scanning from a touchpad 8600

Similar Questions

• HP Officejet Pro 8600 Premium: Printer leaves black lines during copy and scan from ADF

  I know this question has been asked several times, but whenever I try to copy or scan from the automatic document feeder, it leaves black lines on the copy (with the document on the works of glass like a charm).  I've read through the forums and have tried the advice to unplug the machine and so on, but none of these suggestions work.  Any help would be appreciated.

  Hey @Huskers1,

  Welcome to the HP's Support Forum!

  I see that you have some problems with a line when copying from the document on your Officejet 8600 Premium feeder e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Get a little water and a lint cloth.
  2. Open the left upper part of the printer, where the document since the charger goes into the printer. It should open up as you opened a book.
  3. With your damp cloth wipe the rubber stamp, the rollers in the cover and the casters on the bottom of this section.
  4. Again open the left side of the printer, as you opened a book.
  5. With your damp cloth, wipe the rollers, you will find inside this section.
  6. Close the upper sections of the printer and open the flat section.
  7. With your damp cloth wipe the rollers and the white bar you see on top of the printer
  8. Clean the glass on the left side of the printer.

  Once all the pieces you cleaned dry, please let me know the results. If you remove the line, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Option missing Scan from the control panel for my Officeject HP 8600 pro. How can I get that back?

  I have this printer for a few months now - it works well until today.  Option missing Scan from the control panel for my Officeject HP 8600 pro.

  I have Windows 7

  Access has been-

  Beginning

  Devices & Printers

  HP Officejet 8600

  He opens a box that had a detection option (later), which I clicked to bring up the scan dialog box.

  The option disappeared. I have no idea how it happened.

  How can I get that back?

  1. first of all uninstall the software

  • Click on start button, then go to programs > HP > Officejet 8600 and click on Uninstall.

  2. then go to Control Panel > programs and features

  • Officejet 8600-click and then click on uninstall a program
  • 

  3. then download the software on the HP web:

  •  HP Officejet 8600 - drivers and full software features - Windows 7 64 bit

  4 and install with the downloaded software.

  Hope these steps help you,

  * Click the stars KUDOS to say thanks

  * Click the accepted Solution if the answer to the question.

• My OfficeJet Pro 8600 more returns "not recognized computer" when I scan from desktop computers.

  My 8600 OJPro more has been configured to recognize my Dell computer.  What settings should I on my computer for the printer OfficeJet Pro 8600 more allow scanning from my Dell desktop?

  I would try to run printing HP and doctor Scan first to see if the problem can be solved with this automated tool.  Click here to access the tool.

  Thus, there are measures to check the WIA service:

  (1) type services.msc in the section run or search programs and files

  (2) scroll the WIA: Acquisition of Image Windows service

  (3) to ensure that this service is running.  Click on stop, and then restart to ensure that the service is running properly

  (4) restart the PC to see if WIA will resume functionality

  (5) check the properties (right click on WIA) 2 dependencies are defined

  (6) check to make sure that the remote procedure call (RPC) is running

  (7) check the detection equipment core and make sure that this forum works

  Let me know how it goes.

• JPEG scans parts Pro Hp-8600

  IMac, Mountain Lion 10.8.2, Hp 8600 Pro scan more using the printer against the panelof the printer:

  Items will be analyzed as a complete picture in PDF format only. Selecting JPEG results in either part of the image or point and a line or two that may be in the document, but each shows that scan 1 scan, scan-2-3 etc. Selecting the JPEG option in my preferences iMac systems - print & scan results in everything - but, sometimes, I can get a complete analysis if I take what appears to be a crop box and stretch to cover the whole point, but I still get the other pieces of area as well.

  It's the same if I try to scan E-mail JPEG as well. He seems to take the areas of preference and analysis these alone. Thank you.

  Hello
  The workflow default scan configured to crop the image. Be sure to change the scanning settings to not crop the area swept as follows:

  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab "scan tasks.
  4. Select the shortcut Scan allows to analyze, and then click on edit.
  5. in the section of scanning from an HP device, click the blue triangle or button view details to expand the menu.
  6. in the expanded menu now, open the drop down next to cultures in and set as none or A4.
  7. click OK and try to scan.

  Kind regards
  Shlomi

• Scan from the printer to the pc wireless

  I have officejet pro 8600, it allows to scan to my pc, but I change to a new room and changed the password and now it will print and scan from my pc, but not the printer to the pc, I set myself until I have change the pass with the switch, but now who would not work and now I can't even come... Help please!

  Hello @kimsgirll1999,

  By the sounds of your post, it only appears that all background programs running on your Windows 7 computer is originally interference when trying to scan to your HP Officejet Pro 8600 e-all-in-one printer. Before the reactivation of these background programs can I please have you try the following steps.

  Enable the computer analysis:

  1. click on the HP Printer Wizard on your computer desktop icon:

  

  2. click on Actions of the Scanner, then Manage scanning to computer.

  3. click on Activate to activate the scan function. If the scan function is already enabled, click disable, and then click Activate again.

  4. on the printer control panel, press Scan (), support on computerand then tap the name of the computer that is displayed.

  If the scan of the computer working now, please activate your start-up services through the 'step 5: reactivate MSCONFIGthe steps I described in my post above.

  Once Msconfig services are activated, try to scan from the front panel of your printer to see if your computer is always present.

  Please let me know if this procedure works for you. Good luck!

• delete the shortcut to scan in Officejet Pro 8600

  I'm trying to remove one of the shortcuts by default scan from my printer Officejet Pro 8600. Is this possible?

  No,

  Only custom shortcuts created scan can be deleted.

  Cannot remove the default shortcuts, but you can change only those.

  Shlomi

• Scan from the printer HP for MacBook

  After the Update September 1, 2016 at the HP6500A, the scan from the printer to the computer software has become inoperative.  Printer cannot detect the MacBook Pro.  Can you help me?

  You might have better luck using the image transfer application on the pre installed in your folder scanner Applications.

  Help here > the basics of the Mac: using a scanner - Apple Support

• Start scanning from the computer?

  I have a hp photosmart C5550, when I try to scan to start the scan of the computer says, how can I do?

  Antal Hello

  That article and the instructions are for a different printer and software. You should see 'Manage Scan to Computer' under the 'Actions of Scaner. If you get an error or messages let me know. I noticed you did another post where you mention Windows 7 which is your operating system?

  How to scan from my computer. How can I activate my HP 3050 scanner? Windows 7

  

• I can scan from the printer wireless on my I Pad

  I have a printer of HP Deskjet 3050 a all-in-one wireless and I would like to scan on my I Pad 2?

  Hello

  You can scan from your iPad via the wireless network using the HP Printer Control application:

  https://iTunes.Apple.com/us/app/HP-printer-control/id469284907?Mt=8

  The application is available for download from the App Store, be sure to search iPhone apps as the application compatible with the iPad, but isn't an application native iPad.

  Shlomi

• HP3070 b611all in a printer: HP3070 unable to scan from the printer control panel

  Hello

  Although I can scan a document from my laptop I can't do it from the printer control panel.

  I tried following the instructions in the Support Center
  "HP Deskjet 3070 e - all-in - One Printer Series - how Scan: from the control panel" but I didn't know where I could: ' activate the scan to the computer connection (Windows only).

  Anywhere there is no mention of "Scan" under settings B3070 only in a separate file, HP Scan on my system...

  Thanks for your help so far.  I now have much more HP files/programs that I started with.  What can delete and to be able to continue to print wireless & scan of the computer, or maybe I should ask what files do I need and I can uninstall.

  I ordered the following cable to establish a connection between my laptop and a printer?  I hope it is the right one.

  USB printer cable lead for HP Hewlett Packard and Lexmark A - B

• scanning from hpOfficejet Pro 8610 for OSX ELCapitan

  I can't scan from my Officejet Pro 8610 All-in-one scanner my computer Mac (OSX El Capitan).  It prints well ok.  Someone can help me.  Thank you.

  Hi @Ellen6,

  Thanks for joining the Forums of HP Support for a solution to your problem of scanning.

  I understand that you can print fine on your computer Mac OS X 10.11 El Capitan for a HP Officejet Pro 8610 e-all-in-one printer, but you are unable to scan. I would like to help with that.

  I would like to start by resetting printing Mac system. If you are unsure how, here is an Apple Support document that can help - reset the printing system.

  After resetting the printing system, the printer will have to be added to the printers and Scanners window. You want to make sure that you select the driver "HP OfficeJet Pro 8610 series" instead of the driver "AirPrint" in the menu in the window of printer "Add" drop-down 'use'. Here is a document that can help with this if needed - Add or remove a printer.

  Please let me know if that solves the problem, or if you need assistance.

• can not scan from printer to computer Windows 8.1

  scan from the printer to the computer not windows 8.1

  Hi @skinz

  Thank you for letting me know what HP printer you have.  I'll guess that you receive an error message about a connection error when scanning.

  I've included the document a "Computer no. has detected" or "connection error" message when scanning for HP Officejet 6600 e-all-in-one and 6700 Premium e-All-in-One Printer Series (H711) .  Please click on your operating system and follow the troubleshooting steps.

  Please let me know the results.

• scanning from my pc

  How can I find the screen to scan from my printer hp 5510d series pc, I'm confused... I can't remember where the controls are on the pc...

  Hello

  For Windows, you can click HP 5510 icon on the desktop, and you can see this option in the menu.

  Kind regards.

• Scan from the printer to the phone

  I have a hp envy 4500 and the eprint app on my android phone. It works fine for printing, but it wont let me analyze what I can send it in an e-mail.
  Anyone know if it is possible to do, or do I need a different application to make it work.

  Hello

  It is possible to scan from the application of remote control HP all-in-one.

  You can find the steps listed below:

  http://support.HP.com/us-en/document/c02486319