Search for devices wireless in Configfree

Similar Questions

• HP bt500 - your Bluetooth device could not start the search for devices

  Hi, I want to use my HP bt500 to connect my PC to my helmet, but I get the following error message:

  "Your Bluetooth device cannot DΘmarrer him search for devices"

  I downloaded and installed the Windows XP of HP bt500 software version of:
  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=228&LC=en&DLC=en&cc=us&product=3350927

  I tried on two different computers, but they both get the same error.  I took out the bt500 my HP photo printer.  I wonder now if this bt500 is simply limited to only work with printers and not the PC as the other versions of detail.

  Help, please.  Thank you.

  Problem solved.  I had to download the broadcom bluetooth software was last updated.

  www. Broadcom.com/support/bluetoothupdate.php

• Search for display wireless devices

  Some how I managed to get up the circular screen with a rotating wire that displays all available devices. Now his party and I cannot get to the top. I have a left click on the taskbar icon and a "search for wireless devices' but only get the small screen. someone help please?

  Hi Paul

  If I understand you right that you talked about ConfigFree Launcher. If I'm right, you can start it by clicking with left mouse taste ConfigFree icon on the taskbar. Choose search for wireless devices, and the pitcher will start. On the right side of the screen you can see four icons. On top it is called icon option. Check all the settings and you can also set an option that starts the Launcher to start Windows.

  Good luck!

• Search for device drivers in LabView

  I try to install the device, via the Help menu of LabView drivers. I select the manufacturer and a key word, but I can't click ' search for > '. The button is grayed. What should I do to be able to click on this button?

  As far as I know all the drivers, you can download through this screen, you can also get NI.com directly:

  Driver search page

  It is a little less convenient that you must put yourself in the instr.lib folder and restart LabVIEW for them appears in the palettes, but it's better than no drivers at all.

• Vista backup cannot find the backup device, is to say "searching for devices to backup...". "

  For Windows Vista-32 SP2:

  I recently had the hard drive replaced on my laptop.  Now I'm doing a backup, but when I start Windows Backup, it gets stuck constantly "looking for backup... devices. "I have a WD My Book external hard drive formatted NFTS connected via a USB port that works beautifully with the backup before replace hard drive.  The drive will appear in my computer, so I don't know that it is very well hung.

  Any ideas why Backup cannot recognize him now?

  Hi IdahoMt,

  1. are you able to select the other readers?

  I would ask you to set the computer to clean the start state, and then try to run the backup and verify.

  You can read the following article to put the computer in a clean boot:

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  Hope this information is useful.

• Satellite M35: Configfree search for wireless devices

  I have a satellite M35. Icon to search for devices wireless in configfree stopped in my office.

  Hi Enrique.

  you could look it up if the Configfree software is already installed on your device. You can then create a new shortcut on the desktop by right-clicking the program "cfmain.exe. It should now work!
  or
  you uninstall the software and reinstall from the CD of utilities and tools of Toshiba. If you do not have the CD, you can download the last Version of Toshiba Amerika
  at http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp
  (I think the Satellite M35 is an American product) and then do a reinstallation of the software.

  I hope this will help you.

  CU Sammy23

• BlackBerry Smartphones BBM video, BlackBerry Natural Sound, Paratek antenna, universal search for the PRIV?

  Someone to confirm if the priv get bbm video in the future. Since BB10 is phased out in 3-4 years maximum.

  There Paratek antenna, its natural, universal search?

  Hi @valer466

  • Paratek = Yes
  • Natural Sound = Yes
  • Universal Search = Yes (search for device<-- it's="">
  • Video of BBM = No., but your comments were shared with the BBM team

  BlackBerry has said nothing on gradually BB10 either so lets avoid speculating

  I hope this helps

• Y at - it a command to force a MacBook Pro to search for connected devices?

  My MacBook Pro (retina, mid-2012 running 10.11.6) struggled to connect to my Drobo Mini - from the first day of the purchase of the Drobo Mini in February. Sometimes it connects, sometimes not. I worked with the support of Drobo, who went so far as to send me a replacement, but still no luck. I learned that I can usually get a successful connection carefully timing my login at a specific time in the 'dancing lights' Drobo starting routine. A little late or a bit early at the moment and there is no editing of the car. In this case, I have no choice but to stop the computer and the Drobo and try again - sometimes repeat this procedure 2 or 3. Frustrating and not good for the material, I'm sure.

  Here's my question (for all the times I miss the right timing), is there a command I can give the MacBook to 'force' to 'search' connected devices? If so, I hope that they can connect. It's frustrating when the devices are connected physically but doesn't seems to "reach out" to the other.

  At startup, the reader sends a signal to the adage of "I'm here, let's connect." computer Or, the computer continually detects when a device connects. Whatever it is, a device or another is dropping the ball.

  Thank you for your help and advice.

  Bill

  Disk Utility.app > file select your drive > Mount

• Device driver for LINSYS Wireless-B USB Network Adapter 2.4 cannot install or find the drivers for it?

  I can't find the drivers for a wireless - b network card to install?

  Hello

  1. What operating system is installed on the computer?
  2. You try to create a new connection?
  3. The computer is connected to the domain envirnoment?
  4. Do you have similar problems with drivers with other USB devices?

  Please provide more information on the issue so that we can better help you.

• I have a problem with finding a PnP USB audio device when you search for available audio devices.

  Hello.

  I am building an application that can find a PnP USB audio device and play a tone if the device is connected. I am able to search audio devices using "Sound Device Info.vi" of the lvsound2.llb that comes with labview.

  The vi can find the USB device in good conditions, but there are problems - I'll try to describe 2 scenarios.

  1. the USB device is connected before 'Sound Device Info.vi' is called for the first time.

  In this case, the program can find the USB device. If I unplug it, the device disappears from the list of found audio devices. If I reconnect to the same USB port, it reappears in the list. It's all good.

  If I reconnect it however a new USB port, the device is not found. This is not good.

  2. the USB devices is not connected when 'Sound Device Info.vi' is called for the first time.

  "Sound Device Info.vi" is not able to find the device. Disconnect and reconnect does not make a difference.

  I'm under labview 2012 on windows 7.

  I am running the application as an exe to build.

  I call 'Sound Device Info.vi' as a 'call for reference"and the reference is closed between calls to the vi. I was hoping this would unload the dll used in "Sound Device Info.vi" and would solve the problem, but it didn't.

  Is there a way to reset the information usb labview during execution?

  Concerning

  Stephan.

  Hey Stephan.

  The sounds screws require a DLL located in:

  C:\Program Files (x 86) \National Instruments\LabVIEW 2012\resource\lvsound2.dll

  Internally, LabVIEW uses the DirectX API to enumerate devices. The one caveat is that probe us for devices when loading the DLL. We probe not later. So that it works for Bluetooth, USB, fire wire, etc. devices that can be inserted or removed at any time, you control somehow when this DLL charge and discharge. To do this, please see the following document:

  Dynamically that I can load and unload a DLL in LabVIEW?

  http://digital.NI.com/public.nsf/allkb/77594203D78D12278625729100758BE5

  I would also recommend that you provide a Kudo to this idea:

  Updated library lvsound2 (Sound Input/output Sound live) to support audio devices change on the fly

  http://forums.NI.com/T5/LabVIEW-idea-Exchange/update-the-lvsound2-library-sound-input-sound-output-V...

• This device cannot start. (Code 10) Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  Map #2 Microsoft Tun Miniport
  This device cannot start. (Code 10)  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.
  ???

  Hi AnaSk,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows.

  Download and install the latest drivers from the computer's network adapter or the website of the manufacturer of the device.

  See the article below

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

• HP photosmart 309 a continues to search for wireless routers

  HP Photosmart 309 has

  Windows 7

  No error message

  I follow the instructions to install printer

  1) go to your printer

  (2) select the arrow to see the next menu. (it should be on the right side of the LCD screen, it looks like a triangle on the side)

  (3) select Setup--> network--> network wireless assistant

  (4) the printer will start to search for wireless networks and continues and continues even with router in the same room?

  Hi Nigel,

  You will need to call our technical support at 800-474-6836 for this radio show. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

• I can't detect any windows bluetooth device and other devices to activate bluetooth can also search for my laptop.

  Original title:

  I dualboot laptop dell inspiron 1440 I reinstall Home Basic to Windows 7 it spend to service pack 1. I can't detect any device Bluetooth window and other devices to activate bluetooth can also search for my laptop. I have problem bluetooth but my other os ubuntu 12.04 I can find any other compatible bluetooth and another bluetooth device turn on the device can get my cell phone. my windows 7 is up to date. I have installed and reinstalled my bluetooth driver official dell site I'm tired now please help me how to solve my problem when I uninstalled the driver window bluetooth and restart it automatically installed through the window, but still I can not able to associate all devices when I checked the driver for the update , it says driver is up to date, I activate the window to find this computer to other devices through the bluetooth setting.
  Please help me

  Hello

  You did changes to the computer, before the show?

  I suggest you to download and install the fix from the following link.

  Bluetooth devices do not work correctly on a computer that is running Windows 7

• How to search for text in all of the PDF files on a mobile device?

  How to search for text in all of the PDF files on a mobile device?

  Not possible on mobile devices.

• E/s network device Usermode and ConfigFree protocol error

  I have a Toshiba laptop and recently it has not started properly, displaying the following message: "Not found TOSHIBA Network Device Usermode i/o Protocol. Please reinstall ConfigFree. OK ".

  I'm unable to use the laptop and it will not close without having (although once it has stopped and rebooted OK and then worked fine for three days we have left it for Christmas and now it does once again). Can someone let me know what does this error message mean and how do I deal with it (I know little about the functioning of my laptop!).

  We have Windows XP and are configured for a wireless broadband connection. I'd be wonderfully happy if I could work out what I was forced to move to work rather than working at home today because of this!

  Thank you in advance!

  Hello

  The message is clear.

  > Please reinstall ConfigFree.

  Then why didn t you reinstall this utility?
  If you didn t create the utility CD & Tools you can download this utility from the Toshiba driver page.
  Then remove the ConfigFree to add & remove programs, reboot the device and reinstall the ConfigFree.