screen darkens when not plugged in the laptop charger

How do I change setting so that my laptop screen does not turn black when they are not connected the charger

Go to control panel > change battery settings > change Plan settings > drag 'setting screen brightness' to the left to make it dimmer or right to make it brighter > save changes

Tags: Windows

Similar Questions

  • (Redirected) Power adapter green light turns off when the laptop battery is plugged into the laptop and does not load.

    Power adapter green light turns off when the laptop battery is plugged into the laptop and will not charge; If the laptop battery is not plugged into the laptop adapter it's still green and will charge the laptop.

    As you have a laptop, better make this laptop in the computer Forum post here:

    http://en.community.Dell.com/support-forums/laptop/default.aspx

    Tip: when you post a message, preferable to always include the computer model.

    Bev.

  • HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

    HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

    The battery is dead. When I try to turn on the laptop by plugging the AC adapter does not charge or led power LED does not turn on. But when I press the power button, the power, the indicator flashes and turns off (when power adapter connected).

    (1) I tried the press and holding the power button for 30 seconds after removing the battery & AC adapter / CC.

    (2) I tried to change the power adapter too.

    The problem is that it is.

    Your advice is very much appreciated.

    Thank you best regards &,.

    Zia

    Dear customer,

    Welcome and thanks for posting your question on the Forum of Support HP

    It seems that you are not able to turn on the laptop and tried to solve the problem

    Please perform steps listed to find out if it is a hardware or software problem below:

    1. remove all cables and devices, disconnect them and try to turn on the device

    2. check the LED light situation and ensure the action of the spring button / stop is normal

    3 Exchange with a well known power cord and the AC adapter

    4 Pack no adapters are available, check if the power adaptor is slightly warm

    Note: This will give us an indication that the power adapter could be good

    5. do you know if the laptop was in battery or power adapter when you used the last time

    Note: Make sure that there is no spill of liquid or cutting

    6. check if the Port of the AC adaptor is loose/broken

    Note: If the laptop is not on even with a power adapter well known, this confirms the hardware failure with the system board or power DC Circuit

    Hope this helps for other queries to answer the post and feel free to join us again

    * Click on the star of CONGRATULATIONS on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you

    K N R K

    I work on behalf of HP

  • Upgrading from Windows XP to Windows Vista and now I can not find wifi or when I try to connect to the internet, I get an error, "a cable is not plugged on the network card.

    Wireless connections

    I upgraded my dell vostro laptop 1000 Windows xp to vista and now I can not find wifi or when I try to connect to the internet I get an error, "a cable is not plugged into the card network", "connection to the Local network. Everything worked fine until I upgraded. I noticed in my device manager, the driver for the system controller and core network are not installed. Could it be the problem? Is someone can you please help me understand this?

    Hello

    I noticed that you had created another similar to this question. Have you tried the steps suggested in this post?

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/how-do-i-put-WiFi-back-on-my-PC-after-upgrading-to/c9b90ec1-8393-4B57-b4af-2fbeb802af58

    You can also try the following methods and check if it helps.

    Method 1:

    Update a network adapter driver.

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    Method 2:

    Troubleshoot network adapter problems.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  • I just got an iPhone 6 and when I plugged in my laptop, he asked if I wanted to restore my new phone. I said yes! But unfortunately chose the wrong backup restore with. Is there a way I can go back to how my phone was before?

    I just got an iPhone 6 and when I plugged in my laptop, he asked if I wanted to restore my new phone. I said yes! But unfortunately chose the wrong backup restore with. Is there a way I can go back to how my phone was before?

    Yes, you can as long as you understand that you will lose everything that is currently on the phone.

    (1) settings > General > reset > erase content and settings

    That will make the iPhone as new.  Then, during the installation process it again once will ask you if you want to restore from an existing backup.  You can then restore the scheduled backup.

  • you have the problem when I plug in my laptop, the brightness is low.

    you have the problem when I plug in my laptop, the brightness is low.

    No, when I plug it into electricity, it's low.

    It's usually the other way around... check the power settings. If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog

  • When I'm looking online, I get the error message saying: my graphics card is not responding and the laptop stops or gets himself.

    Hello

    I have a fujitsu lifebook p series windows 7 and every now and then especially when I am looking online I get the error message saying: my graphics card is not responding and the laptop stops or gets himself.  I challenged tech stores to be looked at, but they were not able to fix it. Does anyone have any suggestions? Thank you
     
    Original title: help again...

    I have moved your question to area drivers & hardware.

    If your PC uses the Intel chipset, see this: http://communities.intel.com/message/172740#172740

    Updated drivers can be made of:

    https://Downloadcenter.Intel.com/default.aspx

    Best bet may be to contact the vendor of PC.

    -steve

  • Yoga, 13 screens darkens when unplugged

    I had only my Yoga for a few days and love it. I noticed that when I unplug it the screen darkens. I have normal, predictable courthouse or a sign of a problem? Thank you

    Hi scott_bartis,

    the reason is windows or lenovo energy management changes the settings when you plug-in the AC power. Please, try to change the settings first.

  • HELMET No. Smartphones blackBerry icon when I plug in the BB Bold 9900 helmet. Help, please!

    Hello

    I just got my new BB bold 9900. Has updated the OS to v7.1.714. Now I see not a helmet on the homescreen icon when I plug the headphones of BB. Although I get sound when I plug from the 3.5 mm plug.

    Another issue is when I receive a call I am not able to hear the call, ringing on the headset, rather that I hear from the speaker as I would when no headset is plugged.

    I heard that it is a common problem when an upgrade of the OS is made. Is there a solution? Help, please!

    Hello crazygamerg7,

    Welcome to the BlackBerry support community.

    Thank you for your question about the helmet on the BlackBerry 7.1 software feature.

    The headphones icon should only appear in within the phone application and not on the home screen when connected and on a call.

    The ringtone will also go through the speakers of the device and not on taking 3.5 mm connected headphones. This is normal.

  • Hi me Mamadou Moustapha I bought apple that i phone 6s a few days find out who the best phone of the world, because the day I bought it, I had questions on screen and when I went to the service center, they said they're going to update they have updated o

    Hi me yedess apple that i 6 s phone few days back knowing have the best phone in the world since the day I bought that I have questions on screen and when I went to the service centre they said they're going to update, I bought they updated after that I have the same problem now they say they're going to fix very terrible situation for apple this new product which has manufacturing defect they will repair, I asked to change device they deny because they want to fix m single i face the problem of the first day of the customer are powerless and that they only make just crazy.

    It's what warranties are for. If you bought the phone from Apple or an Apple authorized reseller, iPhone, you have 14 days to return it for a refund. After that the Bank should replace the phone. If you did not buy from Apple or a shop authorized, you must respect the terms of this store. However, Apple will always replace the phone, if you contact them directly.

  • How to stop screen flashing when I go to the itunes store?

    How to stop screen flashing when I go to the i tunes store?

    It is not very useful, but it seems that this problem has been resolved by only showing is not the store at all!

    Not 'progress' I was looking for. Issue still ' live'.

  • My screen saver does not work all the time, usually this seems to happen once the aircraft stopped in the energy saving mode.

    Original title: my screensaver does not work all the time

    My screen saver does not work all the time.  First time I have turn on computer, it works OK.  Later in the day, this isn't.  Usually, this seems to happen once the aircraft stopped in the energy saving mode.  After the reactivation of the computer (do not), the screen saver does not work when it should. How to run all the time?  I am running Kapersky Internet Security 2011.  This would be closed by the screen saver?
    Thanks, Garybuyit

    Hi garybuyit,

    Thanks for posting your question in the Microsoft answers Forums.

    Just so I'm clear, updated you the graphics cards in Device Manager? You have access to a Windows XP installation disc. If so, follow the steps in this document to make a scan of the SFC. This analysis will attempt to repair or replace any missing or corrupted system files.

  • I can't hear any sound in my headset when I plug in my laptop which has Vista SP2 installed.

    I can't hear any sound in my headset when I plug in my laptop which has Vista SP2 installed. While my speakers work well, I cannot hear any sound in my headphones every time that I plug them in. And whenever I take off the helmet, I can hear clearly. However the same headphones work with another machine perfectly. I tried all the troubleshooting guides, but can't get my headphones to work with my laptop. Appreciate if a solution can be provided.

    Hi reddys_b,

    1 have. what measures you tried to solve the problem?

    2 are you using a USB one or one that has a microphone or headset right?

    Step 1: Start by checking if the default sound device is set correctly.

    a. Click Start type sound in the box start the search.

    b. click sound in the results of search at the top of the start menu.

    c. click the reading notice the check mark next to the default device. For most users, the default device is speakers. Change the default device with headphones.

    d. Select the audio device you want to the default audio device and then click on set as default.

    e. click OK to save your settings and close the sound dialog box.

    Step 2:

    You can also try updating the sound card drivers and check.

    For more information, you can consult the following link:

    Tips for solving common audio problems

    http://windowshelp.Microsoft.com/Windows/en-us/help/1e87a3e8-c0e8-49af-980F-9eb6686f42d21033.mspx

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • ProBook 4530 s: grinding noise near the vents when I turn on the laptop.

    Sometimes when I turn on the laptop, a loud grinding noise is heard from the left corner, near the vents.  I think that's probably the fan.  I turn off the laptop because it doesn't seem like grinding stops.  Then when I turn it on again, grinding noise disappeared.  The fan needs to be replaced, or when the fan needs to be replaced?  Is this easy to do?

    Alternatively, the problem could be something else?

    MContrary wrote:

    I see that there is a video on YouTube for laundry s my exact machine, HP ProBook 4530 fan.

    I guess I'll try to do that, but the noise I hear is very strong, as something very bad is grinding

    This could be the lack of fan or some a little debri is inside the unit that should not be there.

  • Sun disk MemoryStick pro duo does not fit into the laptop

    My disc solar memory stick pro duo does not fit into the laptop Envy nor the memory stick duo adaptor. How can I download my photos?

    Hello

    Whay is your cell phone? Many of them does NOT support memory stick family devices. You can connect your device to your computer OR you can go out and buy a card reader (USB connector, for about $ 10 to $ 15) that supports the USB key and plug it into the USB port on your laptop.

    Kind regards.

Maybe you are looking for

  • upload of a file

    the following code works in IE but not in Firefox - unless I have add the alert as in the snippet below: function triggerFileUpload() { document.getElementById("File1").click(); alert(document.getElementById("File1").value); } Note: Firefox opens the

  • angelsensor

    I have an angelsensor bracelet, can I use the healt of ios app 9 with the angelsensor?

  • It supports audio tunneling?

    The nexus 6 does support audio of tunneling as the nexus 5?

  • Availability of BBC iplayer on Apple TV 2nd new

    Is BBC iplayer now available on every generation of Apple TV, or only available on the most recent version?

  • settings on the router for ITouch

    I have tried to connect my new ITouch with my home wireless, but will have many problems.  It does not accept the password.  I read some of the discussions, but there are so many things listed there.  Right now my router, a WRT54G, is defined as 64-b