OfficeJet 8500 a909g Wireless will print yet all the lights show that everything is OK.
HP Officejet Pro 8500 A909g wireless. Windows 7. None of the buttons on the printer works. I unplug the printer and plug it in again. After the printer through its controls, I can print. Leave it for a few minutes and try printing again and everything I do is fill in the print queue. Given that I can run through the following steps, which is not a good solution for me. I don't know if the hardware is the problem or the software. I've dealt with this for weeks and I hope that all you talented people out there can help me. Should I throw this printer and get a new one? Thank you
This article should help with your error printer offline:
http://goo.GL/9C0fo
Give the steps described a try and tell us if it helps.
Good luck!
Tags: HP Printers
Similar Questions
-
OfficeJet k5400 prints then all the lights light up yellow, power down then turn on printer resets loan. It's all new HP Officejet pro 8000 to had the power to issue even down to reset.
Looks like the power module is out. It's the black brick in the power cord. The only way to replace it is to contact HP, but before you do that, try to reset the module. The document following the link will guide you through it. If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.
-
OfficeJet 8500 A909g cannot align print heads
OfficeJet 8500 A909g all-in-one. No printing Cyan or yellow color and try to align the print heads with no luck.
Help
I'll take a look at the document below.
Let me know how it goes.
-
I just got the Officejet Pro 8600 as a gift and burden of implementing software and it on my wireless network. When I try to print an e-mail or a coupon, the command changes to the printer and indicates in the queue. Then after a few seconds, the print queue (work) disappears without printing the document. This command goes to the HP ePrint feature or the Officejet Pro 8600 network? It shows the HP ePrint as being on USB.
I have run all the Diagnostics, downloaded all the new software, software packages and updates. I spend several hours trying to get to the printer.
Thanks for any help you can provide.
Hi @bksechols
Welcome to the Forums of HP's Support. I understand that when you send a print job to your printer Officejet 8600 to printing to the queue, then disappears without the printing of the print job.
To help you, you please provide additional information?
- How is the printer connected (USB cable, ethernet or wireless)?
- What operating system do you use?
- All print jobs fail? If Yes and you are using a Windows operating system, please try printing HP and Scan Doctor for Windows. HP printing and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems.
- When you send a print job are sending the address of electronic mail of the ePrint printer? If so please check The HP ePrint, print not print job if you send the print job using the print command, please see the document of your HP printer print jobs are stuck in the print queue .
I look forward to hear from you.
-
He won't return. Push buttons does not help, or not pulling on the power cord to the printer, standby, restart the router & printers. I have also connected by ethernet cable but I do not think that the connection is the problem because the printer is connected to power but will not produce lights or sounds. It does not appear on the list of printers, and utility HP cannot detect it. Windows Vista 32-bit, in my opinion, bought in 2007. Is it gone forever?
Hi Poboy,
If the adapter has a green light to this topic, and you tried to plug it into different outlets, this would indicate that the printer may be dead. If you have tried these steps consult the following site
-
everything about will print but gives the warning message that it cannot scan, copies or faxes
The all-in-one printer is only a month after the warranty and has suddenly stopped working. It can print but when trying to now the scanner displays a message warning saying that it cannot scan copies or faxes. Can anyone help? I don't want to pay the amount of $25 per phone call to hp asking them to help in case they cannot correct by phone.
Thank you
Hey carlya,
Wanted to check on how was the question. I also recommend a tool of diagnosis provided by HP, called HP print and Scan doctor. If you have not done so, then I suggest you download and run this tool.
This tool can be found by clicking here.
I would like to know how this happens.
-
Printer does not print. All the flashing lights
HP 1300 printer has stopped printing. All the lights flash. any advice?
If your printer is a HP LaserJet 1300 so please see if it helps:
-
We sccm 2007 R2.
We used AD discovery to discover all the computer in AD and automatic installation. We are able to deploy the agent to computers.
I was on leave we I come back, I discovered that there us no computer system. An abducted person discovery method. I managed to re-create AD discovery of computers, but now all the computer shows that there is no agent installed.
Hi lefogwane,
Thanks for posting your question in the Microsoft answers Forum. For any questions about SCCM, please visit the following link:
http://social.technet.Microsoft.com/forums/en-us/configmgrgeneral/threads
-
My printer recently started telling me it was in a State of 'error' and could not print my documents. Sometimes I could turn off the printer market and all that was trying to print would then print, if documents or Quicken checks. Now I can't print from the computer at all, or it will print checks from Quicken even if I turn the printer power off and power on. The HP Web site indicates that it is connected. It is the second computer from HP Officejet 4620 of the original that I bought. The first has a problem that has been covered by the warranty, and this one doesn't seem to be much better.
Hi @Janilynn,
Welcome to the HP Forums!
I read your post and wanted to help.
I understand that the printer does not print when the computer shows that it is connected. Please run the print and scan the doctor.
I would like to know if it solved the problem or gives you an error message.
If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.
Kind regards
-
OfficeJet 100: All the lights are flashing, printer does not respond
Sometimes when I print a document that contains multiple pages, pops up an error. During the print job, the printer stops work on the intermediate page (for example - second page), spits out the rest of the blank page and all the lights flashing. The printer does not any action, only a hard reset (disconnect battery). After that, he will normally for a same day behavior, and suddenly many, same error. Printer is mainly used through Bluetooth, but the same error occurs also in the cable.
I checked almost everything I could, there is no paper jam, cartridges are placed correctly, battery is fully charged, also this page http://support.hp.com/us-en/document/c02643100, nothing helped. It's really annoying, when it arrives of the exhausts. How can I solve the problem? Any ideas? Thank you very much.
He gets these events:
69556: event_dirty_power_up
69552: event_log_no_media_pick
Hey @Mar_tin,
Welcome to the Forums of HP Support! I hope you enjoy your stay here.
I see that your Officejet 100 is having problems with the paper feed. I can help you with that.
This document describes How to fix paper jams with your printer. If after completing the document, you still get paper jams, the printer will be replaced. You can contact HP support by clicking on this link and fill out the form below to discuss the options based on your warranty.
Please let me know if this fixes the paper jams or if you have other questions. If not, have a great day!
If this solves your problem, then please help others find this post by clicking on accept as Solution on my post.
If you appreciate my help, so please let others know by clicking on the icon below my post thumbs up.
-
My Hp F2210 printer will not be closed, and all the lights are on. using a compaq presario with windows xp installed. I tried to unplug the unit. Problem has not been resolved.
I'm sorry that you are experiencing this issue. Sometimes there may be ink system failures, ink cartridges are bad, or even the printer maintenance needs.
Here is a link that can help you with this problem.
http://support.HP.com/us-en/document/c01430567
Let me know if it helps.
-
I have the screen things different impressions on the internet and all the colors showed up... even black. Any ideas on what could be the problem
Hello
I would like to know the out come of the steps in my previous post. You can also follow the steps in the link below.
Solve printer problems
Given that the problem is related to Microsoft Office Word, I suggest you to post the question on Community Support in Microsoft Office Word.
Community office
http://answers.Microsoft.com/en-us/Office/Forum/Word?tab=all
Write us with the State of the question.
-
I get a message saying "you have exceeded your profile storage space. Yet all the files listed th are actually my docs and application data. How to delete my profile, but not from my pc? increase the max profile size
1. the first thing to do is to make sure that the computer is completely virus/malware-free. Googling around this error produced quite a few links where the posters were or had been infected with Spyware Protect 2009 rogue.
http://www.elephantboycomputers.com/page2.html#Removing_Malware
Once the scanning is complete (do not skip the preparatory stages no more), if the problem persists:
2. double-click on my computer, right-click the icon for your hard drive, click left to get its properties. If you see options to set Quota management make sure that they are disabled.
3. in the case - BUT ONLY AFTER YOU ARE sure THAT THE MACHINE IS MALWARE/VIRUS-FREE - copy the lines between asterisks (not including the asterisks) below and paste it into Notepad. Save as undopolicy.reg somewhere, you will find. And then double-click the .reg file, that you have just made to melt in your registry. I hope that this will take care of the issue.
*****
Windows Registry Editor Version 5.00[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
'EnableProfileQuota ' = -.
'ProfileQuotaMessage ' = -.
"MaxProfileSize" = -.
'IncludeRegInProQuota ' = -.
'WarnUser ' = -.
'WarnUserTimeout ' = -.
*****MS - MVP - Elephant Boy computers - don't panic!
-
Printer 1700 stop working, all the lights on
My Dell Printer 1700 ceased to function, and the top of the page of all the lights are lit. Y at - it a solution that is easy, or that I need to replace the printer?
Hello Jon,
Please post on the forum. All the lights on the points to a failure in one of the panels of the system, if you press the button continue, you should get a secondary sequence of lights to so you get a closer outcome of the question. You can compare the lights using the guide of the user at support.Dell.com. In most cases it will be better to replace the unit than to try to fix it.
Kind regards
Joseph E -
Convert Photos from iPhoto. Why will it erase all the pictures on my computer? How can I save them?
Why will it erase all the pictures on my computer? How can I save them?
You don't have to do anything. When you open your iPhoto library with the new photo app that the existing library is migrated to a new library of Photos. However, as with any operation should have a current backup before proceeding.
Maybe you are looking for
-
Thunderbird runs on my Area2?
I have an Area2, will this work on it?
-
because he go away (sometimes 30 seconds) and I have tried clicking on "do not show this, ' and 'ignore' and others (all the possibilities.) Its driving me crazy and I think the move to Opera instead of Firefox. Can you help me? Thank you. MM2
-
Found usb bluetooth adapter in 626 x box? Where the application overview?
I just bought a replacement to my 2009 Enterprise edition ReadyNas Pro success. I have contributed the most to the RAM and upgraded the processor in the old horse in 2009 and it has been amazing ever since, but recently the lower power supply fan sei
-
How this happen - I've changed nothing--same used flat screen monitor. Monitor is set at its resolution [native] max. I tried to lower the screen settings, but problem still exists and desktop bar on the right does not reach the bottom and bottom tas
-
Sprint SmartView error 635 for USB card wireless Novatel U760
I couldn't use my card wireless U760 Sprint for more than two weeks now. I called Sprint technical support and tried to solve the problem. SmartView boots, shows normally; then I try to connect. Error is returned, RAS return error value: 6. found ano