See dekstops and dynamic DNS updates

Similar Questions

• Dynamic DNS update of IPv4 addresses does not not in Windows 7

  Several months ago, we noticed behaviors incompatible with Windows 7 clients and their entry in DNS Active Directory.

  The main problem is that our Windows 7 clients only will be not systematically their IPv4 address in Active Directory DNS by using dynamic DNS (RFC2136)

  Initial question:

  • A handful of customers will register its IPv4 address, but it is a minority and most don't (this is the main question)
  • We use the public IP address space.
  • Customers have been constantly recording the IPv6 address for 6to4 in DNS card but not its IPv4 address.

  We have disabled the 6to4 map by using Group Policy, because we do not use IPv6 and don't plan to use the 6to4 transition.

  Secondary issue:

  • Customers is no longer recording card 6to4 in DNS (good)
  • Majority of customers do not yet record their (bad) IPv4 address.

  What I've checked so far:

  • Analysis using Wireshark:
    • Most clients make no request for SOA record and therefore do not try to send dynamic DNS updates.
    • Some customers get the AD zone SOA record and then send the DNS dynamic update to one of the DCs.
    • I see nothing of clearly different on clients who send updates and those who are not.
    • All the other AD related traffic, for example request/response for domain/ldap SRV record looks normal.
  • Settings on the client:
    • The IPv4 adapter "save addresses for this connection in DNS" checked.
    • The primary DNS suffix is the same as our AD domain name.
    • The AD domain name is a COMPLETE domain name.
    • Use us group policy to apply the primary DNS suffix and some connection specific suffixes.
    • Customers do everything they are supposed to; as access to shared resources, printers, etc. - just not update DNS.

  I read all of the following, but I'm no further forward:

  DNS of processes and Interactions

  https://TechNet.Microsoft.com/en-us/library/dd197552 (v = ws.10) .aspx

  Understanding dynamic update

  https://TechNet.Microsoft.com/en-us/library/cc771255 (v = ws.11) .aspx

  Does anyone have ideas/tools/scripts which may be able to progress my troubleshooting?

  Darren.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Internet connection sharing and dynamic dns.

  Hi all.

  Thank you for taking the time to read my message and respond. Much appreciated :-)

  I have an old machine to windows xp with a usb key with an internet connection while I wait for my fiber :-)

  I also have another piece of equipment connected via a crossover cable and they share internet and local traffic.

  The other piece of equipment has a service that is running on what I can access locally, but I wish I could use around the web.

  I have signed up for a dynamic dns account and have a host name.

  I've assigned my public ip address for the host name, then im stuck. I tried several times and countless forums but I can't get my head around dynamic dns process. Can someone inform me?

  the service runs on a particular port, and I know that I need to port forward, but I normally would in a router and I'm wundering is there a way to do it under windows?

  Any help would be appreciated.

  And I know diet teaspoon is not an option.

  Thank you
  H

  Hi Haehjen,

  You will need to open the ports in the security software installed on the computer for the task you want to perform.

  Windows Firewall may block some programs to communicate on the Internet after you install Windows XP Service Pack 2

  http://support.Microsoft.com/kb/842242

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?

  http://support.Microsoft.com/kb/283673

  Distance issues, I would say that you post your question in the TechNet forums.

  http://social.technet.Microsoft.com/forums/en-us/categories/

• WRV200/Quick VPN and dynamic DNS

  Linksys supports States that I need to contact verizon DSL to get a public IP address and set up a "bridge connection" in the DSL modem.  I would try even when using dynamic DNS.  If someone is successful with this change I would appreciate some tips

  To use the dynamic DNS on the WRV you will need a public IP address on the WRV and for what the modem needs to be filled. This brings you straight to where you already are.

• WRVS4400N and dynamic DNS

  I need assistance with my WRVS4400N (its Firmware Version on: V1.1.03, I think that the more recent on this product) with VPN.

  At one end of the IPSEC VPN is this router. three other ends are WRV210.

  I noticed that if if I have a site that has an ISP who changes IP very frequently (in this example 2 site), the problem is that the WRVS4400N will know the new IP address on the summary page, but retain the old IP on the configuration page.

  Here's what I mean.

  (1) if I set up the following VPN will display.

  N ° name State P2 Enc/Auth Local Group remote control Remote Gateway
  1 place 192.168.1.0/24 BRANCH1 192.168.100.0/24 3DES/SHA-1 221.100.100.10
  BRANCH2 2 place 192.168.2.0/24 192.168.100.0/24 3DES/SHA-1 221.100.100.20< notice="" this="" is="">
  3 place 192.168.3.0/24 BRANCH3 192.168.100.0/24 3DES/SHA-1 221.100.100.30

  (2) if 2 PSI (short DHCP lease time) branch forced a change in intellectual property

  N ° name State P2 Enc/Auth Local Group remote control Remote Gateway
  1 place 192.168.1.0/24 BRANCH1 192.168.100.0/24 3DES/SHA-1 221.100.100.10
  2 Down3DES/SHA-1 192.168.100.0/24 192.168.2.0/24 221.100.100.22 BRANCH2< new="" ip="" is="">
  3 place 192.168.3.0/24 BRANCH3 192.168.100.0/24 3DES/SHA-1 221.100.100.30

  (3) what I'm doing is:

  (3A) go to change Edit, Branch2, the remote gateway IP/resolved by the DNS to IP/IP, and I see

  IP resolved by the DNS: branch2.dyndns.org---> IP address: 221.100.100.20 (note that it retains the old IP)

  I change to the new IP 221.100.100.22 and the tunnel will go up

  (3B) or simply reboot the router and the tunnel will go up.

  It seems that the problem is a bug in the firmware, when I really need to do something is the ' ipconfig/flushdns' line on the box.

  Is that what anyone has experienced the same problem?

  ======================================

  -Main WRVS4400N router-

  DDNS service provider: DynDNS.org
  Host name: main100.dyndns.org
  Internet IP address: 221.200.200.1
  Status: enabled

  Type of local security gateway: IP only
  Local Security Gateway IP Address: 221.200.200.1 (this sample provide by my ISP)

  Local security group type: subnet
  Local security IP address group: 192.168.100.0
  Local security group of subnet: 255.255.255.0

  Remote security gateway type: IP only
  The gateway security remote DNS IP resolved: branch1.dyndns.org (branch2.dyndns.org for the second, third branch3.dyndns.org)

  Security remote control unit Type: subnet
  Security group remote IP address: 192.168.1.0 (on second 192.168.2.0, 192.168.3.0 third)
  Group of security remote subnet: 255.255.255.0

  -Branch WRV210 router-

  DDNS service provider: DynDNS.org
  Host name: branch1.dyndns.org
  IP Internet address: 221.100.100.10 (first sample; 221.100.100.20 second 221.100.100.30 on the third)
  Status: enabled

  Local security group type: subnet
  Local group of Secure IP: 192.168.1.0 (on second 192.168.2.0, 192.168.3.0 third)
  Security group local subnet: 255.255.255.0

  Remote secure group type: subnet
  Remote secure group IP: 192.168.100.0
  Group secure remote subnet 255.255.255.0

  Secure remote gateway type: COMPLETE domain name
  Entry remote secure gateway: main100.dyndns.org

  This problem was solved when I upgraded to version 1.1.13.

• SSL VPN and Dynamic DNS - ddns on IOS

  Hello

  I am configuring a VPN SSL via SDM tunnel on a 877 router. The router gets the dynamic public IP address from the ISP, so I configured DDNS for remote access to the router. I would like to know if it is possible to configure the SSL VPN to support dynamic IP via SDM o CLI.

  Concerning

  Gerard

  Looks like I fixed the problem using:

  WebVPN gateway gateway_1

  interface Dialer0 port 443 of intellectual property

  SSL local trustpoint

  development

  However when the router restarts, it generates this error:

  Incorrect ip address first configure the gateway IP address

  No idea how to postpone orders for webvpn start until dialer0 Gets a dynamic IP address?

• External address of Mgmt - DHCP/Dynamic DNS

  Hello

  My client is looking to assign the "external Mgmt addresses' for their B series server blades (KVM) via DHCP and dynamic DNS instead of a statically defined pool.

  Grateful if someone can confirm if this possible?

  Regards, Paul

  Hey Robinson,

  How are you? IP to KVM management can only be assigned statically to the MMIC or be affected by an ip pool.

  See the link below

  Managament (UCS 2.1) Ip addresses

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/SW/GUI/config/Guide/2.1/b_UCSM_GUI_Configuration_Guide_2_1_chapter_011101.html#concept_8D1CF1E427424A8AA1ED7E26B31B9227

• Since the upgrade to 2015 CC and change my site to a paid site, can my customers is more updated of the site through the browser update. When they try, parts and pieces of the site appear and they can see what it takes to update. It's about to make me los

  Since the upgrade to 2015 CC and change my site to a paid site, can my customers is more updated of the site through the browser update. When they try, parts and pieces of the site appear and they can see what it takes to update. It's about to make me lose my client. Help, please.

  We have identified two questions:

  (1) muse implements a markup bad comment, causing in the edition (IBE) browser to display the page properly. Only, this affects IBE and does not affect the published site. The combination of page that causes the bad markup is still TBD.

  (2) IBE does not account for the bad markup that leads to incorrect DOM, leaving IBE unusable.

  We have a fix for IBE (as BC) who is ready to be tested. We will update this thread when the fix is on.

  Sorry for the inconvenience.

  Jason San Jose

• In creative cloud photoshop and bridge are updated, but I don't see any launch icons in the menu of the application. What can I do to open Photoshop CC and CC bridge

  In creative cloud photoshop and bridge are updated, but I don't see any launch icons in the menu of the application. What can I do to open Photoshop CC and CC bridge?

  Run the cleanup tool and reinstall.

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  Mylenium

• Stor.e cloud - dynamic DNS - remote control

  Hello

  I want to use my Stor.e cloud like a cloud. In my home network, all things will work.

  Now, I wanted to set up the network and enable dynamic DNS.
  I registered by freedns.afraid.org, but I only get a URL for the update.
  I do not see what URL should I use the HDD to confiure.

  Can someone help me plese. Or someone make experiences with remote?

  Thanksfor help!

  I found the user manual for this device of Toshiba Stor E Cloud storage
  Stor.e Cloud user manual

  Please see page 41.
  Here you can find information how to set up dynamic DNS using advanced settings

• Satellite S500-10F - slowed down and need BIOS update

  Hello, I would like to know if anyone can help.

  I work for a Borough Council IT Department, so it is quite safe to say that I know a fair bit on THIS and the side material things. We had an about 12 laptops Toshiba Satellite S500 delivered, 11 x S500 - 11 c and 1 x S500-10F. As we do not yet support windows 7 so he must rebuild in Windows XP, install the drivers etc, and send them to schools.

  All S500 - 11 c were built and work without any problem at all. The only difference I see is that the model 10F doesn't have bluetooth so that the model 11 c. Model 10F take image ghost, created from the 11 c, but he likes to be restart every 5 minutes approximately and is extremely slow.

  So I rebuilt the model 10F using our licenses CD XP SP3 Microsoft and started to install drivers etc. When I installed the software of card reader Ricoh the laptop again slowed down (about 5 minutes to start Windows). I used to have a similar problem with a model on the A300 range and I've updated the BIOS which cured the problem. I downloaded the one and only BIOS update on the Toshiba site for the S500 and when I want intsaller, he returned with a message that says "this computer is is not supported.

  If someone at Toshiba can tell me where I can get an update of the BIOS that works for my S500-10F or indeed why my system slowed down to a snails pace after having installed the Ricoh card reader software I would be very grateful. I removed the software and now and disabled without success card reader devices.

  Thank you very much

  Warren Poole

  I can see for this Satellite Pro model 2 drivers are available. The second is O2Micro controller version 1.1.4.207 card reader.
  Have you tried to install it?

• R7500 Dynamic DNS - no ip - manage devices

  Hello

  I had set up dynamic DNS using no. - ip (NETGEAR supplier - "*.") mynetgear.com') on my router R7000, before.

  Now, I changed to a R7500.

  But my noip.com account still has the 'old' R7000 device under host / redirects-> manage devices.

  And I can't seem to remove the R7000 and serial number. (and I don't have the R7000 no more).

  The R7500 refused to apply the account settings for:

  Service provider: NETGEAR

  E-mail:

  Password:

  without any error message.

  I missed something?

  Thank you

  Hello

  I can't remove the R7000 go in my list of devices (or at least, I can't find a delete option).

  BUT after removing the hostname of my old camera AND delete the full host name subsequently (on noip.com), I could re-register the R7500 with my host name. So ultimately it works again!

  Noip.com, on the R7000 is more listed as acive device, but it seems that I can't delete the old of my list.

• I have install fallout 3 and the last update (1.7), but when starting a new game, he tell me that windows is having a problem reading it & then it locksup.

  original title: game Fallout 3 on Windows 7 problem

  I have install fallout 3 and the last update (1.7), but when starting a new game, he tell me that windows is having a problem reading it & then it locksup, I have a Toshiba Satellite, Fallout New Vegas works perfectly on my laptop, how can I play Fallout 3, is here to play Fallout 3 on windows 7.

  Hello

  You can see the link provided. It gives information that Fallout 3 is not compatible with Windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=fallout%203%20

  Windows 7 Compatibility Center: Fallout 3 http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=%20Fallout%203&OS=32-bit

  You may need to contact the manufacturer of game for support

• Constantly, the computer restarts and shows loading updated 3 or 3 then restart screen.

  Constantly, the computer restarts and shows loading updated 3 or 3 then restart screen.  I've tried corrections on support, but nothing works.  Cannot restore previous point form will not work.  Build 6001 of Windows Vista Home Premium service pack 1.  Last updated who worked at April 15, 2011.  Update that keeps restarting on April 28, 2011.  64-bit operating system.  Intel Core 2 Duo E8500 3.16 GHz.  Antivirus Norton 360 Version 4.3.0.5

  Assuming that Win7 64-bit or Vista 64-bit...

  See this discussion: http://answers.microsoft.com/thread/cac55bf2-e271-e011-8dfc-68b599b31bf5 (which now includes a countless number of threads merged to confuse you more).

• Error 80072efe on the same modem and connection that update another pc

  I have a strange problem here

  Let me explain, he

  I have a pc and recently to buy a laptop without any OS

  so I bought a windows 7 Home premium and install it on

  then I want to update with windows update with my internet connection PC (detach the RJ-45 cable from the back of my pc and connect to my laptop and set up IP)

  but I have error 80072efe

  Yet once, plug the cable into my pc and check the update of windows on my pc and he was right

  I don't know if I could explain it clearly or not

  Thank you

  Q: what application or anti-virus security suite is installed...
  A: anything

  Chances are that you see the effects of a hijackware infection. See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Win7: see "using the custom installation option" and formatting the hard drive section ofhttp://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows-7

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum:http://social.answers.microsoft.com/Forums/en-US/w7repair/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft