sd card problem help

Similar Questions

• 2008 mac Pro Apple Raid card problems, help!

  Hello, I have a mac pro 2008 with a raid set up. I want to get rid of all old raid together upwards and instead put a new ssd in the first Bay. The computer cannot read it because I think that it is always configured as a raid. Does anyone know how to make the available drive bays to new readers? You're help would be highly appreciated. I want to take the Apple Raid card so I can have an additional PCI port and I also want to get out the discs four raid. Just so I can put in a single ssd! Thank you very much.

  When you remove the Apple RAID card, readers who were searched will be unreadable. You need to make backups before time, because there is no way known to them read differently.

  There is a data cable, called the iPass cable connected to the motherboard to the RAID card. You must remove this cable when you remove the RAID card and reconnect the plug corresponding on the motherboard. Once you do this, you get four bays returned as SATA bays and can install any drives that you like. The problem with a lot of SSDS is that they are 2.5-inch form factor drives and may not fit on a standard sled. Users have used an IcyDock (in the 2008 version and earlier versions) or the newer technology adaptadrive:

  http://eShop.MacSales.com/item/NewerTech/ADPTADRV/

  ... to get the alignment and attached straightened.

• Graphic card problem - help! :(

  I was on my pc that the other day and he just cut himself as if power cord has been disconnected. I tried to restart but before he got to home screen... it is cut again. After several tries, I got to the root of my problem, which was my nvidia geforce graphics card 6150 THE. When I turn it off, the pc works normally outside I can't use my graphics card for games, etc... When I allow it, the problem re occurs. I don't know what to do to fix it, please help! :(

  Hello

  go to nvidia and get the graphics card for your card latest drivers

  Look for them in the link below

  http://www.nvidia.com/download/index.aspx?lang=en-us

  If fixed it, you can have a default graphics card

  change the graphics card and see if that fixes it

• Qosmio G40-10 s: graphics card problem

  Hello.

  I have a Toshiba Qosmio G40 laptop 10s with a Nvidea 8600 M GT grafixs card. I was playing a game when it locked up and pasted what I would describe as flashing red/green 'Matrixy' search screen.

  He then a blue screen and trys to reeboot.
  He tries to start windows, but once again the top matrix. If it loads to the top, it is in 16 bit color with red dots all over the screen.

  I am sure that the GPU is fried... and I was wondering what I can do? It's been 5 months out of warranty now.

  I read on some forums that there have been a lot of problems with this Nvidea card... Is there anything I can do outside my warranty period with what there is a possibly faulty card in it from the beginning.

  It will cost a lot of money to get it repaired, but its too good a laptop to let go to waste.

  Any help is very appreciated.

  J

  Hello

  You also have these lines on an external monitor?
  If so, there seems to be a graphics card problem and it must be replaced.

  These overheating problems also occur if you use the nVidia display drivers directly. Toshiba drivers are pre-tested and don't overheat your system.

  But I think you need professional help. You should contact an authorized service provider and talk to the technicians. They will help you! :)

• TouchSmart HP Envy 15-j078ca - sound card problems

  Hello!

  I have a HP Envy 15-j078ca running windows 8.1 touchsmart and, recently, I noticed that my audio is static/crackling noises. A test, I plugged my head phones to see if it was a speaker problem or a problem of sound card and audio in my headphones was also static noises.
  
  Some of my audio programs tell me that it is a sound card problem.

  What I did: I followed the advice on another thread that had me uninstall the drivers and hand it to reset my bios settings can have my drivers to reinstall but I found that my audio worked perfectly! ... for about 2 hours then my cell phone was dead silent so I got this back a few days and the audio was fine again... for a few hours before he began to do staic noises again.

  I'm not really sure what the question is here, or how I can correctly solve this so any help would be appreciated!

  Thank you.

  Thank you for visiting the Forums HP's Support and Welcome.Thank you for the very detailed information very useful. I looked in your question about your computer laptop TouchSmart from HP ENVY 15-j078ca and popping sound or cracking.

  Here is a documenton the sounds troubleshooting.

  Please ensure that your edits were made on the laptop. In under his right click Device Manager and update driver. This is another step to try.

  1. right click the speaker icon in the lower right corner of your time.
  2. click on playback devices.
  3. click on speakers/headphones.
  4. click on properties.
  5. click on the Advanced tab in the Properties window.
  6. change the default menu Format in the highest quality.
  7. apply properties.
  8. click OK to close the Properties window.
  9. click OK to close the playback devices.

  Hope this helps you.

  Thank you.

• HP Pavilion 15 p000su video card problem

  Hello
  Yesterday, I bought a HP Pavilion 15 p000su
  http://WWW8.HP.com/BG/BG/products/laptops/product-detail.html?OID=7264987#! tab = specifications

  It says in the description that I have an Ati Radion R7 260 video card
  but when I run DirectX (dxdiag) it says: I'm with AMD ATOMBIOS 256 MB

  I installed the drivers for Ati Radion R7 260 (I think I did) nothing has changed
  To be sure that what dxdiag says is true, I even installed Dota2 a game requiring good video card

  Help, please

  I do something wrong or I'm giving different product?
  If there are problems with the main card (Ati Radion R7 260) how I can start the APU (Ati Radion R5) card?

  Problem sovled
  We have installed the Win8.1 and all the drivers of HP support model and the site of AMD and the video started working

• Start Windows Vista or graphics card problem problem

  OK have a problem with Windows Vista here. Its pc of my grandmothers, only a year or two. (office) My brother went in safe mode and came back with a restore point. He said it worked, but now, the screen goes black trying to open windows.

  What's happening...
  It starts showing the status of the drives and ram memory and asks me if I want to install through F10 (which works) then it goes to the "Windows was extinguished not correctly." And it gives the offer of
  Safe mode
  Safe mode with networking
  Safe mode with command prompt
  Normal windows startup
  The security mode through the long load upward and then a black screen and an arrow of big white mouse I can move.
  Normal windows opens with the quick bar Windows... then nothing. Just a black screen and a white mouse arrow. Of Cntrl Alt Del does nothing and only thing that makes something happen hit SHIFT 5 times. It causes a beep and a window opens asking if I want to use StickyKeys. Other then that I had nothing.
  I'll try to find a Windows Vista dvd to repair.
  Part of me wonders if it is a screwing display driver. As I said some stuff shows up to save for windows, so it's a small chance, but to think what anyone.
  Care,
  Windows Vista Edition home premium
  HP Pavilion p6110t

  Hello

  If you start Windows, see a desk white or black with no icons, video card problems are the most common cause of this problem.

  Try the following troubleshooting steps:

  Method 1: Access your computer and reinstall your current video driver

  Uninstall your video driver and allow Windows to re - install:

  1. click on start and type device manager in the search box

  2. click on device under Programs Manager

  3. Select the video driver and uninstall

  4 restart your computer to allow Windows to reinstall the driver

  Note: Once the driver is reinstalled, you may need to restart your computer to complete the installation. In addition, you will also need to adjust the resolution of the display to its previous value.

  Method 2: Turn on the video resolution (640 x 480) and then update your video card driver

  If the resolution of the registry problems does not work, perform the following steps to activate the video resolution:

  1. Click the Start button, click the arrow next to Shut Down and then click on restart.
  2. Press F8 before the Windows logo appears.
  3. In the Advanced Boot Options screen, use the arrow keys to select activate video low resolution (640 × 480) and press ENTER.
  4. Log your computer with a user account with administrator rights.

  If you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information,.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: Start your computer in Mode safe mode and disable your video card

  If activation low resolution and then update your video card driver do not work, perform the following troubleshooting steps to disable your video card driver:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Note: Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed

  When your computer restarts, if you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 5: If these steps do not resolve your problem, try to boot mode safe again and follow the steps in the system restore to restore your computer to an earlier point in time.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Note: System Restore affects file system of Windows, programs and registry settings. It can also make changes to scripts, files, batch and other types of executable files created under any user account on your computer. System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file. If you have backups of your files, you can restore files from a backup.

  If this still does not have the problem, contact your computer manufacturer or the technical support for further assistance.

  It will be useful.

• Graphics (Radeon (TM) HD 7690 M TX card problem

  Dears.

  Most of the time when I start the game it crashes. I have 2.5 GB of graphics (Radeon (TM) HD 7690 M TX) and 6 GB of Ram. I installed new games such as Battlefield 4 and Call of Duty Ghosts and I can play them, but most of the time it crashes once I play sometimes and then it stops working. My system has all the requirements for these games, but it still crashes.

  Please let me know what is the problem and how can I fix?

  I'm the product: HP Pavilion dv6 notebook PC & product number is: A7P20EA #ABV

  Also please help me to find the updated driver for my graphics (Radeon (TM) HD 7690 M TX card because when I enter the product name or product number, he says:

  We were unable to locate the drivers & software downloads page for "HP PAVILION dv6 / A7P20EA #ABV'"

  where it says:

  We were unable to locate the page of download drivers & software for "HP PAVILION dv6"

  where it says:

  We were unable to locate the page of download drivers & software for "A7P20EA #ABV".

  Please help me.

  Thank you

  Download driver for Radeon HD 7690 M you can find on; http://support.AMD.com/en-us/download

  To avoid the crash - 1. in balanced high performance switch options. If you avoid graphic switchabile.

  2. cooler to avoid overheating of the GPU.

  Good luck!!!

  By clicking on the White Star congratulations on the left is a way of saying thanks! ******
  * By clicking on accept as Solution on an answer that solves your problem helps others who are looking *.

• How to find the serial number of 8300 Gs graphics card please help

  I try contact evga tech support but I need the number of graphic series of 8300 Gs registration card of finished products for support technique evga. My pc is a Dell inspiron 530 pc exalted pix to A crash, I'm sure that the screen's video card problem.  I do not turn off the pc and open the computer case and find the 8300 GS graphics still then the Pc card serial number works well. I have Service Tag any good help please

  Do you mean you bought an EVGA 8300 GS on your own or being the 8300 GS installed by Dell?  The serial number will be on the retail box or on a sticker on the map.  You need to open your side panel and look on top of the card to get the serial number if necessary.  If installed by Dell, most likely you don't have any collateral at this stage on the 530.

• Screen flashes different colors and freezes at the same time, there is a video card problem?

  When it gets really bad most of the screen will Blanch and freeze. This global problem cut in and out, but is common.
  Any help would be greatly appreciated.

  EDIT: I forgot to mention that it is a HP G62 laptop.

  Hello

  Yes, it could be a video card problem. Let me suggest that you run this Fix It routine: http://windows.microsoft.com/en-us/windows-vista/troubleshoot-monitor-and-video-card-problems#.

  Let me know if this helps you.

  Kind regards

  BearPup

• Satellite A300-2 TB-Ethernet network card problem

  Hi all

  I have a laptop Satellite A300-2 CT with Windows XP SP3 for a year. There is a problem in the network ethernet card, I think.

  If I connect my computer to a wireless network, all right. However, if I connect the computer to a wired network via the ethernet card, problems begin.

  A little later after the connection. 'something' is happening and my windows theme changes to "classic", plus none of the applications that uses the beginning of the soundcard NOT working. In addition, the system slows down a lot for all the one or two minutes. When I check running applications during the"slow", I see that deferred procedure calls takes a lot of time processor.

  Problem does not end with this, after that I disconnect the ethernet connection and restart my computer, the application of the wireless (Atheros) adapter takes control of wireless connections, so I can not connect wireless networks I wanted. I have to restart the computer to resolve this problem.

  I've updated the network ethernet card driver, nothing changes.

  In conclusion, I think the network ethernet card has a problem and maybe it is in conflict with other hardware (such as the sound card).

  Y at - it suggestions to solve this problem?

  Thank you.

  Hi alp37,

  I have never heard of this issue, and I think all you can do is update the LAN and the audio driver. The two you can download from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  If it doesn t work I think I think it is a software problem I would recommend reinstalling Windows Toshiba recovery disc. Who can restore the factory settings, and then you can test it again.

• Defective video on Mac Pro Intel card?, help!

  Hi all, my Mac Pro Intel crashed at recentpy. At the start, it appears that the SSD drive had failed completely. Since I replaced the drive however at startup, I now feared vertical lines. What is a graphics card problem? I have tested the monitor and it works fine on other machines. The machine hangs at startup and I tried a number of different ways starting in diagnostics etc. The video in the machine card is a Geforce.

  Sounds very like the graphics card has disappeared.

  which he was.

  my mac Pro 3.1 Nvidea GeForce 8800 GT went bang a few months ago

  in a rather more psychedelic way. still, it lasted 7 years when it was supposed to give up almost immediately.

  replaced by a Nvidea GeForce GT 120, which is fine.

  a lot of options out there if you don't mind is not to have the screen of "boot".

• BlackBerry Z3, I lost all my data on my SD storage card, please help me to retrieve the data.

  Dear Sir.

  I lost all my data on my SD storage card, please help me to retrieve the data. I have a Z3, just bought only a week before, I removed the card with the phone off and then give the card again and noticed that I lost all the data. Please help

  Try restarting your phone. Sometimes it shows data that brought them "disappeared". To do this, hold down your power button for about 15 seconds, until you see BlackBerry on your screen. Do not release the button until you see that without taking account of any other thing you see before that.

  Try this and post back with your results.

• Card problem multimedia blackBerry Z3

  I use my media card in BlackBerry z3 and he said that it could solve media card problems summary abd will be quickly deleted what I can do

  I have format my card many times but the problem occurs again and again that I have to change my card while this problem reoccur

• Hello how do I recharge recharge my acount. I've been in other countries and can't put money on the card (((plz help!

  I need help! How to recharge recharge my account. I've been in other countries and can't put money on the card (((plz help!

  Hi Dimitri.

  Please contact support by calling/chat in order to get the billing issues corrected.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena