Scale, shrink to the size?

Similar Questions

• Scale to fit the size - Workflow Tips issue

  I am trying to establish a workflow and I need some advice.  I'm editing video shot with a Canon T2i at 1080 p 24 frames per second.  My final output will be 1280 x 720, 24 fps instead of the current 1920 x 1080.  The web is the target of this piece.  Is it better to create my sequence at full resolution and then mitigate when I got out through media encoder?  Or, is it better to create a sequence of 1280 x 720 and immediately adjust the video to the size of the image?  I lose a lot of scaling down?  I find that working 1280 x 720 in size makes it easier for some of my overlays.  Any advice you have would be greatly appreciated.

  Thank you

  Andy

  Andy,

  One should always implement a project sequence to coincide perfectly with the source of the layer footage. Then use the export settings to set the output as is necessary. If it does not match the image sequence, there will probably be questions somewhere.

  Good luck and happy you asked, before that you had done a lot of editing your project.

  Hunt

• Creating a chart that can scale up to the size of the window

  I have a project where I need to scale an image to the exact size that the window at any time. Is there someone who could help me with the code for this, I have never done anything like this before.

  Thank you

  Just reply - see my response in:

  loading an external swf for information and resize according to the browser

• Is there a way to make objects to change their scale depending on the size of the browser?

  So that in the object would be small as the browser becomes smaller and larger that it grows.

  Thank you

  Hello

  Please take a look at the following thread, you can create sensitive sites with Adobe Muse?

  You can try the suggestion of Zak.

• Default scale to the size button question frame

  I imported my media and dropped a DSLR 1080/25 clip to set my calendar and then went about moving other images in the timeline in which a large part is of different sizes to find that I missed something, the scale defaults to the size of the image button in the preferences, but when I press it I find that only new images I bring you to the project behavior in this way and all the stuff that I have already loaded in the project will not.

  Do I have to re import all my clips on the project to get them all on the scale on the line time or is there a way around this?

  You can select any number of items in a sequence, right-click on one of them and select the size of the image (or, if you have the latest version, 7.2.2 affect the size of frame, which resizes without pixelation).

• Pixelation when scaled to "scale to the size of the image?

  Hey all,.

  When I put a clip from 4 k to 'adapt to the size of the image' on a timeline of 1080 p and then it swings a bit, are there any negative pixelation/aliasing occurring as opposed to simply scaling the 4 k clip to the timeline 1080?

  In my view, that it is impossible to discern, but I was wondering if I do something wrong in my workflow.

  Thank you!

  Yes, "Scale to frame size" is destructive. If you open the effect controls panel and look at the scale parameter that you choose this option, you will see that the setting remains at "100" means that your newly reduced film is now 100% and everything above that will cause the loss of resolution.

  What you want is the much better "to the image size" option just below (in the context menu), which will scale your footage to 50%, in order to preserve your goodness in 4 K.

• Scale to the size of the image

  So I see that if I set the scale to the size of the image it dimensionnera my clips on import and I lose the high resolution... Sucks a bit

  Is in any way at all to the scale of the element when importing to the timeline? Final assembly used to do this, and it was awesome...

  I work with mixed 1080 p and 4 K images... So we are mastering 1080 p and whenever I shoot a clip of 4K I have to manually resize 50%

  Is it possible to automate this scale to 50%? The main reason I want to do with scale is some of the 4K clips that we have planned for crop... If default scale to the size of the frame that will mess up...

  Really surprised there is no easy way to do... I must be missing something...

  There is a way easier to do, but still not as easy as it should be.

  You can do a right click on the elements in the sequence and choose SETTING to the size of the image.  This will allow full resolution cropping.

  Be nice, if we didn't have that as a general preference, along the scale of intelligence.

• Default scale to the size of the image in 2015 CC

  Other issues on this subject come from 2012.  I use CC 2015.  I have preferences - default scale of size of frame check box. He has always worked in this project.  I thought that this meant simply that when you cut large images in the timeline, they automatically adjust to the size of the current image of the project. I've done several times before, and I can resize images - zoom - without loss of quality.   All of a sudden when I'm cutting the large images (JPEG, etcl) in the timeline with this project that's making them huge in the Progam monitor.  Am I missing something?

  Thank you

  Patrice

  and I can resize images - zoom - without loss of quality.

  Unfortunately this is not true. When you use default scale to the size of the image the image is set to 100%. Which means that when (zoom) amplify it exceeds 100%, resulting in a loss of quality.

  Select all of the images on the timeline, right-click and press Set to the size of the image.

  It suits them also in the chassis, but according to their original format.

  When you zoom in there is no loss (until you reach 100%).

• The content of my site is misplaced and shrunken Apple desktop devices. The browser provides information on devices, but the content do not place nor scale properly. The reason for this problem would be failure to adjust the size of the browser in Muse? I

  The content of my site is misplaced and shrunken Apple desktop devices. The browser provides information on devices, but the content do not place nor scale properly. The reason for this problem would be failure to adjust the size of the browser in Muse? I conceive on a 23 inches HD Windows desktop base. My site is displayed as it should, except on Apple desktop devices.

  This may depend on several things as if contents are pinned, scrolling is applied etc.

  Try to resize the browser preview in the Muse for verification, site url will help you to study.

  Thank you

  Sanjit

• Stage size: scale to FILL in the size of the browser

  Hello

  I want as the adapted Web page.

  I know that there is a checkbox sensitive scaling in EA

  but it is a PROPORTIONAL scale or scale-To-Fit, that I don't want.

  the <>size and the size of the stage must be equal to the size of the browser.

  Can someone let me know the scale of the scene to fill the width and height of the browser?

  Maybe you need to rephrase your question a bit because it doesn't have much sense.

  The sensitive scale checkbox dimensionnera step to fill the browser width and height - have you tried to adjust this value to the width / height / both?

  Or maybe you want to really scale all you just want to use the calculated percentages sizing and positioning to make your sensitive project without scale?

  like this: do a Responsive Web Design with edge animate - YouTube ?

• Question on the scale to the size of the image.

  So if select scale to the size of the image on 4 k sound clip now 1080... When I Zoom in on this now clip 1080, am I zoom in the film source 4 k or 1080? Also if I uncheck scale to the size of the image the 1080 images back to the 4 k?

  Thanks in adance

  You are zoom in a framework of 1080 100%, which means losing the image quality.

  In other words do not use size framesize but the framesize value, it will keep its original framesize of 4K.

• Question on "Scale to the size of the image by default"

  Hello

  I put my sequence of 1080 p at 25 fps.

  However, my source material are a mixture of 4K video and also extracts of 720 p and also some pictures.

  I noticed that if I uncheck the "Default scale to the size of the image" box, each time, I put the clips imported into the timeline, it's too big and I have to go the effect controls panel to reduce the size. It is very time consuming especially if I have a lot of 4K video clips on the timeline.

  According to me, that if I check the box of 'Default scale to the size of the image', when I put the 4K video on the timeline, it fits very well. My question is when I enlarge him to say the Pan effect, of the resolution will be downgraded compared to when I do not check the "default scale to the size of the image" box?

  Thank you

  If you use the scale to the size of the image, either in manual application or by ticking the "default image size scale" in preferences, your clips will be scaled down (in the case of the 4 K sequence) or upwards (in the case of the sequence of 720 p). In both cases, the clips on the timeline for reference the original source material, so all of the pixel content present in the 4K source, for example, is always available for you to resize.

  You will notice, however, that if you open Motion and see the scale component - it will read 100% because - the clip on the timeline has indeed been reduced to sequence frame size - making it difficult to * how the clip was be reduced or enlarged as the balance indicates the same.

  A better way to edit the clips to the timeline the clip on the timeline, and then select and right click or control click and choose the size of the image, the value and now scale will reflect the percentage reduction or expansion, so you can see how much you can resize until you start to lose resolution.

  Unfortunately, the set to the size of the image is not yet available as a default, you will need to use it manually.

  MtD

• Mobile version, do not scale to the size

  I have a website I did (www.motherducts.businesscatalyst.com). Until today, for some reason, the mobile version would scale to fit the screen of the phone. Now, I'm stuck with the problem in the attached photo. I don't remember changing anything that should affect the ability of the site across the various cell phone screens. Yesterday, I had a few problems where clicking on a button on the mobile version would be a reason any redirect you to the desktop version of this page, despite double control I had buttons to go to the correct pages without a doubt. I just seconded the buttons, then their relinked on the pages and which corrects THIS problem. But now my MOBILE version will not evolve to adapt to the size of the screen. Any suggestions? Notice how it is shifted completely to the left. It can also be difficult to see, but there is a considerable amount of white space at the bottom as well.

  

  ^^ This many white space, to be precise.

  Hello

  Check this screenshot

  

  in Muse, delete this text box empty and republish the site, this should solve the problem.

• Behaviour of the size of the image scale will not turn off

  First 8.0.1 (21) CC 2014 10.9.5 Mac.

  I worked with clips on a corresponding sequence so far. Clips are Full HD.

  Now, I want to change in a smaller sequence (1280 x 720).

  I uncheck scale to the image size option.

  Unfortunately, when I put them in the sequence of small clips they are still scaling to the image size. The movement is 100 and the clip tops out at the frame. I tried several sequences and several clips.

  I have 2 types of sequences (sequences AVCHD and GoPro) that do. My graphics (Lower 3rds and others) are NOT updated with the scale to the size of the image.

  Am I missing something? I use wrong image size scale? Is scale of the image size a property defined on the individual item at time of importation if so, that seems like a terrible idea. I would like the possibility to activate the scale of image size, enable or disable depending on the when I want.

  I just found a way to disable the behavior of scale to the size of frame on individual clips after importation. If you right-click on the item in the timeline panel, you can turn off the scale to frame size.

  This action solved the problem! I can even apply this option to multiple clips at once.

  

• Is footage Epic 5K - there a way by default "scale to the size of the image" horizontally?

  Hey there,

  So basically I have a 2 sequence of k (2048 x 854, 2.40:1 aspect ratio) and I work with 5 k Epic Full Frame footage. With "scale to the size of the image" on, it fits the image from top to bottom, leaving black space on the sides. I know that I can just step up, but it means that I have to disable the subsampling if I want without loss of quality. So what I want, it's so he can mount the frame horizontally and be able to adjust the framing from the top down. Is there any setting I can change to make this happen? Is the part of the RED workflow I'm missing?

  Thanks for reading.

  I agree with Ann, as usual.

  Stay with me on this because I have a workflow that might work for you.

  Don't forget that you can create a sequence using a size of the image that is 2048 wide, but it is large enough to display your picture video when revised downward. If the image full frame are 16:9, it would be 1152.

  Once you have this sequence, you can drop all your clips on it, their balance all by the scaling of one, copy and paste the attributes to all the rest as suggested Ann.

  Now you can simply use this sequence rather than the individual clips, so that your source media. You can chop it to everything in the Source monitor and delete sections of the sequence on the sequence of 2048 X 854. This means that you just have to use the parameters of position up and down sections, and it will be an easier than all the scale when you drop them on the timeline. Or, of course, you can create a sequence of 2038 X 1152 for each of your media clips in place, in order to keep the names right. It is up to you.

  Now, it is probably useful only if a lot of the clips work well without be moved upwards or downwards. If the center of section works well for enough of them, it probably you will save time and trouble.

  However, if you want to enter the path for almost all of them effect anyway, then it might be just as easy to their one size at a time. Although the position can be changed more easily than the scale, click on the query parameter and setting the right position in the program monitor.

  You could put three different copies of a handy clip at the front of the timeline. A cup Center, one at the top and bottom of the frame. You can copy one like that you want when you want.

  Many ways to skin this cat.