Scan to computer no longer works

Similar Questions

• Audio and video files that has already worked on my computer no longer works.

  Audio and video files that has already worked on my computer no longer works and I get one of the three messages which are as follows:

  (1) the file can be used (but it is not used by another program, and then media player that I use to try to read the audio/video file)

  (2) you may not have access to the location of the file (and yet I am the administrator of the computer, I am the only user with access to the computer and I installed the files myself and they have worked fine up until now.)

  (3) your proxy setting may be incorrect (I use automatically detect my proxy settings that is the same settings I use for my network and the Internet.)

  All of the files in question worked previously but now continue to show these problems. If anyone can give me any information as to how I can get these files restored to their values of work please feel free to respond below or send a personal email with your solutions to * address email is removed from the privacy *

  Yours,

  Brent

  Hi Brent,

  You can try to uninstall last updates window who installed or do a system restore to a point before the updates have been installed and then install updates one by one to see which update is causing the problem.

  Method 1:

  You can read the following article to remove an update.

  Remove an update

  Method 2:

  If you cannot uninstall the updates, then you can try to perform a restore of the system to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

  Method 3:

  Try to install updates one at a time to see the update is causing the problem.

  Install Windows updates

  Hope this information is useful.

• How to move Fireworks to another computer when bought a download like old computer no longer works

  Hi, is it possible to reinstall fireworks on another computer when the previous computer no longer works

  Thank you

  Your license allows you to have two machines with enabled facilities.  And if necessary, you can contact Adobe Support by chat and ask to reset your activations.

  Download and Installation Help-

  https://helpx.Adobe.com/download-install.html

  Downloads: http://www.adobe.com/downloads/other-downloads.html

  To request a reset if necessary:

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat

  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

• HP Deskjet 6700 Premium: Scan of the computer no longer works

  When I run a scan of my printer to the computer, I get an error message that says that there is no connection, or that the application of scanning the computer is currently in use.

  I can Scanner normally when you use the HP Scan SW initiated from my computer. I can Scanner normally the printer to a memory device to the printer.

  The HP Print & Scan Doctor SW says that everything is OK and day.

  Any ideas?

  Hello
  
  Thank you for using the HP Forums.

  YUO must ensure that you have the FULL features software installed first and then turn on computer scanning.

  If you have not installed the software FULL of features, the following resources will help you:
  
  HP printer install wizard for Windows
  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe

  How to scan to computer
  
  Once you have installed the software:
  
  1. click the printer (on your desktop) and it will bring up the HP printer Assistant.
  2. in the menu analyze, there is a 'manage Scan to Computer', click on that.
  3 make sure you have "Enable" Scan of the computer. Also, make sure that the tab "automatically start Scan of the computer when I connect Windows" is checked if you want to perpetuate this feature. (the following video will show you how)
  
  Scan to computer

  If it does not, we suggest that you uninstall and reinstall the software features FULL.
  
  Hope that helps!

• Transfer of licenses when the computer no longer works

  How can I transfer a license InDesign CS6 to another computer if the original computer it was installed on is no longer works? I tried to use the license key that I had before, where there was an extra activation to the left. However, the nonprofit, that I purchased the license through TechSoup (which provides non-profits with the reduced software), and I believe that we have received an activation because of this. When I used the old license key, it gave me the following message. What should I do to get the license on my new computer? I would try to disable the old license, but the old computer is no longer active.

  

  This isn't the error message you would see if you have exceeded your activation limit.

  in all cases, contact customer support.  cat works well: www . Adobe.com/support/cat/ivrcat.html

• OfficeJet 6500 e710n-z: scan and Fax no longer works

  Hello

  After working fine for a couple of years, scanner and fax on my Officejet 6500 functions do not work.  The print function is fine.

  Change that recent computer-wise is that I am switched to a Macbook Air (and upgraded to OS Mavericks) Macbook Pro, but all that was on my previous Mac was transferred to my Air of my LaCie support.

  When I try to scan a document, the preview function works fine but when I click on Scan, a small message says "Made scan of selected areas" but no scan is actually performed.

  When I try to send a fax, I can hear the tone on my phone line and the phone rings but the fax does not pick up.  I tried with several known fax numbers and it's always the same.  I almost never receive faxes so I can't say whether or not the receiver function works.

  Can someone advise?

  Thank you very much!

  Hi Super Dave,

  I was able to scan with the Apple Preview (even if Apple Image Capture did not work) so thank you so much for this!

  Any suggestion as to the fax?

  Thanks again!

• OfficeJet Pro 8600 N911g: MAC 10.11.2 SCAN TO COMPUTER don't WORK DO NOT OFFICEJET 8600

  I have upgraded to Mac 10.11.2 yesterday evening.  Now, I get this error.  Tried to reinstall the software and restarted the router and the computer to the printer, tried with wifi and LAN.  I guess it has to do with the update.  I can scan the Mac, but NOT the printer to the Mac.

  

  The USB cable is a successful work around.  LAN and WIFI gve the question

• HP OfficeJet Pro 8600: Analysis of the function of the computer no longer works. Get the error "User name or password Incorrect"

  It was a sudden break in the analysis of network to the e-mail function.  I have rebooted my router, unplugged my printer, etc, and nothing solves the problem.  I don't know where he wants me to change a password that I often had to change my password on the computer and it has never caused a problem with the scanner before.  I tried all the things on this very topic messages that were a few years ago. The wireless printer works etc all work fine.  It's only the scan to my email is not working.  Help, please.

  Hello. No, it wasn't the problem, but I was able finally someone at HP support who managed to solve it. It's a configuration problem after an automatic update. Thanks for trying to help though!

• HP Envy 4520: Scan to computer DOES NOT WORK even after SEVERAL installations!

  I want to scan but'm consently says "enable scan of the computer' in the settings of the printer. I go to settings, click on the "Computer Scan" menu to be told:

  "The HP software required for the Scan of the computer could not be located on this computer. Please download and install the latest HP recommended software for your device to http://www.hp.com/supportand then try again. »

  Only, I did already! I need answers.

  Welcome to the community @Anton-Cross-1 HP

  I read your post and wanted to comment. I checked the drivers on hp.com for your printer model to find out there are not full of features of updated the Sierra drivers. Of my own knowledge, complete drivers must be installed to scan from the printer to the computer.

  Maybe the Apple link below can help. In the meantime, I'm not sure as to the if or when complete drivers will be released to 10.12. You will not be able to scan using HP software, then you can try on your Mac such as Apple Preview or Capture of Image methods.

  Find the drivers here: http://support.hp.com/us-en/drivers

  Printer and scanner software for macOS Sierra, El Capitan, Yosemite, and Mavericks: https://support.apple.com/en-us/HT201465

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

• MX922 on OS 10.11.4 with Canon IJ Scan Utility installed - no longer works wireless

  I have a few multifuntions gun and have never had a problem of scanning more wireless - my new MX922 on OX 10.11.4 does scan no more wireless - when I open the utility and click on one of the icons, a black with small white corners box appears and then the software fails.  Please let me know if anyone knows a solution.

  Hello.

  Try to download the latest driver of printer CUPS, ICA Driver and Scanner Driver from our Web site to see if this will help.  If the printer is used on a network, the IJ Network Tool must be reinstalled.

  Visit the following link:

  MX922 series drivers & downloads

  If you're having trouble, find more help contact us.

• I get a blue screen says bug code using the driver. and the backup file. I don't know what to do and my computer no longer works. I have windows vista

  blue screen, error message bug code usb driver and file dumping crash how to stop it

  Hello

  1. what changes have been made to your computer before the problem?

  I suggest that you follow the steps in this article and see if the problem still occurs.

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  (Valid also for Windows 7 steps)

• Canon MP600R scanning no longer works with Windows 8

  Just upgraded to Windows 8. My Canon MP600R printer must be compatible, however the scan function will not longer work.

  Is there an easy solution?

  The upgrade wizard has pointed out that there is a solution "payd" but does'nt me more help.

  The functions of the printer are doing well.

  I experienced the same problem with a Canon Pixma MP600 and an iP2550 Pixma.

  I downloaded the Canon My Printer Windows 8 compatible version (mypr-victory-3_0_0 - ea11_2.exe) and it works, but no driver Windows 8 is available at this time for two printers :-)
  I will contact Canon Help Desk tomorrow and let you know what they're going to respond to me.

• Scanner no longer works from computer

  The scanner no longer works for the computer; It will scan the printer and transfer the file to your computer. The BONE has been recently upgraded to Windows 7 Professional; is this a coincidence?

  

  Hello bobford

  Thanks for the additional information. If you were able to locate the HPScan.exe try running it. It should be a direct link to the scanning software. Let me know if it helps to complete a scan.

• HP7520 Scan of the computer does not work, but the impression is

  I got a HP 7520 for awhile now, and I used to be able to scan to the computer without any problem.  However, after the upgrade a computer to WIndows 8 and re - install the HP software, that no longer works.  I left the office as a desktop Windows 7, but have the same problem - again, printing but wireless "computer scan" is not "work and my computers both say a scanner is not installed."  Ive tried several ways to install scanner drivers, but no dice.  Should this quite expensive multifunctional device now go on the pile of junk?  If so I'm passing to Epson - I had enough problems with the HP hardware!

  I finally understood that - why it should be so hard to find, I don't know, but thank you for having me on the right path BH - even though she wasn't quite specific instructions for my computer.

  I have Windows 7 and Windows 8 machines, but it was the same resolution for both:

  Installation of a network scanner

  1. Click here to open the. network

  2. Locate the scanner, right-click and then click on install.

  3. Follow the instructions to finish adding the scanner

     A very simple solution, but it is not easy to find, or intuitive to navigate.  In any case, my rear multifunction device works again, thank God!

• "Scan to computer is enabled no longer."

  After the upgrade to Windows 10 I continually get this message, "Scan to computer is no longer enabled.  I disabled "Scan to Computer" network printer and ran print and scan doctor and you have restarted the computer and the printer. I always get the sporadic message. It is very annoying.

  Thanks for posting on the HP Forums!

  I should be able to provide suggestions!  Looks like that a little a problem with the software and scanning to the message from the computer.  When you disable the scan of the computer should be a checkbox bellow the button.  The box should say something like "Automatically start scan of the computer" when I log on Windows Make sure that this box is NOT checked.

  If the above suggestion already exists and you are still having the problem then I suggest that you uninstall the HP software. Once the uninstall is complete, it would be wise to perform a cleanup of the computer disk. A disk cleanup will improve the performance of the computer and remove the temporary files that may cause problems during the installation of the software. Once disk cleanup you must restart the computer and reinstall the HP software.
  
  To uninstall the HP software, click here: uninstall the HP software
  
  To perform a disk cleanup, click here: Windows Disk Cleanup (same steps for Windows 10) 8.1
  
  To download the HP software, click here: HP Officejet 6500 has more full feature software and driver

  If you please, after back and let me know how everything goes