Seeds of inconsistent reading on multitrack clips?

Similar Questions

• my pc crashed... then repaired... now I can't read my video clips from my camcorder from Toshiba?

  my pc crashed... then repaired... now I can't read my video clips from my camcorder from Toshiba?

  It would be useful to know what camcorder from toshiba.
  Memory, are all quite small pocket, recording cameras a card and HD, probably using mpeg4.
  Your cam will have come with a cd with the right codec on it to allow you to play your files on the pc, you will need to reinstall this software.

• Color of multitrack Clips

  Hey guys -.

  First of all... I LOVE hearing CS6. Tried and this improvement.

  My question may be a bit stupid, so please forgive me.

  I am constantly squinting in mutitrack view, because unless the clip is selected, it appears extremely bleak. Is it possible to change this? It seems that the only thing that changes when playing with the "appearance settings" is the waveform view. I want just the clips to show up a bit more in multitrack view without first having all select them.

  Gavan-

  Hi Gavin,

  Is there a chance that you can attach a screenshot of your multitrack environment?  While the default global interface is dark gray, multitrack clips should display of waveforms in color, you can adjust by clip or by group in the Properties Panel.

  

  

  You can also adjust the default color of waveform in Preferences > appearance who will adjust the default color for multitrack clips.  When they are disabled, the clips ARE dimmed, but the waveform must be visible on its background color.

• Stereo does not read the Sansa Clip after firmware update

  Hello

  I upgraded to the last 2.01.35a of the previous 32.

  Before that, my channel stereo would connect to the Clip and play songs using the USB connection, I can use the remote to change songs, now with the new update of the firmware it does not read the content of the Clip.  Clip said 'Connected', but the stereo repeat me 'Reading' forever.

  I came back to the previous version and it works again.

  Is there a problem with the latest version of the firmware?

  Also, since I was in Europe, Updater I updated the European version and this limited the volume a LOT.  So I downloaded the US version is now at normal volume.  The European version is too quiet and I can't hear a thing if there is a background noise. But still, the USB connection in the stereo works with version 2.01.32 and not 2.01.35.

  any ideas?

  Thank you.

  one.

  Hello

  I tried AutoDetect, MTP and MSC and none worked.

  Now everything works well again, and I will consider the reset factory settings to change the region for other times.

  Thank you.

• Cannot delete the keyframe markers multitrack clip

  Hello, I use Audition for years and teach it to my students.  What Miss me when I can't add keyframes (volume and panning) to the element in the multitrack timeline? When I hover the cursor to move the pan or volume keyframe line tool, I can't drop a keyframe.  What Miss me?  ThanksCan

  Apparently 'Activate keyframes Clip' has not been activated.

• Conversion of a mono * multitrack * clip Stereo

  I have a multitrack project that was exported from Premiere Pro that contains the rough changes to the audio studio raw.

  Many of the clips are mono, having been captured by the microphones of LAV. What I have to do is to convert these clips in place in stereo before finalizing the mix.

  While I can easily convert any clip stereo Waveform Editor, the clip in multitrack session does not change. Even if the clip is on a stereo track, the clip still mono. By dragging the clip to a new stereo track does not work either. The clip still mono.

  If I drag the same item in the files Panel to the timeline, it will be stereo, but then it's not in the right position and (due to the second 1 "margins") not easy to align with the original mono clip. It can be done, but there are many single elements to do.

  What I want is a way to convert a stereo mono clip since breast of the multitrack session, or a way to "recharge" a clip in the same position in a multitrack session, resulting in the stereo clip.

  If there is no way to do it, what should be done?

  Thanks for any help!

  I want back to the basics and ask why you think you need to convert a track mono mic in stereo?  By definition, all the MICS are mono (still called microphones stereo ones just several mono grouped).

  Convert a mono track to stereo waveform can give you a 'stereo' file, but, in reality, there is nothing more than two identical pieces of mono.  Everything you do is double the disk space you need and adding to your load on the processor.

  In any case, this is why I ask the question - it is possible that, instead of having to change your stereo track false that there could be a means of better work around any problem you want to solve.

• How to export multiple multitrack clips - I don't want to mix

  Hello. I can't understand how to export multiple clips in multitrack view. The screenshot should show what I want to do: I have three long pieces, several hours each. I want to cut a part of each track to a single selection. I could do this for every song in my record and then customize the level and EQ for each song, and not for the duration of the track.

  So, how can I do? How to make a selection in the multitrack view and use this selection to produce separate tracks that start and stop at the same place? I don't want to mix. Thank you

  After you make the selection, file-> export-> Audio Mixdown (Ctrl-Shift-Alt-M).  In the dialog box:

  Mix options

  Source: click on the radio button of the track and ' all titles and master (separate files) from the context menu.»

  Range: choose "Selected" from the context menu.

  If you want to see the exported tracks to change immediately, check the box "insert Mixdown into:" and select "Edit View" from the context menu.

• Now all multitrack clips/files screen automatically start time if the limits are adjusted - WHY?

  I'm in the Middle fo a large multitrack session with about 40 different titles and now if I try to set the limits of a clip - any clip, it starts in time stretching automatically - even when the clip not configured if as being closed! Is there a setting that causes this? Can it be fixed or is it just another AA3.0 bug?   Help! -This session has become extremely diificult especially if I adjust a clip limit and this clip starts some knid of mysterious temporal self-generated.

  Any help is greatly appreciarted

  David

  I'm not in the studio at the moment but if I remember you must uncheck "enable Clip Time Stretching" under the "View" menu. "

  I'm sure that clips of blocking time will do the same.

• Make a seeded FDF segment read only dynamically... Urgent!

  Hi all
  
  Is is possible to make only 2 segments on 7, of a FDF read only based on a context value in R12? The page is a page OFA sown under the responsibility of "Oracle installed Base User Agent".
  
  I've browsed the forum and discovered that "you donot handle the FDF segments individually on the Page. but it wasn't with regard to what makes some required and other segments.
  
  Help, please
  
  Thank you and best regards,
  Dean

  Its really simple, you don't have even to extend the controller. The Flex element exposes the property called list of Segment. Just the value as shown above for this property.

  for example: Let's say context is C1 and the segments are S1 to S7, then the list would be something like

  Global data items. global segment1 | global segment2 | ...|| C2 | S1 | S2 | S3($RO$) | S4($RO$) | S5 | S6 | S7 | ...|| C2 |...

  You may notice that all Segment 3 and 4 are marked read only.

  Kind regards
  Guru.

• Can't read some Youtube Clips in Google Earth?

  When you try to play Youtube videos in Google Earth, nothing happens. Instead, I get the request to install the latest version of Adobe Flash Player. I have MODEL the current version of flash player that works for the others depending on Flash websites. I'm on IE 9 and that you have installed Adobe flash player 64-bit. Am at a loss as what to do next. Any help appreciated. Thank you

  Google Earth requires Flash Player for other browsers: Flash Player for other browsers

• Reading frames inconsistent stuttering / deleted

  Only, I went from a mid 2010 Mac Pro to 27 "new IMac 5 K retina display.  I'm working on a one hour program that started on my MacPro.  He's dead, so I moved the project to my MacBook Pro and IMAC.  Images is a mixture of DVCPRO HD 1080/30i. GoPro 1080/30 & 60 P; HDV; Canon 1080/30 p; stills, old and new, some old small, some major & new shot with guns.  Chronology is 1080/30i.

  
  

  During playback of the chronology, I get incompatible stuttering in some plans.  Inconsistent because a specific clip can read without problem once, then next time I play there is obvious stuttering.  Play again and the problem will be displayed in a different place in the clip and it may be better or worse.  could start 3 seconds into the clip, maybe 5 or 7.  I first noticed when editing on my laptop, which is a model of retina 15 "with plenty of Ram and the fastest processor I7 nine last year, which is not all that rare.

  When I moved to the IMac, I did a transfer of the time machine MacPro, being understood, it may not be the best way to launch new aa machine.  After all the questions, I reformatted the IMAC and started from scratch.  Exact same results.

  I drove back from 2014, 8.2 to 7 CC and playback smoothed in some test shots I brought in a new project.  I also tried to export a few minutes of the hardest parts of the timeline in a H264 file and it read smoothly, so, apparently, that the file is not corrupted just reading.  Fortunately I'm not editing with the client, so that the element is mute, but I occasionally customers here and this kind of reading isn't great for show work.

  
  

  I spent a few days and several hours on the phone with tech support without a solution to the problem.

  
  

  I also tried the plans incriminated in FCP7 and they reproduce uniformly smooth.  Older DVCPRO HD and HDV clips were captured in FCP7, so I took the first Pro, thinking that for some reason may have been the cause, but the results are the same.
  

  
  

  I'm at the end of what some "Wit", I left and would be very grateful for any suggestions on a solution.  Also when I reinstalled my plugins and Prime Minister they are not appearing in PP.  When I look in the library only 7.0 is there with of course my plugins.  How can I get 8.2 to be present.  just add a new folder and drag the plugins from 7 to 8?  Plugins are only creative culture Impatience to feathers.  Boris Continuum 9 Image restoration and Sonicfire Pro.

  
  

  THX... Jim Watt

  IMac (retina 5K, 27 inches, end of 2014)

  Processor: Intel Core i7 4 GHz

  Memory: 32 GB 1600 MHz DDR3

  Boot disk: Mac HD/3 TB Fusion

  Chart: AMD Radeon R9 M295X 4096 MB

  Video player: Raid 6 to '0' in OWC Raid housing

  Write speed: 328 MB/s

  Reading 333.7 MB/s

  First Pro CC 8.2

  2 additional HDMI monitors

  Determined that it was a hardware problem because stuttering also happened to format Quicktime.  Back Apple's IMac to an Exchange which should arrive next week.  I hope that reading not more jerky.  Exports also played fine.

  JW

• Always unwanted clicking sound on both ends of a clip

  When I put voice segments together in the multitrack session I get this annoying "click on" sound, or a glitch, at the beginning of each clip. It ruins everything naturally and makes my unnecessary records. They are not on the record, but do occur when I set up the Audition segments. Seems to me that the hearing cannot handle the process of putting clips together? Whenever the bar reached the beginning of the next clip that annoying sound comes in. It's like an electrical impulse or something, difficult to describe. I did a test with no noise in the clips, just add them, the sound of glitch was not there then. When I mark a section in a clip and add silence and operate the read head just inside that segment the sound is in the beginning and the end as well. As if the software is actually produce these signals. When I edit each clip solitaire I try to add a segment to the silence of death in the beginning and the end, when to re-enter the multitrack session again to play what seems to have removed most of the unwanted clicks but then the mixture is more loose with the longer time between clips, and not the way I wanted it to be. I do the voice at work, this problem only on the voice recording. The record microphone went very well, sound when I start putting clips and sections together in multitrack mode starting with these problems occur.

  I have heard others complain about the same thing here and there. A bug?

  perrybrus wrote:

  I have heard others complain about the same thing here and there. A bug?

  My God, no. Fair waveforms not mating at intersections and jumping rather abruptly from one level to another. If you place in multitrack clips, then put it while they auto-crossfade when set on the same track - all you have to do is drag one over the other for a few milliseconds stop what is happening. It is the way to get silent changes. If you go into Preferences > multitrack clips, you will find the available options.

• question of myRIO sequential clip

  Hello

  I realized a CLIP, and I wonder how to implement it.

  The vhdl code is used to send data on the falling clock edge and read in the data on the falling clock edge.

  Send and receive takes about 30 clockcycles. The code is based on a state machine and starts to send once an enable signal is given. Transmit/receive all the bits, he returned to idle.

  I read that the CLIP would go even if it is not placed in a loop. However, when I do a test vi that has an LED connected to a few outings, it seems that it is only launched once? Or is it actually running, but the LED is not updated? I don't know how to implement is.

  Use this CLIP in a time loop of single cycle? He would still use the fronts and the clock edge? And it would cause problems because it is sequential and combinational not?

  Thank you for your help.

  kind regards,

  Bastiaan

  Hi Bastiaan,

  You read a 40 MHz signal each 25ns. So that means that you will read the same value of the signal in each iteration you will always show the same value and you will have a consistent performance. In order to get a signal to the correct frequency on you must perform the loop with a frequency of at least double the signal. You can create a clock FPGA derived in the way that this article describes. Use a clock of 80 MHz for the SCTL.

  http://zone.NI.com/reference/en-XX/help/371599H-01/lvfpgahelp/creating_fpga_derived_clk/

  Let me know if it helps.

  Kind regards

  Tom

• Sansa Clip + with Sandisk Micro SDHC

  Hi, I want to buy the Sansa Clip + and Micro SDHC 32 GB class 10 cards (specifically Sandisk MicroSDHC Card Ultra 32 GB class 10).

  Someone can confirm the compatibility of these things or give me advice on the card should I buy 32 GB class10 because I read here Sansa Clip + have problems with class 10 cards.

  just bought the hat card this week and it works very well for the me... until now.

  The player is the Zip Clip. I have not yet tried in my Clip +.

• Clip + does not accept the song title or album edits

  When I try to change the information in the title of a song or an album on the Clip + when you are connected to the PC it shows up correctly as long as it is still connected to the PC. When unplugged and read on the Clip + it appears simply as a bunch of numbers and letters. If I make the change on my PC first and then remove Clip + enter and drag and drop PC all edited version is fine. Any ideas?

  Thank you very much for your detailed explanation. Sorry it took me awhile to recognize your answer, gone for a few days. I always put my Clip + auto detect as you thought. I never really knew what that assumed this auto and pertained to detect would do the right thing. I note that mt newest Clip of Sport doesn't have a setting mode but I can edit entries in internal and external, without the same issues I described in my Clip +. Really, I use WMP with my Sansa stuff, but the version that I run for reading is WMP 12. So if I understand correctly I need to set the mode of meteorological service of the Canada? Right now my Clip + is empty, then I'll experiences.

  Thank you very much!

  Beachromo