Certification on Tandberg Ex90 input HDMI HDMI standard.

Similar Questions

• My laptop Toshiba there input HDMI?

  My laptop Toshiba there input HDMI?
  I was wondering because I want to play my xbox one on it.

  If your laptop has only one HDMI port, then this is an HDMI output port.
  Only certain models Toshiba Qosmio bit supported two ports (IN/OUT) HDMI in the past

• Black screen using a drive Blueray or DVB - T receiver as input HDMI device

  We have a problem with our Cisco Telepresence profile 65 double (C90, MultiSite, NaturalPresenter, Premium, Firmware TC5.1.4.295090 resolution):

  Using a camera document connected via HDMI (as a source of entry "DVD"): works well.

  Using a receiver DVB - T connected through the same HDMI input (like "DVD" input source): black screen

  Using a Blueray Sony player connected via the same input HDMI (like "DVD" input source): Watch the Sony boot animation when you turn on the Blueray player, then: black screen

  Seems to be a problem with the Codec. When it is connected directly to the HDMI the screen, the Blueray player works well.

  Any suggestions to fix this?

  Manual

  Hello.

  HDCP is a capability in handling handling the HDMI chip.

  I don't beleve not support the codec that have. It's beeing encryption sent by the blu - ray, and codecs does not contain the decryption feature.

  Marius

• Input HDMI, good video, no audio - M17x R3

  Hello

  I've had my computer for a year now and I'm now trying to use it with my PS3 through the HDMI input.

  I was able to get the video, but none of my attempts to get the audio working, worked.

  I tried to do the registration method, update driver IDT, nVidia Driver, everything that I could find.

  In the nVidia control panel, 3 options are shaded out and not usable.

  I changed the audio from the PS3 to see if this would have an effect, it only has done it.

  Help, please!

  Try this... right click on the volume icon in the taskbar...... open to recording devices select input hdmi... them go to properties, then on the listen tab... nd select "listen to this device"... hope that helps :)... it worked for me

• Second display Tandberg EX90

  Hello, I had a question about the Tandberg EX90, I am trying to connect to a projector in the HDMI Out of the Tandberg, but it's not give signal to the projector, right now, that is - this installer is that the HDMI output:

  xConfiguration video output HDMI 1 resolution: 1920_1080_60

  xConfiguration video output HDMI 1 OverscanLevel: Medium

  xConfiguration video output HDMI 1 EAC Mode: Off

  xConfiguration video output HDMI 1 MonitorRole: second

  It's not giving a signal in the projector via the HDMI Out, I checked the Option keys and it isn't a dual display Option key:

  * s SystemUnit software OptionKeys DualDisplay: "false."

  I need a key option for a second screen to work? It's making to work as a single monitor, which means having the same video on two screens, one of the EX90 and projector.

  Kind regards.

  Yes, you will need option double screen (reference number: LIC-EX90-DD).

• Activation input HDMI on Toshiba 40TL868

  How to set the activation of HDMI input on 40TL868? Instead of always having to manually switch on the remote control and menu-source HDMI input.
  Who can help me with this?

  
  Message was edited: assignment has been translated

  My Toshiba TV always starts with HDMI1 port, so my first external device is connected to the HDMI1 port.
  When I want to watch the BD or DVD that is connected to the HDMI2 port I have to change it manually.

  There is the same situation on your TV?

• Input HDMI to Sony Brevia KDL - V40XBR1 TV menu

  I have a Roku streaming stick plugged into the HDMI port on the back of my Sony Brevia KDL-V40XBR1 TV.

  However, I can't find the input channel appropriate when I scroll the entry options.  How do the correct entry?

  Hi richardjroberts!

  You must press the TV/VIDEO button on your remote control Sony provided several times and then select input VIDEO 6 that corresponds to the entry for the HDMI connection on your Sony KDLV40XBR1 TV.

  If the VIDEO input 6 is ignored, you must press the WEGA GATE, go to SETTINGS, and then select the LABEL VIDEO INPUTS. Under VIDEO LABEL ENTRIES, select VIDEO 6 and turn it on.

  If my post answered your question, please mark it as "accept as a Solution.

• Pavilion dv7-6b56nr: input HDMI not working not

  My laptop old 4 year was quite slow and unresponsive at times so I am here yesterday & downloaded some updates driver including audio and video. It runs a lot faster now, but today I have connected my laptop to my TV that I made hundreds of times through hdmi connection and it does not work. That's happened?

  * I also can't adjust the brightness more. He's stuck on super bright.

  Hi @miltaryman,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv7-6b56nr Entertainment Notebook and the HDMI doesn't work does not correctly. Here is a link that can help troubleshoot the HDMI connection.

  You can try to use theWindows Update Troubleshooter to fix updates that do not come through Windows.  Please restart the laptop twice to make sure that all updates are completed!
  
  Please let me know how it goes.
  
  Thank you.

• Input HDMI Sony Bravia KDL-40BX420 of connected PC has stopped working

  I used my laptop to my Sony Bravia TV using the HDMI ports for more than two years without problem. I unplug it and plug it back on a regular basis without problem. I have returned from a weekend out of town and plugged my laptop back to and kept getting the error on the TV:

  No signal. Check the external source or select another entry with the ENTER key.

  TV:

  Sony Bravia KDL-40BX420

  Laptop:

  HP Pavilion G6 with graphics Intel HD Graphics 3000 with the latest drivers (Intel HD Graphics driver for Windows 7/8/8.1 64 - bit, v15.28.20.64.3347), 8.1 for Windows 64-bit

  What I tried:

  • Tried it with 3 different HDMI cables (without success)
  • Tried connecting Player DVD TV HDMI ports (successful, plug-and-play)
  • Tried to connect the PC to another TV with cable HDMI listed above (successful, plug-and-play)
  • Tried to reset the TV to factory settings (reset successful, still no PC signal)
  • I tried power reset on the TV (unplugged for a few minutes, connected again, no still no PC signal)
  • Tried to reinstall graphics drivers of PC (Intel HD Graphics Driver for Windows 7/8/8.1 64 - bit, v15.28.20.64.3347, Intel, installation successful, website still no PC signal)
  • Tried to install the latest graphics drivers from the manufacturer's Web site (Intel high definition (HD), pilot chart, v9.17.10.2843, from the HP website, successful installation, still no PC signal)
  • Tried different resolutions video on the PC, exit in double...
  • Tried different boot sequence, with mixed results:
  • Turn on PC the sound on the TV: no signal.
  • Turn on TV that the sound on PC: I see the logo of the 8 on Windows with white turning points on the TV (double on the PC screen and before arriving at the Windows login screen TV turquoise rounds with the error 'no signal'.) So the HDMI works, but only for a short period of time during the boot sequence for Windows.
  • I tried restoring the system to a restore point not go a week ago (HDMI to TV works well all week), no chance. Still no TV signal, and the PC keyboard has stopped working too. That challenge.

  I'm out of options. Help would be very appreciated. Please just keep in mind that he has worked for more than two years without any special configuration. Just plug and play, as it is supposed to.

  Thanks in advance

  have you tried to connect via HDMI port on your TV?

• Help! Input HDMI no sound

  Im trying to connect my Xbox 360 to my r4 m17x. the image works fine, the problem is that I can't get the audio to work. I tried to set the hdmi in default in the sound mixer, but this option does not yet appear. Please help I'm stumped.

  Here's what you need to follow in order to solve this problem.

• limit bandwidth telepresence Tandberg ex90

  Hello

  I have 5 ex90s.

  Location1 (L1): 2

  Location2 (L2): 1

  Location3 (L3): 1

  Location4 (L4): 1

  When ex90 in place call each other, then they can use all the bandwidth as they wish.

  When a place ex90 calls ex90 in another place, they can use only 1.5 M b & w.

  How to implement?

  Help, please!

  Hello!

  I wouldn't be that concerned by the individual links and tips. They will be automatically created for you when you make the subzones. You can get what you want in your simple deployment with just the configuration of the subzone. The unlimited bandwidth in a subarea and limit calls out of it to all the other subfields or areas.

  1: create 4 sub-zones on your VCS.

  VCS configuration > Local area > subzones.

  2: for each sub-area, create a membership rule.

  I guess that the TYPE can be subnet. So as a membership rule, add the subnet for the site corresponding to this subarea.

  VCS configuration > Local area > subzone of the membership rules.

  Subnet address and prefix length

  These two fields determine the range set

  of IP addresses that belong to this subarea.

  (Applies only if the Type is subnet.)

  Address field shows the range of

  Addresses IP to assign to this subarea

  based on the combination of the subnet

  address and prefix length.

  If you have a network at the site THAT has a network 10.1.1.0 as a C-net IP address, membership rule should be:

  Subnet address: 10.1.1.0

  Prefix length 24

  If you have a network to the TWO site that has an address of IP 10.1.2.0 as a C-net network, membership rule should be:

  Subnet address: 10.1.2.0

  Prefix length 24

  and so on...

  3: set up the limits of subzones for your four subzones

  

  As you can see, there is no need to set up the individual links and pipes, unless you want to do more advanced boundaries between your locations.

  Robert

• Incompatibility of speed/duplex on Tandberg EX90

  Hello

  Hope you are doing well, I'm here today because I have a problem with our Tandberg based @ Zurich Switzerland.

  When we connect to the web interface, we have a troubleshooting message: "speed/duplex of Missmatch.

  I did the network speed auto, but it changes anything.

  Could you please help me?

  Often the duplex mode is auto-négocié between the two pieces of equipment; However, auto-negotiation works only if both devices are set to 'Auto '. If a device is set to 'Auto' and the other has other settings, the device of auto adapts as 100/half. The most common cause of problems of incompatibility is the scenario where a device is set to 100/full and the other is set to Auto.

  • Check the configuration of the network switch where your TANDBERG end point is connected.
  • Change the settings of the device so that the devices at each end of a cable have to be the same speed/duplex (1000/Full, 100/Full, 100/half, 10/Full, 10/half) parameters or are both set to Auto.

  Kind regards

  Acevirgil

• Toshiba 32TL838: flicker after fw upgraded in the menus, using HDMI input

  Hello

  yesterday I updated firmware of my 32TL838 to version 6.4.0Y.1 / 94.6.27.8 using the upgrade feature network.

  After the upgrade, I reset the TV to start again with the factory settings.

  During the quick installation after the reset, I noticed a very bad video quality. The entire image flickered, had a ghost effect and looked at interlaced. The menus were almost illegible.

  Once the installation is complete, the TV switched TV (cable DTV) normal mode and at least the TV picture looked quite normal. While the input CABLE is selected, I can also open menus as before, they are displayed correctly.

  But as soon as I switch to the HDMI input, the image becomes nuts once again, just like during the initial installation, including recoveries of TV menu. Sometimes it becomes stable for maybe 30 seconds, but then he is paralyzed again.

  A few words about my setup: TV uses only input HDMI 1 and the cable entry, nothing else is connected.
  Links to HDMI input to a receiver Onkyo TX - SR508 AV which is powered by a Fantec 3DS4600 media player and the Blu - Ray BDP - S373 player.

  Because I expect the question of what-to-your-HDMI-wiring, I traded the HDMI cables but as expected which has not helped at all.

  At least, I seem to be successful by bypassing the problem when you use the Fantec drive.

  Before I updated the firmware, I was able to use the drive with 1080 p/60 Hz and the player has been installed as a result.

  Now I switched to 1080 p / 50 Hz, and the video image seems OK again. (However, I made a short test and as I said, sometimes_
  the image is OK for a short period).

  Unfortunately my BluRay player has no menu to change the frequency, so I watch BluRay or online services, the player offers, is impossible.

  So, what can I do now? A downgrade of firmware (if possible) would be a quick temporary workaround I could accept. But medium-term I'm expecting Toshiba to restore functionality that they promoted and for which I paid.
  (Youtube stopped working with the old firmware and it seems that 1080 p/60 Hz no longer works with the latest firmware).

  Anyone know how to downgrade the firmware using a USB? I already downloaded the previuos version tl838_853886.bin but I do not have a nail how (and if) it can be installed.

  Thanks for your advice
  BELEKTRO

  Hello

  As far as I know the isn t possible downgrade firmware.

  But you said that you noticed this problem by using an external device connected to the HDMI 1 port.
  As far as I know the Toshiba 32TL838 supports 4 HDMI ports.
  I recommend you to check all of the 4 HDMI ports as well as to check all device configuration options.

  Check for example the rate of active movement + option available.
  This option allows to improve the rate of cooling of a TV

• Alienware 17 of xbox via HDMI input

  My input (HDMI-IN) does not work.  Im trying to play my Xbox360 on my Alienware 17 displays and he says he can.  I went on YouTube and I saw other people play screens I don't know how to use my screen. I mean I don't know how to turn on step by step. Help, please!
  1. turn the cap of the xbox everything in
  2. plug the 17 ALienware (HDMI IN) of entry and I pressed the key on the keyboard to
  3. nothing happens and when I press the button says "please connect device (HDMI-IN).

  

  I know you can do that too, it's one of the reasons why I bought my m17x r3 (old version of the Alienware 17). I have my xbox 360 sitting right next to me as I type this.

  Hear the concern seems to be that the system does not recognize the connection. I recommend you to install the latest drivers and bios (always good to do) and also test cable xbox and hdmi on another facility, such as a TV, to ensure that it works well.

  I would also test other hdmi, if you have a. As a cable box, player roku, tablet screen, other game systems, DVD players, etc.

  Let me know what happens :)

• STR-DA5700ES no video/audio HDMI inputs no

  STR-DA5700ES has no audio/no video inputs HDMI (except PS3 hooked up through GAME that works). It was fine yesterday (for the last 2 years). Now, suddenly, there's nothing. I did a power reset (by holding the button until it has adjusted) and exchanged the HDMI cables. Any suggestions?

  Turns out have been a matter of HDCP, possibly caused by cables, which have now been replaced with new cables by their manufacturer as directed by their guarantee. The problem can only be solved by completely reset the 5700ES (memory clear). Please consult the manual of Sony if you're having a similar problem.