Libretto 50ct unbootable - screen remains blank

Similar Questions

• Qosmio G30 - screen remains blank

  Pc guru please show me the age of enlightenment:

  When I turned on the laptop, she had that familiar noise (music) for Window Vista Home Premium in the background and the screen remains blank. I pressed F8 during the newspaper but made no difference (no native mode display).

  Then I put the recovery DVDs and you press F12 by following the instructions in the menu product and still no effect.
  Is there a problem on the laptop - infection by the virus or malfunction of the graphics card?

  This is the first problem since I bought it two years ago.

  Hello

  Is that means the screen goes black all of a sudden without any reason?
  If so, it is difficult to say why this is happening. You can connect an external monitor to the identity of the problem.
  Check it!

  Normally after the installation of recovery everything should work properly. Otherwise, it seems to be a hardware problem :(

• Satellite P500 - screen remains blank after updating BIOS 2.90

  I installed the new WOOD update through the station of service and after restart, the screen remains blank (out of service)?

  Any suggestions?

  Hello

  And on the external monitor you see a photo or not?

  In my opinion, something goes wrong during the update of the BIOS, and so the entire computer doesn t start anymore. All updates are pre-tested by Toshiba, so I doubt that only the screen isn't working anymore.

  You should try to remove the battery and unplug the AC adapter for an hour. Then install the battery and plug in the AC adapter. Make sure the battery is fully charged and then try to start your laptop.

  It's working now?

• Satellite Pro P300 - screen remains blank after power on

  My Toshiba Satellite Pro P300 power on, the screen remains blank.

  Can someone please help?

  Looks like a FL. inverter problem
  I doubt that you could replace is it s a job to a service technician.
  The FL Inverter control the backlight of the screen and if it s faulty, you will see everything as behind a thick fog

• Satellite Pro L300-21F does not start and the screen remains blank

  L300-21F is aged 18 months, so out of warranty. When you press the power button, you can hear the fan and a "click" but the hard drive does not start and the screen remains blank. The power and the battery on the headlight LEDs, but the switch light does not work. I checked the power supply and it is 19.3V and substituted a good known. Removed the battery, tried with just the power cord and still nothing. Pressing ESC or F2 when you press the button power does not bring to the top of the screen of the bios or any other message. I have concluded there is no power the jury. A friend he had its technology take a look and he concluded Council is probably a friend.

  So my questions are:
  1. He's probably right?
  2. is it a common problem with an easy solution?
  3. what else can do before shelling out for a new Board of Directors?
  4. is there a link where I can find how to disassemble the case?

  Any help appreciated

  Hello

  > 1. He's probably right?

  Yes, it looks like motherboard failure

  > 2. Is this a common problem with an easy solution?

  If it's a motherboard problem, the whole motherboard is replaced. Quite expensive part...

  > 3. What else can do before shelling out for a new Board of Directors?

  I don't think you can do anything with fried mobo

  > 4. Is there a link where I can find how to disassemble the case?

  Take a look at the site called irisvista.com

• Qosmio X 770 turns on but the screen remains blank

  So my Qosmio X 770 turns on but the screen remains blank, it was randomly turning every so often, but now it is just blank.

  The hd works fine again, I tried to plug it into a TV to see if it works, but no signal is found. I was informed by a friend that it could be a problem with the graphics card, I wonder if it can simply be exchanged if I buy a new one or if he joined, and I have to replace the whole motherboard?

  Any help would be appreciated.

  Even if the HARD drive is faulty, the laptop should be able to IT and you should see the home Toshiba on the internal display screen.
  If its definitely NOT drive HARD problem.

  You said that you have connected the laptop to the TV. You see the start of Toshiba on the external monitor (TV) screen? Are you able to access the BIOS by pressing F2?

  If this is not the case, there is certainly a hardware problem.
  It could be a fault of memory modules, graphics card or the same motherboard malfunction could be possible.

  GPU problems or the motherboard, the whole motherboard must be replaced and that's expensive fix because mobo belongs more expensive laptop.

• I had checked "extend my desktop to this monitor". I have only 1 monitor though. Now the screen is empty. I rebooted the pc in the hope to go in safe mode but the screen remained blank.__How can I go back to single screen? __

  I had checked "extend my desktop to this monitor". I have only 1 monitor though. Now the screen is empty. I rebooted the pc in the hope to go in safe mode but the screen remains blank.
  How can I go back to single screen?

  Hi Bilipino,

  You have more than one display card? Try to connect your monitor to the another card and see if you can get the display.

  Reference: http://www.microsoft.com/windowsxp/using/setup/hwandprograms/monitors.mspx

  I hope this helps...

• HP Pavilion g7-1261nr turns on but the screen remains blank

  I turned on my HP Pavilion g7-1261nr the other day, and the fan ran hard, as well as the caps lock and number lock LED flashes once every two seconds. The screen remains blank during the process. Could someone help me with this problem please?

  PcMatic I invite you to read the links provided, because they are there to help.

  If you entered my link, you would have seen this:

  Caps Lock/Num Lock LED component tested error Condition

  LED flashes 1 time CPU CPU not functional

  2 times for BIOS BIOS corruption failure LEDs blinking

  LED flashes 3 times non-functional Memory Module error

  LED flashes 4 times Graphics Graphics controller not functional

  Map of 5 times the system board failure system general LEDs flashing

  Authentication failed for the BIOS BIOS 6 times blinking of the LEDs

  According to the times that they blink, of what I mean, it's once and then a pause. Which would indicate that the CPU is broken.

  Only a repair can fix that.

• Satellitr L50D - screen remains blank after standby

  Satelite L50D-B, CPU AMD A6, AMD Radeon R4, Windows 8.1 x 64 display.

  Recovery from sleep mode screen remains empty, one led.
  Back to sleep and resume again brings back the normal screen.
  Tried all combinations in setting energy and latest AMD Radeon driver: no result.

  Thanks for providing the solution.

  Have you noticed the same problem after standby and Hibernate?

• When to leave Yahoo Mail to another site, even just for "Addresses" in Yahoo, it is impossible to come back: web address says I'm back to the Yahoo mailbox, but the screen remains blank.

  It happened for about three months.

  I just fully describe the situation, there is no more information to provide. My store of information about this issue is sold out. In my information firm, there is this problem remains. It is the truth, the whole truth, and nothing that the truth, so help me God. Me endearing to four horses run in four different directions would produce a big loser, which is useful additional information are.

  Select the reset bar of tools and commands and then click on the button changing and restart

• Re: NB 200 could not start, the screen remains blank!

  Hello

  I bought my NB200 Aug 2009, it works fine for me until about 2 weeks ago.

  One day, I turned it normally, second day morning, I tried to trun, I see that power light, plugin light, light to the top of the battery, the drive HARD light flashed once for maybe 2-3 seconds, then fade. And the screan remains off all the way.

  I tried to remove the battery, unplug, wait up to 3 hours, put it all back, still does not start.
  I also tried with different RAM, but the result remains the same.

  And the situation get worse and worse. About 2 weeks ago, when he started, after about 10 tries, I could get it early. This morning, I had to try more than one hour and finally got lucky once.

  So, is anyone having the same problem? Any suggestions?

  Please help me!

  Hello

  Akuma is right, you should contact the service center to fix it. It was purchased in August 2009 and he is still guaranteed, they will repair it for free.

  Welcome them

• Screen remains blank

  Model SVZ1311BGXXI - Win 7

  When I login, the screen stays black for about 10 seconds. Anyone knows why is this please?

  See you soon

  I think it's normal. Sometimes, it can happen.

• Pavilion 1bus50 g6: laptop does not start. Screen remains blank, but the caps lock and keys turns on wifi.

  I tried to reset and tried a new stick of memory without result. I think it's the graphics chip together, but not sure. The next step is replace the motherboard (rather than try to replace the graphic chipset) but I would like to know if the

  Flashing LED on the SHIFT key is tell me anything. It flashes 5 times, pauses and blinks 5 times and it repeatedly. Anyone knows what this means, or have any other suggestions?

  Thanx

  R.J.

  Hi @rje77,

  Welcome to the HP Forums!

  I read your post on your laptop HP Pavilion g6 and issues with flashing lights. Beep codes to listed here.

  Have you tried to reload the factory-installed BIOS configuration settings. http://ow.ly/Jsqq302g0dj.

  Let me know.

  If you want to say thanks for my efforts to help, click on the thumb to to give me a Kudos.

  Thank you.

• Satellite A300 - turn is not on, the screen remains black

  I have a laptop Satellite A300. I tried to turn it on when I got home from work and the screen remains blank. The bottom (plug, power and battery lights) turns on but the screen remains black.

  Can someone help me?

  Hello

  It of hard to say what's going wrong here, but maybe it s just a small issue that could be solved easily.
  Try this;
  Remove the battery, disconnect the adapter.
  A few hours and reconnect the two parts.
  I had this problem in the past and leave the laptop disconnected during the night.
  The next day, I connected battery and adapter A\c and the laptop worked again

  Maybe this will help you too

• Satellite L40 is power on but the screen is blank

  Can someone help me with a problem?

  I'm not a computer expert and my laptop won't do anything. If I put power turns on but the screen remains blank

  Hello

  Try this:
  -Remove the battery and unplug the AC adapter from the portable computer
  -wait for about ~ 40 min and reconnect the two parts
  -then try to turn on the laptop

  If this does not work and the laptop does not start in windows OS, then you could try to insert a bootable recovery disk Toshiba and could attempt to reinstall new OS.

  If the procedure still does not have a hardware malfunction is possible, and in this case only the authorized service provider would be able to help.

  Good luck