SD card connection problem

Similar Questions

• data card connection problem

  use a 1020-21 model adsl modem I want to connect with the data card to the adsl modem how to connect & how to use the data card internet only reliance I use pls give providers of wide band good solution not available in my region pls how I connect to the data card into the usb port on the modem available also in modem

  Hello

  Since this forum is supported only for the Windows operating systems, so I suggest to consult with manual or contact the manufacturer of the modem and check if it helps.

• Internet connectivity problems Acer caused by the use of the wrong driver/adapter. Packet scheduler miniport problems.

  I have an Acer Aspire One A150 Netbook with Windows XP home SP3 and I have internet connectivity problems. In my device manager, there are 5 network adapters: 2 seems to be your run of the mill Atheros wireless and Realtek PCI. those who are very good. However, the 3 Planner package miniports have the icons of exclamation mark on them. Ive tried everything I have kno how to do including trying to reinstall on the Acer site. Help?

  Hi Olesauce21,

  1. have you done any hardware changes or software on your computer before this problem?

  2. you receive an error message when you connect to the internet?

  You can follow this link & check if the problem persists:

  How to solve the possible causes of Internet connection problems in Windows XP?

  
  Reference: Wired and wireless in Windows network connection problems

  Advanced Troubleshooting for Windows workstations network card

  Hope the helps of information.

• Trident video capture card connected via USB 2 not working not properly under XP

  I use a Trident card connected via USB 2.0 video capture and I had a weird behavior:

  -sometimes not detected (not included in the list of devices)

  -sometimes not recognized (unknown device)

  -sometimes not start (Code 10)

  -sometimes works very well

  I used a USB Tracker to study the issue and found out that the usbehci driver is not able to activate the USB port.

  The message sequence is as follows (when it works):

  Get the status of the Port (4) - success

  Serial Port (4) feature, Reset - success

  Get the status of the Port (4) - success

  | - Port is enabled

  This is when it does not work:

  Get the status of the Port (4) - success

  Serial Port (4) feature, Reset - success

  Get the status of the Port (4) - success

  | - Port is NOT enabled

  Function Clear (4) Port, connect to state change - success

  Get the status of the Port (4) - success

  Serial Port (4) feature, reset the change - success

  I have more tracks, but I don't know if this is the right place to post.

  Thank you in advance to anyone willing to help me.

  Sincerely

  Andrea

  * original title - device USB not recognized or not started or sometimes work *.

  This link might be useful for:

  Advanced troubleshooting tips for General USB for Windows XP problems

• WRT160NL connection with n and USB connection problem

  Hi guys,.

  I have the Linksys WRT160NL router and I have two fundamental problems with that:

  1. I have a laptop HP with n on its wireless card connection. (it's an HP probook 4720 s). So I know that this laptop has ability. n I have the most recent driver vor he 3.1.18. The thing is that my Linksys router does not transmit sound wireless n, just g...

  What should I do to make it work with n as well?

  2. the second issue is that the USB connection is working in a very strange way. I have attached an ADATA with USB 3.0 HDD external, even. He works in 2.0.

  I have a lot of WAV files on it and when I stream to my receiver files pay with much intrerupptions, break ups. MP3 work very well.

  I don't know what to do to solve this 2 problems... Maybe someone could help me...

  Thank you

  Try changing some settings on the router wireless.

  Connect the computer to the router with the Ethernet cable. Open the router configuration page. Go to the wireless tab and the manual value configuration view. Change the channel to 11 wireless. Make sure that the network is set to mixed. Save the settings.

  Go to wireless security sub tab and change the wireless WPA2 with AES security mode. Save the settings.

  Click the tab under advanced wireless settings change the tag to 75 interval, RTS threshold and fragmentation to 2304. Save the settings. Now try to connect to the network again.

• Home wireless network connection problems

  What should I do if I normally connect to the wireless network does not appear?  It is not a network card problem, because I can connect to other wireless and school and other places.  I tried to reset the router, ping and by unplugging and seeing what I could understand on the computer at home, but nothing does.  Any ideas or suggestions would be greatly appreciated.

  Thank you.

  Hello

  Have you tried other computers to connect to your router? You use both wire and wireless
  connection?

  Unplug the modem and Router 3 + minutes. And then reconnect the modem - when it is running
  Plug in the router - when it is running - restart the computer. This is known as a hard reset.

  Check with your router manufacturer support.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

• Pavillion G6 2014tx: wireless connectivity problems

  Since the last 2-3 months, my wireless connection does not work correctly. This happened right after that I did the partitioning in the D drive (I don't think this is the main cause). What is happening is that, all of a sudden when internet does not bar shows signs of yellow warning and 'tells' LIMITED ACCESS wireless network. When I try to solve problems, it will give no problem. Then in Device Manager, I tried to uninstall and install again, the internet worked for a while, and still the same problem occurs. When I tried to call to the service center, they told me that I have to buy CDs to retrieve a value of rs500 because I did not these recovery disks. I'm in serious trouble please help...

  I also tried to update latest driver frm net, even if the problem does not get resolved. I also tried to reset the TCPIP in cmd prompt, but it worked for 2-3 days and still the same problem happened...

  Hi there @Parthsagar2010

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you are having problems with your wireless connection, and I am happy to help you with this.

  I realize that you mentioned the update of your driver from the internet, but just in case, here is the page drivers. There are several pilots possible depending on what card you have.

  HP Pavilion g6-2014tx Notebook PC - software & drivers

  The following pages are useful for troubleshooting wireless connectivity problems.
  Troubleshooting your wireless network and Internet access (Windows 7)

  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget the network: (Windows 7)
  1. press start.
  2. tap manage wireless networks, click on the application at the top of the start menu.
  3. right click on the network, and then click on remove network.
  4 confirm the warning by clicking OK.

  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

• Connection problems wireless Broadcom 1704 after upgrade to windows 10

  Connectivity problems after upgrade to windows 10 intermittent wireless;  Have an Inspiron 5748 with adapter Broadcom 1704.  Driver is up to date: 7.35.295.0.  Diagnostic shows no problem with the unit.  Will be generally connect to the network, but the connection is deleted intermittently.  Troubleshooting to solve using leads to restore connectivity, but it will then drop again intermittently.  Never experienced problems before windows upgrade 10.

  steveshuff,

  Here are a few parameters to change on your adapter wireless for better performance.

  Turn on and off then on all devices on the network

  1. Turn off the power to the broadband modem and let the modem broadband disconnected for at least 3 minutes.
  2. Shut down all computers that are connected to the network.
  3. Remove power from the wireless router.
  4. Check that a network cable is connected the modem to broadband in the Internet or the wireless router's WAN port.
  5. Check that no series cables or USB are connected to the Modem on broadband.
  6. Connect the power supply to the modem broadband. Wait at least 2 minutes for the Broadband Modem to initialize.
     (If the Modem does not provide Internet connection successfully, unplug the Modem. Wait at least 5 minutes, then plug the Modem back.)
  7. Connect the power supply to the wireless router. Wait at least 2 minutes for the wireless router to initialize.
  8. Turn on the computer and try to connect to the Internet.

  Difficulty of wireless network connections

  Turn off airplane Mode

  For Dell Wireless adapters:

  1. In the Search box, type Device Manager.
  2. Press or click (Control Panel) Device Manager.
  3. In the Device Manager window, click on the sign of the arrow next to network adapters.
  4. Double click or double-click the Référence Dell Wireless WLAN Card.
  5. Click the Advanced tab.
     Note: These options are not available according to the installed wireless adapter.
  6. In the property: box highlight AP Compatibility Mode, select broader compatibility under value: from the menu drop-down.
  7. In the property: box, highlight the Minimum energy consumption, select disabled under value: from the menu drop down.
  8. Click OK.

  For me, to help troubleshoot, please click on my DELL-Jesse L and send me a private Message with the number of Service Dell and your Dell order number.

• Wireless network connection problem

  Nice day

  I have a wireless network connection problem and I ask for help to resolve.
  What surprises me that this problem appeared suddenly, I used to connect to the WIFI correctly but two days ago my laptop could not connect to the WIFI and more.

  Other devices and computers connect with success so I think that the problem in my laptop.
  I don't have any changes on my laptop or windows, antivirus, drivers... updates or installed new software.
  Troubleshooting of Windows detected 'router or access point issues '.
  -Reset the router does not resolve the problem
  -Network adapter is enabled.
  -State of wireless card "working properly" and "update".

  I read a solution on this site, which was to change the properties of the wireless adapter, but the changes mentioned does not appear in the pilot of my laptop...

  * My laptop info. :
  DELL INSPIRON 3521
  Windows 7-64 bit
  Dell WIreless 1703 802.11b/g/n(5.2GHz)

  Sorry for this long to make, I appreciated all the help.
  Thanks in advance.

  Hello

  Have you tried to reset your laptop to a time before this issue started with a Windows 7 Restore Point?  If it is a parameter change or software this restore point can help solve what is at the origin of the problem.

  I'd also, of course, when you are resetting the router, to make sure that you let it sit for at least 30 seconds to a minute before plugging power back in.  You may need to do a few times to clear his memory to be able to connect.

  In addition, have updated the drivers for the wireless card?  What version of driver currently installed in the system?  You can consult our support site, enter your serial number and click on drivers & Downloads to find the driver for your wireless card.

  Finally, have you tried to empty the wireless profiles that are currently stored in your system?   If you delete the profile current wireless (which is to control your connection to the router), reboot your system, and try to reconnect Windows will rebuild the profile and hopefully allow you to log in again.

  I would like to know if any of this helps.  To help resolve this more effectively please click on my user name Dell Todd and send me a private message with the Number of Dell Service from your system.  Please keep all troubleshooting and discussions on this thread open so that others can find the information they need to solve their problems.

  Todd

• Intermittent connection problems Atheros AR5BWB225 Wireless Network Adapter.

  Original titile: constantly restteing my Atheros AR5BWB225 wireless network card

  Hello, I just got a new computer, it is an Acer Aspire S3.  I have problems with stay connected to my network and having to reset the network adapter from one or two times a day at intervals of a few minutes.  There are two other laptops (HP and Toshiba) in my environment as more well-connected smartphones and ipad, but my computer is the only one having connectivity problems.  Any idea will help you.

  Hello

  1. have you updated any drivers, including drivers for network card?

  I suggest you perform the steps in the below link:

  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point

  http://support.Microsoft.com/kb/928152

  Also, check out the following links for more information:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Hope this information is useful.

• A Gemplus card driver problem

  Hello

  I need a help. I got a GemClub-memo card to work on. Whenever I connect it to my machine windows via a reader from SCM, it's show could not load the driver for card while the card reader is successfully launched. I am able to communicate the card properly via commands such as ScardTransmit, ScardStatus. My main questions are:

  1. during indexing through the map, map does not show the PIN code window.

  2. in the device driver page, it displays a YELLOW exclamation point in device driver page.

  Can you please help me solve this problem? Please let me know if I'm missing something

  Hi I_m_Ginnie,

  Thanks for posting the query on Microsoft Community.

  I'm sorry to know that you are unable to use the Gemplus card reader. Don't worry, will help you with the question.

  Try to run hardware store and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  If the problem persists, then update (where it is showing the exclamation point), the driver through Windows Update or the manufacturer's website and check if that helps.

  Update drivers in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab5&V3H=winvistatab1&v4h=winxptab1

  For more information:

  Smart card troubleshooting guide

  https://TechNet.Microsoft.com/en-us/library/dd979536 (WS.10) .aspx

  I hope this helps to solve the issue. If the problem persists, get back to us. We will be happy to help you.

• Connection problems with O2/UK

  Hi all

  II having connection problems when running my application on the network O2/UK. It is specific to the said operator then please don't direct me to General articles on connection settings (I have a simple library for dealing with this).

  I first tried WAP2, which I think I read was the best option, and it failed with the following text: "java.io.IOException: APN is not specified." Connection parameters used were: «;» ConnectionUID = WAP2 + trans"(extract from the records of service). This indicates to me that the settings in the service record are not OK...

  Then I tried wap1 with the following settings found on the web (pinstack.com):

  Gateway IP: 192.113.200.195
  Port: 9201
  APN: wap.o2.co.uk
  username: o2wap
  password: password

  with this, I have net.rim.device.cldc.io.waphttp.WAPIOException. The parameters can of course be wrong (that's the point of not having them in the camera, as do all other manufacturers, BTW...). Y at - there someone here who has done other app works with o2 UK without resorting to the BIS? Any help is appreciated.

  Thank you

  Laszlo

  1. If you try WAP 2.0 TCP, then instead of '+' it probably should be a space in the ConnectionUID. It should read "ConnectionUID = WAP2 trans. You probably get a sign '+' because you think you need exhaust URL parameters, which is not the specific case for RIM connection settings.

  2. If you try Direct TCP (aka carrier TCP today), then take a look here: http://www.filesaveas.com/gprs.html I got a card SIM O2 (contract) and the "Mobile Web" APN settings worked very well.

• Internet connection problems Asus G750JX Qualcomm SR9485 prevention

  I've had this laptop for my graduation in the middle of May. Since 9 June my laptop randomly drop internet connection so that it says I still have the connection. I mainly use this computer for internet activities.

  I already tried things.

  • Factory reset
  • Download driver new site Web from Asus
  • Download driver for prevention Web site

  ASUS G750JX 17.3 "i7-4700HQ 2.40 GHz 16 GB 7200 RPM 750 nVIDIA game W8 disc HARD 3 GB 770 M Full HD Blu - Ray laptop

  Hello

  Collate ASUStek support, their drivers and documentation online and ask in their forums
  on known problems. Don't forget to update the WiFi drivers with the latest version available at
  ASUS and then check for a newer version on the sites of Atheros.

  ASUS - Service<-- includes="" live="">
  http://www.service.ASUS.com/

  ASUStek support
  http://support.ASUS.com/

  ASUStek Forums
  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  ASUStek drivers
  Atheros http://support.Asus.com/download/download.aspx?SLanguage=en-US- drivers
  http://www.Atheros.cz/

  Qualcomm-Atheros - drivers
  http://www.QCA.Qualcomm.com/resources/driverdownloads/

  ========================================================

  More troubleshooting:

  Free Wi - Fi and wireless problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note the use of Win Key + X and Win Key + W (to access control panel, run,
  and settings according to needs). Win + D key calls to the office and use
  Win Key activates / deactivates the desktop and start screen.

  --------------------------------------------------------------

  Control Panel - Network and sharing Center - solve problems

  References to Vista also apply to Windows 7 and Windows 8.
  
  Your router be guess here, you have successfully updated the firmware a possible
  solution? And I would update your WiFi drivers on computers. How far away are they
  you have set in the router? Are there obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click
  top - tab of the driver - write version - click on update driver (can't do
  nothing that MS is far behind the certification of drivers). Then right click on the Wifi
  Device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Microsoft - How can Windows 8 - I fix the network adapter problems? (Do not forget to see
  This section-> update the NIC driver).
  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Drivers and Microsoft - Windows 8 - Hardware
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Microsoft - Windows 8 - why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Microsoft - Windows 8 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system Maker you can see the same device manufacturer
  more recent versions. (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other update
  Drivers Windows 8 like updated drivers.

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - set up a new connection or network

  -----------------------------------------------------

  And:

  TechingItEasy - how to join a Wi - Fi network in Windows 8 by MVP Andre Da Costa
  http://techingiteasy.WordPress.com/2012/06/09/how-to-join-a-Wi-Fi-network-in-Windows-8/

  Microsoft - Windows 8 - Web & Networking
  http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8

  Microsoft - Windows 8 - Wi - Fi & Networking
  http://Windows.Microsoft.com/en-us/Windows-8/WiFi-networking#1TC=T1

  -----------------------------------------------------

  Microsoft - Windows 7 - Why is my Internet connection so slow? (applies to Windows 8)
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Microsoft - Windows 8 - wired and wireless in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• [Attention!] Creating cloud causing connection problems serious.

  It is a very serious problem, and I hope that if anyone else is experiencing this, they find this thread.

  So the problem?

  Suddenly, my internet connection started having serious problems, and I thought that my network card sang her last song.
  Stopped loading websites, applications stopped connecting to the cloud etc, although some applications using direct IP to connect worked, so my first thought was a DNS issue.

  I begin troubleshooting my PC for hours without success, which included tracking IP addresses and DNS servers, change of drivers for my network card, try to other routers and whatnot. The list goes on and.

  I even re-installed the whole PC after hours of no results.

  So with a clean PC, things started working again. I then started to reinstall all my software from scratch, and all of a sudden, the problem returns. Again, I begin troubleshooting. After starting the PC in safe mode with network capabilities, I realized that it wasn't my network card.
  After hours of restarting and deactivation/activation process in the background, the cultprit was obvious.

  Creative cloud caused network issues for each unique application, I used. But it only happened when the CC began the initial load of windows. I can start it then no problem.

  So basically:

  New installation of PC

  Install CC
  Is connection problems.

  Solution: Disable the autostart for "Adobe Creative Cloud"

  Autostart can be disabled in the application itself, or through research 'msconfig' on windows, auto-start tab.

  Someone has to take a look at this. I was very close to the purchase of new equipment for my computer, or replace all MOBO, CPU, RAM etc. It took my almost two days to understand this. It wasn't an obvious problem.

  I found something to add for PC users using Windows 10 (not sure how to apply it to Mac):

  • Run msconfig - takes you to the configuration of the system (as previously indicated by Florrpan)
  • Check "Selective startup" is selected on the general tab.
  • Check load system services and load startup items.
  • Go to the Services tab.
  • Disable all Adobe services and click on apply.
  • Go to start and open the Task Manager.
  • Ensure Adobe Creative Cloud is disabled - this can be done by using the right mouse button or the button disable at the bottom of the window.
  • Make sure that Adobe Updater utility to start is disabled.
  • Make sure Acrotray is off.
  • Restart your PC.

  Happy creating! If someone is all this and is facing questions please let me know

• connection problem with screen

  I bought a compaq presario cq61-421sa about 18 months ago, so it is now out of warranty, and I have a connection problem with my screen. the entire right is taken up by different colored about vertical lines 1 pixel everywhere and therefore can not see half the screen.

  any idea how much it would cost to get HP support to do a repair on it? as I don't have the confidence to do it myself

  Hello

  Thre are 2 things that are likely

  the video card

  (b) the screen itself

  To check this, simply connect the laptop to an external monitor (from a friend, parent,...) If nothing wrong with the external monitor, which means that the screen of the laptop is faulty, if the video card is faulty. I don't know the cost but I charge $640 plus a party; Sometiomes my recommendation is to buy a new machine.

  Kind regards.