PSC 2210, scanning, and Mavericks

Similar Questions

• PSC 2210 scan problems in windows 7

  Hello

  I recently upgraded to windows 7 Ultimate 64-bit, I connected my PSC 2210 all-in-one via USB and it found and the driver installed correctly, I can print and copy, but I can't scan for some reason any.

  When I try, it says "turn connect computer or install the hp software" I don't have the original CD that came with it, so I can't seem to find a solution.

  I tried all forums and downloads of software available, but does not, as I can't seem to find the right software to download the HP Imaging and photo gallery.

  Help!

  I have UST sorted, simple enough, it seems that even though sometimes some buttons do not work when the upgrade of your operating system, I didn't was start it manually from windows rather than the printer itself

  Beginning

  -Devices and printers (Panel)

  -HP PSC 2200 Series

  -Scan a document or image, hope this helps

• PSC 2210 remove and check cartridge

  I bought this printer on eBay and when it arrived I installed the cartridges and received this message "remove and check cartridge". I removed and cleaned the cartridges as specified on the HP website. I also installed well known cartridges of an another PSC 2210, without success.

  The seller assures me that it worked before its release.

  I fixed it. There's a paw to spring in the cartridge holding mechanism and it broke to the left side. I was able to scavange the part from a printer of donors and I is no longer the message "remove and check cartridge".  He now faces a problem in the process of cartridge align, but I will address that in another thread. Thank you.

• Need drivers all in one HP PSC 1610v scanning and printing under OS 10.8.5

  I got a G4 MacPowerBook operating an all-in-one HP PSC 1610v and when my G4 died I replaced it with a MacPowerBookPro 10.8.5 OS and now my HP 1610v all-in-one works as a scanner.  I tried to download software drivers on the HP web site to correct the problem, but have been unable to do.  Can anyone suggest a fix or workaround?  IowaLocalBoy

  We will uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press on and press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall, it IS the Option of the scrubber, no button is labeled "washer".
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• PSC 1210 all-in-one: hp psc 1210 order copy but scan and print

  Until recently the copied PSC 1210, scanned and printed.  It copies is no longer in black & white, or rather when I press the copy button, the scanning starts and the printer prints a blank page.  Without moving anything, I can scan the document (Windows Fax and Scan) and print it using the same PSC 1210 and it prints perfectly.  A color copy prints a few characters in blue/green.  No recent change in hardware or software (other than the Microsoft updates).

  Hi @will-not-copy,.

  Maybe the problem is related to the ink, especially the black ink. If I understand your description that you can scan and print again, but you are unable to copy. Copying and scanning use the same hardware components so ideally if we work so should the other. Copy and print using the same ink system so if you can print, you should be able to copy; However, the impression of the computer may produce a composite black, which means that the colors combine to make black, when copying the printer can pull out the black cartridge to produce black. That's what I mean when I say that the problem might have something to do with the he black cartridge.

  I would like to print a self-test report to see if the printer hardware can produce black ink in stand-alone mode. To print a report, use the following steps:

  1. Load the plain, white paper into the paper tray.

• Problems scanning HP psc 2210 with osx 10.9

  When you try to open the digitization of the Mac, the PSC will respond with the message "scanning" interrupted in its control panel.

  First the "Open Scanner" button is activator and the Mac will show 'the scanner warms up' and the 'wait' message reads the PSC 2210. After a minute the Mac will show "Scan reports a fault" and the PSC will show "scanning is interrupted.

  NB. update has been performed and the function of the printer works. Do not work what is the problem.

  Found a solution to the problem under: Troubleshooting > OS X Lion mountain & OS X v 10.9 Mavericks v10.8 > repair permissions write.

• Scan PSC 2210 "warm-up."

  Hello.

  Product: PSC 2210 all-in-one

  Operating system: Windows 7 32 bit

  Error: Message "Warm up" when start scan

  Any changes to the installation program or system.

  It was not the first analysis of the day.

  When to start to do this scan, it just hooked up with this message.

  Looking around, I found an update of the firmware (HpAiOFWUpdate2_2.exe), which was supposed to solve the problem of "heat".

  It running, I get the message: "a connected and powered Hewlett-Packard all-in-one that could benefit from this update of the firmware has not detected."

  Since on Win7 drivers from WindowsUpdate, the original all-in-one software was not used, and it is one of the requirements for the firmware update utility.

  I don't have the original CD, and it is older than Win7, then, it would be probably useless anyway.

  Looking at, I found the installation wizard (hppiw.exe).

  He confirmed that the drivers were installed and asked to test the scanner. He failed.

  He also mentioned another tool, the "HP print and Scan Doctor" (HPPSdr.exe).

  It was able to detect the problem. He told me to unplug the power cord from the all-in-one device, plug it back, turn on and restart the computer.

  After the reboot, the doctor was there waiting for me to continue. He took the test again, and yet once it failed.

  End of the story.

  So, how can I update the firmware?

  Is there another way?

  Is there another solution?

  Thank you in advance.

  Rui Ferreira

  Hi again.

  Thank you for your response.

  Although connect it directly to the wall socket set to solve the problem, I don't have a party immediately, mainly because it would mean that I had a bad electrical problem.

  But the next day, the message "Warm up" come again once, even with the machine directly connected to the wall outlet.

  During this time, I tried to find other ways to work around this problem and found one that works.

  It goes like this:

  Before using the scanner through the computer, I do a direct copy of the scanner to the printer without using the computer. He's never complained and made the copy without need to warm up. After that, he does all the scans, I need because it's already hot.

  I now have to "Accept as Solution" while others may try my workaround.

  Kind regards

  Rui Ferreira

• HP Envy 5530 PSC: HP ENVY 5530 PSC will not scan and save on my desktop directly from the PSC. Help!

  Help, please! My printer/scanner/copier device will scan is no longer documents if you ask the PSC analysis directly. It will scan and I would like to save the scan on my computer if I open the icon Wizard HP printer on my desktop computer and it asks from there. Nothing has changed on this computer or PSC recently and the PSC makes still copies very well.

  When I request the analysis of the PSC, here is the error message that appears: "connection error. The computer does not respond. Check if the USB cable is attached or wireless is working properly, and then try again. »

  Some info:

  The PSC shows that it is connected to the computer and I checked the connections and everything is physically connected. I also update the PSC. The PSC is certainly connected to the internet (and without wire - the light blue, no flashing lights). I have Webroot Anywhere Secure protection for my desktop computer.

  I checked the forums here and I do not see a response. Some of the help documents are dead end links so that does not help.

  I'm not sure if this is a permanent solution, but finally, I finally solved this problem.  I decided to first unplug and then plug in my router. Then I unregistered and registered with Windows 10, your previous recommendation. Then I started from scratch - unplugged everything related to the CFP and also deleted the previous PSC software installed on the computer. Then I plugged in the printer and re-downloaded software. Tested to request a scan of the PSC and it worked - double checked by stop and to remit all running and I tried to request a scan of the PSC again and it worked again. So, it seemed to be a combination of renewal with Windows 10 and setting up of the PSC from scratch, to solve this, at least for me. Thanks for your patience! I don't think something regarding my download Windows 10 had something to do with mess up the signal from the PSC to the computer and I had to put fresh once again.

• I have a hp psc 1350 all-in-one. I would be able to scan and transmit in color?

  Let me be more optimistic. How can I scan and upload a picture in color? Rkght now I get only a black and white photo.

  I know what "Congratulations" means, but I do not understand what the word means when it is added to my ad. In any case, I thought about how to digitize and transmit images in color. It's easy. Now, maybe different printers or operating systems would do it differently, but for my hp psc 1350 all-in-one, my iMac and my Mac OS 10.6.8 you do it like this:

  (1) click on the print icon in the dock. A hp psc 1350 all-in-one window will appear.

  (2) to the top of the window of all-in-one hp psc 1350 on the right side, you will see the word "gender".

  (3) click on the double triangles after 'genre' to open the drop down menu.

  (4) select 'colour' in the menu dropdown.

  (5) click "scan" at the top and right of the window of all-in-one hp psc 1350.

  (6) you can take it from there. I did, and I'm really bad at this kind of tning.

• PSC 1610 now scans and copies black Uni. Prints very well.

  My HP PSC 1610 all-in-one lost the feature since I replaced my iBook G4 with OS X 10.4.11 on an iMac with OS X 10.7.1.  Scanned using Capture of Image Preview images are black.  Copies made on the PSC are also black.  I noticed that the first use of these features with my new iMac, but the problem could date back to before the computer change because I scan and copy is rare.  Is there a way to determine if this is a software problem or a hardware problem with the bed scanner PSC?

  Well, we could reset the system to the printer by unplugging the power supply on the back for 30 seconds (do not turn the printer off first), then plug back in and turn on.

  If it still does not work, its probably time for a new printer.

• Reinstall HP psc 2210 software in Windows 7, 64-bit error

  I came across a problem last week when trying to scan with my hp psc 2210.  Cannot open the HP Director and ended up uninstalling the software.  Reinstall everything, I received the following error message:

  Error 1904.Module

  c:\windows\sysWOW64\hpgwiamd.dll has no

  Register for HRESULT-2147024770.  Contact your

  support staff

  I deleted all my temporary files and tried to reinstall a couple of times and still the same error message.  Any help would be greatly appreciated.

  It's great! My grandfather worked for NASA too (one of the reasons why I ended up getting a minor in Physics).

  If you want a good all-in-one I would say something like the 6700 premium. Its price moderate, really efficient, easy to maintain and has all the features you would ever want to on a printer. It is very reliable, and I used a.

  And thank you for your patience and your diligence. I wish we could get this problem.

  If you think I've been helpful there is a star below my name on each of my posts that gives "Bravo", which is like a "thank you" on the forum. And if you feel that this problem is resolved, you can mark the post that solved it wants a Solution provided (at the bottom right of each post).

  Have a wonderful day!

• PSC 2210

  I have a new HP Windows 7 Home Edition premium 32-bit, I connected my PSC 2210 and everything seems fine, which means that it prints and scans OK but I am unable to set the options of printing or print properties, click on these a small window appears and off immediately, can you please help. Thank you

  Hello I found an update, problem solved, thank you.

• PSC 2210 all-in-one: PSC 2210 all-in-one with Windows 10: ok printer but the scanner does not work

  
  

  Hey @Manu37520,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the scanning of your PSC 2210 all-in-one printer to your PC for Windows 10. The printer has no drivers for Windows 10. You will need to use a computer with an operating system prior to analyze.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP psc 2210: clear jam on my hp psc 2210 all-in-one printer

  The lights on my printer and the message says: "open the door.  "Clear carriage jam, and then press ENTER.  I do not see a "jam", opened the door and press enter several times.  I still can not reset unplugged machine from one day to the next.

  I think the cartridges are "stuck" on the side of the machine and they are unable to drag in the middle.  Can someone tell me how to fix this jam?

  Would be very grateful for the help!

  Renee'

  Hi @sreneecesand welcome to the Forums of HP!

  I see that you are having problems with jam.  I would like to help!

  I recommend starting by remove (if possible) ink cartridges and perform a power reset the printer.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.
  
  I would also say to following the steps outlined in this document:

  A display of the Error Message of "open door, clear transport jam, and then press enter" for HP PSC 2170 2100 and 2210 all-in-One Series Printer "

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• I have a problem with the HP psc 2210 all in one printer.

  My printer is an hp psc 2210 all-in-one

  All main buttons are flashing and the message on my reading of the printer (Remove and check cartridge) t - it means to clean?

  Hello

  Equip your number of printer model to this site of HP drivers and support for this information and follow the troubleshooting steps for it.

  http://WWW8.HP.com/us/en/support-drivers.html

  Or ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  See you soon.