Scan PSC 2210 "warm-up."

Hello.

Product: PSC 2210 all-in-one

Operating system: Windows 7 32 bit

Error: Message "Warm up" when start scan

Any changes to the installation program or system.

It was not the first analysis of the day.

When to start to do this scan, it just hooked up with this message.

Looking around, I found an update of the firmware (HpAiOFWUpdate2_2.exe), which was supposed to solve the problem of "heat".

It running, I get the message: "a connected and powered Hewlett-Packard all-in-one that could benefit from this update of the firmware has not detected."

Since on Win7 drivers from WindowsUpdate, the original all-in-one software was not used, and it is one of the requirements for the firmware update utility.

I don't have the original CD, and it is older than Win7, then, it would be probably useless anyway.

Looking at, I found the installation wizard (hppiw.exe).

He confirmed that the drivers were installed and asked to test the scanner. He failed.

He also mentioned another tool, the "HP print and Scan Doctor" (HPPSdr.exe).

It was able to detect the problem. He told me to unplug the power cord from the all-in-one device, plug it back, turn on and restart the computer.

After the reboot, the doctor was there waiting for me to continue. He took the test again, and yet once it failed.

End of the story.

So, how can I update the firmware?

Is there another way?

Is there another solution?

Thank you in advance.

Rui Ferreira

Hi again.

Thank you for your response.

Although connect it directly to the wall socket set to solve the problem, I don't have a party immediately, mainly because it would mean that I had a bad electrical problem.

But the next day, the message "Warm up" come again once, even with the machine directly connected to the wall outlet.

During this time, I tried to find other ways to work around this problem and found one that works.

It goes like this:

Before using the scanner through the computer, I do a direct copy of the scanner to the printer without using the computer. He's never complained and made the copy without need to warm up. After that, he does all the scans, I need because it's already hot.

I now have to "Accept as Solution" while others may try my workaround.

Kind regards

Rui Ferreira

Tags: HP Printers

Similar Questions

  • Problems scanning HP psc 2210 with osx 10.9

    When you try to open the digitization of the Mac, the PSC will respond with the message "scanning" interrupted in its control panel.

    First the "Open Scanner" button is activator and the Mac will show 'the scanner warms up' and the 'wait' message reads the PSC 2210. After a minute the Mac will show "Scan reports a fault" and the PSC will show "scanning is interrupted.

    NB. update has been performed and the function of the printer works. Do not work what is the problem.

    Found a solution to the problem under: Troubleshooting > OS X Lion mountain & OS X v 10.9 Mavericks v10.8 > repair permissions write.

  • PSC 2210, scanning, and Mavericks

    Greetings,

    I am baffled by a problem with my HP PSC 2210 all-in-one device and the latest system of Mac OS X 10.9 (Mavericks).  I was able to print since the upgrade, but I am not able to scan. I have checked the software updates, reinstalled my printer through the system preferences/printers & drivers, but no analysis. The 2210 presents itself as a printer, but there is no available scanning function.

    Suggestions?

    Thank you

    Tim!

    I was just PM'ed by a colleague at HP who informed me that scanning from this printer is not supported by the Mavericks.  I'm sorry.

    You can try the VueScan software or a new printer.

  • PSC 2210 scan problems in windows 7

    Hello

    I recently upgraded to windows 7 Ultimate 64-bit, I connected my PSC 2210 all-in-one via USB and it found and the driver installed correctly, I can print and copy, but I can't scan for some reason any.

    When I try, it says "turn connect computer or install the hp software" I don't have the original CD that came with it, so I can't seem to find a solution.

    I tried all forums and downloads of software available, but does not, as I can't seem to find the right software to download the HP Imaging and photo gallery.

    Help!

    I have UST sorted, simple enough, it seems that even though sometimes some buttons do not work when the upgrade of your operating system, I didn't was start it manually from windows rather than the printer itself

    Beginning

    -Devices and printers (Panel)

    -HP PSC 2200 Series

    -Scan a document or image, hope this helps

  • PSC 2210 all-in-one: PSC 2210 all-in-one with Windows 10: ok printer but the scanner does not work


    Hey @Manu37520,

    Welcome to the Forums of HP Support!

    I understand that you have some problems with the scanning of your PSC 2210 all-in-one printer to your PC for Windows 10. The printer has no drivers for Windows 10. You will need to use a computer with an operating system prior to analyze.

    Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • Reinstall HP psc 2210 software in Windows 7, 64-bit error

    I came across a problem last week when trying to scan with my hp psc 2210.  Cannot open the HP Director and ended up uninstalling the software.  Reinstall everything, I received the following error message:

    Error 1904.Module

    c:\windows\sysWOW64\hpgwiamd.dll has no

    Register for HRESULT-2147024770.  Contact your

    support staff

    I deleted all my temporary files and tried to reinstall a couple of times and still the same error message.  Any help would be greatly appreciated.

    It's great! My grandfather worked for NASA too (one of the reasons why I ended up getting a minor in Physics).

    If you want a good all-in-one I would say something like the 6700 premium. Its price moderate, really efficient, easy to maintain and has all the features you would ever want to on a printer. It is very reliable, and I used a.

    And thank you for your patience and your diligence. I wish we could get this problem.

    If you think I've been helpful there is a star below my name on each of my posts that gives "Bravo", which is like a "thank you" on the forum. And if you feel that this problem is resolved, you can mark the post that solved it wants a Solution provided (at the bottom right of each post).

    Have a wonderful day!

  • PSC 2210

    I have a new HP Windows 7 Home Edition premium 32-bit, I connected my PSC 2210 and everything seems fine, which means that it prints and scans OK but I am unable to set the options of printing or print properties, click on these a small window appears and off immediately, can you please help. Thank you

    Hello I found an update, problem solved, thank you.

  • I have a problem with the HP psc 2210 all in one printer.

    My printer is an hp psc 2210 all-in-one

    All main buttons are flashing and the message on my reading of the printer (Remove and check cartridge) t - it means to clean?

    Hello

    Equip your number of printer model to this site of HP drivers and support for this information and follow the troubleshooting steps for it.

    http://WWW8.HP.com/us/en/support-drivers.html

    Or ask in the Forums of HP's Support.

    http://h30434.www3.HP.com/PSG/

    See you soon.

  • HP psc 2210 Align cartridges error code

    Replace cartridge HP56 with HP on my HP psc 2210 printer. It keeps flashing "align cardtridges. Even though I've lined up the catridegs now 10 times, the printer will not allow another function. Child1

    http://welcome.HP.com/country/us/en/contact_us.html

    Contact HP directly on the link above.

    http://welcome.HP.com/country/us/en/contact_us.html

    Alternatively, try the Support Forums.

    See you soon.

    Mick Murphy - Microsoft partner

  • PSC 2210 adjustable upward as a network to a Windows & XP PC printer?

    HP psc 2210 all-in-one

    C8658A

    1 PC running Windows 7 and 1 PC running XP can be found on the network

    [Personal information]

    Hi QuiltyKathy,

    The printer does support the USB connection to the computer. In order to print from another computer, you can use the sharing of printing to share the printer. See the following link to view you must share a connected USB printer from XP to Win 7.

    http://helpdeskgeek.com/Windows-7/XP-to-Windows-7-printer-sharing/

  • PSC 2210 remove and check cartridge

    I bought this printer on eBay and when it arrived I installed the cartridges and received this message "remove and check cartridge". I removed and cleaned the cartridges as specified on the HP website. I also installed well known cartridges of an another PSC 2210, without success.

    The seller assures me that it worked before its release.

    I fixed it. There's a paw to spring in the cartridge holding mechanism and it broke to the left side. I was able to scavange the part from a printer of donors and I is no longer the message "remove and check cartridge".  He now faces a problem in the process of cartridge align, but I will address that in another thread. Thank you.

  • Bought a new computer with windows 7. "psc 2210 all-in-one ' will not work with it....

    I have a psc 2210 all-in-one printer that I love. I bought a new computer with Windows 7 and I can't make it work. The HP site said that I don't have to download the drivers because windows 7 has already installed, but the main thing is that I can't make it work. Anyone, please help. My printer works perfectly and I can't afford to buy another. (I have a 64 bit)

    HP should contribute to this situation. I'm a loyal customer of Hp, but it's ridiculous that they do not create a driver to work with their printers.  All computers are coming with Windows 7.  HP please find a solution!

    I could get my HP PSC 2210 all-in-one to print!  I don't know exactly, because I've tried everything I could think of.  My son is a computer on which it has upgraded to windows 7 (64-bit) several months ago - he was able to successfully print on my printer immediately.   I just did an install complete (I bought the full version, not upgrade) to windows 7 (64 bit) - a couple of days and I'm finally to the point where I'm trying to connect printers.  Here is what I tried... again, I tried several things, although I've been in that general area...

    connect the printer to the computer

    go to the CONTROL PANEL--> Device Manager

    Click the arrow to the left of the IMAGING DEVICES (to be developed)

    RT click on printer PSC 2200 (should be listed under imaging devices)

    Select PROPERTIES--> DRIVER, then uninstall

    Select / tick "remove the driver for the device.

    the printer will disappear from the Device Manager (and peripheral Imaging also if it was the only selection)

    Unplug the printer to computer

    re - connect the printer to the computer

    Device Manager automatically updated (takes a few minutes, the screen refresh let until the yolk! disappears).

    Go to the control panel--> devices and printers

    Select printer PSC 2200, select Customize your printer, then the printed test page

    I hope that you will get a valid test page.  If this is not the case, another option I tried was:

    Through the above scenario.  When you get to the step "select PROPERTIES--> DRIVER, then uninstall" Select UNINSTALL directly from this menu (be sure to select/check "remove software pilot")

    Continue with the remaining steps above.

    I also tried 'Update Driver' of one of the previous screens above... I would like to know if you have a bit of luck!   I'm sorry that's not accurate.  Yet once, I tried everything I could think of, and something finally worked!  (I don't think I tried to 'Turn off the pilot')   Good luck! .........

    ).

  • in Windows 7 How to check on HP PSC 2210 all-in-one ink levels?

    With Win 7 drivers (and), what is the way to check the ink level in a PSC 2210?

    Thank you!

    [Personal information] HE DIDN'T THERE HAS NO HP PRINT DRIVERS ALLOWED THE WINDOWS PLATFORM 7!  No, natta!

    Installation of the printer software in Windows 7 for wired USB (to READ)

    http://support.HP.com/us-en/document/c01796879

    'Introduction '.

    The drivers for your HP product are already included in the new Windows 7 operating system. You don't need to download the drivers to use the product . Simply connect the printer to your computer with a USB cable, and Windows Update automatically installs the driver for your product. »

  • HP psc 2210: clear jam on my hp psc 2210 all-in-one printer

    The lights on my printer and the message says: "open the door.  "Clear carriage jam, and then press ENTER.  I do not see a "jam", opened the door and press enter several times.  I still can not reset unplugged machine from one day to the next.

    I think the cartridges are "stuck" on the side of the machine and they are unable to drag in the middle.  Can someone tell me how to fix this jam?

    Would be very grateful for the help!

    Renee'

    Hi @sreneecesand welcome to the Forums of HP!

    I see that you are having problems with jam.  I would like to help!

    I recommend starting by remove (if possible) ink cartridges and perform a power reset the printer.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

    I would also say to following the steps outlined in this document:

    A display of the Error Message of "open door, clear transport jam, and then press enter" for HP PSC 2170 2100 and 2210 all-in-One Series Printer "

    Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

  • HP psc 2210 all-in-one

    I get the error message that another program has control of the device when I scan. I don't know what would be the program. Before that happens, I was going to print a document and canceled about the 2210 before he could print because I noticed was the wrong document. So since then, I get this message. Does anyone know how to reset this machine?

    Try this:

    •Debranchez power cord

    •Press and hold the power button for 20 seconds (while the power cord is disconnected)

    •relacher button

    •Connectez the power cord rear

Maybe you are looking for