HP psc 2210 all-in-one

Similar Questions

• PSC 2210 all-in-one: PSC 2210 all-in-one with Windows 10: ok printer but the scanner does not work

  
  

  Hey @Manu37520,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the scanning of your PSC 2210 all-in-one printer to your PC for Windows 10. The printer has no drivers for Windows 10. You will need to use a computer with an operating system prior to analyze.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• I have a problem with the HP psc 2210 all in one printer.

  My printer is an hp psc 2210 all-in-one

  All main buttons are flashing and the message on my reading of the printer (Remove and check cartridge) t - it means to clean?

  Hello

  Equip your number of printer model to this site of HP drivers and support for this information and follow the troubleshooting steps for it.

  http://WWW8.HP.com/us/en/support-drivers.html

  Or ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  See you soon.

• Bought a new computer with windows 7. "psc 2210 all-in-one ' will not work with it....

  I have a psc 2210 all-in-one printer that I love. I bought a new computer with Windows 7 and I can't make it work. The HP site said that I don't have to download the drivers because windows 7 has already installed, but the main thing is that I can't make it work. Anyone, please help. My printer works perfectly and I can't afford to buy another. (I have a 64 bit)

  HP should contribute to this situation. I'm a loyal customer of Hp, but it's ridiculous that they do not create a driver to work with their printers.  All computers are coming with Windows 7.  HP please find a solution!

  I could get my HP PSC 2210 all-in-one to print!  I don't know exactly, because I've tried everything I could think of.  My son is a computer on which it has upgraded to windows 7 (64-bit) several months ago - he was able to successfully print on my printer immediately.   I just did an install complete (I bought the full version, not upgrade) to windows 7 (64 bit) - a couple of days and I'm finally to the point where I'm trying to connect printers.  Here is what I tried... again, I tried several things, although I've been in that general area...

  connect the printer to the computer

  go to the CONTROL PANEL--> Device Manager

  Click the arrow to the left of the IMAGING DEVICES (to be developed)

  RT click on printer PSC 2200 (should be listed under imaging devices)

  Select PROPERTIES--> DRIVER, then uninstall

  Select / tick "remove the driver for the device.

  the printer will disappear from the Device Manager (and peripheral Imaging also if it was the only selection)

  Unplug the printer to computer

  re - connect the printer to the computer

  Device Manager automatically updated (takes a few minutes, the screen refresh let until the yolk! disappears).

  Go to the control panel--> devices and printers

  Select printer PSC 2200, select Customize your printer, then the printed test page

  I hope that you will get a valid test page.  If this is not the case, another option I tried was:

  Through the above scenario.  When you get to the step "select PROPERTIES--> DRIVER, then uninstall" Select UNINSTALL directly from this menu (be sure to select/check "remove software pilot")

  Continue with the remaining steps above.

  I also tried 'Update Driver' of one of the previous screens above... I would like to know if you have a bit of luck!   I'm sorry that's not accurate.  Yet once, I tried everything I could think of, and something finally worked!  (I don't think I tried to 'Turn off the pilot')   Good luck! .........

  ).

• HP psc 2210: clear jam on my hp psc 2210 all-in-one printer

  The lights on my printer and the message says: "open the door.  "Clear carriage jam, and then press ENTER.  I do not see a "jam", opened the door and press enter several times.  I still can not reset unplugged machine from one day to the next.

  I think the cartridges are "stuck" on the side of the machine and they are unable to drag in the middle.  Can someone tell me how to fix this jam?

  Would be very grateful for the help!

  Renee'

  Hi @sreneecesand welcome to the Forums of HP!

  I see that you are having problems with jam.  I would like to help!

  I recommend starting by remove (if possible) ink cartridges and perform a power reset the printer.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.
  
  I would also say to following the steps outlined in this document:

  A display of the Error Message of "open door, clear transport jam, and then press enter" for HP PSC 2170 2100 and 2210 all-in-One Series Printer "

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• in Windows 7 How to check on HP PSC 2210 all-in-one ink levels?

  With Win 7 drivers (and), what is the way to check the ink level in a PSC 2210?

  Thank you!

  [Personal information] HE DIDN'T THERE HAS NO HP PRINT DRIVERS ALLOWED THE WINDOWS PLATFORM 7!  No, natta!

  Installation of the printer software in Windows 7 for wired USB (to READ)

  http://support.HP.com/us-en/document/c01796879

  'Introduction '.

  The drivers for your HP product are already included in the new Windows 7 operating system. You don't need to download the drivers to use the product . Simply connect the printer to your computer with a USB cable, and Windows Update automatically installs the driver for your product. »

• Looking for 64-bit Windows 7 for old PSC 2210 all-in-one drivers

  I tried the original drivers disk provided with the printer.  No go.  I looked at the instructions on the HP site and went through all the auto install USB printer install but no go.  I tried the manual installation option, but the disc of WINDOWS 7 doesn't have the listed series 2210 virtue PSC all in his

  Hi again!

  Glad that it worked for you, fortunately, your version of Windows has the printer on the list, mine doesn't. But it can be fixed through Windows update.

• HP PSC 2210 all in one printer - print slow

  I had all this in a single printer for several years.  Recently, I tried to print two pages of a PDF file and it took more than 1 hour to print.  At first, I thought it was the PDF but now I know it's with everything that I try to print.  I went through all the troubleshooting steps, and none of them have solved the problem.

  I have a Dell Dimension 8400 computer Intel's Pentium, processor Windows XP 4 3.20 GHz, 3.19 GHz, 1.00 GB of Ram.

  It will start to print, but then it will take at least an hour to print 1 page.  I already uninstalled, reinstalled, etc...

  This is probably caused by the failure of one of your cartridges.  Remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

• Advances of paper but will not print using Windows XP, computer HP Pavilion DV6000 CTO laptop and HP PSC 2210 all in one with USB

  Communication takes place properly between the printer and the computer.

  Paper advance but not printing on the page.

  Printer copies fine.

  Pilots are underway.

  Help, please!

  Hi GraceWolf,

  You did it of any material changes or software on the computer before this problem?

  You can follow this link & check if the problem persists.

  Printer in Windows problems

  Hope the helps of information.

  Please post back and we do know.

• PSC 1610 all-in-one

  Can I e-print to my HP PSC 1610 all-in-one?

  Hi JudithAMorrison,

  Just to add some additional information for you, your PSC 1610 is not able to ePrint, as it was released before that HP has applied the ePrint technology for their printers. All new printers are usually capable ePrint, so if you are wanting to acquire a range of HP active ePrint printers, you can contact HP Technical Support at the 1-800-474-6836 and see what kind of offers, they have to get you an active ePrint printer.

  If you need anything more, please let me know. Have a great day!

• I can't scan with hp psc 1402 all-in-one

  1 hp psc 1402 all-in-one 2. Windows xp 3. Scanner not found 4. don't know 5. problem to scan only

  I want to scan hp scan doctor

• HP PSC 1315 all-in-one: error 1632: Temp folder full or inaccessible, when you try to install HP PSC 1315 all in one

  I get the following installation error when you try to install the HP PSC 1315 all in one.

  [code 1632. The Temp folder is on a drive that is full or inaccessible.

  Free space on the drive or verify that you have permission write to the Temp folder.]

  Hi @tasos251,

  I understand that you're seen a message on your temp folder is full, I'd like to help. Please follow the steps below to clean the computer and install the software;

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. Download the software and choose to save money, save it on the desktop > AIO_CDB_NonNet_Full_Win_WW_140_408 - 4.exe
  4. After that the downloaded software and extracted, open the temp folder once again, use the instructions in step 1.
  5. Locate and open the folder starting with 7z (example: 7zS2356)
  6. Open the folder Util
     
  7. The CCC folder
  8. If you have a computer HP run the L3uninstall.exe. If you have annon HP computer run the L4uninstall.exe
  9. Once the uninstall is complete, reboot the computer
  10. Follow these steps to reset the registry settings and options for Windows Installer.

• HP psc 2355 all-in-one: PSC 2355 all-in-one scan, but not print

  The printer was purchased at a garage sale may be a few years back. It scans perfectly fine, but it will not be printed. I tried searching the Web for drivers and uninstalling/reinstalling it, even the installation under another pilot as series 2300. The closest driver that appears is 2350 series. Windows Update crashes when I try to get to find the drivers more.

  Print a test page once, he hasn't done anything since then except to give me errors on the printer LCD. I have only a black cartridge in it because I don't need color, but I doubt that's the issue.

  From the looks of things, this is a common problem... I saw a post where someone has too, but nothing has worked.

  I am running a computer portable 64-bit windows 7, home premium and USB connection.

  Hey @TKStall,

  Thanks for getting back to me with the error messages.

  The value 0 x error messages you see on the screen of your PSC 2355 all-in-one indicate a hardware failure in your printer ink system. Because the errors seem to be intermittent at the moment it is you may chance using your printer for a little longer. However, there is a hardware failure occurring within the printer and for this reason, there is a chance that your printer may stop working at any time.

  Troubleshooting steps for error 0 x can be found here. But, as you can see one troubleshooting step is to perform a power reset on the machine. If the power reset does not clear the error state that a replacement of the entire unit would be necessary.

  Try to install your printer using the driver PSC 2350. However, if the error messages continue to appear on your printer, I would recommend reaching out to the Technical Support queue by phone about the options for replacement of material. Due to the age of your printer, you may have the option to update your PSC device for a newer model at a reduced price.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  It has been a pleasure to work with you. I wish you good luck going forward with this!

• HP PSC 1210 all-in-one: could not open the HP Director icon to the desktop

  I installed the CD software for this fairly old printer on my laptop Windows 10 (64-bit). Everything seems to work fine except that I can't access the HP Director. I tried to check on the resources from HP site, but it does detect not all HP products on my laptop even if the printer is plugged in and on. Also, I searched for the car and the road status update on the site of HP tools. Even if I see my printer listed on the player page, it has no download button click next to my model. I was trying to see if the drive indeed download when I installed the software.  Again I don't know even though most everything works except for no access to the HP Director. I guess that the fundamental question is whether or not this now old enough (but still very good printer) can run on Windows 10. I used it before on XP. I'd appreciate any help with any of these issues. Thanks, Peggy

  Hello

  HP Director is not intended for Windows 10.

  The original CD was made several years earlier version 10 of Windows.

  Right click on the start icon and select programs and features, and then delete any software installed client the HP of your printer.

  Install the software by following the steps below:

  http://support.HP.com/us-en/product/HP-PSC-1200-all-in-one-printer-series/90763/model/90765/document/c01796879/

  Be aware that no full functionality is available for Windows 10 since it is an older model, scan and pritn base drivers are provided by the operating system itself.

  See "I have always used the HP and the HP Toolbox Solution Center. What I use now? "in the document for more information.

  Shlomi

• PSC 1610 all-in-one printer: PSC 1610 will not print

  HP PSC 1610 all-in-one

  No including photographic paper feed and the following messages are received: paper jam or paper. This is not correct. Jam has recently replaced; all paper rolls have been cleaned up with water. Any advice would be appreciated.

  Thanks for your reply. I think you are right to say that it is a hardware sensor problem. In the circumstances, I'll buy a new printer/scanner/copier.