Security and connection string

Similar Questions

• WAN connection between security and connection of servers?

  Hi all

  one of our clients wants to place its servers view Horizon 5.2 security in remote data centers and servers to connect in their headquarters. They have two DMZ environments to hosting provider data centers and they want to fill it with 2 security servers each for redundancy. I have currently no accurate information on the speed and latency (and packet loss). I know that connection servers sharing the same ADLDS need connection to the LAN due to replication requirements strict, but what security servers?

  Can I put my security servers in a region far away and have them matched (and PCoIP routed by gateway) with servers to connect to Headquarters via a WAN connection?

  Kind regards

  Jacques.

  That's fine, as long as they have properly configured firewall rules, but I have to ask: what are they hoping to win this configuration - is-to-end latency lower and upper for remote users of the local data center and then goes on the link of the site, instead of going on the internet directly to the headquarters of the bandwidth?

• could not find a server reports and analysis hyperion running on localhost port 6800. Please check your connection string server and verify that the server is

  Hi all

  We have properly installed and configured Hyperion Reporting and analysis 11.1.2.4 in windows 2012 server however when I try to logint to the workspace, I get an error like "start-up of the specified document does not exist in the repository." "Select a new start under the General Preferences tab document" monitoring of "could not find a server reports and analysis hyperion running on localhost at port 6800. Please check your connection string server and verify that the server is up '.

  
  

  
  

  

  
  

  

  HyS9RaFramework_epmsystem2-syserr:

  GsmNotFound

  com.brio.one.services.globalservicemanager.GSMException: GsmNotFound

  at com.brio.one.services.globalservicemanager.GSMFactory.getGSM (unknown Source)

  to com.brio.one.client.ClientFactory. < init >(Unknown Source)

  to com.brio.one.client.ClientFactory. < init >(Unknown Source)

  to com.brio.one.client.ClientFactory$ ClientFactoryInitializer.connect (unknown Source)

  at com.brio.one.client.ClientFactory.getClientFactoryConnect (unknown Source)

  at com.brio.one.client.ClientFactory.getDefaultGSM (unknown Source)

  at com.brio.one.web.properties.ApplicationProperties.getDefaultGSM (unknown Source)

  at com.brio.one.web.properties.ApplicationProperties.getDefaultGSMContext (unknown Source)

  at com.sqribe.WS.WSBaseServlet.setDefaultGSMContext (unknown Source)

  at com.sqribe.WS.WSBaseServlet.initLogging (unknown Source)

  at com.sqribe.WS.WSBaseServlet.loadConfiguration (unknown Source)

  at com.sqribe.WS.WSBaseServlet.init (unknown Source)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletInitAction.run (StubSecurityHelper.java:283)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)

  at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)

  to weblogic.servlet.internal.StubLifecycleHelper. < init > (StubLifecycleHelper.java:48)

  at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)

  at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1981)

  at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1955)

  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)

  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)

  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

  at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)

  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

  at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)

  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:672)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:52)

  at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

  to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:31)

  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)

  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:246)

  at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)

  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)

  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)

  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  In the workspace, it shows that the Service is pending.

  

  EMP Diagnostic Report:

  

  Can help kindly out how should I solve this problem.

  I restarted the services and rebooted the Machine but still getting the same error.

  Kind regards

  VJ

  
  

  Hello

  I've reconfigured the Reporting, analysis, and everything by, I chose "Drop table" and the issue was resolved.

  Kind regards

  VJ

• Securing internet connection Wi - Fi with Equium L10 and Belkin router

  Hello

  I installed a wireless belkin router on my laptop L10 and have an excellent connection to the internet - everything works fine. However, I would like to secure the connection to prevent indiscreet listening - I tried to do this under the encryption and authentication of the menus, but I'm not sure about the different acronyms used - eg Shared, WEP and WPA for example.

  I tried different combinations of these, but the laptop disconnects just from the router until I return to the connection 'open' standard with encryption disabled. Can someone point me in the right direction... ??

  Hello Dan

  Your router is unknown to me, but encryption is still working on the same path. Check the security settings of your router, then select security options. Set the encryption you want to use (WEP) and the password.
  Your device must be configured as described on this page
  http://LSS.wisc.edu/~Sara/wireless/pcwepconfig.htm

  If everything is done on the right track to avoid any problems. I also use WIFI at home with 64-bit encryption, and I spent 10 minutes for any configuration.

• my connection has always been private and secure, and time and time again this comment spam has somehow broken over and over again in my system and connected to my internet.

  I have my laptop set in place for wireless internet, and had no problems so far. I have a search United Nations guest house living in my house and somehow there manipualted my system (this is what the tech told me that wanted me to pay 125.00 to fix my problems) my connection has always been private and secure, and many and many times this comment spam has somehow broken over and over again in my system and connected to my internet. now, I was looking around and tried to change my settings in the section home group (remember I do not have a residential group set up and never had one) but now I just noticed that somehow this * hole entered my network and set up a homegroup to Siena with password. to top it all off I have went and tried to change the settings for which patients to share with people on my network... and it would allow me to change anything due to accsess denied! He said that I need her password for accsess homepage settings because it has somhow a administrative accsess to eerything on my pc. How can it be a. admin on my network when there is one that is done over the internet through my computer? Please help me. I am sssooo totally lost as to how to do locked out everyto with my computer, I don't want him to have access to anything annnyyyy! PLEASE HELP ME IF SOMEONE HAS ANY INFO THAT CAN HELP ME... Thank you

  If you are not in the residential group, they have no access to your computer. I recommend also define your network as hidden. That way if they do not know what you called, they have not all hope to connect. (Unless they are very good at hacking)

• Connection string database MS using ASP VBScript and DW8

  Hello

  My MS database has worked with DW8 following my use of a connection string in connSci * .asp. My OS is Windows7. It worked well.

  <%
  ' FileName="Connection_ado_conn_string.htm"
  ' Type="ADO" 
  ' DesigntimeType="ADO"
  ' HTTP="true"
  ' Catalog=""
  ' Schema=""
  Dim MM_connSciWeb_STRING
  MM_connSciWeb_STRING = "DSN=DSN_******"
  %>
  

  Now when I update the db and check that additional new records have been added (and they were) I can access than the original documents. When I test the connection string again, I get the 404 error message.

  Can anyone help?

  Concerning

  Kevin

  Is the logbook of your question that provided brégent correct? Please clarify that for us. Connection problems are not uncommon. but they are fixable.the first thing that I think that you have to solve is the error when you test the connection in DW. If you did not change anything in the login script, then it means that something has changed on the server with the DSN or DB file itself, as booth said. Re-check all the files from the server and DB DSN situation with the path to the DB. You can try to delete the DSN and re-create. I also suggest to try a connection without DSN. These were commonly with Access databases for many years, so you should easily be able to find the instructions a quick Google search. .

• SQLite3 connection string?

  Hello

  I have a SQLite3 database file. I read with labivew. I installed the ODBC driver since http://www.ch-werner.de/sqliteodbc/.

  I created the DSN. I would like to read different with their paths .db files.

  If I use directly the DSN 'temperatura' is works very well, but he always read from the path that I put in the configuration of the DSN - name of the database. Check the attached file.

  I would like to have a DC path to read any file, but the connection always read from the same file string. Show it in http://www.connectionstrings.com/sqlite3-odbc-driver/ :

  DRIVER = SQLite3 ODBC Driver; Database = c:\mydb.db; LongNames = 0; Timeout = 1000; NoTXN = 0;
  SyncPragma = NORMAL; StepAPI = 0;

  But it does not work. He has not found the provider.

  On the internet, I found this:

  Provider = MSDASQL.1; initial Catalog = C:\test.db; Persist Security Info = False; DSN = temperatura

  IT works but always read the file corrected in DSN temperatura configured in the ODBC administration

  In the initial catalog, I put another file and read the same thing that sits on the DSN temperatura.

  Somehow I can use good connection to play diferent?

  Concerning

  The SQLite library documentation seems to suggest that simply use it as your connection string:

  Driver = driver ODBC of SQLite3; Database = full-path-to-db;

  What version of LabVIEW are automatically using and that the number of bits (32/64)? There are two versions of the ODBC - one for the 64-bit ODBC drivers connection manager and one for 32-bit ODBC - drivers they are treated separately by the operating system.

  I've never used this library - but there is an alternative that I used and it works fine: http://sine.ni.com/nips/cds/view/p/lang/en/nid/212894

• Vista goes to 50% CPU usage and connects the computer for hours after the beginning

  Original title: Vista processor

  Stupid Vista goes to 50% CPU usage and connects the computer for hours after the start.  Cannot run anything with any request of CPU without getting bogged down and crashing.  It is not windows defender, I suspend this service and the machine is ok for another 1/2 hour, them I'm up to 50% of the CPU.  The idle process said Task Manager is > 90%, still indicates 50% CPU usage and the cooling fan looks like a 747 taking off.  Should I just pull the machine and go for Linux, or what?  Cannot run games or whatever it is, totally disgusted with vista of POS and microsoft can it Deep and do not get windows 7, it is probably worse.  Is that all I can turn off to get the same performance than, say, windows 3.1?  It would be preferable to the current situation.  MSCKMA.

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• ASP connection string problems

  Hello
  
  I have inherited a website and need to make some urgent changes, currently all recordsets is handcoded and is in an absolute mess, I migrated to SQL server to allow me to create new recordsets through DWMX, but the site is far from ready to move to the new DB and I am unable to connect to the DB access.
  
  The database is a db access with a security.mdw file that controls access how can I make changes to my connection string to connect? I have included my latest effort below.
  
  Dim MM_conTest_STRING
  MM_conTest_STRING. Mode = adModeReadWrite
  MM_conTest_STRING. Provider = "Microsoft.Jet.OLEDB.4.0".
  MM_conTest_STRING. ("Properties (" Jet OLEDB: System Database ") = Server.MapPath("***\Security.mdw ")
  MM_conTest_STRING. Properties ("User ID") = «*»
  MM_conTest_STRING. Properties ("password") = «*»
  MM_conTest_STRING. "Open Server.MapPath("***\Database.mdb")
  MM_conTest_STRING = "DRIVER = {Microsoft Access Driver (*.mdb)}; DBQ ="& Server.MapPath("***\Database.mdb")
  
  However this only gets me the following error message:
  Microsoft VBScript runtime (0x800A01A8)
  Object required: "
  fporiginal/connections/conTest.asp, line 9
  
  If I remove everything except the last line, I get the following error:
  Microsoft OLE DB provider for ODBC (0x80004005) drivers
  [Microsoft] [ODBC Microsoft Access driver] You do not have the necessary permissions to use the object '(unknown) '. Ask your system administrator or the person who created this object establish the appropriate permissions for you.
  / fporiginal/categories.asp, line 15
  
  Any help gratefully received
  
  See you soon
  Ossie
  

  Duh! for anyone interested is solved my problem - the answer:

  MM_ConTest_String = "Driver = {Microsoft Access Driver (*.mdb)}; DBQ ="& Server.MapPath("***\Database.mdb") &" SystemDB = "& Server.MapPath("***\Security.mdw") &"; UID = *; pwd = *** "

• Auto unlock with Apple Watch does not appear in my window security and confidentiality

  "Disable the automatic connection' or Auto unlock with Apple Watch" appears in my window security and confidentiality

  Hello

  Automatic unlocking with Apple Watch is available for the Mac models since the mid-2013 and later running macOS Sierra.

  Check that:

  • Your Mac has Bluetooth and Wi - Fi enabled.
  • Your Apple ID use two factor authentication (as opposed to the two-step verification):
    • For Apple ID - Apple Support two-factor authentication
    • If you are currently using two-step verification instead, follow the instructions here to turn off (under "How can I disable two-step verification?") before you enable two-factor authentication:
      • Frequently asked questions about the audit in two steps for Apple ID - Apple Support
  • Your Mac and Apple Watch are connected to iCloud with the same Apple ID:
    • On your Mac, choose Apple () menu > System Preferences, and then click iCloud.
    • On your iPhone, open the Apple Watch app, then go to general > Apple ID.
  • Your Apple Watch uses a password:
    • On your iPhone, open the Apple Watch app, then type the access code.
  • Transfer procedure is enabled on your iPhone and your Mac:
    • On your iPhone, go to: settings > general > transfer procedure.
    • On your Mac, go to: System preferences > General - down, tick the option "Allow transfer between the Mac and your iCloud devices."
    • If these parameters are already enabled, a user has found that it helped to deactivate and reactivate the procedure of transfer on their iPhone.

  More information:

  Automatically unlock your Mac with your Apple Watch - Apple Support

• Security and privacy setting problem

  I have a MacBook Pro, school issued, and I have an administrator account. It is El Capitan version 10.11.4 running

  For a few weeks and I don't know exactly when it started, it was disconnect automatically. In addition, when it disconnects me my password is not always recognized as correct, so I have to reboot to reconnect. I finally found the setting of security and confidentiality that is checked for disconnection after 30 minutes of inactivity and unchecked, it.  However changes to the settings I do not stay, I uncheck the box or change the amount of time before disconnection, he returns in this journal of 30 minutes setting. As a teacher in a busy class I find that more and more frustrating. I can't afford this waste of time if I need to show something to the class on the Board of directors or to find a resource. Can anyone help?

  I guess you just change your connection password, but desynchronization between account password and login Keychain password. You need access to Keychain Access-> Preferences, select 'Synchronize password Keychain with account'. Preferences and access to quick access-> S.o.s. Keychain keychain and repair.

• Unable to access secure Internet connections

  I have my laptop series satellite has recently stopped for allowing me access to secure Internet connections. When I spoke with my Bank's online support, they identified that I will need to reinstall the xp home operating system and it will get it back. Only thing is, is that it came pre-installed, and I did not all discs...

  I don't want to pay a bomb buy new XP - any suggestions on how I can make low-cost cela? I get a new digital / provider internet tv etc Thursday the engineer came to the House to install it and I need to have this problem before it happens (this leaves me a day and a half!)

  Help! Thank you! :)

  Hello

  Try to contact Toshiba service partner allowed in your country and order the original CD from recovery for your unit. I'm sure that it will not cost you much.

  You can find the address under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true

  Good bye

• Satellite L650 Wireless disconnects and connection cannot be retrieved

  Hello everyone,

  I have a connectivity problem with my 3 year old Satellite L650, Windows 7...

  I have a LAN wireless in my house, so that my laptop will automatically connect at startup, without any problem.
  After some time (it can be minutes or hours) it loses signal and disconnects.

  This isn't a real problem, because the router is quite far from here, with walls between which can reduce the signal, so no surprises.
  But I can't reconnect later: connection status icon stops working.

  I mean it shows the image corresponding to "available wifi connections" or "connected but no internet access, but or by clicking on the icon or move the cursor of the mouse on it gives no output... it is responseless, and I can't connect to my wifi or any other wireless network.

  I tried to do it from the control panel - network and sharing Center, but the story is the same, the two "set up a new connection or network" and "connect to a network" is not responding when you click on it.
  The only way to connect is to restart the pc.

  How can I solve this?

  Any suggestion is appreciated,
  Thank you!

  > The only way to connect is to restart the pc.
  In case this question is repeated once again, try to refresh and renew the IP address.

  Go to the console (in the type of search CMD)
  Now use the command: ipconfig / renew

  After this attempt to connect to the Wlan again.

  In which case it would not be useful, I recommend you to change the settings of the router.
  I mean that you need to reset the router. Then, you need to test with different types of protection Wlan Wlan connectivity and other standard Wlan (802 11 B G or N)

  Test also the laptop with open WiFi. I mean, you must disable the encryption settings of the router. But this is only for testing purposes.
  The WiFi network must always be secure.

• LabSQL to MySQL connection string syntax

  Hi all

  I'm just starting using labSQL and MySQL and cannot even connect to the database, I want to start practicing. I tried to write my own code and use the code example, but I can't get a connection to a database. The error is still "an Exception occurred at ADODB. Connection: The operation is not allowed when the object is closed. Help path is C:\Windows\HELP\ADO270. CHM and context in ADO Execute.vi connection 1240653-> Simple.vi". I've set up a system DSN using the MySQL ODBC Unicode 5.2 driver and I'm under Labview 2012 with MySQL Workbench/5.6 Server 5.2. I really just need to know the syntax of the connection string that you pass in the ADO connection open vi.

  Thank you in advance.

  
  

• Pavilion series 6, P6 - 2220t: HP Pavilion P6 - 2220t. All security USB connections are turned off in the BIOS. Need to turn it on.

  I was told that all security USB connections is disabled in the BIOS. The only controls for this PC is USB ports for mouse and keyboard control ect.  How can I get into the bios without keyboard and mouse in operation? There is no other way to control this model computer. The only connections on this PC is only the USB connections. Again, if I can get somehow get into the BIOS I can enable security USB connections as it should.

  UPDATE,

  Fixed a problem.

  I have install a market after card bipassing USB bios usb connections.  I went in the BIOS and turned on USB connections. I figured out the EASY DIFFICULTY and solved the problem myself. No other technology needed in this case.

  Very EASY SOLUTION!

  Thank you