Security problems of wireless network Windows Vista prevents connectivity

Similar Questions

• Problem with wireless network, Windows 8/8.1, Toshiba Sattelite L50-A-1EH

  Hello MS.

  I have problems with my wireless network card. At this point, I think it's maybe a defective hardware. Here's the problem:

  I have an access point SSID which connects, but disconnect every 10-15 minutes. It is offline for a minute until it reconnects automatically or if it is disconnected and I have to reconnect manually it reconnects quickly.

  The laptop is a Toshiba Sattelite L50-A-1EH. Network card: Atheros AR956x.

  To resolve this problem, I tried the following:

  • Install several drivers, Atheros themselves as well as the drivers of Toshiba for this specific model cell phone section.
  • Install these drivers on Windows 8.1, downgraded to Windows 8 (maybe better driver support was my guess, still no luck)
  • Tried driver versions: 0.0.75/0.0.263/0.0.270/0.0.287 (latest)
  • Changed automatic IPv4 DHCP to static IP
  • Modified profile profile manually created for this SSID wireless

  In the event viewer Windows 8 under autoconfiguration service WLAN it says: autoconfiguration WLAN service cannot connect to a wireless network.

  Reason for the failure: the pilot disconnected all combining.

  The router is not the problem, I have several other devices connected to this point of access without any problems, or whatever.

  At this point, I think it is a hardware on the Atheros AR956x card problem because I can not imagine that Toshiba would have a product on the market that is pre-installed with Windows 8.1 which does not work drivers.

  Any thoughts? Very much appreciated.

  Hello badr V.

  Let me let you know that I finally managed to fix the problem.

  I tried a lot of things, but what ended up working was the following:

  Updated the BIOS with the latest version (1.6-> 1.7), decommissioning of 8.1 Windows of Windows 8 and installation of driver in charge of Windows 8. For me, it was 10.0.0.247 who continued to work throughout.

  Thanks for the guide if.

  Yours sincerely,

  Rick Lamers

• Windows Vista detects the wireless network but will not connect to it. Two other users in the same office connect without difficulty.

  The title says it all really.

  I was connected and working normally for about an hour this morning, until suddenly the connection has been lost.
  Windows detects the wireless network but will not connect. Two other users in the same office connect without difficulty.
  Help, please.
  Thank you.
  original title: vista detection network but will not connect

  Hi JulianBeach,

  1. you have made no changes to the computer before the broadcast took place?
  2. What is the exact error message you get?
  3 is connected to the domain of the computer?
  4. what happens when you try to connect to the network?

  Try the steps from the following link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

• Problems connecting to the wireless network windows media

  After having installed AT & T u verse, the installer said I have to use the code of encryption key for the modem/router to connect to wireless network windows media, so I can watch TV.  Windows Media repeat myself that it's the wrong key code. I checked the number again once and he's right. Any help?

  Hello

  I suggest you to visit these links and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/sharing-media-on-a-network-using-Windows-Media-Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/watch-TV-in-Windows-Media-Center

  It will be useful.

• When I go to my list of wireless networks, or try to connect to a network it tells me that windows cannot configure the network.

  Unable to connect because of firewall or something, not true of course

  When I go to my list of wireless networks, or try to connect to a network it tells me that windows cannot configure the network and if I wanted windows to set up the connection, I need to start the firewall/ICS internet service (ICS) service and then he asks me if I want to start now then I say yes , but then it just tells me that it can't because the assoiciated service is not running, can anyone help please.

  Hello

  I suggest you to follow the steps in troubleshooting this article and check if it helps:

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless

  http://support.Microsoft.com/kb/871122

  Also read these articles and check:

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702/en-us?p=1

• Photosmart HP 7520: All wireless network devices will lose connectivity after printing

  Dear all, 
  
      I have a problem with my HP Photosmart 7520 printer where all wireless network devices will lose connectivity after a printer has been sent to the printer.
  
  * Summary
  Wireless network unusable after sending one print to HP printer
  No device ( computers nor smartphones ) can use the Internet nor access internal networks ( 192.168.0/24)
  
  * Details
  Turn HP printer on.  ( wireless direct is off - never turned on )
  HP printer connects to working wireless network.
  Other devices ( phone/computers ) already connected and working.
  From any device, send a document to the printer.
  Printer prints document successfully.
  Immediately after printer has printed all devices cannot access internet IP range ( including HP printer ) nor Internet nor router ( 198.168.0.1 ).
  
  * Reproducibility
  Always
  
  * Work around
  Disconnect all devices from the network.
  Power off printer.
  Reboot Internet router.
  
  * Attempted solutions
  Removed wireless configuration.
  Factory reset.
  Added wireless configuration back.
  Powered on and off printer.
  
  * Printing tested with
  Tested with Macbook10.11/Windows 8/Ubuntu 12/Android 4.4.2
  
  * Not tested
  Ethernet cable directly connected to router.
  
  * Internet Router
  Netgear CG 3700
  

  Number of brand and model of the router?

  These settings are to set up your printer wireless (or wired):

  • Stay connected to your router
  • Trouble printer status 'offline '.
  • Wake mode 'sleep'
  • All wireless devices stay better connected

  While the DHCP is convenient, devices like printers (wired and wireless) should always be assigned a (fixed) IP address manually to avoid conflicts on your wireless network and must be outside the range of the router DHCP.  After the adjustment of the static IP address the computer must be updated to show a Standard TCP/IP port with the IP address of printers under printer properties/Ports.

  1. Set a static in the printer IP address (click here) outside the range of the DHCP of the router (check your manual). It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this first if necessary. More Help Wireless Printing is here and here and still more here.  Video here explains the problem and how to solve the problem. <--> So watch this!
  2. Or check in the printer "Auto Off/sleep/Energy Saving Mode" is disabled the System Mode Time Out is set to zero (0) Use the built-in webserver (EWS) by visiting the printer address IP address in the address bar of your browser, click on settings tab/Auto Off. Or use the printer, printer Home Page (EWS) Wizard. Also check your printer properties.
  3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.
  4. Make sure that the printer is connected directly to a socket wall and not to a UPS, power strip or a lightning arrestor. This will cause the printer to drop offline connection and disconnection (checked yes!).

  Additional measures to take if you continue to have the problem (if they are posted)...

• Windows 8 problem with wireless network adapter

  I had a lot of trouble to stay connected to the internet with my college wireless network on

  my laptop Windows 8. Especially when my computer is endearing to load a large number of data, the connection becomes limited and stops working. I use the resolution of problems and there's always the wireless adapter, which always solve the problem. This problem will not occur on the unsecured network comments from school or home. I tried many solutions to solve the problem, as going to tab the wireless one adapter power management uncheck allow the computer to turn off this device to save power. nothing has worked so far. Here are the details of the detection of the troubleshooter from the last time that this problem occurred:

  Details about network adapter diagnosis: Network adapter Wi-Fi driver information: Description . . . . . . . . . . : Dell Wireless 1704 802.11b/g/n (2.4GHz) Manufacturer . . . . . . . . . : Broadcom Provider . . . . . . . . . . . : Broadcom Version . . . . . . . . . . . : 6.30.59.74 Inf File Name . . . . . . . . . : C:\WINDOWS\INF\oem51.inf Inf File Date . . . . . . . . . : Monday, September 17, 2012 6:52:18 PM Section Name . . . . . . . . . : BCM1704HMD_NT62 Hardware ID . . . . . . . . . . : pci\ven_14e4&dev_4365&subsys_00161028 Instance Status Flags . . . . . : 0x180200a Device Manager Status Code . . : 0 IfType . . . . . . . . . . . . : 71 Physical Media Type . . . . . . : 9

  Diagnostic information (wireless connectivity)

  Details about wireless connectivity diagnosis: Information for connection being diagnosed Interface GUID: 81887e6c-9ddc-413d-be6a-4465ad36cf87 Interface name: Dell Wireless 1704 802.11b/g/n (2.4GHz) Interface type: Native WiFi Connection incident diagnosed Auto Configuration ID: 1 Connection ID: 1 Connection status summary Connection started at: 2015-03-08 14:48:33-522 Profile match: Success Pre-Association: Success Association: Success Security and Authentication: Success List of visible access point(s): 7 item(s) total, 7 item(s) displayed BSSID BSS Type PHY Signal(dB) Chnl/freq SSID ------------------------------------------------------------------------- 28-8A-1C-FE-CA-80 Infra -91 1 smcm-guest 28-8A-1C-FE-0D-80 Infra -50 1 smcm-guest 28-8A-1C-FE-0D-82 Infra -54 1 resnet 28-8A-1C-FE-B5-C0 Infra -48 6 smcm-guest 28-8A-1C-FE-B5-C2 Infra -47 6 resnet 28-8A-1C-FE-3F-40 Infra -91 6 smcm-guest 28-8A-1C-FE-3F-42 Infra -88 6 resnet Connection History Information for Auto Configuration ID 1 List of visible networks: 2 item(s) total, 2 item(s) displayed BSS Type PHY Security Signal(RSSI) Compatible SSID ------------------------------------------------------------------------------ Infra No 87 Yes smcm-guest Infra Yes 87 Yes resnet List of preferred networks: 5 item(s) Profile: mobilenet SSID: mobilenet SSID length: 9 Connection mode: Infra Security: No Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: NETGEAR30 SSID: NETGEAR30 SSID length: 9 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: Yeager Network SSID: Yeager Network SSID length: 14 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: resnet SSID: resnet SSID length: 6 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: Yes Profile: smcm-guest SSID: smcm-guest SSID length: 10 Connection mode: Infra Security: No Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028001 Information for Connection ID 1 Connection started at: 2015-03-08 14:48:33-522 Auto Configuration ID: 1 Profile: resnet SSID: resnet SSID length: 6 Connection mode: Infra Security: Yes Pre-Association and Association Connectivity settings provided by hardware manufacturer (IHV): No Security settings provided by hardware manufacturer (IHV): No Profile matches network requirements: Success Pre-association status: Success Association status: Success Last AP: 28-8a-1c-fe-b5-c2 Security and Authentication Configured security type: WPA2-802.1X Configured encryption type: CCMP(AES) 802.1X protocol: Yes Authentication mode: User only EAP type: Authentication not started Number of 802.1X restarts: 0 Number of 802.1X failures: 0 802.1X status: Success Key exchange initiated: Yes Unicast key received: Yes Multicast key received: Yes Number of security packets received: 13 Number of security packets sent: 13 Security attempt status: Success Connectivity Packet statistics Ndis Rx: 400791 Ndis Tx: 204956 Unicast decrypt success: 0 Multicast decrypt success: 0 Unicast decrypt failure: 0 Multicast decrypt failure: 0 Rx success: 1632 Rx failure: 846 Tx success: 240 Tx failure: 0 Tx retry: 24 Tx multiple retry: 12 Tx max lifetime exceeded: 0 Tx ACK failure: 60 Roaming history: 0 item(s)

  Diagnostic information (wireless connectivity)

  Details about wireless connectivity diagnosis: For complete information about this session see the wireless connectivity information event. Helper Class: Auto Configuration Initialize status: Success Information for connection being diagnosed Interface GUID: 81887e6c-9ddc-413d-be6a-4465ad36cf87 Interface name: Dell Wireless 1704 802.11b/g/n (2.4GHz) Interface type: Native WiFi Result of diagnosis: There may be problem

  Diagnostic information (wireless network adapter)

  Details about wireless network adapter diagnosis: For complete information about this session see the wireless connectivity information event. Helper Class: Native WiFi MSM Initialize status: Success Information for connection being diagnosed Interface GUID: 81887e6c-9ddc-413d-be6a-4465ad36cf87 Interface name: Dell Wireless 1704 802.11b/g/n (2.4GHz) Interface type: Native WiFi Profile: resnet SSID: resnet SSID length: 6 Connection mode: Infra Security: Yes Connect even if network is not broadcasting: Yes Result of diagnosis: There may be problem

  Thanks for any help! It happened for about eight months and it's really frustrating.

  Hello

  Check with Dell and Broadcom, their documentation diagnostics online and drivers.
  and ask questions in the forums about known problems. The two Dell driver update, then
  Broadcom if there is more recent.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  Dell PC Diagnostics
  http://www.Dell.com/support/Diagnostics/us/en/19/
  Broadcom - downloads and Customer Support
  http://www.Broadcom.com/support/

  ==============================

  More troubleshooting:

  It is possible that the drivers you use, even if later now available, are not
  100% Windows compatible 8.1. Check with the manufacturer of your system (motherboard support
  Manufacturer of custom systems) and/or the manufacturer of the device. This one, like Intel,
  RealTek, Atheros and others may have newer versions is not available to the mother of system
  -site of the manufacturer on board. And continue to check in with them regularly over the next year.
  Also update the BIOS, drivers from the chipset of low level and major embedded and separate
  device drivers.

  Download your applications and devices in Windows 8.1
  http://Windows.Microsoft.com/en-in/Windows-8/get-apps-devices-working

  =========================================================

  Don't forget to check the updates of the firmware on the router, because who can have a definite effect
  on connections Windows 8.1 same if other OS systems connections are fine.

  Check with support of the manufacturer of the system (motherboard for customized systems manufacturer) and/or
  the manufacturer of real device driver updates. If there is no newer versions re - install the same
  ones. Ask known in their forums (if any) problems.

  ===================================

  General resolution: (after the above if necessary)

  Free Wi - Fi and wireless problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note the use of Win Key + X and Win Key + W (to access control panel, run,
  and settings according to needs). Win + D key calls to the office and use
  Win Key activates / deactivates the desktop and start screen.

  --------------------------------------------------------------

  Control Panel - Network and sharing Center - solve problems

  References to Vista also apply to Windows 7 and Windows 8.
  
  Your router be guess here, you have successfully updated the firmware a possible
  solution? And I would update your WiFi drivers on computers. How far away are they
  you have set in the router? Are there obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click
  top - tab of the driver - write version - click on update driver (can't do
  nothing that MS is far behind the certification of drivers). Then right click on the Wifi
  Device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system Maker you can see the same device manufacturer
  more recent versions. (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other update
  Drivers Windows 8 like updated drivers.

  The adapter in Microsoft Windows 8/8.1 network problems - how to fix? (Do not forget to see
  This section-> update the NIC driver).
  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Drivers and Microsoft - Windows 8/8.1 - material
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Microsoft Windows 8/8.1 - Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Microsoft Windows 8/8.1 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly
  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - set up a new connection or network

  -----------------------------------------------------

  And:

  TechingItEasy - how to join a Wi - Fi network in Windows 8 by MVP Andre Da Costa
  http://techingiteasy.WordPress.com/2012/06/09/how-to-join-a-Wi-Fi-network-in-Windows-8/

  Microsoft - Windows 8/8.1 - Web & Networking
  http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8

  Microsoft - Windows 8/8.1 - Wi - Fi & Networking
  http://Windows.Microsoft.com/en-us/Windows-8/WiFi-networking#1TC=T1

  -----------------------------------------------------

  Microsoft - Windows 7 - Why is my Internet connection so slow? (applies to Windows 8)
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Microsoft - Windows 8/8.1 - wired and wireless in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Wireless connectivity problems: Windows Vista displays connected to the internet with good signal, but cannot access the internet more than a few seconds.

  Hello

  Recently, I brought a Dell with Windows Vista and a Belkin Wireless adapter in my house somewhere else. The computer has never had problems connecting to wireless internet on the other networks, however since the move I was not able to access the internet. Sometimes the network shows only a local connection and not Internet and other times, the network has a strong signal, a network identified and even an internet connection, but when I open any browser, it is only able to load the Google homepage and I cannot navigate anywhere else. I turned off all firewalls and even uninstalled all 3rd party software protection. I checked all my browser settings and made sure they detect automatically the IP settings and proxy settings. In other words everything seems in good shape, but I still have no navigation capability. Any ideas?

  It turns out that I had to remove all the old Wireless USB software that had been used previously (there had been other versions of Belkin and Linksys). I then used the computer from my friend to download suitable driver on the Belkin site for the internet adapter USB I used and BAM.

• Can not activate wireless after Windows vista install driver problem?

  Hi all

  Don't know if this is the right place for the post, if not I apologize in advance.

  I have a Compaq Presario C700 (C730EM) on which the hard drive died on me, I have brought a new and installed Windows Vista disc premium edition (not a backup / recovery disc).

  Everything seems fine but I can't turn on the wireless, the C700 has a button at the top wireless rough (which has a red LED when not away) to the left side. Normally impose you it, and it lights up (turns blue LED) but nothing!

  I have commented on Wi-wired and update windows etc and have tired to find wireless driver I guess that I'm missing? You are not sure if it's wireless missing driver or a keyboard driver?

  After installing a few drivers I found where time no joy!

  Can anyone help?

  See you soon

  P

  You are the very welcome.

  This driver below should set you straight up.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99392-1&cc=us&DLC=en&LC=en

  Best regards

  Paul

• HP pavilion d4790y windows Vista cannot connect to internet unless you use WEP wireless

  I have a HP Pavilion with Windows Vista 32 bit home premium d4790y.  I can connect to my ISP wireless router using the HP internal network adapter, but the connection between the router and the internet does not work unless I downgrade the router security to WEP.  If I connect to the router via a wired connection, I can connect to the internet without problem even with WPA2.  I did all the troubleshooting steps recommended as reset the router to check updated network adapter, uninstall/reinstall the network adapter driver, driver release and renew the ip configuration, etc.  Information?  Is there a newer driver that is not recognized during the update search process?

  Hello

  It is a hardware thing and the wireless card does not support this. Changing the wireless card can be the way to go.

  I hope this helps.

• Error cannot access Internet wireless in Windows Vista

  Original title: im trying to connect to my internet at home, but he says there is no internet access how to fix

  I try to connect my internet home for my laptop, cordless, but when its connected he said thar is without internet access how to fix?

  Hello

  1. What is the exact error message you get?

  2. you use a wireless connection to connect to the internet?

  3 when was the last time it was working fine?

  4. do you have security software installed on the computer?

  5 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  If the steps do not help then I suggest you to go to method 2.

  Method 2:

  I suggest you to go through the steps mentioned in the link and the Coachman.

  You cannot connect to a wireless network on a Windows Vista-based computer

  http://support.Microsoft.com/kb/935222

  Hope this helps and keep us informed if you need help.

• Wireless networks Windows Zero configuration is not available

  I have a Thinkpad under XP Pro SP3.

  Recently, I installed a wireless router and tried to connect the Thinkpad wireless, but the success of withoutr.

  I activated the Automatic Configuration Service and the ball of the taskbar says there are available wireless networks, but when I click on the ball, the windows box opens but says that there are no available networks.

  If I click on the option of networks to find, he returned after several seconds, only confirming that no network available.

  My cable connection is fine. Can I use other laptops wireless without any problem.

  Hi Tony24,

  1. You have security software installed on the computer?
  2. What is the number and model of the wireless router?

  Method 1

  Refer to the article below and run the fixit tool available, check if it helps.

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless

  http://support.Microsoft.com/kb/871122

  Method 2

  Check out the articles below and try the steps mentioned, check if it helps.

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

• How can I remove duplication on my SSID wireless in windows vista...

  I have a new loptop with windows vista OS... my problem is, when I connect to my wireless network, it will duplicate the SSID I'm connected... for example my SSID is mywireless. It is say here is that I am bound to mywireless and another is also connected to mywireless2. then when I disconnect 1 of them it unplug all. What should I do to remove the connection on the other?

  Open network and sharing Center , and then click Customize (to the left of your current network name). Click down left on merge or delete network connections and delete or merge as you wish. MS - MVP Windows Desktop Experience, "when everything has failed, read the operating instructions.

• I need help setting up my home network - windows vista.

  I need help to configure my network, I ave a laptop & hubby the computer w / dsl wireless rouuter. If I can get trhis to work, maybe we can work on the printer.

  Original title: help w / home network

  Hi Luvy,

  Thanks for posting your query in the Microsoft Community Forums!

  Looks like you need information to set up home networking on the windows vista computer.

  We're here to help and guide you in the right direction.

  -What is the number of brand and model of the computer?

  I suggest you to return the items online help and check if it helps.

  Setting up a network home

  http://Windows.Microsoft.com/en-in/Windows-Vista/setting-up-a-home-network

  Setting up a wireless network

  http://Windows.Microsoft.com/en-in/Windows-Vista/setting-up-a-wireless-network

  To install the printer on the network see Help below articles.

  Install a printer on a home network

  http://Windows.Microsoft.com/en-in/Windows-Vista/install-a-printer-on-a-home-network

   

  Share a printer

  http://Windows.Microsoft.com/en-in/Windows-Vista/share-a-printer

  It will be useful.

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• Satellite A200-22I - DHCP and SENSE of the problems when you start Windows Vista

  When I started my laptop yesterday, I noticed it was going quite slowly, more there was a message saying that windows could not connect to a specified service.

  As a result my firewall was off tour and I can t connect to the internet. I tried to turn on the firewall, but I couldn't... and today, I tried another connection to inalambric, but I couldn't connect to the internet.

  I checked the registry of the solution and the problem and found it was something related to DHCP and sense.

  But really, I don - t know what causes this problem...

  I searched other forums where people have had the same problem but I could t find any solution apart from reinstalling Vista...

  Can someone help me? Help will be very appreciated!

  Thank you

  Hello

  What do you mean with SENSE? I never heard tell about.

  I put t know what are the causes of the problem too but did you look in Event Viewer? Sometimes, it's really useful.
  If you have a network problem, you must update the driver WLAN or LAN (depending on whether you are using). You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  It would be interesting to know what Windows service, you mean. View more information on this error.

  Welcome them