HP psc 2210 Align cartridges error code

Similar Questions

• Remove and check color HP PSC 1610 printer cartridge error message.

  Original title: remove and check color cartridge

  My printer HP PSC 1610 rpet 'Remove and check color cartridge'. After that, I press 'ok' and the message still appears. What is the problem with the printer? Thank you.

  Hey cobra10,

  Fortunately, there is an article by HP Knowledge Base that talks about this problem. Please follow the solution provided in the article below to solve the problem.

  Remove it and check [color / black / photo] error message appears on the screen of control of product and the product does not print.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message "press ENTER to align cartridges".

  PSC 2210: After having installed the new cartridge, message "press ENTER to align cartridges" will not disappear. Said HP blog Setup and hold and press Options, which does not work. HP technical support will not answer me and only offers to sell me a new printer for $99.00

  Now I am answering my own question. HP site does not say that the Options buttons and Setup must be kept pressed at the same time not independently. Now it works. It's all the support Tech had to say instead of trying to sell me a new printer and they would not. Nor would they say even here is the answer, pay US $20.00.

• PSC 2210 remove and check cartridge

  I bought this printer on eBay and when it arrived I installed the cartridges and received this message "remove and check cartridge". I removed and cleaned the cartridges as specified on the HP website. I also installed well known cartridges of an another PSC 2210, without success.

  The seller assures me that it worked before its release.

  I fixed it. There's a paw to spring in the cartridge holding mechanism and it broke to the left side. I was able to scavange the part from a printer of donors and I is no longer the message "remove and check cartridge".  He now faces a problem in the process of cartridge align, but I will address that in another thread. Thank you.

• Reinstall HP psc 2210 software in Windows 7, 64-bit error

  I came across a problem last week when trying to scan with my hp psc 2210.  Cannot open the HP Director and ended up uninstalling the software.  Reinstall everything, I received the following error message:

  Error 1904.Module

  c:\windows\sysWOW64\hpgwiamd.dll has no

  Register for HRESULT-2147024770.  Contact your

  support staff

  I deleted all my temporary files and tried to reinstall a couple of times and still the same error message.  Any help would be greatly appreciated.

  It's great! My grandfather worked for NASA too (one of the reasons why I ended up getting a minor in Physics).

  If you want a good all-in-one I would say something like the 6700 premium. Its price moderate, really efficient, easy to maintain and has all the features you would ever want to on a printer. It is very reliable, and I used a.

  And thank you for your patience and your diligence. I wish we could get this problem.

  If you think I've been helpful there is a star below my name on each of my posts that gives "Bravo", which is like a "thank you" on the forum. And if you feel that this problem is resolved, you can mark the post that solved it wants a Solution provided (at the bottom right of each post).

  Have a wonderful day!

• align cartridges HP psc 2175

  To change black cartridge - the "Press ENTER to align cartridges" message.  I can't find a way to clear the message, I think I've tried everything...  Copy / scan functions do not work - print works very well.  Suggestions?

  1 try to remove the ink cartridges.

  2. close the printer's front access door

  3. turn the printer off.

  4. disconnect the power cable on both ends of the printer

  5 wait about a minute or two.

  6 reconnect power cord then turn on printing.

  7 wait until you will be asked to insert the ink cartridge.

  8 insert the ink cartridge when you are prompted, and then follow the on-screen instructions.

  9. Insert plain white paper and follow the on-screen instructions. It should align the printer.

  Please let us know if you have any questions.

• cartridge error HP psc 1210 all-in-one

  I replaced the cartridge from the printer, cleaned and reinserted it several times. The contacts on the cartridge air clean, and the contacts inside the printer air clean.  The results are intermittent. Of course, when I remove the color cartridge I get impression black ok. I wonder if there is probably a problem with the contacts in the printer, so that even if they are clean, contacts are not deployed. Otherwise, it's a problem of internal material just with the color circuit. Or is there a way to tell. The "check print cartridge" light flashes, it is not very revealing.

  Hello Blackjackand welcome to the Forums of HP.

  First thing I would recommend would be to remvoe the cartridges and reset the power supply.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I would also follow through the steps listed in this document on Print Cartridge errors.

  If those who do not solve your problem, I'd be suggeest contacting HP directly.  You can use this Web site for information about how to contact HP properly, based on your region: contact HP worldwide.

  Please contact the HP Forums.

• Photosmart Premium Fax series: error code 11471108

  Received error code 11471108 when you try to print from my desktop Gateway computer?   JP

  Hi @toano

  I can't say what is originally this 11471108 troubleshooting error code, but I'd love to help you understand and work towards a resolution.

  Performing printing and Scan doctor could help. Printing HP and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems, including but not limited to:

  • Connectivity:

    USB: Check that the USB connection from your computer to the HP product works properly.

    Network: Verifies that the network connection between your computer and your network is working properly.

  • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

  • Driver: checks the driver missing or corrupt files.

  • Device Manager: check the problems in Device Manager that could prevent printing.

  • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

  • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

  • Port Match: check the port settings for the HP product.

  • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

  • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

  • Print settings: check and adjust the print quality settings.

  • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

  • Scan tests: check the scanning mechanism, drivers, and registry entries.

  Source:try the HP Print and Scan Doctor for Windows

  Click here to download and run the print and Scan Doctor > > www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to identify the key and check mart are in the green circle.

  • If you see only the Green checkmarks (), the tool did not find any problem.

  • If you see green sides (), the utility identified a problem and fix it automatically.

  • If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

  • If you see a red X (), follow the onscreen instructions to fix the problem.

  Thanks, I look forward to hearing back on your part.

• solution code 1203 on printer, made a mistake shows always the error code

  printer showing the solution code 1203, error owners manual shows always the error code

  andym7,

  You use brand cartridges in the printer?

  Error 1203 is an interesting error code. Here's what I discovered on error 1203

  Error 1203 is an very interesting cartridge error. This means that your overflow of cartridges of nine cartridges after a several prints or right after you filled cartridges. Check to see if the ink are smeared on the holder where the contact panel with the cartridge

  Solution:
  I use the Lint (excellent work of coffee filter) with a few drops of water to moisten and cleanse back them on my printer work and support.
  Then before you print anything, you should run aligned the cartridges once or twice then run clean cartridges a couple of times.
  Print the test page to see how it's look and the way you're going.
  Be sure to not let the debris of Lint (coffee filter work a lot on the door contact Panel.)

  Rick

• 2175 printer, a message loop "press ENTER to align cartridges".

  My HP 2175 printer looping error message "press ENTER to align cartridges".  No matter how many times I press on enter the message always appears.  I have:

  1. turn the printer off and back 5 minutes

  2 reinstall the printer cartridges

  3. change the ink cartridges

  4. disconnected from my PC and reconnected

  5. printed by the PC but standalone will not work copy and message remains.

  6. I checked the ink cartridges to make sure that the tape has not been left on them.

  7. I checked for whether ensure that this number is in the housing appropriate (ie. 57 57 and 56 in 56/58 also used a 58 cartridge in the same location).

  I have reviewed the help pages in the troubleshooting pages and HP Solution Center and are no match for this problem.  Help, please

  P.S. I am using Windows XP with the latest software updates and Solution Center is the HP PSC 2170 series.

  Message edited by clevando on 02/03/2009 07:20

  I have found a workaround to get my copies today from this location:

  http://support.HP.com/us-en/document/bpu00657

  We can close this topic.

• Oxc19a0013 error code

  I have a HP Photosmart B210e more all-in-one printer-product # CN 219.  First, I got the blank pages, then I printed a diagnostic report and it showed all colors except black.  Then received the above error code.  I have reset the printer out the cartridges and the print head.  Clean the printhead, cartridges, and the error message continues.  At one point also got an error message on the problems of print head, took out cartridges again, new and very carefully replaced print head cartridges and print head, bought a new black cartridge and still get the above error message.  The message on the print head went.  Now any suggestions?  I have Windows 7.  I hate to replace the print head and then find this does not solve the problem.  It was cheaper to buy a new printer.  Hopefully I can solve the problem, I do not like the product.  All thiis started a few weeks after I had installed a black cartridge 564XL.  Who could part of the problem?

  Hey b_4,.

  I see that you have a code 0xc19a0013 (generally ink system failure) on your HP Photosmart Plus B210.  This is normally an indication of a hardware failure in the system of printer ink, heads of printing or the internal part of the system of ink in the printer.

  I see you did a lot of troubleshooting for this problem.  There is a document that deals with this type of error, however, of troubleshooting to the B210.  I would advise to check through and making sure that all measurements are made.  The document can be found by clicking here.

  If all measurements were made, then they should consider the options at hand.  This printer is guaranteed?

  You can check the status of the guarantee of their printer by clicking here.

  If you are out of warranty, then you have more options at this stage.

  • You can buy a printhead for the HP parts store by using CN642a for the Photosmart B210 part number.  This printhead currently sells for about $ $70.
  
  
  • You can call the HP Technical Support on the upgrade program.  The upgrade program is where you can get a newer refurbished model HP printer (similar to the current model), with a full factory warranty, at a discount from the new sale price at retail.
  
  
  • You can buy a new HP printer from a retailer (it will have the same full factory warranty).

  To contact HP Technical Support:

  • If you are a resident of the United States or to the Canada, then the number to dial is 1-800-474-6836.
  
  
  • If you are a resident of a different region, then please click here to access the global contact list for HP Technical Support.

• HP DESKJET INK ADVANATAGE 3545: error message in my hp deskjet ink advantage 3545 ERROR CODE 0X83C0000A NOS_LOADER_APP

  Hello

  HOW TO GET THE SOLUTION FOR THE ERROR ON MY HP DESKJET 3545 ERROR CODE 0X83C0000A NOS_LOADER_APP

  Hello

  Please try the steps below...

  1. While the printer is on, remove the cartridges.
  2. Remove all sheets in the tray. Close the drawer.
  3. While the printer turned on, unplug the power cord from the back of the printer.
  4. Power Off the Wireless router.
  5. Wait 60 seconds.
  6. Plug the power cord of the printer.
  7. When you are prompted, install the cartridges.
  8. If the error persists, then it is a printer failure. Please call HP Tech Support for assistance.

  Support of HP technology (USA) 1-800-474-6836

• 0xc18a0106 on Photosmart c5180 error code

  I followed the recommended procedure, but the problem persists. The printer connected to a network home via the gateway.

  The printer does not work and returns the error code 0xc18a0106 on the front panel of the printer and work is the removal of the (QC) all cartridges have been replaced by nine. Any proposal to resolve this situation?

  Hi demertzy,

  Just had this problem on my HP Photosmart C5180 printer.
  
  That's what I did:

  If you get an error message on your screen of the printer (HP Photosmart C5180) that says "0xc18a0106-ink system has failed", you will need to perform a reset of the printer.

  Something usually causes the error and it is generally a chip failed, an obsolete chip or break when installing a new cartridge, and this must be corrected before continuing. Most of the problems usually come from the last cartridge inserted, so start by replace this cartridge. You will also need all the cartridges with low ink in there or you will need to replace any empty before continuing. After replacing the cartridge problem, keep it as it can be allowed to use at a later date, once the error has been reset.

  To reset the printer:
  1 - Unplug the USB cable from the printer.
  2 - Press the key On / Off turn the printer power off, unplug the power cable from the printer, press and hold the 'OK' button and the 'HELP' button, then plug the power cable, wait a few seconds and release both keys, then press 'On '.
  Your printer will now initialize and you will need to follow the on-screen instructions and selection of the printer. This can take several minutes to complete. Your error code should now be gone, and you will now be able to copy and print.
  3 reconnect the USB cable from the printer.

  He has worked with me... Hope it will work for you.

  Robert

• HP officejet 7612: "There is a problem with the printer or ink system". That is the message, no error code.

  "Is there a problem with the printer or the ink system". The error message. Without error code. Original cartridges.

  HP has a center of service to Puerto Rico, where I live?

  Please tell me there is a solution for this problem.

  In the paper here troubleshooting steps can help resolve the printer ink system message justify Officejet 7612.

• New Photosmart C8180 displays error code C2FF8575 out of the box.

  I bought a Photosmart C8180 a few years back but put away in a closet and never opened until today. I started to install the printer and followed the instructions, but when I plugged on feeding (a first step in the installation program), the screen started showing the error Code C2FF8575, more a point of exlemation on the front of the machine and the power button began to blink rapidly. I have insterted the cartridges in it, but it did not help. I followed a tip of troubleshooting I found on the HP site to uninstall your ink cartridges, unplug the printer for at least 60 seconds, then plug back in. There is nothing to help as well. Please help me to solve this problem and get this printer doesn't work! Thank you!

  Hi mekshp and welcome to the Forums of HP.
  
  I see that you are having errors priner. After reviewing the error code, it seems that it is a fatal error in the firmware of the printer.  I recommend you contact HP directly.  You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide.

  Thanks for posting on the HP Forums.