Scanner A909g wireless problems

Similar Questions

• OfficeJet 8500 a909g Wireless will print yet all the lights show that everything is OK.

  HP Officejet Pro 8500 A909g wireless.  Windows 7. None of the buttons on the printer works.  I unplug the printer and plug it in again.  After the printer through its controls, I can print.  Leave it for a few minutes and try printing again and everything I do is fill in the print queue.  Given that I can run through the following steps, which is not a good solution for me.  I don't know if the hardware is the problem or the software.  I've dealt with this for weeks and I hope that all you talented people out there can help me.  Should I throw this printer and get a new one?  Thank you

  This article should help with your error printer offline:
  http://goo.GL/9C0fo

  Give the steps described a try and tell us if it helps.

  Good luck!

• WAG320N wireless problems

  I am having major problems with my Linksys WAG320N. Hoping someone here can help as I am quite clueless when it comes to networking.

  Without changing the settings, the other day that my Macbook Pro could not connect and he kept saying 'timeout '. From that point my iPhone also refused to sign, although access to the internet on my MBP viaethernet was fine.

  I did a hard reset according to the instructions of this forum, and then re-configured with the installation CD. The router wireless light was turned on but my MBP did not see the network. Finally, I managed to connect after I restarted my laptop and enjoyed every 10 minutes without internet connectivity before wireless problem network come fall and now does not appear in my list of networks once again, even if the wireless light is still on.

  Ethernet connection still works, but not via the wireless.

  I restarted my laptop and the router and tried switching channels on the router, all to nothing done. Very confused and frustrated!

  Someone at - it suggestions? Thanks in advance for any help.

  What is the wireless settings you have set up on your router (SSID, channel and security mode)?

  Connect to your router configuration page and click on the Wireless tab and click on the "Advance Wireless Settings" sub-tab and under change 75 beacon interval, change the Fragmentation threshold to 2304, change the RTS threshold to 2304 and click on save settings...

  Now let's see if you can locate your wireless network and try to connect...

• T40 2374-PU3 wireless problems

  T40 2374-PU3 Wireless problems - I tried every driver and followed instructions to install several times.  I was able to install it successfully in the past (about a year), but do not remember with the version of the driver that I used.  Using WinXP SP2 - just installed.

  Help, please!

  Thank you!

  Welcome to the forum!

  Here is your wireless driver:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-42683

  After uploading, be sure to check out according to the instructions on the download page.

  I hope this helps.

• S10 - 3T wireless problem

  My rig to receive yesterday and fought wireless problems.  Thought, he was my network for some time and found if I close the 3 t of the network works fine.

  The 3 t at this point works well on the network but sometimes slow.  However any TIME that I try to download a file, it works as usual for a while then just dies.

  Stop downloading and it is surfing.  It seems also to kill or slow down the network to a crawl at the same time.

  I tried to update the drivers in Device Manager and it says they are the best already.

  Any thoughts?

  Thank you for your understanding.

  The ends of the ongoing saga I think.

  I went to Burger King this morning and connected to their hot spot and the thing that worked great - downloaded a large file on site.

  Lenovo, I called and they told me to uninstall the software Lenovo 5 ready.  I did and rebooted and it worked fine and still seems to work very well ;-)  They said that it causes conflicts.

  Worked on my unit anyway.  This happens on a platform of Asus here one year, their uninstalled software and it worked fine.

• OfficeJet Pro 8500 a909g wireless connection problem

  I have a printer wireless OfficeJet Pro 8500 a909g.  My PC is Windows 7 (64-bit).  Recently, the printer wasn't working reliably and we took to reboot our router frequently at the same time.  Router problems seem to be solved because my PC at home and the work laptop are well connected and running.  However, the printer would not work last night when I really needed.  The documents would appear in the queue, but never reach the printer.  Today, I uninstalled all the software of HP using the CD of origin and reinstalled all the latest software and drivers from hp.com.  Of course, I rebooted the printer several times during this process.  Using the Network Wizard wireless via the screen of the printer, I am able to locate my SSID and enter the WPA key.  The printer confirms that it is connected to the network.

  If my computer and printer are both connected to the same network why can't the HP software locate the printer?  Whenever I try to run the installation/Setup program it tells me that there is no HP printer on the network.  As I said, this printer has worked on this wireless network in the past.  I also downloaded and run the scan HP and difficulty of the program to see if she could solve the problem without success.

  Any other suggestions?

  Well, what I'm going to make you, it's just a basic uninstall and reinstall the printer. I'll describe the steps and you are right, we can use the USB > wireless Assistant. You can access that by running the software after the installation of the USB. Here are my steps...

  First of all, if you use a USB cable, be sure to remove it. Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

  The START menu type "%temp%" and press on ENTER. Here, I want you to press Ctrl+A and press on REMOVE. Some files you cannot delete them, ignore these files and delete the majority that allows it to.

  Follow this link to download full feature software and drivers of the printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=3752459

  Install and let me know the result!

  In addition, here is how you set a static IP address: allocating an address static IP to your printer of HP Wireless - Windows 7 - YouTube

  Have a great day!
  

• Win 10 analysis of problem with Officejet Pro 8500 A909g wireless printers

  I have the same problem, scanning works very well since long I do not use the HP Solution Center, it worked fine on W7, but after the upgrade of the W10 (YES I installed the new feature full support for W10)-Scanner is still not functional with the HP solution Center. I tried all solutions with no joy. HP scanner doctor says that it cannot find HP Scan, Solution Center, said another program uses the sanner. ?? Frustrated!

  Hello

  1. This same CCC folder, run Uninstall_L4.bat) press enter once if only black dialogue is shown) and allow to fill any screen uninsitall (there will be multiple screens to uninstall one after the other.
  2. Restart the PC when requested to do so.
  3. Right click the button start and select programs and features, there is no request of HP left.
  4. Locate the following folders, and remove all remaining files HP or Hewlett-Packard :
     
     • C:\Program Files
     • C:\Program Files\Common Files
     • C:\Program Files (x 86)
     • C:\Program Files (x 86) \Common Files
     • C:\Users\(your user name) \AppData\Roaming
     • C:\Users\(your user name) \AppData\Local
     • C:\ProgramData
  5. Navigate to C:\Windows and delete the pritner folder, it should be identical to hpoj8500A909g
  6. Always in C:\Windows, find the twain_32 folder and rename it to twain_32.OLD
  7. Right click the button start and click on run, type temp in the shown dialog box and press OK, then delete all the contents of the Temp folder (no worries, these are all temporary files that can be saefly removed)
  8. Right click the button start and click on run, type folder in the shown dialog box and press OK, then delete all the contents of the Temp folder (no worries, these are all temporary files that can be saefly deleted).
  9. Save the insatller depending on the Office you'd, do not reinstall it again that I just send you additional last private preliminary step to reinstall the HP software:
     http://ftp.HP.com/pub/softlib/software13/COL31041/MP-110033-3/OJ_AIO_P8500_A909_Full_Win_WW_140_408-5.exe
  10. Look for a message private to me, if you are unfamilier with works of how private e-mail, you will see a notification message in the top right envelope icon from the page to the screen of the forum.

  Kind regards

  Shlomi

• 8600 Communication HP OfficeJet Pro wireless problem

  When I try to print or scan, I get a message that the printer/scanner cannot communicate with the network.  The antenna network icon shows that I am connected to the network.  With the print and scan of doctor utility, I checked that there is at least a connection to the wireless network.  Address and logon credentials are correct.

  The utility shows that there are 2 network connections - that I am connected to watch a 60% signal strength and the other that I'm not connected, a signal strength of the 68%.

  I'm normally able to scan and print normally once every two sessions that require this functionality.

  The HP 8600 has automatically been setup using the thah software supplied with the printer without any problems.

  Thanks in advance for any help you can give.

  Hi Gemini02!

  I had the opportunity to try the fix several times and every time I managed.  It looks like a good solution.

• Connectivity with printer Epson wireless problems.

  Epson printer indicates that the wi - fi connection is excellent. The connection to devices also indicates that the signal strength is excellent. However, when I go to print it tells me that there is no wireless printer! This happens with the iMac, iPad and iPhone. This just started happening about 2 weeks ago.

  See if it works... In system preferences > printers and Scanners choose your printer and remove it from the list, and then add it back

  Get help to solve the problems of printer on your Mac - Apple Support

  https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?useCookie=Yes & infoType = FAQ & oid = 209708 & prodoid = 63095161 & foid = 230405

• Cause first of the wireless problem?

  I've had my laptop repaired a week ago, as the wireless card was more is detected. I bought a dv6258se in Feb ' 07, he was really running hot, the GPU ran above 80 ° C, 55 ° C CPU all idling. I installed F.3D as soon as it was released in Nov ' 07 and there really the time down, and a year later, the wireless gave out. The motherboard was originally a 30B 7 Quanta, and it's still a 30B 7 Quanta, flashed with the version of BIOS F.40 even if my the driver model page shows later as F.3D.

  So, what's the problem? I can probably keep it on the downlow time if it was caused by excessive heat. If I got was a band-aid to keep me more of the extended warranty, while HP does not solve the problem for free once again, then they did a very good job of it. I have not enough income available Clipboard $ 1100.

  F3D is the last Messenger for your model:

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=2093 & LC = on & DLC = in & CC = US & lang = to & Product = 3340175

  F.40 is posted on other models, but can't say that I recommend:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-64061-1 & LC = on & DLC = in & CC = US & lang = to & os = 2093 & Product = 3546969

• ZBook 14 wireless problem solved!

  For a few months now, my ZBook 14 (still under warranty) drivers wireless (Intel Wireless - N 7260 BN) were not loading at startup about 50% of the time.  Pilots would almost always successfully load if I restarted, but it was aggravating circumstances somehow.  I called HP Elite ZBook Technical Support and they walked me through several stages, including the uninstall and re - install the latest drivers, but nothing helped.  They arranged for a HP field Support Technician (FST) to install a new wireless card.  Personally, I thought it was a hardware problem, but that seemed to be their next step.

  So, today, their TSP arrived and quickly installed my new wireless card.  Well, it does not solve my problem, so she put the old card in and then began to make inquiries.  What she found is that even though my computer reported that he had the latest version of the BIOS installed, there is NO!  06/02/15, I allowed my computer to update to the latest version of the BIOS, which then was 01.30 (release date 09/12/14).  However, she discovered that a subsequent update of the BIOS (01.30 A) had been released only a week after the patch (dated 12/15/14) 01.30 in the desription of the BIOS update he said that it was precisely to add support for my card Intel Wireless-N 7260 BN

  Big CONGRATULATIONS to the girl TSPS for gap identification and the new installation of the BIOS update solved my wireless card problems!  I apparently never thought that because my computer reported that he had the latest version of the BIOS installed, and which does not recognize my "HP Support Assistant" software it was a newer BIOS available, either!

  Just for an update, even after my ZBook is update to the latest version of the BIOS (01.30 A), my "HP Support Assistant" software always reports that my version of BIOS is 01.30.  It of like the software recognizes numeric characters, but can not see the Alpha "A" character.  Just thought that info may help someone.  Proof that you can't ALWAYS trust your HP Support Assistant software...

• Laptop HP 650 - network wireless problem

  Hello

  I have a laptop HP 650

  I installed windows 7 x 64 sp1

  I downloaded all the drivers for the HP product page

  I installed all the drivers, but I have a problem with the driver for the wireless network.

  All drivers works fine, except wireless driver.

  What can I do?

  That you help me with some advice?

  Thank you!!

  Best regards

  REMUS

  You are the very welcome.

  Here is the link for the driver you need:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 0 & prodSeriesId = 5229455 & prodNameId = 5229457 & swEnvOID = 4059 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ob-118499-1

  He was not on the support page and the driver of your laptop.

• Satellite A30-PSA30E Intel 2200BG wireless problem

  Hello
  I bought the new wireless card intel 2200BG miniPCI for my Toshiba laptop. I have card connected to the miniPCI slot free and both cables are connected as well.
  My problem is that this hardware switch on the right side of my laptop does not work (no led light). The original Intel software is posting I have material activate this card. Can you help me please?

  Hi Michael

  I hope that you have connected the card properly. The white cable must be connected to the HAND and a black to the power supply please check if the card is recognized and properly installed. The status is displayed in the Device Manager. The wireless adapter should appear under network adapters.

• Tecra M3 & Port Replicator III wireless problem

  I just bought a Tecra M3 and a port replicator III. When undocked the M3 connects to my WiFi without problem and remains connected. Once anchored it continues to have problems connecting, despite full status of the receiver and after connection bar / disconnect for a while he just gives up and says unable to connect. If I disconnect then it can connect ok. Someone at - it ideas. It can see the network fails to connect properly.

  Hello

  Very simple to solve, you must upgrade the driver Intel Wireless 2200 b/g Intel 9.0.2.25 card or higher.

  Good luck

• Tecra M2 PTM20E Wireless problem.

  Hey

  I just bought this laptop that was used I installed very different drivers for the wireless, but none of them work. I also have a problem with the battery.

  I think there is a problem with the network card if yes is it difficult to replace?
  Thanks for any answers I've attached screenshots here below

  http://Tinypic.com/r/246883k/6 - network driver cannot click anything that nothing works

  http://i45.Tinypic.com/fdesya.jpg - problem battery sound in a foreign language, but it means windows can't find a driver for battery

  http://Tinypic.com/r/2vtnm7a/6 - no internet connection that you can see that the window is empty

  http://i49.Tinypic.com/bis86c.jpg - home edition everest showing the map as a one intelPro.

  Sorry for the foreign language: P

  One of the photos shows the network cards and it seems that your Tecra supports processors Intel 2200 802.11 B/G WLan card

  Go to Device Manager and check if the WLan Intel 2200 card is recognized.

  If it s not, install the driver WLan Intel (Intel PRO/Wireless 2200/2915) which can be found here:
  http://APS.toshiba-tro.de/WLAN/?page=downloads

  the first photo shows only Intel ProSet is just and only the tool for configuring Intel Wlan driver and NOT so possibly the driver WLan is missing.