Screen.Paint see the empty bitmap

Similar Questions

• Transparent screen to see the screen below

  Is it possible to make a transparent background, so you can see the fields on the screen AND see the screen below, if it is not a field on the top screen?

  Or is there a good way to size and position a screen to accomplish the same thing.

  Thank you!

  Too bad, I had a stupid syntax error. That's what I thought, it should be.

  MenuScreenBackground = BackgroundFactory.createSolidTransparentBackground (0 x 00999999, 0);
  menuscreen.setBackground (MenuScreenBackground);

• Save as function opens a window full-screen stop see the doc, I'm trying to save

  When I use "save under" on a document it opens a window full screen (so I can choose where to save it) but it stops me see the document that I am recording so I memorize the title - this used to happen with Windows XP. Anyone got any ideas how I can get it to open a small window (mobile)? There is no option minimize!

  I assume you mean a Microsoft Word using Microsoft Word document.  If so, please repost your question in the Discussion of the Office group at: http://www.microsoft.com/office/community/en-us/default.mspx?dg=microsoft.public.word.docmanagement&lang=en&cr=US where issues of speech specialists will be more than happy to help you with your problem.  Don't forget to give them the version of Word that you use in your message.

  If this is not the case, what program are you talking about (name and version)?  This happens with other programs?  Have you tried to uninstall and reinstall the program to see if that solves the problem?

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• See the empty table if there is no data

  Hello
  I have a line chart in a dashboard page, which shows sales of the company in a given country (chosen by guest). When I choose a country that has no data, the system displays message: "no results - specified criteria result in all data. I want that in this scenario, appears an empty array. Is it possible? How do I change my application? Thank you
  
  Giancarlo

  OK, in this case, you must change the join in the repository. Let's say you have a table 'months' and a fact table. Join the two tables, but use a right join (where the table is the table with the months). This way, you will get all values in the table of months, associated with the data in the fact table. During these months does not, you will see the value null. You can set a zero with a case statement.

  I hope this helps.
  J. -.

• Anychart, see the empty diagram?

  Hello
  
  APEX 4.0.2 Oracle 10 g r2.
  
  Sorry for asking here, but I can't find any support on the Web Anychart site forum.
  
  So I need to view a diagram in my page and as you know when the query returns no data, the chart is not displayed, a message "no data found" appears rather normal.
  
  But I would like to know if it is possible to display an empty diagram instead, with the whole legend.
  
  An example of what I get:
  
  full scheme (when the query returns all values)
  schema-incomplete (when the query return values)
  diagram empty, when the query returns null)
  
  All the side by side to see the difference
  
  Don't you think it's possible?
  
  The following XML code that I use for now:
  

  <?xml version = "1.0" encoding="utf-8" standalone = "yes"?>
  <anychart>
    <settings>
      <animation enabled="false"/>
      <no_data show_waiting_animation="False">
        <label>
          <text>Aucune données à afficher.</text>
          <font family="Verdana" bold="yes" size="10" />
        </label>
      </no_data>
    </settings>
    <margin left="0" top="0" right="0" bottom="0" />
    <charts>
      <chart plot_type="Pie" name="chart_1848708574694222"> 
        <chart_settings>
          <title enabled="false">
                   <text>Opération n° :OP_PARENT_ID</text> 
               </title>
          <chart_background>
            <fill type="Solid" color="0xffffff" opacity="0" />
            <border enabled="false"/>
            <corners type="Square"/>
          </chart_background>
          <data_plot_background></data_plot_background>
            <legend enabled="true" ignore_auto_item="true" position="Bottom" columns_padding="0" rows_padding="0" align="Center" width="100%">
            <title enabled="false" />
              <columns_separator enabled="false" />
            <items>
              <item source="points"/>
            </items>
            <format><![CDATA[{%Icon} {%Name}{enabled:False}]]> ({%YPercentOfSeries}{numDecimals:1,decimalSeparator:.,thousandsSeparator:\,}%)</format>
          </legend>
        </chart_settings>
        <data_plot_settings enable_3d_mode="true" >
          <pie_series style="Aqua">
            <tooltip_settings enabled="true">
              <format><![CDATA[{%Name}{enabled:False}]]> : {%Value}{numDecimals:0,thousandsSeparator:\,} mesures</format>
              <font family="Tahoma" size="10" color="0x000000" />
              <position anchor="Float" valign="Top" padding="10" /> 
            </tooltip_settings>
            <label_settings enabled="true">
              <position anchor="Center" valign="Center" halign="Center" padding="0"/>
              <background enabled="false"/>
              <font size="9" color="White" bold="no" />
              <format><![CDATA[{%Value}{numDecimals:0,decimalSeparator:.,thousandsSeparator:\,}]]></format>
            </label_settings> 
            <pie_style></pie_style>
            <marker_settings enabled="False" >
              <marker type="None" />
            </marker_settings>
            <connector color="Black" opacity="0.4"/>
          </pie_series>
        </data_plot_settings>
  #DATA#
      </chart>
    </charts>
  </anychart>

  Thank you.
  
  Yann.

  Hello Yann,

  What is your SQL?

  It will return a 0 or a null value for a slice of pie that were not?

  For example, the Distances. In your first example, it has a value of 27 (32.5%), in the other two examples, it seems to have a value of 0. Is it true, or is the Null value?

  Austin

• How to split the screen to see the 2 different tabs side by side

  How to open an instance of FF and open 2 tabs visible side by side.
  Or is this not possible and I must have two instances of open FF size screens for half the screen?

  • Fox Splitter: https://addons.mozilla.org/firefox/addon/fox-splitter/
  • Split Pannel: https://addons.mozilla.org/firefox/addon/split-pannel

• Installed the programs see the emptiness on the Satellite A350-212

  Hello

  I hope someone can help here. My brother left England in the Turkey a couple of years ago and his cell phone, which was the United Kingdom's irreparable, so he bought one in Turkey, A Toshiba Satellite A350-212 and has problems with the downloads. For example he downloaded a free trial of Coverxp and he seemed to download ok and asked if he wanted a shortcut on the desktop. He said yes to the shortcut, and as I say, it seemed to have installed ok.

  The iicon office never appeared and the Coverxp in all programs also shows empty.
  This is the case for most of the things it has downloaded, such as the trial version of Winrar.
  In programs and features uninstall, applications are here. In my view, this could be a security problem.

  All the things he tried to install it I installed on Vista without any problems

  If anyone can help with information ill be most gratefull

  Thank you.

  Hi mate

  First I put t think it's a problem of Toshiba.
  I recommend saving the downloaded packages somewhere on the second partition.
  Then go to that partition and unzip the package.
  Then follow the installation instructions.

  By the way; shortcuts on the desktop can be created manually.
  Simply right-click on desktop and create a new shortcut and point to the exe of the installed software.

• I start up it will show Windows Vista family premium down then in the middle of the screen will see the Please wait

  I have an Aspire X 3200 desktop PC. And I also have Windows Vista Home premium. When I boot it it will show that Windows Vista family premium down then in the middle of the screen will show it please wait... but it won't load at all. It will do nothing and just freeze like that all the time. Like now, I have to use my laptop able to do anything. I hope I can get help because I would like to use my desktop instead of laptop.

  Hello

  Have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Step 1:

  Start in safe mode and check if the problem persists there.

  How to start Windows vista in safe mode:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If the problem does not persist in safe mode, and then put the computer in a clean boot state and check if that helps.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135 Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 2:

  Run the Startup Repair tool and check if it helps.

  Startup Repair: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Method 3:

  If method 1 and method 2 has not helped, then perform the system restore from the recovery system to a restore point option when the computer was working fine.

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Hope the information is useful.

• How to convert the object Bitmap to byteArray.

  Hi all

  I had a problem in the conversion of the bitmap object to. BMP file.

  (Real need: capture the screen shot and convert that turned to the screen.) BMP image and I have to keep this image in the SCARD

  I shouldn't use any PNGEncodedImage or JPEGEncodedImage )

  I capture the screen shot using the

  Bitmap BM = new Bitmap (width, height);

  Display.screenshot (WB);

  to get the data from [] bytes of this bitmap object that I use

  Byte [] _bytes = getBytesFromBitmap (bitmap);

  public byte [] getBytesFromBitmap (Bitmap bmp) {}
  try {}
  int height = bmp.getHeight ();
  int width = bmp.getWidth ();
  int [] rgbdata = new int [width * height];
  ByteArrayOutputStream Bos = new ByteArrayOutputStream();
  DataOutputStream back = new DataOutputStream (bos);
  Graphics g = new Graphics (bmp);
  bmp.getARGB(rgbdata,0,width,0,0,width,height);
  for (int i = 0; i)< rgbdata.length="" ;="" i++)="">
  If (rgbdata [i]! = - 1) {}
  dos.writeInt (i);
  back. Flush();
  //l++;
  }
  }
  Bos.Flush ();
  Return bos.toByteArray ();
  }
  catch (Exception ex) {}
  Dialog.Alert ("getBytesFromBitmap:" + ex.toString ());
  Returns a null value.
  }

  If I use this byte array in the Sub statement I get the "IllegalArgumentException".

  BMPEncodedImage.createEncodedImage (_bytes, 0, _bytes .length);

  all can help me how I can get the byte [] data from the bitmap object?

  import java.io.ByteArrayOutputStream;import java.io.DataOutputStream;import java.io.IOException;
  
  import javax.microedition.lcdui.Image;
  
  /** * @author Samuel Halliday */public final class BMPGenerator {
  
      /**     * @param image     * @return     * @throws IOException     * @see {@link #encodeBMP(int[], int, int)}     */    public static byte[] encodeBMP(Image image) throws IOException {        int width = image.getWidth();        int height = image.getHeight();        int[] rgb = new int[height * width];        image.getRGB(rgb, 0, width, 0, 0, width, height);        return encodeBMP(rgb, width, height);    }
  
      /**     * A self-contained BMP generator, which takes a byte array (without any unusual     * offsets) extracted from an {@link Image}. The target platform is J2ME. You may     * wish to use the convenience method {@link #encodeBMP(Image)} instead of this.     * 
       * A BMP file consists of 4 parts:-     * 
       * 
  header
       * 
  information header
       * 
  optional palette
       * 
  image data
       * 
       * At this time only 24 bit uncompressed BMPs with Windows V3 headers can be created.     * Future releases may become much more space-efficient, but will most likely be     * ditched in favour of a PNG generator.     *      * @param rgb     * @param width     * @param height     * @return     * @throws IOException     * @see http://en.wikipedia.org/wiki/Windows_bitmap     */    public static byte[] encodeBMP(int[] rgb, int width, int height)            throws IOException {        int pad = (4 - (width % 4)) % 4;        // the size of the BMP file in bytes        int size = 14 + 40 + height * (pad + width * 3);        ByteArrayOutputStream bytes = new ByteArrayOutputStream(size);        DataOutputStream stream = new DataOutputStream(bytes);        // HEADER        // the magic number used to identify the BMP file: 0x42 0x4D        stream.writeByte(0x42);        stream.writeByte(0x4D);        stream.writeInt(swapEndian(size));        // reserved        stream.writeInt(0);        // the offset, i.e. starting address of the bitmap data        stream.writeInt(swapEndian(14 + 40));        // INFORMATION HEADER (Windows V3 header)        // the size of this header (40 bytes)        stream.writeInt(swapEndian(40));        // the bitmap width in pixels (signed integer).        stream.writeInt(swapEndian(width));        // the bitmap height in pixels (signed integer).        stream.writeInt(swapEndian(height));        // the number of colour planes being used. Must be set to 1.        stream.writeShort(swapEndian((short) 1));        // the number of bits per pixel, which is the colour depth of the image.        stream.writeShort(swapEndian((short) 24));        // the compression method being used.        stream.writeInt(0);        // image size. The size of the raw bitmap data. 0 is valid for uncompressed.        stream.writeInt(0);        // the horizontal resolution of the image. (pixel per meter, signed integer)        stream.writeInt(0);        // the vertical resolution of the image. (pixel per meter, signed integer)        stream.writeInt(0);        // the number of colours in the colour palette, or 0 to default to 2n.        stream.writeInt(0);        // the number of important colours used, or 0 when every colour is important;        // generally ignored.        stream.writeInt(0);        // PALETTE        // none for 24 bit depth        // IMAGE DATA        // starting in the bottom left, working right and then up        // a series of 3 bytes per pixel in the order B G R.        for (int j = height - 1; j >= 0; j--) {            for (int i = 0; i < width; i++) {                int val = rgb[i + width * j];                stream.writeByte(val & 0x000000FF);                stream.writeByte((val >>> 8 ) & 0x000000FF);                stream.writeByte((val >>> 16) & 0x000000FF);            }            // number of bytes in each row must be padded to multiple of 4            for (int i = 0; i < pad; i++) {                stream.writeByte(0);            }        }        byte[] out = bytes.toByteArray();        bytes.close();        // quick consistency check        if (out.length != size)            throw new RuntimeException("bad math");        return out;    }
  
      /**     * Swap the Endian-ness of a 32 bit integer.     *      * @param value     * @return     */    private static int swapEndian(int value) {        int b1 = value & 0xff;        int b2 = (value >> 8 ) & 0xff;        int b3 = (value >> 16) & 0xff;        int b4 = (value >> 24) & 0xff;
  
          return b1 << 24 | b2 << 16 | b3 << 8 | b4 << 0;    }
  
      /**     * Swap the Endian-ness of a 16 bit integer.     *      * @param value     * @return     */    private static short swapEndian(short value) {        int b1 = value & 0xff;        int b2 = (value >> 8 ) & 0xff;
  
          return (short) (b1 << 8 | b2 << 0);    }
  
  }
  
  Found form the Link mentioned below:
  
  http://javablog.co.uk/2007/12/26/j2me-bitmap-encoder/
  

• How to see the size of the messages in mail for mac

  I need to clean up some of the larger emails since my mac mail. I can not configure a screen I see the size of the message, but it's a sorting option

  

  Select "size".

  

• Firefox does not open in full screen on the task bar and I have to go over it to see the web page.

  Firefox does not open in full screen on the task bar and I have to go over it to see the web page.

  Firefox window is sometimes "off screen" somehow. Often, you can force it to appear on the screen by right clicking on the thumbnail image just above the taskbar and choose expand. Does it work?

  A possible cause for this is that the file that stores the positions and sizes of window is corrupt. You can delete this file and Firefox will return to standard window resizing.

  #1 method: If you can get a zoomed window:

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

  #2 method: If you can not get a Firefox window for all:

  Close Firefox by right clicking the icon in the taskbar > close all windows.

  Using the Run dialog box (windows key + R) or the start search bar menu type or paste the following and press Enter to drill down to the profiles folder:

  %APPDATA%\Mozilla\Firefox\Profiles
  

  Here you can see a folder - in this case, double-click that - or more than one case - in this case, double-click on in what looks like the most recently updated.

  Scroll down and rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

  Then, to re - light bars, you can use one of the following methods to view the list of the toolbar, and then select the desired bars it:

  • Right click on a place empty on the tab bar (or the button '+')
  • Press the Alt key to activate the classic menu bar > view > toolbars
  • in customize mode > show/hide toolbars (see: Customize Firefox commands, buttons, and toolbars)

  To activate the menu bar, toolbar bookmarks or other bars, click it in the list.

• I want to max my screen to be able to see the images in the messages. The ' to, subject, to and BCC occupy 25% of the screen - one under the other.

  When I view a message it is a title showing the ' to, subject, to and Bcc' message under each other in a group which occupies about 25% of the screen. This prevent me to see a complete picture of the message. Can not change this option for do not show this information at all because it is used to occupy a large part of the screen?

  Not being able to increase the resolution will mean less can be displayed, but obviously, it is a personal thing and you should be able to see the screen comfortably.

  However, I noticed your picture looks like quite like mine, although similar.

  The pale blue bar at the top of the tab should display icons "Mail Toolbar" which does not appear in your screenshot.
  It should have these buttons or icons for example: get Messages, write, address book, Menu icon and research.
  If it has been disabled, then the pale blue box would not be showing. Thus, it is a query.

  Q: do you have 'tailor-made' bar messaging tools to remove the icons from buttons?
  Customization allows you do drag icons on and off the e-mail toolbar. Do you have this is thinking he might save you space, but in fact you still have the domain - the mail toolbar, but it is now empty?
  If you have removed them in order to create a space, I would say that you put all the icons back, so that they are available. It is easier to hide the view by disabling the e-mail toolbar.

  View > toolbars > mail toolbar
  Q: is the messaging on or off toolbar?

  Disabling should you save space by deleting the pale blue box above, but it still won't create the kind of space you're talking about. Baring in mind that each image can be a different size.

  The area with of, subject, to and Bcc, should also show several buttons for example: answer, before, Archive, Junk, Delete and another button called 'other Actions '. These buttons appear on the right side. Maybe you have them, but they cropped in the displayed image.
  If the area to which you refer has done more than just the titles. It also offers you a way to click on for example; Respond directly from the email that you look.

  What version of Thunderbird do you use?

  Have you tried the 'Conversations' addon because this will reduce the headers?

  There is also another Addon called "Headers Compact" will be also reduced the size of the headers:

  • https://addons.Mozilla.org/en-us/Thunderbird/addon/compactheader/

  But you are only going to win some space which cannot result will be enough to see the large embedded images.

        -------------------------------------
  

  The person who transmits the image should really be sending these images in the form of attachments, so that you can choose to view by using the correct application of the program and/or reduce the size of the screen if they are incorporating the image in the content.

  If they refuse to send the image properly and persist in sending large embedded images, then you may not be able to see full images without scrolling you have no control over how they sent the image; It could be small or huge, which will affect the ability to view an image all at once.

  For large images nested:
  The best option for you would be to right click on the image and use "save image under" choose to save the image to your computer in a right example folder: Photos. Then open and view them using an appropriate such as "Windows photo Gallery" or similar application.
  So if you choose to delete the email you don't waste the image she's saved elsewhere on your computer.

• where can I see the photos 'print screen '?

  where can I see the photos 'print screen '?

  They are in the Clipboard. If you paste into a paint program (type mspaint into Start - Run all programs - accessories -) or a text editor (Start - All Programs - Accessories - Wordpad). Also see the tool captures to capture the screen (Start - All Programs - Accessories - Snipping Tool).
   
  Copy the screen [Prev |] Next | Content]

  PRT Scn	Copies the entire screen to the Clipboard as a graphic or the screen with the mouse if you are using multiple monitors. Use MS Paint to paste the picture. It is also known under the nameof Office Snap. According to the key parameters of Prt Scn tab Misc properties of a Dos program, a program back can still print on printer Prt Scn keyed.
  ALT + Prt Scn	Copies the active window to the Clipboard in the form of a graph. This is also known as theWindows Snap.
  CTRL + Prt Scn	Copies the entire virtual screen when you are using multiple monitors in the Clipboard in the form of a graph. Unlike the other two screens to Print that precedes this one doesn't seem to have a name, or if so, it is not listed in the header of the window files.
  CTRL + Alt + key number minus button	Copies the active window to the Clipboard of remote desktop in the form of a graph (same as thePrt Scn locally)
  CTRL + Alt + number Pad Plus key	Copies the entire screen to the Clipboard in office to distance in the form of a graph (same asAlt + Prt Scn locally)

  Such programs that Outlook Express do not allow paste not web graphs. Paste into MS Paint andrecord under a web graphics. If the screenshot by email sending save it as a jpeg, gif or png file before sending (in MS Paint,file - save as, and then choose a format in Save As Type). The color isn't usually important for the screenshots is a way to make a really small file save as a GIF (this reduced to 256 colors), and then save the Gif to Png (lossless and better than Gif compression) or Jpeg (lossy).

  To take screenshots of the menus in the current use of the window the Alt key and hold it down during the entire procedure. ALT + a touch of letter to access the menus, then the keysdirection to move the selection, then Print Screen. Release Alt.
  --
  .
  --

  "Chrystalstrick" wrote in message News: a6a8f42c-03e9-429 d-91e8-6bca342fa0c6...

  > where can I see the photos 'print screen '?

• Could not paste bitmap screenshot in Paint, paste the function not active

  Vista paint non-active control V to paste the screenshot.  Why?

  Thanks for the suggestion, but...

  No joy - open Paint, back at the office, shift F11 (Prt SCRN), returned to paint, paste the icon is not active and V control has no effect.

  In the paint Edit menu there is a "paste from" icon that is active, but I don't know where the Clipboard is and can't find it. This folder contains the bitmaps on Clipboard?

  =========================================
  Sorry... I do not have the answer. As far as I KNOW... each screen
  shooting overwrites the previous one... so there is only one at a time.

  The tool Vista capture might be worth a try.

  Use capture tool to capture screenshots
  http://Windows.Microsoft.com/en-us/Windows-Vista/use-Snipping-Tool-to-capture-screen-shots
  (Vista Home Premium, Business, Ultimate, Enterprise)

• Screen reader works but see window empty when you open a Word document

  Original title: I am currently setting up my screen reader, Windows Vista Home Edition and have successfully by reading everything except the content of windows. Example, you open a word document and I see the text, but the screen reader sees an empty window.

  Thanks for any help you can give.

  Hi MacGyver Fan,

  Narrator Windows you use? Let me know if you are using a third-party application

  You can follow the steps mentioned in the link below

  Troubleshoot Narrator

  For more information, please visit the link below

  Hear text read aloud with Narrator

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.