Scanjet 5590 driver does not not in Windows 8.1

Similar Questions

• Support driver does not"say"windows is looking for a solutiondriver problem

  Original title: windows 7

  For a month, whenever I boot, I get a warning that says "Driver Support does not work. Then he said: "windows is looking for a solution."  Then the two opinions to go and my homepage appears as usual. But as I use the computer, I find that it freezes while downloading. And it will take several periods of time before the download starts. Sometimes I have to restart.

  You have a problem with your hard drive.

  For a Dell computer, please visit this link:
  http://www.Dell.com/support/article/us/en/19/SLN115162/en

• Microsoft Update for hp LaserJet 3015 PCL 5 driver does not install in Windows 7

  I use Windows 7 update.
  Microsoft Update for hp LaserJet 3015 PCL 5 driver does not install. He says 1 optional update is available almost every day, then when I try to install, it does not install and it says that the update is not necessary. Even once when I check updates, it says 1 optional update for the printer is available from Microsoft. And the story continues. I tried to reinstall the optional update, but the same problem persists perennielly

  Is this the driver you are looking for?
  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=503519&prodTypeId=18972&prodSeriesId=503548&swLang=8&TaskID=135&swEnvOID=4062

  Looking for HP for the pilot because it is better to get these live drivers from the manufacturer. TaurArian [MVP] 2005-2010 - Update Services

  No, these aren't the droids, uh, I mean the drivers he was looking for.

  In fact, it's better to get the new drivers from the HP website, you will notice the link you provided that the options only are available for this printer under Windows 7 drivers universal. I regularly have problems with universal drivers and strongly recommend to avoid as much as possible.

  I agree with the question of the original poster, which, after more than two years, remains unanswered by Microsoft. It seems that MS has a driver PCL 5 (not universal) updated specific 3015, but it fails to install the Windows Update control panel. I finally gave up on it, right click on the update and selected the option to hide it from view.

  Why bother with a solution when I use the button "Sweep-It-under-the-carpet" practice of Microsoft?

• Windows XP - LG DVD - RAM drive does not read the DVD. It's playback CD only... I ran the fix microsoft program... but it did not help at all.

  Windows XP - LG DVD - RAM drive does not read the DVD. It's playback CD only... I ran the fix microsoft program... but it did not help at all.

  CD/DVD players use different lasers to read CD DVD vs.  Eventually, your DVD laser has grilled.  It might be time to replace your CD/DVD drive.

  HTH,

  JW

• Ethernet driver does not work on Dell Dimension 8520 after Windows XP install.

  Ethernet driver does not not on my Dell Dimension 8520. I reinstalled Windows XP and drivers, and everything works except drivers Ethernet and those. They have big yellow points to mark by them. Tried to delete and restart, but they come back and still do not work.

  I don't see anything for 8520 dimension on the Dell web site.  Windows XP for Dimension 8250 drivers are here .

• My DVD drive does not appear in Windows Explorer

  This morning my computer ran a scan virus and other things, and when this was done, my computer will not respond to any type of CD.  No DVD, CD or even disks with files stored on them.
  When I open windows Explorer, the drive from DVD (e) is not even more appear.  I was wondering how to fix this.

  Hello

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows Media driver does not load code 10?

  anyone has this problem

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• Combo DVD/CD drive does not appear in Windows Explorer or the Device Manager

  The combo DVD/CD on my laptop drive isn't in Device Manager or Windows Explorer.  The door is not ejected.  You must use a paperclip, poking into the hole to open it.  I also re - it sitting, but it changed nothing.  We had this laptop for 1.5 years and the disk worked great until yesterday when trying to install Starcraft II.  Installation failed and it has messed up also the DVD/CD drive.

  We read some other difficulty advice and tried the upper and lower filters in the registry, but there was no entires of upper and lower filters in the key.

  The specifications of the laptop are:

  HP Pavilion dv7

  Processor Dual-Core Mobile RM-72 2.10 GHz AMD Turion X 2

  4 GB OF RAM

  64-bit Windows Vista

  Hello

  Check with HP Support, their online documentation and drivers, and their known forums
  questions.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows 7 LaserJet 6 p Driver does not

  I have Windows 7 and LaserJet 6 p/MP.  The updated Windows 7 driver does not work.  I noticed others with this issue?  Is there a driver available.  How can I get it?

  Hi Bob,

  I did some research today and found the MFG. cable has no Web site, or win 7 drivers for USB/parallel cable.  I almost gave up and came across this MSFT site:

  http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/cede656d-BAFA-47B2-b4e0-ed86b132e39d

  which mentions turned off bidirectional printing at the bottom of the screen of printer properties/ports.  BINGO!  It works fine now.  This is the problem all along, PRINTING BIDIRECTIONNELLE.    I don't know what this means, but it will print in my case.  I spent so many days of work on this issue, finally resolved.

  Thanks for your directional support on that.  I had to move in new directions, what happened to the response.

  Well being,

  Richard

• Freecom network drive does not work in Windows 7

  My network of Freecom 400 Gb, LAN + USB 2.0 drive, works fine in Windows XP.

  After installation of the software (for XP) Windows 7 recognizes the drive (FND) in the network, but clicking on the drive reported an error.
  When you try to 'Add and remove mapped actions' drivers software the network drive does not.

  Unfortunately, Freecom doesn't give not any medium.

  On some forums, I found a 'solution' that did not work for me: Start - computer - Network\\FND\Public

  If anyone using a Freecom network drive has found a solution, it could make me very happy to cummunicate this for me.

  Johan Dulac

  Hello

  1. What is the exact model of the Freecom Network drive number?

  2. What is the full and exact error message?

  I suggest you to check if the drive is compatible Windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  I would also refer the link for Freecom support:

  http://www.Freecom.com/support

  http://www.freecomforum.com/

• combo rom drive does not not on windows 7 and vista

  Hello
  I have a problem with my computer that my combo drive does not play a dvd in windows 7 and vista, but it works in windows xp when I boot dvd drom it stops and just reads the dvd please help

  It is an external hard drive?

  Try the fixit http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us base

• Need to reinstall my Windows 8, but the optical drive does not

  Separated from this thread.

  Support recovery of Windows 8 for product windows operating system recovery disc Windows 8 pro OEM Activation required 3.0 here in my hands, I have... I can't install them well... My dvd drive does not work with Windows 10.windows 10 sucks... I can't figure out how to take everything here and remove all ten and just replace my 8...

  Since you probably need creation for Windows 8.1 installation media on flash stick to do anyway the own 8.1 Windows Installer , you might do as well on the contrary much better Clean install Windows 10 since the installation in the link worked for everyone who tried without a single complaint, overcomes all and every other issue had with 10 Windows and gives the best installation of any Windows OS We can possibly have.

• My DVD/CD drive does not work in Windows 8 Professional, and it ISN'T a hardware problem.

  My DVD/CD drive does not work in Windows 8 Professional with or without data or audio in it. However, if I turn off the PC with a bootable CD/DVD in there, the PC recognize the media and initiate the CD when turned on. This confirms that the DVD/CD drive actually works, but for some stupid reason, Microsoft Windows 8 Professional will not recognize the same DVD/CD player it loaded since! Thanks again Microsoft for another product of shit. Now, how are you going to fix this? And how are we supposed to run things such as WordPad or paint, etc. I predict that Windows 8 will fall faster than Windows Me!

  Hello

  To access all applications - just right-click anywhere on the splash screen - the lower right corner
  -All Apps - scroll to the left to learn more. You can pin any application to the start screen - right
  Click on - to start pine.

  It is a real help:

  Windows Store - Top free - Windows 8 Cheat Keys

  While on the screen type start - Help

  Or Win Key Q plus Apps search - help

  Or charms - Search - Apps - Help Menu

  After that the foregoing-> on left click-> Help and Support.

  ==================================

  Solution Windows 8 - left Center - learn more
  http://support.Microsoft.com/GP/Windows-8

  Meet Windows - a good start
  http://Windows.Microsoft.com/en-us/Windows-8/meet

  ====================================================
  ====================================================

  It was an upgrade of Windows 8 or you you destroy the old operating system and
  do a full install? Are there any error messages?
  
  Check the Compatibility Center to see if the drive is compatible:

  Windows Compatibility Center
  http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/home?language=en-us

  Check with the manufacturer of the system support, their documentation online and pilot/firmaware,
  and ask questions in the forums (if any) on known problems. Some CD/DVD players are not
  Windows compatible 8.

  ---------------

  From the desktop - WINDOWS key + D while on the screen start to access the desktop:

  WINDOWS key + X or build the mouse in the lower left corner right click and corner - command prompt (ADMIN)

  Enter it below (or COPY and PASTE):

  Reg.exe add "HKLM\System\CurrentControlSet\Services\atapi\Controller0" / f/v EnumDevice1 /t REG_DWORD /d 0x00000001

  RESET
  (from AtishayMSFT)

  -------------------------------------------------------------------------------------

  -Use and you need to use it again after trying the methods below.

  What happens if a device is not installed correctly? (Run the hardware and devices Troubleshooter)
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Starting from the command prompt from the desktop - Windows key + X - (Admin)

  SFC/scannow
  (space between C and /)

  Then run CheckDisk execution - chkdsk /r (the / r includes the parameter f controls)

  Windows key + X - command prompt (Admin)

  Chkdsk /r
  (space between the k and /)

  Or run CheckDisk in Windows 8:

  Improve performance by optimizing your hard drive - see "to repair a drive.
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  --------------------------------

  Windows key + X - Control Panel

  Try this - Panel - Device Manager - CD/DVD - double-click the device - driver
  Tab: click on update drivers (this will probably do nothing) - then do a CLICK RIGHT to the road.
  UNINSTALL - REBOOT this will refresh the default driver stack

  ====================================================

  If necessary:

  Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
  settings) or even a restore.

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  =====================================

  Expert help with CD/DVD drive issues available here:

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://Club.myce.com/F61/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Toshiba canvio 1 TB portable hard drive does not work with windows 8

  The drinking Toshiba Canvio 1 TB hard drive is compatible with Windows 8?

  Hi Michael,

  Welcome to Microsoft Community and we are happy to help you on this question.

  According to the description of the query, the Toshiba Canvio 1 TB portable hard drive does not work on the computer.

  I ask you to answer some question in the context of this question:

  Do you have an error message when you try to access the hard disk on the computer? If Yes, what is the exact error message you get?

  I would like to inform you that the Toshiba Canvio portable hard drive is compatible with Windows 8.

  You can check the link to verify this compatibility with Windows Compatibility Center:

  http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=Toshiba%2Bcanvio%2Bportable%2Bhard%2Bdrive%2B&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  Please answer us with the required information on this issue in order to help you.

  Let us know if you have other Windows related issues.

• I bought Adobe Lightroom 6 only to see my DVD drive does not work with Windows 10.  Is it possible to download Lightroom?  I have the DVD with the serial number.

  I bought Adobe Lightroom 6 only to see my DVD drive does not work with Windows 10.  Is it possible to download Lightroom?  I have the DVD with the serial number.

  Download and install the trial version of Lightdroom CC.

  Then enter your serial number, follow these steps

  How to convert a trial CC 6 Lightroom Lightroom