Tecra M3 & Port Replicator III wireless problem

Similar Questions

• Portage Z30-A-13W connected to the high speed Port Replicator III - USB problems

  Hi all.

  We recently bought a new Portage Z30-A-13W and Hi-Speed Port Replicator III.
  Setting network and graphics work correctly with port replicator, but the USB ports don't work at all.

  I tried the port replicator USB 2.0 and USB 3.0 and I can't seem to work with a keyboard, mouse, USB key or a mobile phone.

  In the case of mobile phones, it is also no output power of the ports that the mobile does not start to load.

  At any one another experianced this problem and what was the resolution.

  Thank you very much

  Jonathan Davies

  Hello

  As far as I know additional drivers are not really needed to use the USB ports.
  This is why I m wondering why don t USB ports work.

  It might be possible that ports high speed Port Replicator III USB are faulty, but to be honest, I can't imagine that all 6 USB ports may bad work at the same time.

  So maybe it s a software problem.
  First of all, I would recommend the default BIOS and check the USB legacy support for keyboard and mouse could be activated.
  After access to the Device Manager and remove / delete the USB hubs and controllers in the list of devices.

  Keep high speed Port Replicator III connected to the computer and restart the device.
  Usually, the system should recognize automatically deleted USB ports and must update the drivers of USB ports.

  I hope that the USB ports don't work after this short workaround solution.
  Keep your fingers crossed.

• Tecra A8: Problem with the USB printer connected to the Port Replicator III

  Hi all

  I have a problem with my Tecra A8, year Advanced Port Replicator III and a USB printer. With the printer connected to a USB port on the Port Replicator, I have to wait 2 minutes for printing to start. When it is connected directly to a USB port on the laptop and the laptop disconnected from the Port, printing starts immediately. I have the latest drivers from the Isensys of Canon LBP 2900 installed and Windows Vista professional as the operating system.

  I called the technical support of my country, but her is not recorded similar problems.

  A person with similar problem? Some help would be very appreciated.

  Thanks in advance.

  Hello

  Seems like a strange question... Already done the standard procedure in the event of such errors? :)

  The standard procedure is somehow similar to the following:

  -Update your BIOS
  -Update all the drivers for your machine
  -Update your printer drivers
  -Update your operating system

  If all else fails, then try an another Portrep if available, maybe you need to contact your dealer for an another portrep for the test.

  Something like this should be your way. And then you sucessfully made a TROUBLESHOOTIN´ ;)

  I'd be happy to hear feedback from you on your situation...

  Welcome them

• Tecra W50 - A Replicator III, Audio USB problem

  Hello

  I use a port replicator (Toshiba HI SPEED PORT REPLICATOR III PA5117E-1PRP) with a Toshiba Tecra W50 - A with Windows 7 (64-bit).

  I need to use the audio input to speaker and microphone on the Replicator, but no sound is coming or in.

  When I anchor my port replicator (Toshiba HI SPEED PORT REPLICATOR III PA5117E-1PRP), then an unknown device appears in the Device Manager with then the Advanced USB Audio Driver name.

  I was unable to find a driver on the support pages.

  Can someone direct me to the appropriate download area please?

  Help is very appreciated.

  Concerning
  Christian

  Hello

  It is very interesting how Toshiba cares about the problems of their users.
  I think this is the last time I bought some stuff from them.
  Maybe I'll go back to DELL. They care more.
  My post will be probably deleted now...

  Christian

• Tecra Z40-A-176 - how to get support for high speed Port Replicator III?

  Hello

  a customer garage bougt some Tecra Z40 A 176 with high speed Port Replicator III. Unfortunally to either the displayport Port replicators is not working properly and I want to have the support so.

  What I found was the support for laptops page itself, but not for the port replicator.

  With regard to:
  Klaus

  I want to have the support so.

  What do you mean by support and what is the problem with the display port?

  If you have hardware problems, you can contact your dealer or contact the Toshiba authorized service provider that is available in your country.

• Tecra S1 stops when you use the Port Replicator III

  Hello

  I ve you have a problem with a Tecra S1 Notebook and Port Replicator III. When I anchor the portable station, it turns off immediately. It doesn´t so serious I m in Windows or not. The same notebook works in a Port Replicator II without any problem. My first thought was, the Replicator III may be damaged, but I tried with an another Tecra S1 and it worked! Can someone help me with this?

  Thx a lot!

  Mathis

  Hello

  AFAIK that should not be any problem as Tecra can be used with the two PRs. The only thing I can recommend is to reinstall the Toshiba Mobile Extensions.

  Good bye

• Keyboard-PS/2 on Port Replicator III problems

  Hello

  I have no problem using my keyboard-PS/2 on the Advanced Port Replicator III.

  It is properly connected. When I first initialize my Tecra S3 the keyboard just doesn't work. I then wait for WinXP to appear and restart the system - that is, the keyboard works.

  What can I do to get my keyboard to work first start? I never had these problems with my previous S2.

  Hello

  Looks a bit like a hardware problem...

  Have you ever tried to connect another keyboard to the PortRep? It may be good to try. Otherwise, I suggest you get somewhere a PortRep another and try it with this one.

  May be that your PortRep is down...

  See you soon

• Tecra A4 and the docking station Port Replicator III

  HI, I would buy a Tecra A4 with the staition of home, but I see that the docking POrt Replicator III has no s-video, bur the pc Yes. Anyone knows if I can use the s-video on the oc when I put the pc on dockin station?

  Hello

  Sorry, but it is not possible. You can only use the S-video port on the device directly.

  Good bye

• Tecra M9 longer works with the Advanced Port Replicator III

  Hello

  I have the Advanced Port Replicator III Plus (PA3474E-1PRP), and it works very well with my M5 (M3 and M200). For example I connect my laptop through it to my monitor/mouse/keyboard/external DVD/hard drives, sound, webcam etc...

  Now, I'm to assess what should I buy as my next laptop and the M9 (PTM91E-03000MEN) seems good.

  Question: * the M9 will work with my plu III advanced port replicator? *

  Otherwise, * y at - it another docking station option that will allow me to connect a M5 and an M9 * please? (of course not at the same time).

  If there is no solution that allows a single docking station for the M5 and M9, then I might as well choose a laptop from another supplier... Main reason to stick to Toshiba all these years is the docking station compatibility that I move older models to the newest...

  All thoughts welcome...

  See you soon
  Daniel
  --

  Tecra M9 and Tecra M5 do not have the same docking connector.
  This means Tecra M5 is the APR III +, Tecra M9 has Express Port Replicator.
  You need the correct docker for each system.

  May it is a solution to be able to use the Toshiba Dynadock. It's USB based:
  http://www.dynadock.com

• Tecra A8 and Adv Port Replicator III - no audio output from the port replicator

  I have a Tecra A8 anchored on an Advanced Port Replicator III. All ports (network, USB, video) with the exception of the AUDIO ports seem to work well. I can get sound from the headphone jack on the front of the A8, but nothing since the station docking ports. Is there a docking station driver or something I need to install to get the sound from the docking station not the laptop?

  Hello

  The Advanced Port Replicator III supports the line and line port left.
  As already suggested by user above; Check if you are using the command-line output port!

  Welcome them

• Tecra M3 and Advanced Port Replicator III: not recognized as docking station

  Hello!

  Just install my new M3 and Advanced Port Replicator III. Everything works fine, but the Port Replicator is not recognized as a Docking Station (No disconnect in menu button start XP; pressing disconnect button on the Port Replicator itself has no effect either).

  Is TI WHEREAS behavior?
  Thank you in advance.

  Hello

  You reinstall the unit with the recovery CD?
  As far as I know that the TOSHIBA Mobile Extension3 for Windows XP is responsible for the good condition of the market of the docking station.
  Well, I recommend to reinstall this driver and utility.
  Perhaps the installation of the new driver will solve this problem.

  Good bye

• Tecra S3 Advanced Port Replicator III more: video output, analog & digital

  I have a Tecra S3 in association with Advanced Port Replicator III.
  I can't get the two graphics cards to work together.

  The analog and digital video output should work together.

  It works on a Tecra S2, but not on the S3?
  Does anyone have an answer?

  Hello

  You want to use both outputs DVI and VGA on Advanced Port Replicator III graphics more simultaneously?

  Advanced Port Replicator III more supports the use only if the computer system unit laptop itself also supports the simultaneous use of RGB & DVI.

  So that would mean that the backs of Tecra S3 not supported this feature

• Advanced Port Replicator III and Tecra M5 - compatibility issue

  Hi all

  Had a brief search, but could not find a similar position.

  Is the Advanced Port Replicator III PA3314E-1PRP compatible with a laptop Tecra M5?

  Thanks in advance and amicably.

  James

  Yes, it is compatible, I can confirm this info above
  If you wish, you can consult the Web of Toshiba Europe site Options & accessories.
  You will find this info useful

• Port Replicator III + very high CPU when you move the usb mouse only in W2k

  Tecra M2 with a port replicator III +.

  It is set to dual boot XP and Windows 2000 (yes I know it is well a bit but I have a bunch of stuff installed in win2k it is difficult to find these days).

  XP is very good at 100%, but with win 2000 if I use my * USB mouse * on the * ports port replicator and waggle the mouse around - the * CPU * jumps from 0 to * 70 + % * use (System process that seems indicatates like IRQ problem). If I plug the mouse into the ports of the laptop (when the laptop is connected) - it's fine, no more than 5% cpu usage. It's a microsoft basic mouse. I really believe that this is a problem of usb any, because the cpu jumps a little if I type quickly on my usb keyboard (only a few %). It comes with the usb ports on all the Replicator.

  Any ideas? I don't really want to plug my mouse in the morning because it beats a little interest to have a docking station in the first place! I have installed mobile extensions. All other aspects of the replicator are fine

  Martin

  Huh it will not be easy to find the right explanation for this.
  At the moment when Tecra M2 has been offered on the market as Replicator port compatible Toshiba offered Toshiba Advanced Port Replicator III (no +) and at that time both supported in operating system has been tested with it.

  Toshiba later designed Toshiba Advanced Port Replicator III + and confirmed the compatibility with Tecra M2, but obviously with more recent WXP (at this time).
  So now, you've been following situation: you use most recent Replicator port, but with much older operating system so I assume that there may be a compatibility issue with W2K.

  I can't imagine use you so often with W2K and if so, may not be so problematic to connect the mouse directly on the cell s USB port.

  Sorry, but I don't think that there is nothing you can do about it.

• External keyboard works only after the restart with Port Replicator III Plus

  The problem is that when I start the laptop, the external PS/2 keyboard does not work. When I reboot keyboard this one turns around and then I can use it.

  This problem occurs on a laptop Toshiba Tecra with an Advanced Port Replicator III Plus. I used several keyboards, so this isn't the problem. I changed a value in the bios which is used for devices USB (mouse/keyboard). I disabled the option, because I use a keyboard and a PS/2 mouse, but the problem is not resolved. I hope someone has an answer to this problem.

  Hello

  It will be interesting to know what model Tecra you use. Is it perhaps Tecra A6?