode correctly, but the screen remains black.

  I don't have this problem when the sleep mode is only a few minutes. Then the screen comes up correctly.
  But for example after an hour of sleep mode... no screen.

  I'm doing something wrong?

  Thanks in advance for your feedback.

  Hello

  I recommend the update to the BIOS and the display driver.
  It helped to solve a similar problem on my old laptop.
  Maybe it helps in your case.

  Good luck

• G62 screen remains black after the windows logo

  Hello

  I have a HP G62-b05SD. I noticed that many people have the problem of simmular.

  I know what makes, but don't know how to fix it.

  So here it is.

  Sometimes when I boot / reboot system screen turns black after the windows logo, but if I wait a while, I do not hear the star tune up windows, but the screen remains black.

  I noticed that this happens when I shut down or restart the system with a usb port (be it a mouse or a stick is not serious)

  If I all out en usb port restart or turn on the machine for the first time this day here, everything starts well.

  So there must be some driver problems I think with usb ports and the screen or something.

  Help, please!

  HP G62-b05SD

  Windows 7 64-bit

  Intel i3

  ATI mobility radeon graphics card

  Ow and when I get the black screen, the hard reset does not always work.

  I also did a startup repair and it showed:

  "If you have recently attached a device to this computer as a camera or portable music player, remove it and restart your computer. If you continue to see this message bla... bla... bla... "

  I hope you can help.

  Hi Frosty1984,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP G62 - b05SD Notebook and having problems with the starter. Here is a link to BIOS update.

  What is the USB device that is at the origin of the questions?

  Thank you.

• My screen remains black after I wake my computer confirmation form.

  When I wake my computer, the status light on the power button stops flashing and lights up, indicating that my computer is no longer in standby mode. The screen remains dark, however, and I don't know if the sound works, but all I can do is do a hard restart. It is very annoying and I'm afraid it will damage my computer. Help, please.

  I read something on a fix for a similar problem on Microsoft Community, but I don't know if that is the solution (I remember that patches were potentially dangerous) and it is still a time to me. Another solution, I found was to update my driver, but depending on the devices I already have the latest version of the driver for my screen.
  If you could help me out or give me a link to the fix, I would appreciate it a lot.
  I have a G-62 HP laptop running Windows 7 64 bit, I installed on an ISO downloaded with a product key, I bought. My graphics card is AMD Radeon 4200.

  Video card problems are the most common cause of this problem.

  Try the following troubleshooting procedures in the order. If the steps described in the first procedure does not resolve the problem, continue to the next procedure.

  Reinstall your video driver

  1.
  Right-click the taskbar, and then click Start Task Manager.

  2.
  Click on the processes tab, click explorer.exe, and then click on end process.

  3.
  Click file and then click New task (run).

  4.
  In the text box open, type explorer.exe, and then click OK.

  5.
  Click the Start button, type in the box Device Manager search and then, in the search results, click on Device Manager.

  6.
  Double-click Display adapters, right click the display device, click Update driver software, and then follow the steps in the wizard that appears.

• Satellite P100: screen remains black after the awakening of the mode standby

  Hello!!
  Can someone help me with this problem?
  I update my bios [V3.30] 12.22.2006 and now I have a problem.

  When I put my laptop P100 in stand by and I return my screen no longer works! I push every button on my keyboard, I move my mouse but nothing.
  Only one solution to come back is to close my laptop and reopen after that.

  What to do? Please help me if you have any ideea!
  Best regards to all!

  Hello

  I hope that you used the good BIOS.

  Have you tried to update the graphics driver? Not? Then do it!