Wireless networks Windows Zero configuration is not available

Similar Questions

• Wireless zero configuration does not start automatically. I need to run it whenever I restart the computer

  Wireless zero configuration does not start automatically.i have to start whenever I restart the computer. I have a laptop dell inspiron

  Moved from feedback

  Original title: WiFi

  Hello

  1. what version of Windows is installed on the computer?

  2. is it works much earlier?

  3 have there been recent changes made on the computer before the show?

  To activate the Configuration service automatic wireless so it starts automatically, click the Start button. Select settings , then select Control Panel.

  If you use Windows XP display, select the performance and Maintenance category, and then select Administrative Tools.

  If you use Classic view, and then select Administrative Tools. In the left pane, click the Services icon. Click the automatic Wireless Configuration icon in the right pane, and change the box Startup Type to Automatic.

  This parameter will be defined the service starts automatically at boot time. Then click on the Start button to start the Wireless Auto Configuration service zero wireless and click on the OK button.

  The automatic Wireless Configuration can also be started and stopped from a command prompt.

  To start the automatic Wireless Configuration, run the following command:

  net start wzcsvc

  To stop the automatic Wireless Configuration, run the following command:

  net stop wzcsvc

  For more information, see the link.

  Wireless Zero Configuration Reference

  Please post back with the results and we will be happy to help you further.

• missing Windows zero configuration service

  Running Vista and Netgear router for a few years with no problem, use wireless.   Wireless a few days ago has stopped working. Began to go by the verification of the router (which works very well with ethernet cables) and then discovered that the Windows Automatic Configuration does not exist on my machine - I know it's there in the past as I'd start the service to activate my laptop Dell Inspiron 640 to connect to Netgear.

  Tried to download the LAN API (KB918997) wireless to Microsoft Down Center but it fails after run and install with a message "not enough memory is available to process this command."
  Help would be appreciated to reinstall WZC - I searched my computer for wzc.inf nothing works.

  Hello

  Its name changed under Vista/7

  It's now called WLAN.

  http://www.ezlan.NET/Vista/WLAN.jpg

  The name is different, but the idea is always the same.

  http://www.ezlan.NET/WZC.html

• Problems connecting to the wireless network windows media

  After having installed AT & T u verse, the installer said I have to use the code of encryption key for the modem/router to connect to wireless network windows media, so I can watch TV.  Windows Media repeat myself that it's the wrong key code. I checked the number again once and he's right. Any help?

  Hello

  I suggest you to visit these links and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/sharing-media-on-a-network-using-Windows-Media-Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/watch-TV-in-Windows-Media-Center

  It will be useful.

• WINDOWS ANYTIME UPGRADE IS NOT AVAILABLE IN THIS EDITION OF WINDOWS

  has installed windows 7 pro on pc when I try to update to ultimate pop a message "WINDOWS ANYTIME UPGRADE IS NOT AVAILABLE in this EDITION OF WINDOWS.

  I can't contact my manufacturer to pc because I changed to long distances.  Can you please tell me how to get rid of the message and upgrade to the version of windows

  Hi Isabelle,.

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem can occur if necessary, updates are not installed or not installed in Windows.

  I suggest you use the steps in this article and check if it helps.
  Reference:
  Windows Anytime Upgrade fails with the error "anytime upgrade failed. Go online to solve the problem.
  https://support.Microsoft.com/en-us/KB/2658652

  Additional information:
  Upgrade to another edition of Windows 7 by using Windows Anytime Upgrade
  http://Windows.Microsoft.com/en-us/Windows7/help/videos/upgrade-to-another-edition-of-Windows-7-by-using-Windows-Anytime-Upgrade

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Backup/restore of errors Windows 8 feature is not available in a portable workstation environment

  I get the following error message when you try to disable the calendar jobs '

  Backup/restore of errors Windows 8 feature is not available in a portable workstation environment

  I'm on a desktop computer,

  Thank you James. This procedure has helped and I can see the option to backup again to 8/7 of window control center. What I did wrong in the first place was canceled the backup on an external disk, formatted the disc one plugged a new drive. Then, I was not able to click on the link "Backup." Its now fixed. Is some other problem with the problem of recognition of backup or drive window, try this procedure by Michael below.

  Follow these steps to remove the value of register Windows To Go:

  • Open regedit.exe
  • Navigate to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
  • Delete this value: PortableOperatingSystem

  You'll probably notice that the problem reappears when you connect a USB drive in the PC. Subsequent removal of this drive will cause the PC to crash. This occurs because the unique identifiers of the USB drive and the internal HARD disk are the same. To resolve this problem, the simplest method is to "clean" the disc. A cleaning will destroy all data on the disk, so backup first.

  1. Open diskpart.exe
  2. Type "list disk" to determine the number of disk to the USB drive.
  3. Type "select disk #", where # is the number of disk you determined.
  4. Type "own."
  5. Type "exit".

  Restart your PC. You can use diskmgmt.msc and diskpart.exe to repartition your drive USB to use it normally.

  • Proposed as answer by Michael Raymond [MSFT] Tuesday, October 23, 2012 21:22

• Wireless Zero Configuration Service not installed

  original title: Wireless Zero transactional Service not installed

  My top of Office XP Sp3 Dell doesn't seem to have the Automatic Configuration Wireless installed under the heading 'Services '. How can I install?

  1. click on the Start button and then click Control Panel.
  2. If you are in category view, then click Network and Internet connections icon, then click the network connections. If you are in Classic view, double-click the network connections icon.
  3. in the window network connections, LAN or Internet high speed, select the icon to connect to the Local network. In the menu bar, click on file and select Properties, or simply right-click on the Local area connection icon and select properties from the context menu).
  4. in the Properties window of connection of LAN, on the general tab, click install.
  5. in the window select the component Type of the network under "The type of network component you want to install, click" click to select the icon of the Service, and then click the Add button.
  6. in the Select Network Service window, click on the diskette provided button, click the Browse button.
  7. in the window to locate file, navigate to the C:\Windows\Inf folder (this is a hidden folder). Click to select NETWZC. INF, and then click the Open button.
  8. in the window to install it from the disc, click on the OK button.
  9. in the window select the Service network, in the Network Service box, select Microsoft as the manufacturer, and then click Wireless Auto Configuration.
  10. click on the OK button.

• 6980 HP on network, no two-sided printing unit equipped with Windows 8 Pro. Not available manual duplex printing

  Windows 8 picked up my network printer and installed the drivers very well.

  When I go to print, "manual duplex printing" is not available on PRINT ON BOTH SIDES.

  The only option is 'off '.

  Went through Control Panel to CUSTOMIZE YOUR PRINTER and manual duplexing is enabled for this printer!

  Kind regards

  Richard

  PS works fine on my machine windows 7 on the same network

  New driver for 6980 downloaded automatically by windows 8. Now works fine

• wireless network is no longer listed under "available wireless network.

  Have a router MN-500 with modem cable connection. Wireless connectivity has been running successfully for months. Came home last night during a snowstorm - apparently we had lost power temporarily while I was gone, as the clocks were flashing. Turned on my laptop (where I connect to wireless internet) and discovered that my own wireless network was is no longer listed under available wireless networks. Then I noticed on the router all lights were lit on the router with the exception of 4 ports. I disconnected and reconnected. Then I reset with a paperclip. Always shows does not itself. Now, I don't know what to do; even do not know where the shoe pinches. Although I managed to set up the network by myself I'm not a computer expert. We can connect by cable via the router, but my wireless network has apparently disappeared. Any ideas/suggestions? Thank you.

  If you connect to the router via a wired connection, you can check the status of the wireless.  Frankly, this router does not provide you with a good security because he can't stand that WEP (do not forget that it is b only). For reasons of safety only, you must consider replacing by a modern router that supports WPA2. If you have computers more former with older operating systems and wireless network cards that don't support WPA, take into account risk - data theft, identity theft, etc.

  Another response of the community of Windows XP newsgroups

• My internet rpet 'unidentified network' + "the default gateway is not available"...

  My internet was working fine before, but now repeat me 'unidentified network' and I know that's not my internet because I have another laptop that uses the internet itself very well. Then when I try to solve problems, he said "the default gateway is not available"... of the suggestions?

  Hello

  ·         Did you do last changes made on your computer before the show?

  ·         Using internet connection wired or wireless?

  Method 1:

  Follow the steps in troubleshooting from the link and check if that helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Temporarily disable the firewall on your computer and check if it makes a difference.

  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Note: Makes sure to turn Windows Firewall back, once you have done the troubleshooting.

  Method 3:

  Reset WINSOCK, TCP/IP IPv4 and IPv6 TCP/IP stack.
  a. Click Start and in the search box, type cmd.
  b. right click on command prompt, select "Run as Administrator" to open a command prompt.
  c. at the command prompt, type the following commands:
  netsh winsock reset catalog which resets the WINSOCK entries to the default installation.
  netsh int ipv4 reset reset.log that resets the stack TCP/IP IPv4 default installation.
  netsh int ipv6 reset reset.log resets the default install IPv6 TCP/IP stack.
  d. restart the computer.

  Also, see this KB article:

  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Kind regards

• Unable to connect to the wireless network, Windows error cannot communicate with the device or the reaource (primary DNS server)

  Original title: internet connection problem

  Hey,.

  I use a wireless connection at home, it works very well in my android and apple gadget, but it does not work for my laptop. It is said:

  1. Windows cannot communicate with the device or the reaource (primary DNS server)

  2. the connection between the Internet and your access point, router or cable modem is broken

  3 problem with access point or wireless adapter

  I think it's an effects of virus or something?  Because yesterday it works really well. How can I fix? Thank you very much

  Hello Hildegard Lydia,

  You may experience this problem for a number of reasons. Some common problems that can cause these problems are: drivers damaged or incompatible, updates missing, network connection settings, hardware problems or software or TCP/IP can sometimes be damaged or corrupted.

  What is the brand and model of your computer?

  Please follow the steps mentioned below:

  Method 1: a component of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered. If you can't connect to the Internet and you have tried all other methods to solve the problem, TCP/IP can be causing it.
  I suggest you try to reset the TCP/IP stack.
  http://support.Microsoft.com/kb/299357

  Method 2:

  I suggest that you refer to the following link:

  Why can't I find a wireless network?

  http://Windows.Microsoft.com/en-CA/Windows/cant-find-wireless-network#1TC=Windows-7

  Method 3:

  See the steps in the following link and check:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-CA/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Please an update on the status of the issue to help you further.

• Unstable wireless network (windows 7)

  I have the unstable wireless network. It goes up and down, very often it is said that there is no internet connection.
  I'm a meter the router, I have not all devices that could interrupt my wireless network.  I also tried disabling my wirewall and my computer of viruses (no found) scanning. I have another computer with the cable network, and it works perfectly. I use a router D-Link (DIR - 615). What could be the problem?

  It may be worth trying to change the channel that your wireless router is configured to use, there may be interference from other wireless devices or the surrounding networks. What a b/g or n wireless network?

• Wireless networking works, but cable dose not

  My NAT type has been closed and I opened my router page to see if the ports are open, they were not, but the fact is that I've wound up with making a single change to routers setting but now my wired connection does not work but my dose wireless. I have reset the router, the modem, does a system restored, reset the switch and no change. Internet pages just load and load and never expire while my wireless works fine, I do that through my phone, so I'll try to give you this info I can but if I have to type all of this will take a while.

  Windows 7 32 bit
  Time of modem Warrener (brand name not sorry)
  Linksys e1000 router
  And switch ezxs55w
  Let me know what information you need.

  Hello

  Do you receive an error message or error code?

  Try the following and see if it helps.
  
  Method 1:

  Run the Windows 7 network troubleshooting. http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  
  Method 2:

  In the Windows wireless network connection problems:
  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows?T1=tab04

  Problems in Windows wireless and wired network connection:http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

• Problem with wireless network, Windows 8/8.1, Toshiba Sattelite L50-A-1EH

  Hello MS.

  I have problems with my wireless network card. At this point, I think it's maybe a defective hardware. Here's the problem:

  I have an access point SSID which connects, but disconnect every 10-15 minutes. It is offline for a minute until it reconnects automatically or if it is disconnected and I have to reconnect manually it reconnects quickly.

  The laptop is a Toshiba Sattelite L50-A-1EH. Network card: Atheros AR956x.

  To resolve this problem, I tried the following:

  • Install several drivers, Atheros themselves as well as the drivers of Toshiba for this specific model cell phone section.
  • Install these drivers on Windows 8.1, downgraded to Windows 8 (maybe better driver support was my guess, still no luck)
  • Tried driver versions: 0.0.75/0.0.263/0.0.270/0.0.287 (latest)
  • Changed automatic IPv4 DHCP to static IP
  • Modified profile profile manually created for this SSID wireless

  In the event viewer Windows 8 under autoconfiguration service WLAN it says: autoconfiguration WLAN service cannot connect to a wireless network.

  Reason for the failure: the pilot disconnected all combining.

  The router is not the problem, I have several other devices connected to this point of access without any problems, or whatever.

  At this point, I think it is a hardware on the Atheros AR956x card problem because I can not imagine that Toshiba would have a product on the market that is pre-installed with Windows 8.1 which does not work drivers.

  Any thoughts? Very much appreciated.

  Hello badr V.

  Let me let you know that I finally managed to fix the problem.

  I tried a lot of things, but what ended up working was the following:

  Updated the BIOS with the latest version (1.6-> 1.7), decommissioning of 8.1 Windows of Windows 8 and installation of driver in charge of Windows 8. For me, it was 10.0.0.247 who continued to work throughout.

  Thanks for the guide if.

  Yours sincerely,

  Rick Lamers

• How to install the screen on a pc keyboard? I have re-installed windows but OSK is not available.

  OSK is not available nor can find easy access.

  Hello

  On screen keyboard is available by default on the computer. I suggest you try the steps from the following link to open the keyboard to the screen.

  Open and customize the Visual keyboard

  http://Windows.Microsoft.com/en-in/Windows-XP/Help/on-screen-keyboard

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.